#! /bin/sh # Generated automatically by configure. # Run this file to recreate the current configuration. # This directory was configured as follows, # on host darwintel: # # ./configure --enable-sandboxed --with-devdir=/var/run/lirc --with-driver=irman --with-driver=dvico --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --prefix=/usr/local i386-unknown-gnu # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]" for ac_option do case "$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running ${CONFIG_SHELL-/bin/sh} ./configure --enable-sandboxed --with-devdir=/var/run/lirc --with-driver=irman --with-driver=dvico --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --prefix=/usr/local i386-unknown-gnu --no-create --no-recursion" exec ${CONFIG_SHELL-/bin/sh} ./configure --enable-sandboxed --with-devdir=/var/run/lirc --with-driver=irman --with-driver=dvico --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --prefix=/usr/local i386-unknown-gnu --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "./config.status generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "$ac_cs_usage"; exit 0 ;; *) echo "$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=. ac_given_INSTALL="/usr/local/bin/ginstall -c" trap 'rm -fr Makefile drivers/Makefile drivers/lirc_atiusb/Makefile drivers/lirc_bt829/Makefile drivers/lirc_cmdir/Makefile drivers/lirc_dev/Makefile drivers/lirc_gpio/Makefile drivers/lirc_i2c/Makefile drivers/lirc_igorplugusb/Makefile drivers/lirc_imon/Makefile drivers/lirc_it87/Makefile drivers/lirc_mceusb/Makefile drivers/lirc_mceusb2/Makefile drivers/lirc_parallel/Makefile drivers/lirc_sasem/Makefile drivers/lirc_serial/Makefile drivers/lirc_sir/Makefile drivers/lirc_streamzap/Makefile daemons/Makefile tools/Makefile doc/Makefile doc/man/Makefile config.h conftest*; exit 1' 1 2 15 # Protect against being on the right side of a sed subst in config.status. sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g; s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF /^[ ]*VPATH[ ]*=[^:]*$/d s%@SHELL@%/bin/sh%g s%@CFLAGS@%-O2 -g -Wall%g s%@CPPFLAGS@%%g s%@CXXFLAGS@%-fno-common%g s%@FFLAGS@%%g s%@DEFS@%-DHAVE_CONFIG_H%g s%@LDFLAGS@%%g s%@LIBS@%%g s%@exec_prefix@%${prefix}%g s%@prefix@%/usr/local%g s%@program_transform_name@%s,x,x,%g s%@bindir@%${exec_prefix}/bin%g s%@sbindir@%${exec_prefix}/sbin%g s%@libexecdir@%${exec_prefix}/libexec%g s%@datadir@%${prefix}/share%g s%@sysconfdir@%/etc%g s%@sharedstatedir@%${prefix}/com%g s%@localstatedir@%/var%g s%@libdir@%${exec_prefix}/lib%g s%@includedir@%${prefix}/include%g s%@oldincludedir@%/usr/include%g s%@infodir@%${prefix}/info%g s%@mandir@%${prefix}/man%g s%@INSTALL_PROGRAM@%${INSTALL}%g s%@INSTALL_SCRIPT@%${INSTALL_PROGRAM}%g s%@INSTALL_DATA@%${INSTALL} -m 644%g s%@PACKAGE@%lirc%g s%@VERSION@%0.8.0%g s%@EXEEXT@%%g s%@OBJEXT@%o%g s%@ACLOCAL@%${SHELL} /mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/missing --run aclocal%g s%@AUTOCONF@%${SHELL} /mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/missing --run autoconf%g s%@AUTOMAKE@%${SHELL} /mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/missing --run automake%g s%@AUTOHEADER@%${SHELL} /mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/missing --run autoheader%g s%@MAKEINFO@%${SHELL} /mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/missing --run makeinfo%g s%@AMTAR@%${SHELL} /mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/missing --run tar%g s%@install_sh@%/mnt/gmirror/ports/comms/lirc/work/lirc-0.8.0/install-sh%g s%@INSTALL_STRIP_PROGRAM@%${SHELL} $(install_sh) -c -s%g s%@AWK@%mawk%g s%@SET_MAKE@%%g s%@AMDEP_TRUE@%%g s%@AMDEP_FALSE@%#%g s%@AMDEPBACKSLASH@%\%g s%@DEPDIR@%.deps%g s%@CC@%cc%g s%@am__include@%include%g s%@am__quote@%%g s%@CCDEPMODE@%depmode=gcc3%g s%@mknod@%/usr/local/bin/mknod%g s%@mkfifo@%/usr/local/bin/mkfifo%g s%@depmod@%/sbin/depmod%g s%@LIBUSB_CONFIG@%/usr/local/bin/libusb-config%g s%@LN_S@%ln -s%g s%@host@%i386-unknown-gnu%g s%@host_alias@%i386-unknown-gnu%g s%@host_cpu@%i386%g s%@host_vendor@%unknown%g s%@host_os@%gnu%g s%@build@%i386-unknown-gnu%g s%@build_alias@%i386-unknown-gnu%g s%@build_cpu@%i386%g s%@build_vendor@%unknown%g s%@build_os@%gnu%g s%@ECHO@%echo%g s%@RANLIB@%ranlib%g s%@STRIP@%strip%g s%@CPP@%cc -E%g s%@LIBTOOL@%$(SHELL) /usr/local/bin/libtool%g s%@X_CFLAGS@% -I/usr/X11R6/include%g s%@X_PRE_LIBS@% -lSM -lICE%g s%@X_LIBS@% -L/usr/X11R6/lib%g s%@X_EXTRA_LIBS@%%g s%@USE_FIFOS_TRUE@%%g s%@USE_FIFOS_FALSE@%#%g s%@ac_pkss_mktemp@%yes%g s%@kerneldir@%not running Linux%g s%@kernelcc@%%g s%@kernelext@%ko%g s%@SANDBOXED_TRUE@%%g s%@SANDBOXED_FALSE@%#%g s%@daemon@%%g s%@forkpty@%%g s%@devdir@%/var/run/lirc%g s%@moduledir@%/lib/modules/8.0.1/misc%g s%@lirc_major@%61%g s%@driver@%dvico%g s%@lirc_driver@%%g s%@irman_lib@%%g s%@caraca_lib@%%g s%@portaudio_lib@%%g s%@alsa_lib@%%g s%@atilibusb_lib@%%g s%@vga_progs@%%g s%@x_progs@%irxevent xmode2%g s%@hw_module@%hw_hiddev.o%g s%@irtty@%%g s%@lircd_conf@%dvico/lircd.conf.fusionHDTV%g s%@lircmd_conf@%%g s%@maintmode_daemons_extra@%%g CEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi CONFIG_FILES=${CONFIG_FILES-"Makefile drivers/Makefile drivers/lirc_atiusb/Makefile drivers/lirc_bt829/Makefile drivers/lirc_cmdir/Makefile drivers/lirc_dev/Makefile drivers/lirc_gpio/Makefile drivers/lirc_i2c/Makefile drivers/lirc_igorplugusb/Makefile drivers/lirc_imon/Makefile drivers/lirc_it87/Makefile drivers/lirc_mceusb/Makefile drivers/lirc_mceusb2/Makefile drivers/lirc_parallel/Makefile drivers/lirc_sasem/Makefile drivers/lirc_serial/Makefile drivers/lirc_sir/Makefile drivers/lirc_streamzap/Makefile daemons/Makefile tools/Makefile doc/Makefile doc/man/Makefile "} for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then CONFIG_HEADERS="config.h" fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done am_indx=1 for am_file in config.h; do case " $CONFIG_HEADERS " in *" $am_file "*) am_dir=`echo $am_file |sed 's%:.*%%;s%[^/]*$%%'` if test -n "$am_dir"; then am_tmpdir=`echo $am_dir |sed 's%^\(/*\).*$%\1%'` for am_subdir in `echo $am_dir |sed 's%/% %'`; do am_tmpdir=$am_tmpdir$am_subdir/ if test ! -d $am_tmpdir; then mkdir $am_tmpdir fi done fi echo timestamp > "$am_dir"stamp-h$am_indx ;; esac am_indx=`expr $am_indx + 1` done AMDEP_TRUE="" ac_aux_dir="." test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do case "$mf" in Makefile) dirpart=.;; */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; *) continue;; esac grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`echo "$file" | sed -e 's|/[^/]*$||'` $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done exit 0