#this is config file for zhcon
#it can be named as ~/.zhconrc or /etc/zhcon.conf
#you can edit it manually
#zhconpath = /usr/local/lib/zhcon/
#unicon(3.x) path
uniconpath = /usr/lib/unicon/
#defaultencode: default encoding can be :gb2312,gbk,big5,jis,ksc
defaultencode = gb2312
#autoencode: auto detect current Chinese encoding(GB2312 or BIG5)
#when autoencode is set zhcon will try to detect current Chinese encoding
#after idle 1 second and change current Chinese encoding to
#GB2312 or BIG5.This function is useful if you are viewing many text files
#with different encoding type.
#auto,auto-gb,auto-big5,manual
autoencode = manual
#screen resolution
#NOTE:
# 1) These only works on FreeBSD. On Linux these options will be IGNORED!
# 2) If your FreeBSD kernel has VESA support compiled in(with
# "options VESA") and your display adapter support VESA(most cards will
# do), you can set color_depth to 8 or higher. This means you can use
# 640x480x256 colors, 640x480x65536 colors, 800x600x256 colors...etc
# BUT you will not able to use 640x480x16 colors! (Of course I don't
# think you will want to run 16 colors mode at all :))
# 3) If your FreeBSD kernel has not VESA support(or you even don't know
# what's kernel or what's VESA), you can only set color_depth to 4.
# That is, you can only run 16 colors mode(VERY slowly).
# 4) Ok, if you don't understand me at all, it's OK. Just go and find a
# FreeBSD wizard and ask him to compile a new kernel with VESA support
# for you and ... emmmm ... explain all these stuff to you ...
#
x_resolution = 640
y_resolution = 480
# 4 bits = 16 colors, 8 bits = 256 colors, 16 bits = 64K colors, and so on..
# By defalut, 640X480X16 color is used to support as many video cards as
# possible. zhcon works very SLOWLY under this mode. You should try setting
# color_depth=8 to use 256 color (VESA mode) after recompiling your kernel
# with VESA support to gain most out of your hardware.
color_depth = 4
#blanklineheight must >= 0
blanklineheight = 1
#0, default(block); 1, none; 2, underline
#3, 1/3 block; 4, 1/2 block; 5, 2/3 block; 6, block
cursortype = 6
beep = on
#whether to display startup message
startupmsg = on
#whether to enter prompt mode when start
#you can enter prompt mode by press CTRL-ALT-0
promptmode = off
# set font name, all font must be placed in PREFIX/lib/zhcon/
# for use with 24 pixel font
# ascfont = font/asc24.bpsf
# gbfont = font/gb-24-kai.bpsf
ascfont = font/asc16.bpsf
gbfont = font/gb-16.bpsf
gbkfont = font/gbk-16.bpsf
big5font = font/big5-16.bpsf
jisfont = font/jis-16.bpsf
kscfont = font/ksc-16.bpsf
#inputstyle: overspot or nativebar
inputstyle = overspot
# color scheme format
# text's fore, back, color1, color2, frame's light, dark color
# change push style to pop by swap frame's light/dark color
# red style = 15,4,11,14,12,0
# blue style = 15,1,11,14,9,0
# white style = 0,7,1,1,15,8
overspotcolor = 0,7,1,1,15,8
nativebarcolor = 15,4,11,14,0,12
showtips = on
#change input method here
#the first ime is the default ime when press CTRL_SPACE
#only the first nine imes are avaiable to zhcon
#you can add more ime from Chinput's config file
#format: ime = imename,module,table,encode,type
#imename :=
#module :=
#table :=