/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */
/*
    Grig:  Gtk+ user interface for the Hamradio Control Libraries.

    Copyright (C)  2001-2006  Alexandru Csete.

    Authors: Alexandru Csete <csete@users.sourceforge.net>

    Comments, questions and bugreports should be submitted via
    http://sourceforge.net/projects/groundstation/
    More details can be found at the project home page:

            http://groundstation.sourceforge.net/
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
  
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
  
    You should have received a copy of the GNU General Public License
    along with this program; if not, visit http://www.fsf.org/
 
 
 
 
*/
#ifndef RIG_DAEMON_H
#define RIG_DAEMON_H 1




#define C_MAX_CMD_PER_CYCLE   101   /*!< Max number of commands executed in one cycle */
#define C_MAX_CYCLES          6    /*!< Number of cycles */

#define C_DEF_RX_CMD_DELAY    10   /*!< Default delay between two RX commands [msec] */


#define C_RIG_DAEMON_STOP_TIMEOUT 10000  /*!< Timeout to let the daemon process stop [msec] */
#define C_RIG_DAEMON_STOP_SLEEP_TIME 100 /*!< Time to sleep between succesive attempts to cheack the clear flag. [msec] */


/** \brief List of available commands.
 *
 * This enumeration lists the available commands that can be executed by the RIG daemon.
 * These values should be used to define each daemon cycle.
 */
typedef enum {
	RIG_CMD_NONE = 0,     /*!< Not command. Can be used for delays between commands. */

	RIG_CMD_GET_FREQ_1,    /*!< Command to acquire primary frequency from rig. */
	RIG_CMD_SET_FREQ_1,    /*!< Command to set primary frequency. */
	RIG_CMD_GET_FREQ_2,    /*!< Command to acquire secondary frequency from rig. */
	RIG_CMD_SET_FREQ_2,    /*!< Command to set secondary frequency. */
	RIG_CMD_GET_RIT,       /*!< Command to get current RIT value. */
	RIG_CMD_SET_RIT,       /*!< Command to set new RIT value. */
	RIG_CMD_GET_XIT,       /*!< Command to get current XIT value. */
	RIG_CMD_SET_XIT,       /*!< Command to set new XIT value. */
	RIG_CMD_GET_VFO,       /*!< Command to get currently active VFO. */      
	RIG_CMD_SET_VFO,       /*!< Command to select new VFO. */
	RIG_CMD_GET_PSTAT,     /*!< Command to read power status (mains pwr, ON/OFF/STDBY). */
	RIG_CMD_SET_PSTAT,     /*!< Command to set new power status (ON/OFF/STDBY). */
	RIG_CMD_GET_PTT,       /*!< Command to get the current PTT status. */
	RIG_CMD_SET_PTT,       /*!< Command to set the current PTT status. */
	RIG_CMD_GET_MODE,      /*!< Command to get the current mode and passband width. */
	RIG_CMD_SET_MODE,      /*!< Command to set the new mode and/or passband width. */
	RIG_CMD_GET_AGC,       /*!< Command to get the automatic gain control level. */
	RIG_CMD_SET_AGC,       /*!< Command to set the automatic gain control level. */
	RIG_CMD_GET_ATT,       /*!< Command to get the attenuator level. */
	RIG_CMD_SET_ATT,       /*!< Command to set the attenuator level. */
	RIG_CMD_GET_PREAMP,    /*!< Command to get the pre-amplifier level. */
	RIG_CMD_SET_PREAMP,    /*!< Command to set the pre-amplifier level. */
	RIG_CMD_SET_SPLIT,     /*!< Command to set split mode ON/OFF. */
	RIG_CMD_GET_SPLIT,     /*!< Command to retrieve the current status of split. */

	/* levels */
	RIG_CMD_SET_AF,
	RIG_CMD_GET_AF,
	RIG_CMD_SET_RF,
	RIG_CMD_GET_RF,
	RIG_CMD_SET_SQL,
	RIG_CMD_GET_SQL,
	RIG_CMD_SET_IFS,
	RIG_CMD_GET_IFS,
	RIG_CMD_SET_APF,
	RIG_CMD_GET_APF,
	RIG_CMD_SET_NR,
	RIG_CMD_GET_NR,
	RIG_CMD_SET_NOTCH,
	RIG_CMD_GET_NOTCH,
	RIG_CMD_SET_PBT_IN,
	RIG_CMD_GET_PBT_IN,
	RIG_CMD_SET_PBT_OUT,
	RIG_CMD_GET_PBT_OUT,
	RIG_CMD_SET_CW_PITCH,
	RIG_CMD_GET_CW_PITCH,
	RIG_CMD_SET_KEYSPD,
	RIG_CMD_GET_KEYSPD,
	RIG_CMD_SET_BKINDEL,
	RIG_CMD_GET_BKINDEL,
	RIG_CMD_SET_BALANCE,
	RIG_CMD_GET_BALANCE,
	RIG_CMD_SET_VOXDEL,
	RIG_CMD_GET_VOXDEL,
	RIG_CMD_SET_VOXGAIN,
	RIG_CMD_GET_VOXGAIN,
	RIG_CMD_SET_ANTIVOX,
	RIG_CMD_GET_ANTIVOX,
	RIG_CMD_SET_MICGAIN,
	RIG_CMD_GET_MICGAIN,
	RIG_CMD_SET_COMP,
	RIG_CMD_GET_COMP,

	RIG_CMD_GET_STRENGTH,  /*!< Command to get signal strength. */
	RIG_CMD_SET_POWER,     /*!< Command to set TX power. */
	RIG_CMD_GET_POWER,     /*!< Command to get TX power. */
	RIG_CMD_GET_SWR,       /*!< Command to get SWR level. */
	RIG_CMD_SET_ALC,       /*!< Command to set ALC level. */
	RIG_CMD_GET_ALC,       /*!< Command to get ALC level. */

	RIG_CMD_GET_LOCK,      /*!< Command to get LOCK status. */
	RIG_CMD_SET_LOCK,      /*!< Command to set LOCK status. */

	RIG_CMD_VFO_TOGGLE,    /*!< Executes RIG_OP_TOGGLE. */
	RIG_CMD_VFO_COPY,      /*!< Executes RIG_OP_CPY. */
	RIG_CMD_VFO_XCHG,      /*!< Executes RIG_OP_XCHG. */

	RIG_CMD_NUMBER         /*!< Number of available commands. */
} rig_cmd_t;



int       rig_daemon_start       (int, const gchar *,
				  int, const gchar *,
				  const gchar *, gint,
				  gboolean, gboolean, gboolean);
void      rig_daemon_stop        (void);
void      rig_daemon_set_suspend (gboolean);
gboolean  rig_daemon_get_suspend (void);
gchar    *rig_daemon_get_brand   (void);
gchar    *rig_daemon_get_model   (void);
gint      rig_daemon_get_rig_id  (void);
gint      rig_daemon_get_delay   (void);

#endif