#! /bin/sh LIRC_VERSION="0.8.0" ############################################################################# ## Default Values COM1_PORT=0x3f8 COM2_PORT=0x2f8 COM3_PORT=0x3e8 COM4_PORT=0x2e8 COM1_IRQ=4 COM2_IRQ=3 COM3_IRQ=4 COM4_IRQ=3 LPT1_PORT=0x378 LPT2_PORT=0x278 LPT3_PORT=0x3bc LPT1_IRQ=7 LPT2_IRQ=5 LPT3_IRQ=none LIRC_DRIVER="serial" LIRC_MAJOR=61 SELECTED_DRIVER="" DRIVER_PARAMETER="com1" DRIVER_PARAM_TYPE="" SOFT_CARRIER="on" TRANSMITTER="on" IGOR="off" TIMER=65536 X11_WINDOWS="on" DEBUG="off" NO_DAEMONIZE="off" NO_LONG_CODES="off" DYNCODES="off" USE_SYSLOG="off" ############################################################################# ## Variables BACKTITLE="LIRC $LIRC_VERSION Configuration" TEMP=".setup.tmp" CONFIG=".setup.config" START="configure.sh" CONFIGURE=no MAIN_MENU_TEXT="Welcome to the LIRC Configuration Menu. Here you" MAIN_MENU_TEXT="$MAIN_MENU_TEXT can configure the driver and some compile-time" MAIN_MENU_TEXT="$MAIN_MENU_TEXT settings for LIRC applications." CONFIG_DRIVER_TEXT="Please select a driver, that supports your hardware." CONFIG_SOFTWARE_TEXT="Here you can change some compile-time settings for LIRC applications" SET_PORT_TEXT="Either choose a predefined I/O base address/IRQ combination, or enter costum values" SET_PORT_TEXT="$SET_PORT_TEXT Hint: use to choose and to proceed" SET_TTY_TEXT="Choose the tty where your hardware is available." GET_PORT_TEXT="Enter the I/O base address followed with a space and the IRQ (none for no IRQ)" ############################################################################# ## Functions GetSelectedDriver () { COM1="off"; COM2="off"; COM3="off"; COM4="off" LPT1="off"; LPT2="off"; LPT3="off"; USER="off" IRTTY="none" if test "$DRIVER_PARAMETER" = "btty"; then IRTTY="/dev/rfcomm0"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "ttyUSB1"; then COM1="on"; IRTTY="/dev/ttyUSB0"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "ttyUSB2"; then COM2="on"; IRTTY="/dev/ttyUSB1"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "ttyUSB3"; then COM3="on"; IRTTY="/dev/ttyUSB2"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "ttyUSB4"; then COM4="on"; IRTTY="/dev/ttyUSB3"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "com1"; then COM1="on"; LIRC_PORT=$COM1_PORT; LIRC_IRQ=$COM1_IRQ elif test "$DRIVER_PARAMETER" = "com2"; then COM2="on"; LIRC_PORT=$COM2_PORT; LIRC_IRQ=$COM2_IRQ elif test "$DRIVER_PARAMETER" = "com3"; then COM3="on"; LIRC_PORT=$COM3_PORT; LIRC_IRQ=$COM3_IRQ elif test "$DRIVER_PARAMETER" = "com4"; then COM4="on"; LIRC_PORT=$COM4_PORT; LIRC_IRQ=$COM4_IRQ elif test "$DRIVER_PARAMETER" = "tty1"; then COM1="on"; IRTTY="/dev/ttyS0"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "tty2"; then COM2="on"; IRTTY="/dev/ttyS1"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "tty3"; then COM3="on"; IRTTY="/dev/ttyS2"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "tty4"; then COM4="on"; IRTTY="/dev/ttyS3"; LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "lpt1"; then LPT1="on"; LIRC_PORT=$LPT1_PORT; LIRC_IRQ=$LPT1_IRQ elif test "$DRIVER_PARAMETER" = "lpt2"; then LPT2="on"; LIRC_PORT=$LPT2_PORT; LIRC_IRQ=$LPT2_IRQ elif test "$DRIVER_PARAMETER" = "lpt3"; then LPT3="on"; LIRC_PORT=$LPT3_PORT; LIRC_IRQ=$LPT3_IRQ elif test "$DRIVER_PARAMETER" = "none"; then LIRC_PORT="none"; LIRC_IRQ="none" elif test "$DRIVER_PARAMETER" = "user"; then USER="on" fi SELECTED_DRIVER="driver:$LIRC_DRIVER" if test "$LIRC_PORT" != "none"; then SELECTED_DRIVER="$SELECTED_DRIVER io:$LIRC_PORT"; fi if test "$LIRC_IRQ" != "none"; then SELECTED_DRIVER="$SELECTED_DRIVER irq:$LIRC_IRQ"; fi if test "$IRTTY" != "none"; then SELECTED_DRIVER="$SELECTED_DRIVER tty:$IRTTY"; fi } GetPortAndIrq () { dialog --clear --backtitle "$BACKTITLE" \ --title "Enter I/O base address and IRQ" \ --inputbox "$GET_PORT_TEXT" 9 74 "$LIRC_PORT $LIRC_IRQ" \ 2> $TEMP if test "$?" = "0"; then { set `cat $TEMP` LIRC_PORT=$1 LIRC_IRQ=$2 } else return 1; fi } SetPortAndIrq () { if test "$DRIVER_PARAM_TYPE" = "com"; then { dialog --clear --backtitle "$BACKTITLE" \ --title "Specify I/O base address and IRQ of your hardware" \ --radiolist "$SET_PORT_TEXT" 14 74 5 \ 1 "COM1 ($COM1_PORT, $COM1_IRQ)" $COM1 \ 2 "COM2 ($COM2_PORT, $COM2_IRQ)" $COM2 \ 3 "COM3 ($COM3_PORT, $COM3_IRQ)" $COM3 \ 4 "COM4 ($COM4_PORT, $COM4_IRQ)" $COM4 \ 9 "Other (custom values)" $USER \ 2> $TEMP if test "$?" = "0"; then { set `cat $TEMP` if test "$1" = "1"; then DRIVER_PARAMETER="com1" elif test "$1" = "2"; then DRIVER_PARAMETER="com2" elif test "$1" = "3"; then DRIVER_PARAMETER="com3" elif test "$1" = "4"; then DRIVER_PARAMETER="com4" elif test "$1" = "9"; then DRIVER_PARAMETER="user"; GetPortAndIrq fi GetSelectedDriver } else return 1; fi } elif test "$DRIVER_PARAM_TYPE" = "lpt"; then { dialog --clear --backtitle "$BACKTITLE" \ --title "Specify I/O base address and IRQ of your hardware" \ --radiolist "$SET_PORT_TEXT" 13 74 4 \ 1 "LPT1 ($LPT1_PORT, $LPT1_IRQ)" $LPT1 \ 2 "LPT2 ($LPT2_PORT, $LPT2_IRQ)" $LPT2 \ 3 "LPT3 ($LPT3_PORT, $LPT3_IRQ)" $LPT3 \ 9 "Other (custom values)" $USER \ 2> $TEMP if test "$?" = "0"; then { set `cat $TEMP` if test "$1" = "1"; then DRIVER_PARAMETER="lpt1" elif test "$1" = "2"; then DRIVER_PARAMETER="lpt2" elif test "$1" = "3"; then DRIVER_PARAMETER="lpt3" elif test "$1" = "9"; then DRIVER_PARAMETER="user"; GetPortAndIrq fi GetSelectedDriver } else return 1; fi } elif test "$DRIVER_PARAM_TYPE" = "tty"; then { dialog --clear --backtitle "$BACKTITLE" \ --title "Select tty to use" \ --radiolist "$SET_TTY_TEXT" 13 74 6 \ 1 "COM1 (/dev/ttyS0)" $COM1 \ 2 "COM2 (/dev/ttyS1)" $COM2 \ 3 "COM3 (/dev/ttyS2)" $COM3 \ 4 "COM4 (/dev/ttyS3)" $COM4 \ 2> $TEMP } if test "$?" = "0"; then { set `cat $TEMP` if test "$1" = "1"; then DRIVER_PARAMETER="tty1" elif test "$1" = "2"; then DRIVER_PARAMETER="tty2" elif test "$1" = "3"; then DRIVER_PARAMETER="tty3" elif test "$1" = "4"; then DRIVER_PARAMETER="tty4" fi GetSelectedDriver } else return 1; fi elif test "$DRIVER_PARAM_TYPE" = "ttyUSB"; then { dialog --clear --backtitle "$BACKTITLE" \ --title "Select tty to use" \ --radiolist "$SET_TTY_TEXT" 13 74 6 \ 1 "/dev/ttyUSB0" $COM1 \ 2 "/dev/ttyUSB1" $COM2 \ 3 "/dev/ttyUSB2" $COM3 \ 4 "/dev/ttyUSB3" $COM4 \ 2> $TEMP } if test "$?" = "0"; then { set `cat $TEMP` if test "$1" = "1"; then DRIVER_PARAMETER="ttyUSB1" elif test "$1" = "2"; then DRIVER_PARAMETER="ttyUSB2" elif test "$1" = "3"; then DRIVER_PARAMETER="ttyUSB3" elif test "$1" = "4"; then DRIVER_PARAMETER="ttyUSB4" fi GetSelectedDriver } else return 1; fi fi return 0; } DriverOptions () { if test "$LIRC_DRIVER" = "serial"; then { dialog --clear --backtitle "$BACKTITLE" \ --title "Driver specific Options" \ --checklist "" 10 74 3 \ 1 "With transmitter diode" $TRANSMITTER \ 2 "Software generated carrier" $SOFT_CARRIER \ 3 "Igor Cesko's variation" $IGOR \ 2> $TEMP if test "$?" = "0"; then { set -- `cat $TEMP` SOFT_CARRIER="off" TRANSMITTER="off" IGOR="off" for ITEM in $@; do { if test $ITEM = "1" || test $ITEM = "\"1\""; then TRANSMITTER="on"; elif test $ITEM = "2" || test $ITEM = "\"2\""; then SOFT_CARRIER="on"; elif test $ITEM = "3" || test $ITEM = "\"3\""; then IGOR="on"; fi } done # if test "$TRANSMITTER" = "off"; then SOFT_CARRIER="off"; fi } else return 1; fi } elif test "$LIRC_DRIVER" = "parallel"; then { dialog --clear --backtitle "$BACKTITLE" \ --title "Driver specific Options" \ --inputbox "Timer value for parallel port driver" 9 74 "$TIMER" \ 2> $TEMP if test "$?" = "0"; then { set `cat $TEMP` TIMER=$1 } else return 1; fi } fi return 0; } ConfigDriver () { . ./setup-driver.sh if test "$?" = "0"; then GetSelectedDriver SetPortAndIrq if test "$?" = "0"; then DriverOptions fi fi } ConfigSoftware () { dialog --clear --backtitle "$BACKTITLE" \ --title "Software Configuration" \ --checklist "$CONFIG_SOFTWARE_TEXT" 14 74 6 \ 1 "Compile tools for X-Windows" $X11_WINDOWS \ 2 "Compile with DEBUG code" $DEBUG \ 3 "Disable daemonize" $NO_DAEMONIZE \ 4 "Disable long codes" $NO_LONG_CODES \ 5 "Use syslogd instead of own log-file" $USE_SYSLOG \ 6 "Enable dynamic codes" $DYNCODES 2>$TEMP if test "$?" = "0"; then { set -- `cat $TEMP` X11_WINDOWS="off"; DEBUG="off"; NO_DAEMONIZE="off"; NO_LONG_CODES="off" USE_SYSLOG="off"; DYNCODES="off" for ITEM in $@; do { if test $ITEM = "1" || test $ITEM = "\"1\""; then X11_WINDOWS="on" elif test $ITEM = "2" || test $ITEM = "\"2\""; then DEBUG="on" elif test $ITEM = "3" || test $ITEM = "\"3\""; then NO_DAEMONIZE="on" elif test $ITEM = "4" || test $ITEM = "\"4\""; then NO_LONG_CODES="on" elif test $ITEM = "5" || test $ITEM = "\"5\""; then USE_SYSLOG="on" elif test $ITEM = "6" || test $ITEM = "\"6\""; then DYNCODES="on" fi } done } fi } SaveConfig () { echo "LIRC_DRIVER=$LIRC_DRIVER" >$CONFIG echo "LIRC_PORT=$LIRC_PORT" >>$CONFIG echo "LIRC_IRQ=$LIRC_IRQ" >>$CONFIG echo "LIRC_MAJOR=$LIRC_MAJOR" >>$CONFIG echo "IRTTY=$IRTTY" >>$CONFIG echo "DRIVER_PARAMETER=$DRIVER_PARAMETER" >>$CONFIG echo "SOFT_CARRIER=$SOFT_CARRIER" >>$CONFIG echo "TRANSMITTER=$TRANSMITTER" >>$CONFIG echo "IGOR=$IGOR" >>$CONFIG echo "TIMER=$TIMER" >>$CONFIG echo "X11_WINDOWS=$X11_WINDOWS" >>$CONFIG echo "DEBUG=$DEBUG" >>$CONFIG echo "NO_DAEMONIZE=$NO_DAEMONIZE" >>$CONFIG echo "NO_LONG_CODES=$NO_LONG_CODES" >>$CONFIG echo "USE_SYSLOG=$USE_SYSLOG" >>$CONFIG echo "DYNCODES=$DYNCODES" >>$CONFIG chmod 666 $CONFIG echo '#!/bin/bash' >$START echo >>$START echo "./configure \\" >>$START echo "--with-moduledir=/lib/modules/`uname -r`/misc \\" >>$START if test "$LIRC_DRIVER" = "serial"; then { if test "$SOFT_CARRIER" = "off"; then echo "--without-soft-carrier \\" >>$START; fi if test "$TRANSMITTER" = "on"; then echo "--with-transmitter \\" >>$START; fi if test "$IGOR" = "on"; then echo "--with-igor \\" >>$START; fi } elif test "$LIRC_DRIVER" = "parallel"; then { if test "$TIMER" != "0"; then echo "--with-timer=$TIMER \\" >>$START; else echo "--without-timer \\" >>$START; fi } elif test "$DRIVER_PARAM_TYPE" = "tty" -o "$DRIVER_PARAM_TYPE" = "ttyUSB" -o "$LIRC_DRIVER" = "bte"; then { echo "--with-tty=$IRTTY \\" >>$START } fi if test "$X11_WINDOWS" = "on"; then echo "--with-x \\" >>$START; else echo "--without-x \\" >>$START; fi if test "$DEBUG" = "on"; then echo "--enable-debug \\" >>$START; fi if test "$NO_DAEMONIZE" = "on"; then echo "--disable-daemonize \\" >>$START; fi if test "$NO_LONG_CODES" = "on"; then echo "--disable-long-codes \\" >>$START; fi if test "$USE_SYSLOG" = "on"; then echo "--with-syslog \\" >>$START; fi if test "$DYNCODES" = "on"; then echo "--enable-dyncodes \\" >>$START; fi echo "--with-driver=$LIRC_DRIVER \\" >>$START echo "--with-major=$LIRC_MAJOR \\" >>$START echo "--with-port=$LIRC_PORT \\" >>$START echo "--with-irq=$LIRC_IRQ \\" >>$START echo "\"\$@\"" >>$START chmod 755 $START MESSAGE="Configuration: $CONFIG, executable shell script: $START" EXIT="yes" } ############################################################################# ## Main Program if ! which dialog >/dev/null; then echo "dialog not found!" exit 1 fi if test -f $CONFIG; then { echo "Loading saved configuration from $CONFIG" case $CONFIG in */*) . $CONFIG ;; *) . ./$CONFIG ;; esac sleep 1 } fi EXIT="no" MESSAGE="Abnormal Termination" GetSelectedDriver while test "$EXIT" != "yes"; do { dialog --clear --backtitle "$BACKTITLE" \ --title "Mainmenu" \ --menu "$MAIN_MENU_TEXT" 13 74 5 \ 1 "Driver configuration ($SELECTED_DRIVER)" \ 2 "Software configuration" \ 3 "Save configuration & run configure" \ 4 "Save configuration & exit" \ 5 "Exit WITHOUT doing anything" 2>$TEMP if test "$?" != "0"; then { MESSAGE="Configuration cancelled!" EXIT="yes" } else { set `cat $TEMP` if test "$1" = "1"; then ConfigDriver elif test "$1" = "2"; then ConfigSoftware elif test "$1" = "3"; then { SaveConfig CONFIGURE="yes" } elif test "$1" = "4"; then SaveConfig elif test "$1" = "5"; then { MESSAGE="Configuration NOT saved!" EXIT=yes } fi } fi } done #clear rm -f $TEMP echo "setup.sh written by Karsten Scheibler, 1999-JUN-28" echo echo "If you have problems or questions please consult the mailing list" echo "" echo echo $MESSAGE if test "$CONFIGURE" = "yes"; then { echo "Starting the generated shell script which will call configure with the right" echo "parameters..." ./$START } fi ## EOF ######################################################################