" {bVi b#:COfox%6?GPZdnxDP\ !4=FOZckrz~'/8?FNX`hqy/:Ex#-6?mz2 ; D W b |    ' 3 yAkw!'/o0JYet-A&/8CMV`kt~  (1;GS\ht%ID  + 6 J V c p } ! !2!%%&!&,&5&>&H&R&_&i&r&|&&&&&&&&&&&&&''.'='L'V'`'k'v'''''' (((0(P((()m)))*.{/////$090t0~0000000000151U1a1l112 222213>3J3Y3[[[%[0[9[H[R[n[[^bb >[}Uvnormal, successful completionunique constraint (%s.%s) violatedsession requested to set trace eventmaximum number of sessions exceededmaximum number of session licenses exceededmaximum number of processes (%s) exceededsession attached to some other process; cannot switch sessioninvalid session id; access deniedsession references process's private memory; cannot detach session P8 O!q"#logins from more than one process not allowed in single-process modefailed to allocate %smissing or invalid session idcannot kill current sessionyour session has been killedsession is not a user sessionuser session ID does not existsession marked for killinvalid session migration passwordcurrent session has empty migration passwordcannot %s in current PL/SQL sessionLICENSE_MAX_USERS cannot be less than current number of users 2>3{4567)8M9:O/S error occurred while obtaining an enqueue. See o/s error.timeout occurred while waiting for resourcemaximum number of enqueue resources (%s) exceededmaximum number of enqueues exceededresource busy and acquire with NOWAIT specifiedmaximum number of DML locks exceededDDL lock on object '%s.%s' is already held in an incompatible modemaximum number of temporary table locks exceededDB_BLOCK_SIZE must be %s to mount this database (not %s) ;><a=>?@ALBoCmaximum number of DB_FILES exceededdeadlock detected while waiting for resourceanother instance has a different DML_LOCKS settingDML full-table lock cannot be acquired; DML_LOCKS is 0maximum number of LOG_FILES exceededobject is too large to allocate on this O/S (%s,%s)initialization of FIXED_DATE failedLOG_FILES is %s but needs to be %s to be compatibleinvalid value %s for parameter %s, must be at least %s DPEFGHIJDKaLMNOinvalid value %s for parameter %s, must be between %s and %scannot acquire lock -- table locks disabled for %scommand %s is not validprocess number must be between 1 and %sprocess "%s" is not activecommand %s takes between %s and %s argument(s)no process has been specifiedprocess "%s" not found in this instancedump %s not founddump %s is not validcannot dump variables by namevariable %s not found PJQsRSTU!V<aTdefinvalid global area specified by level %saddress range [%s, %s) is not readablememory size of %s is not in valid set of [1], [2], [4]%s%s%s%s%swarning: possibly corrupt SGA mappedglobal area must be PGA, SGA, or UGAcurrent call does not existuser call does not existUse of Oracle SQL feature not in SQL92 %s Levelno data foundinvalid specification for system parameter mts_dispatchersnetwork protocol %s cannot be used by dispatchersg2hkijk)lUoinvalid network protocol; reserved for use by dispatchersdeadlock detected; all public servers blocked waiting for resourcesdispatching mechanism not configured for network protocol %scannot startup/shutdown database when connected to a dispatcherfailed to connect to ORACLE listener processfailed to set up dispatcher to accept connection asynchronouslymaximum number of servers is only %s; adding %s servers p>qsrstuvCwzxonly created up to %s (maximum specified) dispatchersprotocol name %s is too longmissing value for system parameter mts_serviceconnection refused; dispatcher connection table is fullmts_service name is too longvalue out of range for system parameter mts_serversvalue out of range for system parameter mts_dispatchersinvalid specification for system parameter mts_listener_addressdispatching mechanism not enabled or installed yJzw{|Kjmts_servers specified without mts_dispatcherscannot initialize network configurationidle public server terminatingmts_dispatchers specified without mts_max_serversduplicate transaction IDinvalid transaction IDcurrent session does not match requested sessioncannot create control file '%s'control file version %s incompatible with ORACLE version %scontrol file: '%s'using the wrong control files >x3Zwerror in reading control file '%s' (block %s, # blocks %s)error in identifying control file '%s'error in writing control file '%s' (block %s, # blocks %s)control files are not for the same databasenumber of control file names exceeds limit of %sblock size %s exceeds limit of %s bytescannot open control file '%s'control file '%s' does not match previous control filesblock size %s below minimum required size of %s bytes8uScannot reuse control file '%s'; old file size %s, %s requiredcontrol file '%s' version %s inconsistent with file '%s' version %smust be at least one control fileunable to determine physical block size for control file '%s'control file '%s' physical block size %s inconsistent with %scontrol file '%s' was created with block size %s now is %srequired control file size %s larger than maximum %scontrol file '%s' not mounted by first instance Db.BNzerror on write to control filecontrol file may not be queried using dispatcherconversion data file is invalid or incorrect versionthe specified file is not a control fileexpected size %s of controlfile '%s' differs from actual size %sarchiver not startedunused errorlog %s of thread %s is empty, cannot archivelimit of %s exceeded by length %s of archive string '%s' error in archive control string '%s'8j Euerror archiving log %s of thread %s, sequence # %serror occurred in translating archive text string '%s'archiver error. Connect internal only, until freed.manual archiving in NOARCHIVELOG mode must identify loglog %s of open thread %s is the current log, cannot archivecannot find online log sequence %s for thread %slog %s of thread %s is being archived or modifiedcurrent log %s of closed thread %s cannot switch J}      0]wthere are no logs that need archiving for thread %sno recovery requiredInstance recovery required, cannot set ARCHIVELOG modename of archived log file neededname of archived log file not neededSpecified logfile does not exist '%s'Specified logfile is part of thread %s not %serror creating archive logthere are no logs that need archivingerror writing archive logmedia recovery of direct load data that was not logged D^AkIllegal recovery option %smedia recovery has already been startedCHANGE keyword specified but no change number givenIllegal option to the UNTIL recovery flag %sLogfile '%s' no longer needed for this recoveryChange %s generated at %s needed for thread %sChange %s for thread %s is in sequence #%smedia recovery may not be preformed using dispatcherUPI %s call not supported, use ALTER DATABASE RECOVERRecovery session canceled due to errors Df !)"8#q$%Recovery session still in progressTIME not given as a string constantNo members available, or no member contains valid dataSpecified change number %s not found in thread %sTo continue recovery type ALTER DATABASE RECOVER CONTINUESuggestion : %sOperating system archival error occurred. See error belownumeric value required for PARALLEL optionparallel recovery feature not installedcontrol file out of sync with redolog ,D-.012/3U456illegal redo log block size %s specified - exceeds limit of %serror in adding log file '%s' - file cannot be createdlimit of %s logs exceededrequested instance_number is busylog %s of thread %s inconsistent; belongs to another databaselimit of %s instances in this databaserequested instance_number out of range, maximum is %scannot open archived log '%s'log belongs to wrong databasearchived log contains sequence %s; sequence %s required 7>8b9:;<=T>z?cannot read header from archived logonline log %s thread %s: '%s'open failed for members of log group %s of thread %slog %s of thread %s, expected sequence# %s doesn't match %slog %s of thread %s, wrong thread # %s in headerlog %s of thread %s, type %s in header is not log filefile type %s in header is not log filelog %s of thread %s, expected file size %s doesn't match %slog %s of thread %s has incorrect log reset status@8AhBCDEMFGcannot read file header from log %s of thread %slog %s of thread %s, cannot update log file headerlog %s of thread %s is not current copyCurrent log of thread %s not useable and all others need archivinglogfile '%s' translated name '%s' too long, %s characters exceeds %s limitarchived log for thread %s, wrong thread # %s in headerlog begins at change %s, need earlier change %slog %s of thread %s, physical size %s less than needed %s H>IrJKLM:N_OqParchived log ends at change %s, need later change %sarchived log begins at change %s, need change %sarchived log ends at change %s, need change %slog version %s incompatible with ORACLE version %sarchived log is too small - may be incompletely archivedredo log read error block %s count %sarchived log: '%s'online log %s: No log with this number, log does not existlog file size %s blocks is less than minimum %s blocks QDRvSTUV+WYX{YZlog file '%s' does not exist and no size specifiedlog %s of thread %s is more recent than control filearchived log does not contain any redoIO error processing online log %s of thread %slog %s of thread %s, wrong log # %s in headerarchived log was created before last RESETLOGStoo many errors, log member closedunable to recreate online log '%s'redo log write error block %s count %slog member marked as STALE [D\]^_`aNb|cdlog %s of thread %s, expected block size %s doesn't match %ssingle-process redo failure. Must abort instancefailure obtaining block size for '%s'log %s of thread %s needs to be archivedrecover-to time invalidall logs for thread %s need to be archived - cannot enablelog corruption near block %s change %s time %scorrupt redo log block headerchange numbers out of orderinconsistent lengths in change description eDf~ghijkJlimntoo many members specified for log file, the maximum is %sToo many file members specified, the maximum is %sLogfile group %s does not existnot a logfile member: %scannot remove last log member %s for group %smember is required to form a valid logfile in group %slog is not the archived versioncan not write header to new log memberthe specified log is not the correct next loglog %s of thread %s, checksum error in the file header oDpeqrstu9vrwxchecksum error in log file headerchecksum error in redo log blockCurrent log of thread %s not useable and other log being clearedpotential deadlock during kcbchange operationno free buffer handles availablefile %s cannot be modified at this timeonline log version %s incompatible with ORACLE version %sparameter db_block_size = %s invalid, valid range [%s..%s]unable to get default db_block_sizefile %s cannot be read at this time8w+Tlog %s of thread %s is being cleared, cannot become current logAll threads must switch to new log format at the same timelog %s of thread %s is being cleared, operation not allowedlog %s of thread %s is needed for recovery of offline datafilesinvalid release value %s for parameter %sthe value for parameter %s is not supported by this releasedatabase changes by release %s cannot be used by release %s%s (%s) is not the same as other instances (%s) >by8|Conversion data file not found: '%s'compatibility type "%s"COMPATIBLE parameter needs to be %s or greaterrolling upgrade from release %s.%s to %s.%s is not allowedparameter %s is set to TRUEORACLE is not licensed. Contact Oracle Corp. for assistanceORACLE feature is not licensed. Contact Oracle Corp. for assistancebackground process "%s" did not startbackground process "%s" failed while starting J1Subackground process "%s" did not start after %s secondsbackground process started when not expectedfatal error in background processnormal completion of background processbackground process '%s' unexpectedly terminated with error %sLGWR process terminated with errorDBWR process terminated with errorPMON process terminated with errorARCH process terminated with errorSMON process terminated with errorTRWR process terminated with error Pr8>?1@^AzBCDRECO process terminated with errorSNP* process terminated with errorLCK* process terminated with errorDuring shutdown a process abnormally terminatedMaximum number of interrupt handlers exceededosndnt: $CANCEL failure (break)osndnt: $QIO failure (send out-of-band break)in-band break protocol errorout-of-band break protocol errorreset protocol errorosndnt: server received malformed connection requestprotocol versions do not match EPFtGHIJKL M?NjOPosndnt: cannot allocate context areaosndnt: cannot deallocate context areaosndnt: $TRNLOG failurecannot close connectionhost name has incorrect formosndnt: LIB$ASN_WTH_MBX failurecannot connect to remote hostmessage from host was too shortmessage from host had incorrect data lengthmessage from host had incorrect message typeincorrect number of bytes writtenosndnt: $QIO failure (mailbox queue) QJRrSTUVXYcZx[\osndnt: $DASSGN failure (network device)osndnt: $DASSGN failure (mailbox)osndnt: $QIO failure (receive)osndnt: $QIO failure (send)osndnt: $QIO failure (mailbox requeue)osndnt: $QIO failure (mailbox read)internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]cleanup lock conflictinternal programming exceptionORACLE server session terminated by fatal errorerror occurred at recursive SQL level %s^\o0,LawInternal error codeobject necessary for warmstarting database cannot be alteredbootstrap verison '%s' inconsistent with version '%s'maximum number of row cache instance locks exceededbootstrap process failureerror message translation failedinvalid SQL statementinvalid CREATE commandinvalid datatypeinvalid table nameinvalid column namemissing keywordmissing left parenthesismissing right parenthesish|,9Sc~missing NULL keywordinvalid number of argumentsspecified length too long for its datatypeinvalid charactertoo many valuesmissing ADD keywordnetwork access of dictionary table not currently allowedmissing commacolumn ambiguously definedinvalid functioninvalid relational operatorunexpected end of SQL commandmissing or invalid optionFROM keyword not found where expectedmissing BY keywordmissing INTO keywordh~ ,Oamissing VALUES keywordmissing equal signmissing SELECT keywordmissing periodmissing asteriskmissing identifierinconsistent datatypesSQL command not properly endedgroup function is not allowed heregroup function is nested too deeplymissing expressionnot a single-group group functionnot enough arguments for functiontoo many arguments for functioninvalid ALTER commandmissing cluster name\x-Qdutable or view does not existcluster does not existinsufficient number of clustered columnsspecified clustered column does not existmissing TO keywordnot enough valuesALTER CLUSTER statement no longer supportedillegal reference to remote databaseinvalid DROP optioncluster not emptymissing GROUP keywordinvalid index namemissing IDENTIFIED keywordname is already used by an existing objectb5Wlmissing or invalid auditing optionduplicate column namemissing CHECK keywordtablespace '%s' does not existambiguous column naming in select listtoo many group-by / order-by expressionstable name not in FROM listcolumn aliases not allowed for '*'missing TABLE keywordmissing WHERE keywordmissing INDEX keywordmissing ON keywordmissing WITH keywordmissing SET keywordidentifier is too long\v/Uinvalid row count estimateinvalid PCTFREE value (percentage)date + date not allowedLEVEL, PRIOR, or ROWNUM not allowed hereduplicate auditing optionnested group function without GROUP BYnot a GROUP BY expressionsynonym translation is no longer validcannot mix table and system auditing optionsmissing plus signcolumn not allowed hereinvalid program namemissing or invalid group name(s)missing or invalid username(s) Vt2W|missing or invalid password(s)too many passwords for usernames givenmissing or invalid privilegeonly MAC privileges may be granted to proceduresinvalid format for REVOKE commandmissing GRANT keywordmissing OPTION keywordmissing or invalid synonym identifierthe concatenate operator is ||, not |illegal use of LONG datatypemust name this expression with a column aliasinvalid view namemaximum open cursors exceeded\j5Peinvalid cursorfetch out of sequenceno statement parseddefault username feature not supported; logon deniednull password given; logon deniedbind variable does not existvariable not in select listnot all variables boundmissing mandatory parameterinvalid OCI operationCannot use v7 compatibility mode when talking to v6 servernot logged onuser requested cancel of current operationORACLE shutdown in progress Jb8nlogon called recursivelyThis function can be called only after a fetchinvalid username/password; logon deniedcolumn does not have a LONG datatypeunable to allocate memory in the user sideunknown context stateinvalid context size specifieddatabase operation not supported in this configurationCursor context not found (Invalid cursor number)invalid datatype in OCI callUPI parameter out of range P% 3 ` t  multiple buffers of size > 2000 in the bind listbind variables not allowed for data definition operationsinternal two task errorinternal two task errorSELECT ... INTO variable does not existinsufficient privilegesno such useridORACLE initialization or shutdown in progressORACLE not availableORACLE only available to users with RESTRICTED SESSION privilegeillegal variable name/numbermaximum cursor memory exceeded8t8jcannot write database file version %s with ORACLE version %sinsufficient privileges on underlying objects of the viewinvalid character in password; logon deniedinternal error. hostdef extension doesn't existdetaching a session with open cursors not alloweduser side memory corruption [%s], [%s], [%s], [%s]size %s of buffer bound to variable %s exceeds maximum %suser %s lacks CREATE SESSION privilege; logon denied >i:\!cannot acquire space to extend context areaThe above error occurred in schema=%s, package=%s, procedure=%sCouldn't find the specified procedure in the given contextBind by name is not spupportted in streamed RPCcannot acquire space to open context areadeferred rpc buffer format invaliduser storage address cannot be readuser storage address cannot be writteninvalid or ambiguous block.field reference in user exit "D#d$./0142b34internal New Upi interface errorparse expected before a bind or executearray binds or executes not allowedUsing an old version of Oracle for the servercannot perform operation without starting up ORACLEcannot stop ORACLE; ORACLE not runningfatal connection error: unrecognized call typecannot shut down ORACLE; inside a login session - log off firstyou are currently logged onmultiple logons per process not yet supported 5>6g789:;_<=background process initialization failurefailure in processing system parametersORACLE database was not properly created, operation abortederror in shutting down ORACLEcannot start already-running ORACLE - shut it down first'row_locking = always' requires the transaction processing optionvalue of parameter "%s" is inconsistent with that of other serversinvalid argument in OCI callpreceding errors in deferred rpc to "%s.%s.%s" >>?^@ABC,DHExFsavepoint '%s' never establishedcannot start up ORACLE - currently logged oncannot shut down ORACLE while active processes existimmediate shutdown in progress - no operations are permittedshutdown in progress - connection is not permittedfailure during startup forceORACLE instance terminated. Disconnection forcedALTER DATABASE CLOSE only permitted with no sessions connectedALTER DATABASE CLOSE in progress. Connections not permitted G>H_IJKLDM\NODML statement processed zero rowsprogram version (%s) incompatible with instance (%s)cannot shutdown while in a transaction - commit or rollback firstprogram Interface error during Long Insertcannot mount database in SHARED mode if started in single process modedatabase already mounteddatabase being created currently mounted by some other instancecannot mount database in EXCLUSIVE modedatabase name '%s' in control file is not '%s' PJQxRSTUV.W@XyYZnumber of control files (%s) does not equal %smount is incompatible with mounts by other instancesdatabase must be closed before dismountingdatabase must be mounted for media recoveryfile %s is in media recoverydatabase not opendata file %s: '%s'name for data file %s is unknown - rename to correct filemedia recovery not startedfile %s needs media recoveryIO error writing block to file %s (block # %s) [>\n]^_`%aJbcIO error reading block from file %s (block # %s)error in opening database file %sadding file '%s' with illegal block size: %s; limit is %scannot add any more database files: limit of %s exceedederror in creating database file '%s'cannot remove online database file %scannot rename database file %s - file is in use or recoverydatabase file %s failed verification checkcannot start online backup; media recovery not enabledd8epfgh%iTjkcannot recover data file %s - file is in use or recoverycannot disable media recovery - file %s has online backup setdatabase must be mounted EXCLUSIVE and not open for this operationdatabase name '%s' exceeds size limit of %s characterscannot start online backup - file %s is offlineuser's default or temporary tablespace does not existdatabase file version %s incompatible with ORACLE version %sDB_FILES system parameter value %s exceeds limit of %sl2mrnopqQrlength of database file name '%s' exceeds limit of %s characterslength of log file name '%s' exceeds limit of %s charactersdatabase mounted exclusive by another instancefile %s accessed for DML/query is offlinespecified size of file %s (%s blocks) is less than original size of %s blocksdata file %s is still in the middle of going offlinedatabase must either be open in this instance or not at alls8tyuvwxTyzRESETLOGS option only valid after an incomplete database recoverycannot end online backup - all files are offlineerror renaming data file %s - new file '%s' not foundcannot end online backup - none of the files are in backupcannot disable media recovery - file %s needs media recoveryFile size (%s blocks) exceeds maximum of %s blocksoffline immediate disallowed unless media recovery enabledcannot start online backup - file %s is already in backup{8|\}~2jSYSTEM tablespace file %s is offlinedatabase must be mounted EXCLUSIVE for this operationcannot shutdown - file %s has online backup setcannot prevent writes - file %s has online backup setuse media recovery to recover block, restore backup if neededfile %s was not restored from a sufficiently old backup an incompatible media recovery is activedatabase busy. Open, close, mount, and dismount not allowed now >y2Bthe database is being opened, closed, mounted or dismountedrecovery in progress may need access to filescannot identify data file %s - file not founddatabase %s already mountedfile is not from same database as previous files - wrong database idfile is not a %sdatabase name %s in file header does not match given name of %sblock size %s in file header does not match DB_BLOCK_SIZE (%s)SIZE clause indicates %s (blocks), but should match header %s >[yBUMAXLOGFILES may not exceed %sMAXDATAFILES may not exceed %sfile number %s is larger than %s (%s)two files are the same file/group number or the same filephysical block size %s does not match size %s of other membersDATAFILE number 1 not found. Must be presentfile not found '%s'datafile %s going offline due to error advancing checkpointrecovery of thread %s stuck at block %s of file %s8z3qdata dictionary indicates missing data file from system tablespaceDB_FILES is %s buts needs to be %s to be compatibledata dictionary has more than the %s files allowed by the instancedata dictionary has more than the %s files allowed by the controlfiedata file does not match dictionary - probably old incarnationfile %s created before last CREATE CONTROLFILE, cannot recreatefile %s does not existcan not create datafile 1 >t5rfile %s created before last RESETLOGS, cannot recreatecannot create database file %s - file is in use or recoverycannot mount database in SHARED modelogfile group %s already existslogfile group number %s is invalidfile %s failed verification testscannot read from file %s because it failed verification testsBlock size %s in header does not match physical block size %sfile is from a different RESETLOGS than previous files >|:wcontrol file or data file %s is from before the last RESETLOGSfile %s is already offline - cannot do a normal offlinemust have at least one enabled threadfile %s is not the same file seen at start of recoveryfile %s needs more recovery to be consistentonline backup of file %s needs more recovery to be consistentfile %s is inconsistent due to a failed media recovery sessionthread %s only contains one logmust specify size for log file if RESETLOGS8\ @mfile %s is not in online backup modeactual file size of %s is smaller than correct size of %s blocksfile size %s in header does not match size %s in control filewrong incarnation of this file - wrong creation timewrong incarnation of this file - wrong creation SCNfile number is %s rather than %s - wrong filenot a data file - type number in header is %sfile is not part of this database - wrong database id >v4Sqfile is more recent than control file - old control filedata file is an old version - not accessing current versiondata file is from before the last RESETLOGSdata file header is media corruptversion 6 data file is not from conversion to version 7MAXLOGMEMBERS may not exceed %sMAXINSTANCES may not exceed %sMAXLOGHISTORY may not exceed %senabled thread %s is missing after CREATE CONTROLFILE8uE~thread %s is expected to be disabled after CREATE CONTROLFILElogfile member belongs to a different logfile grouplogfile member is not from the same point-in-timedatabase not open: queries allowed on fixed tables/views onlyfile based sort illegal before database is opendata file %s is not the same file to a background processMAXINSTANCES of %s requires MAXLOGFILES be at least %s, not %sRESETLOGS must be specified to set a new database name >o6\group number in header %s does not match GROUP %sthread number %s is greater than MAXINSTANCES %sfile header of log member is inconsistent with other memberslog %s is inconsistent with other logsSET DATABASE option required to install seed databasedata file %s is inconsistent with logscannot make read only - file %s is offlinecannot make read write - file %s is offlinecannot start online backup - file %s is read only >|U~file %s is read only - cannot recover using backup controlfilecannot end backup of file %s - file is in use or recoveryEND BACKUP failed for %s file(s) and succeeded for %scannot extend datafile %scannot shrink datafile %sdatabase must be in ARCHIVELOG mode to use external cachetoo many data files to add in one commandan external cache has dieddata file suffered media failure: database in NOARCHIVELOG mode Dqxyz;{h|u}~system tablespace file suffered media failureunnamed datafile(s) added to controlfile by media recoveryoffline file %s will be lost if RESETLOGS is donemandatory (NOT NULL) column is missing or NULL during insertinserted value too large for columnview WITH CHECK OPTION where-clause violationno data foundALTER COLUMN will make an index too largefetched column value is NULLfetched column value was truncated Du;hcannot update mandatory (NOT NULL) column to NULLsuch column list already indexedNOSORT option may not be used; rows are not in ascending orderinvalid ROWIDcannot store the length of column in the indicatorzero length not allowed for this datatypeillegal value in packed decimal number bufferinvalid array length when trying to bind arraytwo tables cannot be outer-joined to each othera table may be outer joined to at most one other table Db}6qspecified index does not existdatdts: illegal format codedatstd: illegal format codedatrnd/dattrn: illegal precision specifierexact fetch returns more than requested number of rowserror encountered while checking for extra rows in exact fetchmissing or illegal character following the escape characterescape character must be character string of length 1numeric overflowsingle-row subquery returns more than one row Jg 7Jfargument '%s' is out of rangecolumn being added already exists in tableinternal inconsistency in GRANT commandpublic synonym to be dropped does not existsynonym to be created is already definedprivate synonym to be dropped does not existuser does not existCONNECT BY loop in user datacannot have join with CONNECT BYvalue larger than specified precision allows for this columncolumn to be modified must be empty to change datatype2t'ncolumn to be modified must be empty to decrease precision or scalecolumn to be modified must be empty to decrease column lengthcolumn to be modified to NOT NULL is already NOT NULLinternal inconsistency; illegal datatype in resultant view columninternal inconsistency; internal datatype maps to invalid external typecannot select ROWID from a join view without a key-preserved tablecannot select ROWID from view with DISTINCT, GROUP BY, etc. >o1aALTER TABLE does not operate on clustered columnsindex must be dropped before changing to desired typecolumn contains NULL values; cannot alter to NOT NULLmaximum key length (%s) exceededcolumn to be modified to NULL cannot be modified to NULLcannot CREATE UNIQUE INDEX; duplicate keys foundSET TRANSACTION must be first statement of transactioncannot convert column into numeric datatypeconverting column overflows integer datatype8 >vmay not perform insert/delete/update operation inside a READ ONLY transactionconverting column overflows decimal datatypeinvalid length inside variable character stringinvalid length for variable character stringunimplemented or unreasonable conversion requestedcan bind a LONG value only for insert into a LONG columncannot insert string literals longer than 2000 characterscannot modify column datatype with current constraint(s) D 5ecircular grant (granting to grant ancestor) of table or viewinvalid hex numberunable to read data - table definition has changedsort key too longa predicate may reference only one outer-joined tablePRIOR can only be followed by a column namecannot create a synonym with same name as objectcannot use CONNECT BY on view with DISTINCT, GROUP BY, etc.cannot have subqueries in CONNECT BY clausecannot have START WITH or PRIOR without CONNECT BY J~8Slmust reparse cursor to change bind variable datatypedivisor is equal to zerouser data area descriptor is too largearray bind may not include any LONG columnslast character in the buffer is not Nulltrailing null missing from STR bind valueinvalid number format modelunsupported character setinvalid length for DATE or NUMBER bind variablearrays can only be bound to PL/SQL statementscompile bind length different from execute bind length Pr&;Xnsize of array element is too largepacked decimal number too large for supplied bufferinvalid nibble or byte in the input dataresult of string concatenation is too longinvalid ANALYZE commandCASCADE option not validLIST option not validinvalid SAMPLE size specifiedinvalid SIZE specifiedspecified chain row table not foundspecified chain row table form incorrectillegal option for ANALYZE CLUSTER PtPiblock check failure - see trace filetable/index cross reference failure - see trace filefailure in getting date/timeCREATE DATABASE failedindex '%s.%s' is in direct load stateCREATE CONTROLFILE faileddatabase name '%s' does not match parameter db_name '%s'error in adding log filesmissing or illegal database namedatabase not mountedcannot create database; error in file '%s' at line %sspecified name '%s' does not match actual '%s' Je7Ueerror in deleting log fileserror in renaming log/data fileserror renaming log file %s - new file %s not foundinvalid current time returned by operating systemerror in log specification: no such logerror dropping log group %s: no such lognonexistent log/data file '%s'log member: '%s'CREATE DATABASE must specify more than one log fileerror while processing file '%s' near line %snumber of data files to add (%s) exceeds limit of %s Jd$>Vxerror in adding data filesfile '%s' to be renamed does not existcannot rename data file to '%s' - file already part of databasecannot create data file as '%s' - file already part of databaseerror in renaming data fileserror in opening file '%s'error while reading fileEOF while processing SQL statementerror closing file '%s'a database already mounted by the instancea database already open by the instance >v Ycannot create database; instance being started elsewherecannot rename file '%s'; file does not belong to tablespacerollback segment '%s' doesn't existrollback segment '%s' already existsspace quota exceeded for tablespace '%s'cannot add data file '%s' - file already part of databasefailed to acquire any rollback segmenttablespace '%s' is not onlinetablespace '%s' is not offline >  & V system tablespace cannot be brought offline; shut down if necessarytablespace '%s' is offline, cannot allocate space in ittablespace '%s' already existscannot drop system rollback segmentrollback segment '%s' specified not availabletablespace contains active rollback segment '%s'active rollback segment '%s' found, terminate dropping tablespacetablespace not empty, use INCLUDING CONTENTS optioncannot drop system tablespace8ibextended rollback segment, pinned blocks releasedcannot use system rollback segment for non-system tablespace '%s'MAXEXTENTS must be no smaller than the %s extents currently allocatedout of transaction slots in transaction tablessnapshot too old: rollback segment number %s with name "%s" too smallMINEXTENTS for rollback segment must be greater than 1rollback segment extents must be at least %s blocksout of transaction ID's in rollback segment %s >tB`~MAXEXTENTS for rollback segment must be greater than 1global hash table size mismatch for %s (%s != %s)failed to remove all objects in the tablespace specifiedfailed to extend rollback segment number %srollback segment is PUBLIC, need to use the keyword PUBLICrollback segment is not PUBLICerror in identifying file '%s'file specified more than once in DROP LOGFILEdropping log %s would leave less than 2 log files in thread %s 8!X"#$%V&'cannot set space quota on PUBLICdata file too small for system dictionary tablesMINEXTENTS must be no larger than the %s extents currently allocatedredo version %s incompatible with ORACLE version %sglobal hash table size %s for rollback segments is too small for rollback segment ID %sshutting down instance, no further change allowedmaximum number of concurrent transactions exceededtimeout waiting for space management resource(8)*+,-4./instance locking protocol version %s incompatible with ORACLE version %scannot add log file '%s' - file already part of databaseORACLE data block corrupted (file # %s, block # %s)write error occurred during recoveryerror creating control backup file %sattempt to use rollback segment (%s) new extent (%s) which is being allocatedunable to open control file for backupunable to get block size of control file to be backed up 0>1u23456Q78unable to get file size of control file to be backed uperror identifying backup file %sunable to open destination file %s for backuperror during control file backup file copymust use RESETLOGS option for database openmust use RESETLOGS or NORESETLOGS option for database opennumber of segment free list (%s) exceeds maximum of %slock held by in-doubt distributed transaction %serror converting Version 6 rollback segment (%s) to Oracle7 format92:;< =0>f?rollback segment optimal size (%s blks) is smaller than the computed initial size (%s blks)attempt to wrap into rollback segment (%s) extent (%s) which is being freederror freeing extent (%s) of rollback segment (%s))cannot specify system in %s parametercannot alter system rollback segment online or offlinerollback segment '%s' is not onlinefailed to acquire rollback segment (%s), cache space is full (currently has (%s) entries)@2AfBCDEOFat most one "%s" in clause "%s" of gc_files_to_locksillegal bucket size in clause "%s" of gc_files_to_locksmore locks in gc_files_to_locks than reserved in gc_db_locksillegal grouping size in clause "%s" of gc_files_to_locksillegal file number range in clause "%s" of gc_files_to_locksmissing file numbers in clause "%s" of gc_files_to_locksgc_files_to_locks not identical to that of another mounted instanceG8HqIJK$L[MwNgc_lck_procs (%s) is not the same as other instances (%s)cannot bring rollback segment '%s' online, its status is (%s)log %s is the current log for thread %s - cannot drop membersrecovery using the BACKUP CONTROLFILE option must be donethread number %s is invalid - must be between 1 and %sthread %s is already enabledthread %s only has %s logs - at least 2 logs required to enablethread %s is busy - cannot enable ODPiQRSTU3VjWXthread %s is mounted - cannot disablethread %s is open - cannot disablecannot mount: %s is not a valid thread numberthread %s is not enabled - cannot mountthread %s is mounted by another instanceno public threads are available for mountingcannot rename member of current log if database is openthread number must be specified - default not specificlog %s is current log for thread %s - cannot droplog %s needed for crash recovery of thread %sY8Zn[\]^>_y`rollback segment '%s' does not belong to this instancerollback segment number '%s' cannot handle more transactionsrollback segment number '%s' is not onlinemax # extents (%s) reached for rollback segment %smax # extents (%s) reached saving undo for tablespace %smax # extents (%s) reached in temp segment in tablespace %smax # extents (%s) reached in table %s.%smax # extents (%s) reached in index %s.%sa8bhcdef+gjhparallel Server Option needed for this operationrollback segment number '%s' is about to go offlinerollback segment #%s specified not availablerollback segment '%s' is already onlinerollback segment '%s' is being used by another instance (#%s)parameter %s does not allow ORACLE version %s to mount paralleldatabase cannot be mounted parallel with no lock processescannot make tablespace read only with active transactions i>jrklmn*ocpqtablespace '%s' is not online - cannot add data filebegin backup not needed for read only tablespace '%s'system tablespace can not be made read onlytablespace '%s' is already read onlyprevious attempt to make read write is half completetablespace '%s' is not read only - cannot make read writetablespace '%s' is read only, cannot allocate space in itlog %s is the current log of disabled thread %soperation not allowed with a backup control filer8sstuvwGx|yunable to extend rollback segment %s by %s in tablespace %sunable to extend save undo segment by %s for tablespace %sunable to extend temp segment by %s in tablespace %sunable to extend table %s.%s by %s in tablespace %sunable to extend index %s.%s by %s in tablespace %sunable to extend cluster %s.%s by %s in tablespace %smax # extents (%s) reached in cluster %s.%sinvalid SHRINK option value z>{z|}~3iunable to create INITIAL extent for segment in tablespace %sunable to allocate MINEXTENTS beyond %s in tablespace %stablespace '%s' is already permanenttablespace '%s' is already temporarytablespace '%s' is non-empty and cannot be made temporarythe contents of tablespace '%s' is constantly changingTransaction which has expanded the Sort Segment has abortedcontrolfile is not a standby controlfilecontrolfile is for a standby database8f>qredo log is incompatible with standby databasestandby database requires DROP option for offline of data filestandby database control file not consistentnew datafile %s needed for standby database recoverycontrolfile is a backup, cannot make a standby controlfilecontrolfile may be missing files or have extra onesdata file %s has not been identifieddata file %s is an old incarnation rather than current file D9pstandby file name convert of '%s' exceeds maximum length of %sstandby file name convert parameters differ from other instanceparameter %s must be two strings, a pattern and a replacementdatabase must be mounted EXCLUSIVE and not open to activategc_db_locks cannot be zero if gc_files_to_locks is usedduplicate username in lista cluster is not appropriate herea view is not appropriate heremissing SYNONYM keywordstring literal too long P!San outer join cannot be specified on a correlation columnuser function result value was too largemissing LIST keywordACCESS or SESSION expectedprogram does not existmissing OF keywordduplicate privilege listedyou cannot grant a privilege which you do not haveGRANT OPTION does not exist for that privilegeerror in execution of user functionUNIQUE may not be used with a cluster indexNOSORT may not be used with a cluster index Dl9Gjseccta: invalid access mode token passedBY ACCESS | SESSION clause not allowed for NOAUDITouter join operator (+) not allowed in operand of OR or INgrant option does not exist for '%s.%s'USERENV(COMMITSCN) invoked more than once in a transactioninvalid numberzero-length columns are not allowedfloating point precision is out of range (1 to 126)USERENV('COMMITSCN') not allowed herea table is not appropriate here DyFenumeric precision specifier is out of range (1 to 38)numeric scale specifier is out of range (-84 to 127)database link name expectedinvalid number of column names specifiedcircular view definition encountereddata manipulation operation not legal on this viewvirtual column not allowed hereillegal parameters - EXTENT MIN higher than EXTENT MAXinvalid ALTER TABLE option[NOT] SUCCESSFUL expected JASrvalid modes: [ROW] SHARE, [[SHARE] ROW] EXCLUSIVE, SHARE UPDATEmissing IN keywordmissing MODE keywordmissing double quote in identifierillegal zero-length identifiercomment not terminated properlyinternal inconsistency; illegal user function indexinappropriate INTOinvalid host/bind variable nameindicator variable not permitted hereinvalid user.table.column, table.column, or column specification >c7vonly simple column names allowed hereyou may not GRANT/REVOKE privileges to/from yourselfUPDATE/REFERENCES may only be REVOKEd from the whole table, not by columnInvalid dump undo optioncannot delete from view without exactly one key-preserved tablecolumn definition incompatible with clustered column definitiona table may contain only one column of type LONGMust specify an extent number or block numberquoted string not properly terminated Da4`Must specify an object numbertable must be empty to add mandatory (NOT NULL) columnuser function is incorrectly definedillegal argument for functionDML operation does not map to a unique table in the joinvopdrv: view query block not in FROMupdate or delete involves outer joined tablenew update value of join is not guaranteed to be uniquespecifying table's owner name is not alloweddictionary table not allowed in this context Dp#XUPDATE ... SET expression must be a subquerynumber string too longduplicate CLUSTER option specificationsCLUSTER option not allowed in CREATE CLUSTER commandillegal option for a clustered tableMust specify a value for LEVELmay not specify column datatypes in this CREATE TABLEDump undo option specified more than oncelooping chain of synonymscannot modify more than one base table through a join view8dUWITH GRANT OPTION not allowed in this systemmaximum subquery nesting level exceededcannot modify a column which maps to a non key-preserved tablestring literal requiredUNRECOVERABLE cannot be specified without AS SELECTUNRECOVERABLE cannot be specified for a cluster or clustered tableonly one RECOVERABLE or UNRECOVERABLE clause may be specifiedRECOVERABLE cannot be specified with database media recovery disabled >z3qORDER BY item must be the number of a SELECT-list expressionFOR UPDATE of this query expression is not allowedonly one clause allowed per query blockCONNECT BY clause required in this query blockquery block has incorrect number of result columnsexpression must have same datatype as corresponding expressionnot a SELECTed expressionmaximum number of columns in a table or view is 254maximum number of index columns is 16 Jq 9 n  maximum number of cluster columns is 16maximum number of expressions in a list is 254this operator cannot be used with liststhis operator must be followed by ANY or ALLmissing EXCEPTION keyworda column may not be outer-joined to a subquerya literal in the date format was too large to processdate format is too long for internal bufferJulian date is out of rangefailure in getting date/timeformat code appears twice Jr@jJulian date precludes use of day of yearyear may only be specified oncehour may only be specified onceAM/PM conflicts with use of A.M./P.M.BC/AD conflicts with use of B.C./A.D.month may only be specified onceday of week may only be specified once'HH24' precludes use of meridian indicatorsigned year precludes use of BC/ADformat code cannot appear in date input formatdate format not recognized &D'()*+,4-V./date format picture ends before converting entire input stringyear conflicts with Julian dateday of year conflicts with Julian datemonth conflicts with Julian dateday of month conflicts with Julian dateday of week conflicts with Julian datehour conflicts with seconds in dayminutes of hour conflicts with seconds in dayseconds of minute conflicts with seconds in daydate not valid for month specified 0J1u23456758i9:input value not long enough for date format(full) year must be between -4713 and +4713quarter must be between 1 and 4not a valid monthweek of year must be between 1 and 52week of month must be between 1 and 5not a valid day of the weekday of month must be between 1 and last day of monthday of year must be between 1 and 365 (366 for leap year)hour must be between 1 and 12hour must be between 0 and 23 ;J<j=>?@AB(CfDEminutes must be between 0 and 59seconds must be between 0 and 59seconds in day must be between 0 and 86399julian date must be between 1 and 5373484AM/A.M. or PM/P.M. requiredBC/B.C. or AD/A.D. requirednot a valid time zonea non-numeric character was found where a numeric was expecteda non-alphabetic character was found where an alphabetic was expectedweek of year must be between 1 and 53literal does not match format stringFhjklmnop(qArYsptuvwxwrong number of digits for this format itemtoo many precision specifiersbad precision specifierLOGFILE keyword expectedROLLBACK keyword expectedSEGMENT keyword expectedEVENTS keyword expectedDATAFILE keyword expectedSTORAGE keyword expectedBACKUP keyword expectedTABLESPACE keyword expectedEXISTS keyword expectedREUSE keyword expectedTABLES keyword expectedCONTENTS keyword expectedROW keyword expected yJzd{|}~ $<sEXCLUSIVE keyword expectedinvalid auditing option for sequence numbersinvalid auditing option for viewskeyword ONLINE, OFFLINE, RESIZE, AUTOEXTEND or END expecteduser or role '%s' does not existuser '%s' does not existrole '%s' does not existuser name '%s' conflicts with another user or role namerole name '%s' conflicts with another user or role nameCASCADE must be specified to drop '%s'CASCADE aborted, objects locked by another user Jq(Agrole '%s' not granted or does not existmaximum of %s enabled roles exceededcannot GRANT to a role WITH GRANT OPTIONcannot REVOKE privileges you did not grantGRANT option not granted for all privilegesno privileges to GRANTcannot grant %s to a roleADMIN option not granted for role '%s'cannot create a stored object using privileges from a rolecircular role grant detectedmissing user or role name J{3hcannot specify owner when creating users or rolesmissing or invalid role nameIDENTIFIED BY must be specified for CREATE USERonly the ADMIN OPTION can be specifiedcannot drop a user that is currently connectedSEQUENCE keyword expectedIDENTIFIED BY and EXTERNALLY cannot both be specifiedIDENTIFIED BY already specifiedIDENTIFIED EXTERNALLY already specifiedDEFAULT ROLE[S] already specifiedDEFAULT TABLESPACE already specified Jp;`TEMPORARY TABLESPACE already specifiedROLE keyword expectedno privileges on tablespace '%s'ROLE '%s' not granted to '%s'system privileges not granted to '%s'command no longer valid, see ALTER USERDEFAULT ROLE clause not valid for CREATE USERDEFAULT ROLE '%s' not granted to userinvalid command when OS_ROLES are being usedKeyword MIN or MAX expected, not foundMust supply an integer for the LAYER option P|2WMust supply an integer for the OPCODE optionInvalid dump logfile optionInvalid dump optionMust specify a file number or log sequence numberMust specify a block numberMust specify a time for the TIME optionMust specify a PERIODinvalid option for CREATE CONTROLFILEOnly specify RESETLOGS or NORESETLOGS onceYou must specify RESETLOGS or NORESETLOGSYou must specify a database name for CREATE CONTROLFILEIllegal ALTER TRACING option PCfMust specify a string for ALTER TRACING ENABLE or DISABLEMissing change numberIllegal archive optionIllegal character in change number %sMissing change numberMissing thread numberMissing sequence numbermissing or invalid password for role '%s'error during OS ROLE initializationCASCADE CONSTRAINTS must be specified to perform this revokeinvalid auditing option for tablesinvalid auditing option for DEFAULT JFfinvalid auditing option for procedures/packages/functionscannot create user as LICENSE_MAX_USERS parameter exceededinvalid option for OPTIMIZER_GOALclient os username is too longremote os logon is not allowedrole '%s' not authorized by operating systemerror opening password file '%s'invalid password file '%s'error closing password file '%s'error writing password file '%s'GRANT failed: cannot add users to public password file Dd!3serror reading password file '%s'GRANT failed: password file '%s' is fullGRANT failed: user '%s' is identified externallyREVOKE failed: user SYS always has SYSOPER and SYSDBApassword file mode has changed from '%s' to '%s'missing %s keyworduser SYS is not permitted to create indexes with freelist groupserror while writing to audit trailinvalid USERENV parametersecurity violation D 8Soimplicit (-1) length not valid for this bind or define datatypeinvalid packed decimal format stringcan't use ALLOCATE or DEALLOCATE options with REBUILDnon-zero scale specified for nonnumeric columnthe size specified for a file must not be zeromissing host connect stringduplicate database link namemissing USING keywordmissing CONNECT keywordcannot select FOR UPDATE from view with DISTINCT, GROUP BY, etc. >h:mcannot select FOR UPDATE from remote tablecannot use a subquery ina START WITH on a remote databaseinteger value requireddatabase link of same name has an open connectionconnection description for remote database not foundtoo many database links in useDDL operations are not allowed on a remote databaseremote statement has unoptimized view with remote objectSTART WITH or CONNECT BY predicate cannot be evaluated by remote data base Ja"6]vdatabase link not foundall tables in the SQL statement must be at the remote databasemissing LINK keywordmulti-row UPDATE of LONG column is not supportedfetching an exact number of rows is not supported by the servermissing FILE keywordcan only select from fixed tables/viewsno ROWID for fixed tablesclustered tables cannot be used before the cluster index is builta cluster index for this cluster already existsspeed bind not permitted DiGrillegal bundled operation combinationtoo many variables to describe with automatic cursor openuninitialized speed bind storagedefine is not allowed for array type bind by value is not allowed for array type remote database %s does not support two-phase commitclient database did not begin a transactiontoo many distributed transactionsmust end current transaction before executing %stransaction manager login denied: transaction in progress >y =xtoo many local sessions participating in global transactiondistributed transaction already beguncannot join the distributed transaction in progressattempt to begin distributed transaction without logging ontimeout: distributed transaction waiting for locktransaction %s rolled back, some remote DBs may be in-doubtanother session in same transaction failedremote transaction failure at %stransaction %s committed, some remote DBs may be in-doubt D[     G transaction %s in-doubtdistributed update operation failed; rollback required2PC: %s: bad two-phase command number %s from %s2PC: %s: bad two-phase recovery state number %s from %sno prepared transaction found with ID %sORA-2PC-CRASH-TEST-%s in commit commentselect for update specified a join of distributed tableslock table specified list of distributed tablesdistributed recovery received DBID %s, expected %spreceding %s%s from %s%s Dg4edistributed operation not supportedillegal option for ALTER SYSTEMmissing or invalid MTS_DISPATCHERS texttransaction or savepoint rollback requiredfollowing severe error from %s%sglobal_names parameter must be set to TRUE for this operationdatabase %s%s does not support %s in this contexterror initializing capabilities for remote database %sdistributed database network protocol mismatchsequence numbers not supported in remote updates Djv M!d"}#cannot %s in a distributed transactionunused errorsequence not co-located with updated table or long columnselects of long columns must be from co-located tablesinvalid setting for ALTER SYSTEM FIXED_DATEno new sessions may join a committing distributed transactiondatabase link is in usedatabase link is not opena loopback database link must have a connection qualifierdatabase name has illegal character '%s' $D%h&'()*2+\,s-database name is missing a componentdatabase link %s connects to %sdatabase (link) name is too longobject locked by another process in same transactiondistributed database option not installedCOMMIT is not allowed in a subordinate sessionnetwork error: attempted callback+passthrutransaction rolled backout of transaction table slots for distributed transactionTRANSACTIONS_PER_ROLLBACK_SEGMENT(%s) more than maximum possible(%s) .>/^0123$4W56replication option not installedspecified initialization parameter cannot be modifiedspecified initialization parameter is not modifiable with this optionunable to modify specified parametererror parsing index-table reference (:I)used for internal purposes, should never be printedPCC: out of memory (i.e., could not allocate)PCC: inconsistent cursor cache (uce/cuc mismatch)PCC: inconsistent cursor cache (no cuc entry for this uce) 7>8s9:; <H=z>?PCC: inconsistent cursor cache (out-of-range cuc ref)PCC: inconsistent host cache (no cuc available)PCC: inconsistent cursor cache (no cuc entry in cache)PCC: inconsistent cursor cache (OraCursor nr is bad)PCC: this pgm too old for run-time library: please re-PCC itPCC: invalid descriptor passed to run-time libraryPCC: inconsistent host cache (out-of-range sit ref)PCC: inconsistent host cache (invalid sqi type)PCC: heap consistency error @V\}]^_`ab%cDdhklmPCC: SELECT..INTO returns too many rowsinvalid tablespace nameinvalid OFFLINE optionmissing or invalid ALTER TABLESPACE optioninvalid STORAGE optionno option specified for ALTER CLUSTERmissing STORAGE optionSHARED specified multiple timesconflicting SHARED/EXCLUSIVE optionsEXCLUSIVE specified multiple timesinvalid DEFAULT tablespace identifierinvalid TEMPORARY tablespace identifierno options specified for ALTER USER nPokqrstu%vGwlxyzinvalid CREATE INDEX optioninstalled DLM does not support releasable locking modeinvalid value for MAXLOGFILESinvalid value for MAXDATAFILESinvalid value for FREELIST GROUPSDATAFILE clause specified more than onceinvalid option for CREATE DATABASEARCHIVELOG and NOARCHIVELOG specifiedLOGFILE clause specified more than onceinvalid value for FREELISTSFREELISTS storage option not allowedFREELIST GROUPS storage option not allowed {D|c}~$Ayinvalid value for MAXLOGHISTORYThe PUBLIC keyword is not appropriate for a disable threadinvalid option for DROP TABLESPACEMissing required thread numberinvalid rollback segment nameinvalid option for CREATE ROLLBACK SEGMENTMissing required group numbercorrect syntax is: SET TRANSACTION READ { ONLY | WRITE }valid options: ISOLATION LEVEL { SERIALIZABLE | READ COMMITTED }invalid option for CREATE TABLESPACE Dcz Kf~invalid option to ROLLBACK WORKsavepoint name expectedvalid options: ISOLATION_LEVEL { SERIALIZABLE | READ COMMITTED }resource quotas are not allowed in REVOKEa token other than WORK follows COMMITtablespace resource privilege may not appear with other privilegesinvalid quota specificationON requiredkeyword TABLES expectedcorrect syntax is: SET TRANSACTION USE ROLLBACK SEGMENT D3ZqPCTINCREASE not allowed for rollback segment storage clausesevent specification syntax error %s (minor error %s) near '%s'Attempt to create %s object in a %s tablespacePERMANENT/TEMPORARY option already specifiedfile list already specifiedONLINE/OFFLINE option already specifiedmissing DATAFILE clauseWITH GRANT OPTION not allowed for PUBLICsequence not allowed hereno more tables permitted in this cluster Jm"IfINITIAL storage options not allowedALTER, INDEX, REFERENCE and EXECUTE not allowed for viewsonly SELECT and ALTER privileges are valid for sequencesduplicate INITRANS option specificationinvalid INITRANS option valueduplicate MAXTRANS option specificationinvalid MAXTRANS option valueno options specified for ALTER TABLEinvalid value for PCTFREE or PCTUSEDduplicate PCTFREE option specificationduplicate PCTUSED option specification Jo9`duplicate BACKUP option specificationduplicate tablespace name clausetablespace name expectedduplicate storage option specificationinvalid INITIAL storage option valueinvalid NEXT storage option valueinvalid MINEXTENTS storage option valueinvalid MAXEXTENTS storage option valueinvalid PCTINCREASE storage option valueinvalid OPTIMAL storage option valueEXECUTE privilege not allowed for tables V>Pbonly EXECUTE privilege is valid for proceduresinvalid MAXEXTENTS value (max allowed: %s)invalid cluster nameduplicate SIZE specificationinvalid SIZE option valueinvalid ALTER CLUSTER optionmissing or invalid option to ALTER DATABASEinvalid MOUNT modeinvalid CLOSE modechanges to this table are already loggedthis table logs changes to another table alreadyinvalid file nameinvalid file size Jx"Nsfilename lists have different numbers of filesthere are objects which reference this sequenceinvalid value for OBJNO or TABNOmust of form EXTENTS (FILE BLOCK SIZE , ...)no options specified for ALTER INDEXinvalid ALTER INDEX or ALTER SNAPSHOT optioninvalid ALTER ROLLBACK SEGMENT optioninvalid ROLLBACK SEGMENT namemissing EVENTS textno option specified for ALTER SESSIONinvalid option for ALTER SESSION Dn$2|missing or invalid value for MAXLOGMEMBERSmissing or invalid constraint namesubquery not allowed herecheck constraint condition not properly endedconstraint specification not allowed hereDEFAULT not allowed hereobsolete 7.1.5number, type and size of referencing columns must match referenced columnsmaximum number of columns exceededduplicate or conflicting NULL and/or NOT NULL specifications8c+Vduplicate UNIQUE/PRIMARY KEY specificationstable can have only one primary keysuch unique or primary key already exists in the tableORA-%05d occurs while type-checking column default value expressionneed to specify the datatype for this columnname already used by an existing constraintcannot derive the datatype of the referencing columnunique/primary keys in table referenced by enabled foreign keys >rIcolumn type incompatible with referenced column typereferenced table does not have a primary keykey column cannot be of LONG datatypeno matching unique or primary key for this column-listtable does not have such constraintconstrained column cannot be of LONG datatypethis unique/primary key is referenced by some foreign keysduplicate referential constraint specificationssuch a referential constraint already exists in the table >n.cdefault value type incompatible with column typeinvalid sequence nameduplicate or conflicting MAXVALUE/NOMAXVALUE specificationsduplicate or conflicting MINVALUE/NOMINVALUE specificationsduplicate or conflicting CYCLE/NOCYCLE specificationsduplicate or conflicting CACHE/NOCACHE specificationsduplicate or conflicting ORDER/NOORDER specificationscannot alter starting sequence numberduplicate INCREMENT BY specifications Dg3mduplicate START WITH specificationsno options specified for ALTER SEQUENCEsequence number not allowed hereinvalid OPEN modesequence does not existcheck constraint (%s.%s) violatedintegrity constraint (%s.%s) violated - parent key not foundintegrity constraint (%s.%s) violated - child record foundcannot enable (%s.%s) - check constraint violatedcannot add referential constraint - parent keys not found >v/ .0 `1 2 found more than one enable/disable clause for constraintcannot enable (%s.%s) - null values foundcannot disable constraint (%s.%s) - dependencies existcannot enable (%s.%s) - parent keys not foundcannot enable (%s.%s) - duplicate keys foundRecord %s: Rejected - Error on table %s, column %sDirect path connection must be homogeneousMultibyte character errorConversion initialization error occurred on field %s 3 >4 l5 6 7 8 9 Y: ~; Conversion error occurred on CONSTANT field %sThe database is out of space. The load cannot continuePacked Decimal conversion errorZoned Decimal conversion errorField in data file exceeded maximum specified lengthColumn not found before end of logical record (use TRAILING NULLCOLS)Initial enclosing character not foundLogical record ended - second enclosing character not presentNo terminator found after TERMINATED and ENCLOSED field < >= l> ? @ A B 5C _D Record %s: Discarded - failed all WHEN clausesIndex %s was left in Direct Load State due toThe following index(es) on table %s were processed:Index %s was loaded.Record %s: Discarded - all columns null.Warning: Variable length field was truncated.Record %s - Warning on table %s, column %sLoader must be at least version %s.%s.%s.%s.%s for direct pathRelative start position > absolute field end position. E PF |H I J K L M N AO {V W Error parsing insert statement for table %s.No more slots for read buffer queue.invalid or redundant resourceinvalid resource limitduplicate resource name %sprofile %s already existsprofile %s does not existcannot drop PUBLIC_DEFAULT profileprofile %s has users assigned, cannot drop without CASCADEillegal cost factorexceeded COMPOSITE_LIMIT, you are being logged offexceeded simultaneous SESSIONS_PER_USER limit X DY Z [ \ ] ,^ `_ ~a b exceeded session limit on CPU usage, you are being logged offexceeded call limit on CPU usageexceeded session limit on IO usage, you are being logged offexceeded call limit on IO usageexceeded maximum idle time, please connect againexceeded PRIVATE_SGA limit, you are being logged offexceeded procedure space usageexceeded maximum connect time, you are being logged offcannot EXPLAIN view owned by another userPLAN_TABLE not found c Jd qt u v w x ?y ~z { | plan table does not have correct formatspecified plan table not foundmissing schema authorization clausemissing or invalid schema authorization identifiermissing or invalid schema elementschema name does not match schema authorization identifierpotential circular view references or unknown referenced tablescreate table failedprivilege grant failedcreate view failedcould not add foreign key reference} 2~ n  N cannot drop index used for enforcement of unique/primary keycannot enable constraint (%s) - no such constraintcannot disable constraint (%s) - no such constraintcannot enable primary key - primary key not defined for tablecannot disable primary key - primary key not defined for tablecannot enable unique(%s) - unique key not defined for tablecannot disable unique(%s) - unique key not defined for table > {  M p  date or system variable wrongly specified in CHECK constraintcannot enable (%s.%s) - primary key violatedColumn check constraint cannot reference other columnsNonunique index exists on unique/primary key constraintCreate as select with referential constraints not allowedCannot drop nonexistent primary keyCannot drop nonexistent unique keyCannot drop constraint - nonexistent constraintCannot resolve referenced object in referential constraints D ^   W  Exceptions table not foundCREATE TABLE ... AS SELECT failed - check constraint violatedInvalid hash option - missing keyword ISduplicate HASHKEYS specificationinvalid HASHKEYS option valueduplicate HASH IS specificationNumber of hash keys per block (%s) exceeds maximum of %sThe number of cluster key column must be 1The HASH IS column specification must be NUMBER(*,0)The HASH IS option must specify a valid column > k  ) Z HASHKEYS must be specified for a HASH CLUSTERHashkey value must be a positive integerInappropriate index operation on a hash clusterInappropriate use of the INDEX optionDuplicate INDEX option specifiedDuplicate HASH IS option specifiedCluster definition can not be both HASH and INDEXInappropriate use of the HASH IS optionThe SIZE option is not allow to be altered for HASH CLUSTERS 2 q  h Column referenced in expression not found in cluster definitionConstant or system variable wrongly specified in expressionHash expression does not return an Oracle Number.TO_DATE, USERENV, or SYSDATE incorrectly used in hash expression.SYSDATE, UID, USER, ROWNUM, or LEVEL incorrectly used in hash expre\ssion.PL/SQL functions not allowed in hash expressionsError while evaluating the cluster's hash expression. > |  P {  Fixed hash area extents used (%s) exceeds maximum allowed (%s)can not create index due to parallel direct load on tablecan not perform parallel direct load on object %smerge into base segment would overflow MAXEXTENTS limiterror while translating file name for parallel loadtoo many event classes specified for eventstoo many id ranges specified for eventsSpecified an event class but gave no eventsIllegal ID value specified for events > h  - d  Low ID value is greater than high ID valueError in file %s. Check trace_dest init.ora parmError in writing file name %s. Check trace_dest init.ora parmtrace_block_size (%s) must be divisable by %smissing required file size in RESIZE clausemissing required keyword ON or OFF in AUTOEXTEND clausemissing required file block increment size in NEXT clauseinvalid file increment size in NEXT clauseinvalid or missing maximum file size in MAXSIZE clause J {  2 a {  cannot resize file %s, tablespace %s is read onlyosnoraenv: error translating ORACLE_SIDosnoraenv: error translating oracle image nameosnoraenv: error translating orapop image nameosnpopipe: pipe creation failedosndopop: fork failedosnpol: polling of communication channel failedosnshs: host name too longosnacx: cannot allocate context areaosnrntab: connect to host failed, unknown ORACLE_SIDosnpop: pipe creation failed P c  V    osnpop: fork failedosnpvalid: write to validation channel failedosnpop: malloc failedosnprd: message receive failureosnpwr: message send failureosnpgetbrkmsg: message from host had incorrect message typeosnpgetdatmsg: message from host had incorrect message typeosnpfs: incorrect number of bytes writtenosnprs: reset protocol errorosnfop: fork failedosnfop: shmat failedosnseminit: cannot create semaphore set J u  2 [ w  osnpui: cannot send break message to orapoposnpui: cannot send break signalosnpbr: cannot send break message to orapoposnpbr: cannot send break signalosnpop: access error on oracle executableosnpop: access error on orapop executableosnfop: access error on oracle executableosncon: driver not in osntabosnrnf: cannot find user logon directoryosnrnf: malloc of buffer failedosnrnf: cannot find a matching database alias D d  ; Y  osnsnf: database string too longosnftt: cannot reset shared memory permissionosnfpm: cannot create shared memory segmentosnfpm: illegal default shared memory addressosnpcl: cannot tell orapop to exitosnpwrtbrkmsg: incorrect number of bytes writtenosncon: host alias is too longosnfsmmap: cannot open shared memory file ?/dbs/ftt_.dbfosnfsmmap: cannot map shared memory fileosnfsmmap: illegal shared memory address D n   A i  osnfsmmap: cannot close shared memory fileosnfsmmap: cannot change shared memory inheritenceosnfsmcre: cannot create chared memory file ?/dbs/ftt_.dbfosnfsmnam: name translation failureosnfop: fork_and_bind failedAllocation of internal array failedNot enough request descriptors availableClient close of file failed.File number to be canceled is negative.file number to be cancelled is greater than the maximum. P u  + P q   Unable to cancel at least one requestInvalid package modeInvalid maximum number of serversInvalid maximum of request descriptorsLess than one request descriptor was allocated per serverMaximum number of files is invalidSetting of handler for SIGTERM failedTotal number of blocks is invalidIllegal request time out valueInvalid maximum server idle timeInvalid maximum client wait timeInvalid request list latch time out value J e , Z   Invalid request done signalValue for request done signal exceeds maximumStat failed on log directoryName given for the log directory is invalidStat failed on core dump directoryName given for the core dump directory is invalidInvalid value given for the timing wanted flagBoth read and write functions were not specifiedBoth post and wait functions were not specifiedInvalid shared memory ID specifiedInvalid shared memory buffer size D ~   I   Size needed for shared region is greater than segment sizeUnable to allocate memory for segment listUnable to find kernel process pointer in async process arrayMaximum number of files reachedFile name is too longUnable to open file for use with asynchronous I/OUnable to fstat() a file being used for asynchronous I/O.Close of asynchronous I/O failed.Client unable to get key for shared memoryRequest list is empty V z  5 b   Done request is not in correct stateNo requests availableInvalid number of requestsUnable to arm signal handlerRequests timed outOperations timed outNo idle servers available in parallel modeRetrieval of current time failedAllocation of memory failed for log file nameUnable to set handler for SIGTPAUnable to set handler for SIGALRMAllocation of memory for I/O vectors failed.Allocation of memory of open files array failed. P e  ' E ] h  Jump buffer not validUnable to make temporary file name for memory mapped fileUnable to attach shared memory segmentBad attach addressUnable to make temporary file name in order to get keyUnable to get shared memoryUnable to attach shared memoryUnable to kill a processRead failedLess than the number of blocks requested was read inWrite failedUnable to write the requested number of blocks  P ~   " L  Unable to read the requested number of blocks.Invalid block offsetBuffer is not aligned.Request free list is emptyRequest on free list was not freeIllegal block sizeInvalid file numberSegment free list is emptyNo segment of the proper size is availableSegment could not be split - no free segments availableSegment deallocation failed - empty segment listSegment deallocation failed - segment not on list  P o     " @ a x  Server was unable to close fileServer unable to open fileServer unable to send signal to clientUnable to create temporary key fileUnable to unlink temporary fileUnable to arm signal handler for the alarm signalSync of blocks to disk failed.Open of log file by client failedServer died on start upClient unable to fork a serverInvalid value for kernel flagInvalid value for the leave open flag  P x ! " # $ ,% S& {'  Invalid value for the timing wanted flagUnkillable serverServer did not terminate when postedAsynchronous I/O package is not runningRead failed because of an errorFile is closedRequest list is empty when it should not beInvalid critical-section time out valueInvalid server list latch time out valueInvalid number of request buffersNumber of requests is less than the number of slavesunimplemented feature J b r ! " # $ .% d& z' operator not implementedobsolete featureparameter COMPATIBLE >= %s needed for %scommunication area cannot be allocated; insufficient memoryinternal protocol errorfatal two-task communication protocol errororanet buffer underfloworanet: ORACLE does not support this interface versionoranet buffer overfloworanet: ORACLE does not support this SQL versionbreak received on communication channel ( J) {* + , - . 30 W1 2 3 a server linked as single-task cannot use SQL*Netend-of-file on communication channelnot connected to ORACLEunsupported network datatype or representationinvalid buffer length passed to a conversion routinetwo-task save area overflowtwo-task coroutine has invalid statetwo-task conversion routine: integer overflowno interface driver connected - function not performedattempt to close ORACLE-side window on user sideoperation would block 4 D5 [6 {7 8 9 : 2; i  two-task internal errorclient-server protocol violationnetwork driver does not support non-blocking operationsno new operations allowed until the active operation endsconnection is in blocking modethe next piece to be inserted is requiredthe buffer for the next piece to be fetched is requiredan invalid buffer was provided for the next piecethe segment type specification is invalidthe group number specification is invalid > e  M v  the scan limit specification is invalidconcurrent update activity makes space analysis impossiblesegment only contains %s blocks of unused space above high water markthe INITIAL extent may not be deallocatedboth ALLOCATE EXTENT and DEALLOCATE UNUSED options are specifiedduplicate DEALLOCATE option specificationduplicate ALLOCATE EXTENT option specificationinvalid SIZE specifiedduplicate ALLOCATE EXTENT option specification D ^  8 X invalid INSTANCE specifiedinvalid DATAFILE filename specifiedinvalid ALLOCATE EXTENT optionmissing ALLOCATE EXTENT optionspecified datafile %s does not existdatafile %s is not a member of tablespace %sALLOCATE EXTENT not valid for HASH CLUSTERSinvalid FREELIST GROUP specifiedboth FREELIST GROUP and INSTANCE parameters may not be specifiedInvalid truncate command - missing CLUSTER or TABLE keyword D u / cInvalid truncate option - missing STORAGE keywordTable to be truncated is part of a clusterCluster to be truncated is a HASH CLUSTERcannot resize datafile - file %s not foundfile contains %s blocks of data beyond requested RESIZE valuecannot shrink datafile - file %s is under hot backupcannot create dictionary table %sthe sum of PCTUSED and PCTFREE cannot exceed 100sequence parameter %s must be an integerINCREMENT must be a non-zero integer >|,Ssequence parameter %s exceeds maximum size allowed (%s digits)MINVALUE must be less than MAXVALUEINCREMENT must be less than MAXVALUE minus MINVALUESTART WITH cannot be less than MINVALUEMINVALUE cannot be made to exceed the current valueSTART WITH cannot be more than MAXVALUEMAXVALUE cannot be made to be less than the current valuethe number of values to CACHE must be greater than 1sequence %s must range between %s and %s D\ :robject is not a sequencenumber to CACHE must be less than one cycledescending sequences that CYCLE must specify MINVALUEascending sequences that CYCLE must specify MAXVALUEsequence %s no longer existsinvalid value for parameter max_dump_file_sizedeadlock detected while trying to lock object %s%s%s%s%stimeout occurred while waiting to lock object %s%s%s%s%scannot generate diana for object %s%s%s%s%serror ORA-%s occurred when querying %s%s%s8v7Oout of process memory when trying to allocate %s bytes (%s,%s)unable to allocate %s bytes of shared memory ("%s","%s","%s")package specification must be created first before creating package bodyprocedure, function, package, or package body does not existobject %s does not existprocedure, function, or package is not allowed hereerrors during recompilation/revalidation of %s.%sresults of compilation are too large to support J4Yinvalid or missing procedure, function, or package nameuser %s cannot use database link %s.%serror occurred when looking up remote object %s%s%s%s%serror occurred when validating remote object %s%s%s%s%sdatabase link %s does not existinsufficient privileges to execute %sexisting state of %s has been invalidated%s of %s has been changed%s has errorsnot executed, invalidated %snot executed, altered or dropped %s Vo3Kanon-executable object, %snot executed, %s does not existexisting state of packages%s%s%s has been discardedinvalid trigger namemissing BEFORE or AFTER keywordinvalid trigger typecolumn list not valid for this trigger typeinvalid REFERENCING nameinvalid trigger actioninvalid NEW or OLD specificationWHEN clause cannot be used with table level triggersOLD and NEW values cannot be identicalinvalid trigger specification >Yt6vtrigger '%s' does not existtrigger '%s' already existsNEW or OLD references not allowed in table level triggersinvalid trigger variable '%*.s'cannot change trigger NEW values in after row triggerscannot change the value of an OLD reference variabletrigger description too long, move comments into triggering codecannot change the value of ROWID reference variableerror during execution of trigger '%s.%s'8f+acannot create triggers on objects owned by SYS'%s' specifies same table, event and trigger time as '%s'table %s.%s is mutating, trigger/function may not see itcannot %s in a triggerreferences to columns of type LONG are not allowed in triggerstable %s.%s is constraining, trigger may not modify ittrigger '%s' already exists on another table, cannot replace ittrigger '%s' has a WHEN clause which is too large, limit 2K Ppqrs6tPurvwyDDL conflict while trying to drop or alter a triggertrigger '%s' is invalid and failed re-validationtrigger '%s' is valid but not stored in compiled formNETASY: port open failureNETASY: port set-up failureNETASY: port read failureNETASY: port write failureNETASY: dialogue file open failureNETASY: dialogue file read failureNETASY: dialogue execute failureNETASY: bad dialogue formatNETASY: dialogue filename too longz\{z(D]nNETASY: dialogue file too longNETASY: dialogue too longNETASY: message receive failureNETASY: message send failureNETASY: invalid login (connect) stringNETASY: initialisation failureNETASY: connect failedNETASY: channel open failureNETASY: port open failureNETASY: VTM errorNETASY: Configuration errorNETASY: port close failureNETASY: channel close failureNETASY: unable to intialise for logging >]"UNETASY: port assignment failureNETDNT: connect failed, unrecognized node nameNETDNT: connect failed, unrecognized object nameNETDNT: connect failed, access control data rejectedNETDNT: connect failed, partner rejected connectionNETDNT: connect failed, partner exited unexpectedlyNETDNT: connect failed, insufficient resourcesNETDNT: connect failed, no response from objectNETDNT: connect failed, node unreachable PBfNETDNT: connect failed, network driver not loadedNETDNT: connect failedNETDNT: invalid login (connect) stringNETDNT: disconnect failedNETDNT: message receive failureNETDNT: message send failureNETDNT: connect failed, byte count quota exceededNETTCP: cannot allocate context areaNETTCP: remote host is unknownNETTCP: socket creation failureNETTCP: ORACLE network server not foundNETTCP: connect to host failed Vu$KzNETTCP: message receive failureNETTCP: message send failureNETTCP: disconnect failureNETTCP: invalid buffer sizeNETTCP: Too many connectionsNETTCP: SID lookup failureNETTCP: unable to create ORACLE logicalsNETTCP: unable to create ORASRV processNETTCP: unable to create ORASRV: quota exceededNETTCP: unable to complete handshake with ORASRVNETTCP: spurious client requestNETTCP: network driver not loadedNETTCP: access failure Pe6kNETTCP: setup failureNETTCP: cannot set KEEPALIVENETTCP: timeout waiting for ORASRVNETTCP: ORASRV exited unexpectedlyNETTCP: ORASRV unable to open network connectionNETTCP: unable to change usernameNETTCP: unable to create mailboxNETTCP: unable to transfer socket ownership to ORASRVNETTCP: host access deniedNETTCP: user access deniedNETTCP: access denied, wrong passwordNETTCP: file not found Jq/LrNETTCP: file access privilege violationNETTCP: connection rejected; server is stoppingNETTCP: error during connection handshakeNETTCP: error during connection handshakeNETTCP: error during connection handshakeNETTCP: no such userNETTCP: no privilege for userNETTCP: error getting user informationNETTCP: maximum connections exceededNETTCP: SID (database) is unavailableNETTCP: unable to start ORASRV: images not installed 8D9q:;<=/>a?@ATWOTASK: connect failed, can't create mailboxTWOTASK: connect failed, can't attach to mailboxTWOTASK: connect failed, can't spawn ORASRV processTWOTASK: connect failed, handshake failureTWOTASK: connect failed, can't access ORASRV2.COMTWOTASK: connect failed, can't create logical nameTWOTASK: message receive failureTWOTASK: message send failureTWOTASK: invalid login (connect) stringTWOTASK: connect failed, mailbox already exists B>CqDEFG+HhjkTWOTASK: connect failed, ORASRV exited unexpectedlyTWOTASK: connect failed, timeout waiting for ORASRVTWOTASK: connect failed, logical name table is fullTWOTASK: connect failedTWOTASK: connect failed, insufficient quotas to create ORASRVTWOTASK: connect failed, ORASRV protected image not installedTWOTASK: connect failed, can't find ORASRV image fileNETNTT: cannot allocate send and receive buffersNETNTT: cannot translate address file name lPmpnopq r<s`tuvwNETNTT: cannot open address fileNETNTT: cannot read arguments from address fileNETNTT: cannot share connection to cubeNETNTT: cannot read pid of remote processNETNTT: remote fork failedNETNTT: cannot send command line to shadow processNETNTT: cannot allocate context areaNETNTT: cannot read from remote processNETNTT: cannot write to remote processNETNTT: nrange() failedNETNTT: nfconn() failedNETNTT: out of memory in pi_connectx\ywz{|7NhNETNTT: data protocol errorNETNTT: break protocol errorNETNTT: bad write lengthNETNTT: bad stateNETNTT: cannot read /etc/oratabIPA: Disconnect failureIPA: Cannot allocate driver contextIPA: Cannot connect to remote hostIPA: Message send errorIPA: Message receive errorIPA: Illegal message typeIPA: Message write length errorIPA: Cannot reset connectionIPA: No more connections available Ji ;TIPA: No message queue availableIPA: Environment variable(s) not setIPA: Maximum number of servers reachedIPA: Incorrect outgoing service name suppliedIPA: Shared memory failed to initialiseIPA: Event set up failureIPA: Invalid connect stringIPA: Invalid database SIDIPA: Local maximum number of users exceededIPA: Local maximum number of connections exceededIPA: Remote maximum number of users exceeded P E_IPA: Remote maximum number of connections exceededIPA: Cannot reach the remote sideIPA: Fatal shared memory errorIPA: Cause event errorNETCMN: No default host string specifiedNETCMN: invalid driver designatorNETCMN: error receiving break messageUnable to allocate memory.NETCMN: invalid login (connect) stringNETCMN: reset protocol errorNETCMN: error sending break messageNETCMN: unable to set up break handling environment P p=V q!NETCMN: incorrect message formatConnection not open.NETCMN: error on testNETCMN: server can not start oracleNETCMN: SID lookup failureNETCMN: Error detected in the read-in dataNETCMN: Error in sending dataNETCMN: Error in receiving datassaio: Seals do not matchssaio: Invalid Block numberssaio: Buffer Not Alignedssaio: LSEEK error, unable to seek to requested block.",#q$%&8'ssaio: read error, unable to read requested block from database file.ssaio: write error, unable to write requested block to database file.ssaio: asynchronous I/O failed due to incorrect parameters.ssaio: the asynchronous write was unable to write to the database file.ssaio: the asynchronous read was unable to read from the database file.ssaio: the asynchronous write returned incorrect number of bytes(8)w*+,-=.u/ssaio: the asynchronous read returned incorrect number of bytesssvwatev: Incorrect parameter passed to function callssvwatev: Failed with unexpected error number.ssvpstev: Incorrect parameter passed to function callssvpstev: Failed with unexpected error number.ssvpstevrg: Incorrect parameters passed to function callssvpstevrg: Failed with unexpected error number.ssvpstp: Incorrect parameter passed to function call 0J1wdefghlVmnossvpstp: Failed with unexpected error number.The list IO or the sysvendor is not installed.PL/SQL: storage errorPL/SQL: program errorPL/SQL: numeric or value errorPL/SQL: Function returned without valuePL/SQL: Return types of Result Set variables or query do not matchPL/SQL: could not find program unit being calledPL/SQL: ICD vector missing for this packagePL/SQL: unhandled user-defined exceptionPL/SQL: cursor already open pPq\r5`at %sline %sPL/SQL: index for PL/SQL table out of range for host language arrayPL/SQL: The remote call cannot be handled by the serverPL/SQL: compilation errorPL/SQL: compilation error - compilation abortedPL/SQL: execution errorPL/SQL: execution error - execution abortedPL/SQL: internal error, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]line %s, column %s: %sPL/SQL: Unhandled exceptionPL/SQL: %sPLS-%s: %s8qWpackage DBMS_STANDARD must be created before using PL/SQLthis name is currently reserved for use by user SYSthe pipe is empty, cannot fulfill the unpack_message requestnull values are not allowed for any parameters to pipe icd'sbuffer in dbms_pipe package is full. No more items allowedwrong datatype requested, %s, actual datatype is %spos, %s, is negative or larger than the buffer size, %sgiven statement is not supported by package DBMS_SQL D%Gdtype of out argument must match type of column or bind variabletop level procedure/function specified, cannot have subpartsobject %s does not existcannot execute %s from within stored procedureinvalid number of rows specifiedinvalid number of values specifiedobsolete ICD procedure calledshared pool object does not exist, cannot be pinnedFunction %s does not guarantee not to update databaseFunction %s has out arguments >uEmFunction %s modifies package state, cannot be used hereFunction %s references package state, cannot execute remotelyPackage or function %s is in an invalid stateHash Join ran out of memory while keeping large rows in memoryLU6.2 Driver: SNA software is not loadedLU6.2 Driver: Invalid database id stringLU6.2 Driver: Error allocating context areaLU6.2 Driver: Error allocating memoryLU6.2 Driver: Unable to allocate session with remote LU Jr>[LU6.2 Driver: Unexpected line turnaroundLU6.2 Driver: Unexpected response from SNALU6.2 Driver: Reset occurred in send stateLU6.2 Driver: Reset occurred in receive stateLU6.2 Driver: Failed during deallocationLU6.2 Driver: Request to send errorLU6.2 Driver: Send data errorLU6.2 Driver: Receive and wait errorLU6.2 Driver: Receive Immediate errorLU6.2 Driver: Send errorLU6.2 Driver: Attach to LU failed Jk ,.-Z./0LU6.2 Driver: Attach to PU failedLU6.2 Driver: Activation of subnetwork failedLU6.2 Driver: Unable to activate remote partnerLU6.2 Driver: Invalid remote partnerLU6.2 Driver: Allocation errorLU6.2 Driver: Unable to attach to SNATLI Driver: incorrect message type from hostTLI Driver: incorrect number of bytes writtenTLI Driver: cannot allocate context areaTLI Driver: send break message failedTLI Driver: receive break message failed 1V2x34567$8=9X@tABJTLI Driver: remote node is unknownTLI Driver: service not foundTLI Driver: connection failedTLI Driver: message receive failureTLI Driver: message send failureTLI Driver: send interrupt break message failedTLI Driver: error on bindTLI Driver: error on acceptTLI Driver: error on connectTLI Driver: SID lookup failureTLI Driver: spurious client reqTLI Driver: connection setup failureTLI Driver: unable to open clone device KPLoMNOPQU:VdWXYTLI Driver: cannot alloc t_callTLI Driver: cannot alloc t_disconTLI Driver: failed to receive disconnectTLI Driver: cannot connectTLI Driver: client failed to close error connTLI Driver: server not runningTLI Driver: connection failedTLI Driver: unable to open protocol deviceTLI Driver: cannot alloc t_bindTLI Driver: cannot alloc t_bindTLI Driver: listener cannot bindTLI Driver: listener already running ZP[o\]^_`a/bYcdeTLI Driver: cannot alloc t_callTLI Driver: error in listenTLI Driver: cannot allocate t_disconTLI Driver: option not allowed across networkTLI Driver: sync failedTLI Driver: bound addresses unequalTLI: error in signal setupTLI Driver: name-to-address mapping failedTLI Driver: unable to get local host addressTLI Driver: cannot close transport endpointTLI Driver: cannot open oratabTLI Driver: server got bad command hJiujklmn9o`rstTLI Driver: timeout reading orderly releaseTLI Driver: error sending orderly releaseTLI Driver: error reading orderly releaseTLI Driver: error sending disconnectTLI Driver: error reading disconnectTLI Driver: error awaiting orderly releaseTLI Driver: close failed during releaseTLI Driver: alloc failed during releaseTLI Driver: error sending versionTLI Driver: error reading versionTLI Driver: error sending command uPvqwxyz{|5}WTLI Driver: error reading commandTLI Driver: error sending break modeTLI Driver: error reading break modeTLI Driver: error sending parmsTLI Driver: error reading parmsTLI Driver: error sending ccodeTLI Driver: error reading ccodeTLI Driver: recv error code failedTLI Driver: error reading negotation stringTLI Driver: poll failedTLI Driver: poll returned error eventTLI Driver: server cannot exec oracle8d FyTLI Driver: server cannot create new processTLI Driver: shadow process could not retrieve protocol infoTLI Driver: SQL*Net SPX client went away during reconnectTLI Driver: listen for SPX server reconnect failedTLI Driver: could not open the /etc/netware/yellowpages fileTLI Driver: the IPX device file could not be openedTLI Driver: could not bind an IPX address at initializationTLI Driver: could not send datagram SAP packet for SPX8vMTLI Driver: could not complete protocol initialization for SPXTLI Driver: could not open ethernet device driver fileTLI Driver: could not link IPX and ethernet streamsTLI Driver: could not clear the IPX ethernet SAP at initTLI Driver: could not set the IPX ethernet SAP at initTLI Driver: could not set the IPX network number at initTLI Driver: could not read the ethernet driver's node addressTLI Driver: the configured ethernet address is incorrect Dw%UxTLI Driver: the SPX device file could not be openedTLI Driver: could not link SPX and IPX streamsTLI Driver: could not set the SPX SAP addressTLI Driver: could not read the Novell network addressCMX: cannot read tns directoryCMX: no local name assigned to local applicationCMX: cannot attach to cmx subsystemCMX: cannot read transport address of remote applicationCMX: no transport address available for remote applicationCMX: connect error Jv!;UCMX: cannot get maximum packet size from CMXCMX: error during connect confirmationCMX: error during transfer of ORACLE_SIDCMX: error during acknowledge of ORACLE_SIDCMX: Cannot start oracle process on remote machineCMX: t_event returns ERRORCMX: write error in datarqCMX: error during redirection of connectionCMX: unexepected event during start of oracleCMX: unknown t_event in datarqCMX: error in data read (t_datain) P}   ( D cCMX: error in data read (too many bytes read)CMX: T_NOEVENT during wait for read eventCMX: error during write request (unknown event)CMX: getbrkmsg illegal datatypeCMX: getdatmsg illegal datatypeCMX: bad write lengthCMX: illegal break conditionCMX: wrong break message lengthCMX: disconnect during connect requestCMX: T_ERROR during read dataCMX: T_DATAIN received before all data writtenCMX: wrong ORACLE_SID Vx&'()Y*r+,-CMX: error when sending ORACLE_SIDCMX: error when checking ORACLE_SIDCMX: error during read_properties for serverCMX: error in local nameCMX: error during attachNo errorOperating system call errorRemote end of the communication issued a forward-reset packet. Not enough virtual memoryIllegal file nameNumber of database servers exceed limitFailed to get local host nameNo SID is currently available .P/s01:;<!=F>f?@AFailed to access configuration fileBuffer I/O quota is too smallFailed to access log fileInsufficient privilege for attempted operationX.25 Driver: remote host is unknownX.25 Driver: error while receiving dataX.25 Driver: error while sending dataX.25 Driver: invalid buffer sizeX.25 Driver: SID lookup failureX.25 Driver: connect to host failedX.25 Driver: endpoint creation failureX.25 Driver: X.25 Level 2 failure B>Cb !"#$0%r&X.25 Driver: Too many callback triesX.25 Driver: server cannot start oracleslsid: oracle_sid not set.slhom: oracle_home variable not set in environment.sltln: invalid parameter to sltln.sltln: attempt to translate a long environment variable.sltln: name translation failed due to lack of output buffer space.slgtd: time error, unable to obtain time.slgtd: gettimeofday error, unable to obtain time. '>(s)*+,'-R./sigpidu: process id string overflows internal buffer.sfwfb: failed to flush dirty buffers to disk.sfofi: file size limit was exceeded.slcpu: getrusage error, unable to get cpu time.slgcs: gettimeofday error, unable to get wall clock.slcpu: times error, unable to get cpu time.slgcs: times error, unable to get wall clock.slgunm: uname error, unable to get system information.slsget: getrusage error. 0>1|23456Q78slghst: gethostname error, unable to get name of current host.sltln: environment variable cannot be evaluated.slkhst: could not perform host operationslspool: unable to allocate spooler argument buffer.slspool: wait error.slspool: exec error, unable to start spooler program.slspool: line printer spooler command exited with an error.slspool: fork error, unable to spawn spool process.sfnfy: failed to obtain file size limit; errno = %s. 9J:;<=>?M@}ABCsldext: translation error, unable to expand file name.rtneco: unable to get terminal mode.rtneco: unable to set noecho mode.rtecho: unable to restore terminal to echo mode.slcpuc: error in getting number of CPUs.slemcr: fopen error, unable to open error file.slemcc: invalid file handle, seals do not match.slemcc: fclose error.slemcw: invalid file handle, seals do not match.slemcw: fseek error.slemcw: fwrite error. DDEWFGHIJK1LlMslemop: open error.slemcl: invalid file handle, seals do not match.slemcl: close error.slemrd: invalid file handle, seals do not match.slemrd: seek error.slemrd: read error.slembfn: translation error, unable to translate error file name.sftget: supplied buffer not big enough to hold entire line.ssfccf: create file failed, file size limit reached.sfccf: unable to lseek and write the last block.N8OhPRSTNUVsfofi: open error, unable to open database file.sfrfb: read error, unable to read requested block from database file.sfwfb: write error, unable to write database block.spcre: semget error, unable to get first semaphore set.spcre: semget error, could not allocate any semaphores.spcre: semget error, could not allocate semaphores.spdes: semctl error, unable to destroy semaphore set.spdcr: translation error while expanding ?/bin/oracle. WDXhYZ[\3]E^y_`spini: cannot set up signal handler.sptrap: cannot set up signal handler to catch exceptions.spdcr: translation error expanding program name.spdcr: fork error, unable to create process.spdcr: exec error, detached process failed in startup.spdcr: wait error.spdde: kill error, unable to send signal to process.sptpa: sptpa called with invalid process id.sptpa: kill error.spwat: semop error, unable to decrement semaphore. aJb|cdefg=hbijksppst: semop error, unable to increment semaphore.sppst: invalid process number passed to sppst.spwat: invalid process number.szguns: getpwuid error.spdcr: detached process died after exec.spalck: setitimer error, unable to set interval timer.spwat: invalid oracle process number.spwat: invalid semaphore set id.sppst: invalid semaphore id.spdcr: access error, access to oracle denied.unable to send signal to process l>mYnopq r;sStno dba group in /etc/group.spdde: illegal pid passed as argument.splon: ops$username exceeds buffer length.spcre: semget error, unable to get first semaphore set.soarch: malloc of temporary buffer for file-to-file copy failed.soarch: interrupt received.soaprd: string overflow.soaprd: invalid volume size for archive destination.soaprd: volume size specification not terminated properly. u>vzwxyz |Y}~soaprd: volume size should not be specified for a disk file.soagdi: cannot obtain device information.soagdi: unsupported device for log archiving.soabfn: string overflow when constructing filename.soafls: write to tape failed.soagdi: specified directory for archiving does not exist.soaotp: tape volume is too small to accommodate the log file.soaotp: cannot open the current tape volume.soaotp: cannot allocate buffer for tape write.8g0lsoaotp: cannot find out the status of log file.soaotp: lseek error, unable to seek to beginning of log file.soaotp: read error, unable to read header block.soacls: trying to close a file that has been closed.soacls: failed to close the tape device.smscre: translation error while expanding ?/dbs/sgadef@.dbf.smscre: ?/dbs/sgadef@.dbf file already exists when creating sga.smscre: create failure in creating ?/dbs/sgadef@.dbf. >c Esmscre: illegal database buffer size.smscre: illegal redo buffer size.sms1sg: ftok error in creating sga.sms1sg: shmget error, unable to get a shared memory segment.sms1sg: shmat error, unable to attach sga.smscre: write error when writing ?/dbs/sgadef@.dbf file.smscre: close error, unable to close ?/dbs/sgadef@.dbf file.smscre: unable to create sga.smsdes: name translation failure of sgadef.dbf file name.8kMsmsdes: open error, unable to open sgadef.dbf file.smsdes: read error, unable to read sgadef.dbf file.smsdes: shmctl error when trying to destroy shared memory segment.smsdes: close error, unable to close sgadef.dbf file.smsdes: unlink error, unable to destroy sgadef.dbf file.smsget: translation error when expanding sgadef.dbf filename.smsget: open error when opening sgadef.dbf file.smsget: read error when trying to read sgadef.dbf file. >l8jsmsget: shmat error when trying to attach sga.smsget: shmat error, unable to attach segment at requested address.smsget: close error, unable to close sgadef.dbf file.smsfre: shmdt error, unable to delete sga.smpall: malloc error while allocating pga.smsacx: malloc error when allocating context area.smsfre: attempt to free un-mapped sga.smpdal: attempt to destroy pga when it was not mapped.smsmax: cannot guess the maximum size for a segment. >f-Uxsmscsg: too many shared memory segments.smsnsg: unable to allocate the fixed portion of the SGA.smsnsg: unable to allocate the variable portion of the SGA.smsnsg: unable to allocate redo buffers.smsnsg: unable to allocate database buffers.smsnsg: too many shared memory segments.smsmat: ftok error in creating sga.smsmat: shmget error, unable to get a shared memory segment.smsmat: shmat error, unable to attach sga. Dv)[usmscre: cannot test for existence of the sga file.spcre: maximum number of semaphore sets exceeded.sfccf: fstat error, unable to obtain file status.sfsrd: invalid block number.sfsrd: lseek error, unable to seek to requested blocksfsrd: read error, unable to read requested block.sfsrd: seals do not match.sfsrd: simulated error for testing purposes.sfccf: logical block size is invalid.sfccf: malloc error, unable to allocate write buffer. >i"\sfccf: create error, unable to create file.sfccf: close error, unable to close file.sfccf: open error, unable to open file.sfccf: fstat error, unable to obtain file status.sfccf: lseek error, unable to seek to beginning of file.sfccf: write error, unable to write database header block.sfccf: write error, unable to write to file.sfifi: invalid logical block size.sfifi: stat error, unable to obtain information about file. >~ Z}sfifi: malloc error, unable to allocate buffer for header block.sfifi: open error, unable to open file.sfifi: lseek error, unable to seek to beginning of file.sfifi: read error, unable to read header block.sfifi: close error.sfifi: invalid file, file does not have valid header block.sfifi: logical block size mismatch.sfofi: open error, unable to open database file.sfcfi: close error, unable to close database file. >ZUsfrfb: invalid block number.sfrfb: lseek error, unable to seek to requested blocksfrfb: read error, unable to read requested block from database file.sfrfb: read returned incorrect number of bytes.sfwfb: invalid block number.sfwfb: lseek error, unable to seek to requested block.sfwfb: write error, unable to write database block.sfwfb: write returned incorrect number of bytes.sfcmf: translation error, unable to expand file name. Ja8Rlsfcmf: new file exists.sfcmf: translation error, unable to expand old file name.sfccf: translation error, unable to expand file name.sfifi: translation error, unable to expand file name.sfgfs: seals do not match.sfgfn: seals do not match.sfcfi: seals do not match.sfrfb: seals do not match.sfwfb: seals do not match.sfccf: reuse specified, but file does not exist.sfccf: open error, unable to open file to reuse.8oUsftopn: translate error, unable to translate file name.sftopn: fopen error, unable to open text file.sftcls: fclose error, unable to close text file.sfccf: file mismatch, trying to reuse a file with different size.sfccf: file mismatch, trying to reuse a file with different block size.sfccf: function called with illegal option.sfccf: lseek error, unable to seek to begining of reuse file.sfccf: read error, unable to read header block of file. D.Usfccf: invalid header information, file is not a valid database file.sfccf: file exists.slemtr: translated name for the message file is too long.sptrap: cannot restore user exception handlers.sprst: cannot restore user signal handler.sfanfy: db_writers parameter not valid.sfareq: Timeout occurred waiting for request to complete.sfcfi: Close failed in one of the database writers.slbtpd: invalid number.slbtpd: invalid exponent.8l)gslbtpd: overflow while converting to packed decimal.slpdtb: invalid packed decimal nibble.slpdtb: number too large for supplied buffer.slgfn: full path name too big for supplied buffer.sfaslv: Error getting entry in asynchronous write array.sfcopy: source and destination logical block sizes must match.sfcopy: allocation of memory buffer failed.slpath: allocation of memory buffer failed.8z-eslpath: pathname construction failed; lack of output buffer space.sfareq: One or more database writers not active.sfareq: Database writer got error in timing function.sfareq: Database writer got error in timing function.sfccf: Illegal file type.sfcopy: failed to read from the source file during copy.sfcopy: failed to write to the destination file during copy.sfrfb: read failed because buffer was not aligned properly. D Dk sfwfb: write failed because buffer was not aligned properly.sdpri: error %s in translating dump file location.spstp: cannot obtain the location of dbs directory.spstp: cannot change directory to dbs.smsgsg: ftok() returned error in calculating key for sga.smsgsg: shmget() failed to get segment.smsgsg: calculated and stored keys do not match.fork failedunable to perform nested sleepsfrnms: the mirror side status parameter is invalid D w6Knsfgmsn: the mirror side status parameter is invalidinvalid parameter passed to an resilvering testing functionWMON process terminated with errorfunction address must be aligned on %s byte boundaryfunction address must be in the range %s to %sfunction %s not foundfunction address %s is not readableexception encountered: core dump [%s] [%s] [%s] [%s] [%s] [%s]sdnfy: bad value '%s' for parameter %s.ssarena: usinit failed. >qO~ ssarena: maximum number of shared arenas exceeded.sc: usnewlock failed.sms1sg: vm_mapmem error, unable to create shared memory.sms1sg: shared memory attach address incorrect.sms1sg: failed to change SGA inheritance.smsmat: vm_mapmem error, unable to create shared memory.smsmat: shared memory attach address incorrect.smsmat: failed to change SGA segment inheritence.smsmax: cannot get cluster size.!8"q#$%&J'(smsdes: name translation failure of sgadef.dbf file name.smsdes: close error, unable to close sgadef.dbf.smsvmfcre: name translation failure of sgadef.dbf file name.smsvmfcre: sgadef.dbf already exists when creating SGA.smsvmfcre: create failure in creating sgadef.dbf file.smsget: name translation error of sgadef.dbf file name.smsget: open error when opening sgadef.dbf file.smsget: vm_mapmem or vm_allocate error when trying to attach SGA. )>*m+,-.-/P01smsget: shared memory attach address incorrect.smsget: failed to change SGA segment inheritence.smsget: close error, unable to close sgadef.dbf file.spwat: mset wrror, unable to set semaphore.sppst: mclear error, unable to clear semaphore.snclget: cannot get cluster number.snclrd: name translation error of sgadef.dbf file name.snclrd: open error when opening sgadef.dbf file.snclrd: read error when trying to read sgadef.dbf file. 2D3y4567 8.9d:;snclrd: close error, unable to close sgadef.dbf file.slsget: cannot get vm statistics.slsget: cannot get mapped memory statistics.scgcmn: lock manager not initialized.scgcmn: cannot get lock status.scgcmn: cannot open or convert lock.snchmod: cannot change permissions on ?/dbs/sgalm.dbf.snlmatt: cannot attach to lock manager instance.snlmini: cannot create lock manager instance.snlkget: cannot convert(get) lock. <P=r>?@ A.BMCiDEFGsnlkput: cannot convert(put) lock.scg_get_inst: cannot open instance number lock.scg_get_inst: cannot convert(get) instance number lock.scg_init_lm: cannot create lock manager instance.scgrcl: lock manager not initialized.scgrcl: cannot get lock status.scgrcl: cannot convert lock.scgrcl: cannot cancel lock request.scgrcl: cannot close lock.scgrcl: lock manager error.scgcm: unexpected error.spwat: lm_wait failed. HPIfJKLMNO0PQQqRSsppst: lm_post failed.sdpri: cannot create trace file '%s'; errno = %s.spstp: Unable to open /dev/resched.spglk: Cannot reschedule.scglaa: $cantim unexpected returnscgtoa: $deq unexpected returnscgcmn: $enq unexpected returnscgcmn: $setimr unexpected returnscgcmn: $hiber unexpected returnscggt: $enq parent lock unexpected returnscgrl: $deq unexpected return on lockid %sscgcm: unexpected lock status condition T>U`VWXY.Ze[\scgfal: $deq all unexpected returnscgfal: $deq parent lock unexpected returnscgbrm: $getlki unexpected return on lockid %ssscggtl: $enq unexpected return for master termination locksscggtl: $enq unexpected return for client termination locksscgctl: $deq unexpected return on cancel of term. lockscgcan: $deq unexpected return while canceling locksfccf: UIC group <= MAXSYSGROUP - file operations not allowedsfccf: $open file error ]P^_`ab+cBdXexfghsfccf: existing file size mismatch with specified file sizesfccf: illegal file creation optionsfccf: REUSE not allowed since file owner group <= MAXSYSGROUPsfccf: illegal logical block sizesfccf: $create file errorsfccf: new file existssfccf: $connect errorsfccf: $write (zero file) errorsfccf: $close errorsfifi: illegal logical block sizesfifi: UIC group <= MAXSYSGROUP - file operations not allowedsfifi: $open error iPjdkwlmnop3qKrstsfifi: $close errorsfofi: $open errorssfccf: $DISPLAY errorsfcfi: $dassgn errorsfifi: Cannot open file since file owner group <= MAXSYSGROUPscginq: $getlki unexpected return on lockid %ssfrfb: illegal logical block numbersfrfb: $qio(read) errorsfccf: Cannot create file since file owner group <= MAXSYSGROUPsfsgrow: $qiow failedsfqioini: $qio errorsfqioast: I/O completion ast error uPvywxyz:{Q|f}~sfifi: Cannot identify zero-length file.sfccf: Cannot create-reuse anything but top version of file.sfrfb: Cannot read from zero-length file.sfqio: asynchronous I/O not completed successfullysfcmf: $PARSE failure (filename syntax)sfcmf: new file existssfcmf: $OPEN failuresftopn: Maximum number of files already opensftopn: $OPEN failuresftopn: $CONNECT failuresftcls: $CLOSE failuresftget: $GET failure Ph'Zosfofi: out of open filessfcopy: source & destination logical block sizes must matchsfqioast: illegal pending valuesfotf: $create errorssfctf: illegal logical block size specified for tape filessfctf: $create errorsfdone: asynchronous I/O not completed successfullysltln: $trnlog errorszprv: $IDTOASC failuresldext: extension must be 3 characterssldext: $PARSE failuresldext: wildcard in filename or extension Vm1[}sldext: $SEARCH failureslspool: $OPEN failureslspool: $CLOSE failureszrfc: $IDTOASC failureszrfc: $FIND_HELD failureszrfc: insufficient rolename buffer spaceslkhst: could not perform host operationszrfc: $GETUAI failuresspexst: $GETJPIW failure on process id %sno such user in authorization fileszprv: $FIND_HELD failurespini: $DCLEXH failurespstp: $GETJPIW failure V #Jczspstp: cannot derive SID from unexpected process namespstp: ORA_SID has illegal valuespdcr: invalid value for ORA_sid_(proc_)PQL$_itemspdcr: $PARSE failurespdcr: $SEARCH failurespdcr: $CREPRC failurespdcr: $GETJPIW get image name failurespdde: system id not setspdde: $DELPRC failurespdde: $GETJPIW failuresspgprv: Error obtaining required privilegesssprprv: Error release privilegesspiip: $GETJPIW failure\t3Kc{sppid: $GETJPIW failuresptpa: $GETJPIW failurespguns: $GETJPIW failurespwat: $SETIMR failurespwat: $SCHDWK failureslkmnm: $GETSYIW failurespguno: $GETJPIW failurespgto: $GETJPIW failureszprv: $ASCTOID failureszprv: $CHKPRO failureszaud: $SNDOPR failureszprv: $GETUAI failureszprv: $HASH_PASSWORD failure$GETJPIW failed in retrieving the user's MAC priviledges8oX$GETUAI failed in retrieving the user's clearance level$GETJPIW failed in retrieving the user's process label$CHANGE_CLASS failed in retrieving the user's process label$CHANGE_CLASS failed in retrieving the specified file label$CHANGE_CLASS failed in retrieving the specified device label$FORMAT_CLASS failed translating the binary label to a string$IDTOASC failed translating a secrecy level$IDTOASC failed translating an integrity levelh 7Md{smscre: illegal database block sizesmscre: illegal redo block sizesmscre: $CREATE failuresmscre: $CRMPSC failuresmsdes: $DGBLSC failuresmsget: $MGBLSC failuresmsget: sga already mappedsmsfre: $CRETVA failuresmsfre: sga not mappedsmpall: $EXPREG failuresmpdal: $DELTVA failuresmcacx: $EXPREG failuresmsrcx: $DELTVA failuresmsdbp: illegal protection valuesmsdbp: $CRETVA failuresmsdbp: $SETPRT failure Ja @usmsdbp: $MGBLSC failuresmsdbp: buffer protect option not specified when sga createdsmsget: SGA pad area not large enough for created SGAsmscre: SGA pad area not large enough (%s bytes required)smsget: SGA not yet valid. Initialization in progresssmscre: Unable to use the system pagefile for the SGAsmprtset: $CMKRNL failuresmsalo: SMSVAR is invalidsszfsl: $CHANGE_CLASS failuresszfck: $CREATE failuresszfck: $OPEN failure D]u'Xsigunc: $GETJPIW failureslsprom:$TRNLOG failureslsprom:$GETDVI failureslsprom:$ASSIGN failureslsprom:$QIOW read failuressrexhd: recursive exception encountered %s %s %s %s %s %s$IDTOASC failed translating a secrecy category$IDTOASC failed translating an integrity category$PARSE_CLASS failed translating the string into a binary labelsou2os: another call to ORACLE currently executing J}Qysou2os: An error occurred while initializing Oraclesou2os: set kernel dispatch fail errsou2os: $SETPRV reset errorsou2os: supervisor stack reset errorsou2os: supervisor stack set errorsksarch: interrupt receivedsksatln: internal exception: output buffer too smallunrecognized device type in archive texterror in archive text: need '/' after device typeerror in archive text: need ':' after device namesksaprs: device name buffer too small >h!#M$%error in archive text: need disk file nameerror in archive text: need tape label namesksaprs: tape label name buffer too smallsksaprs: archiving to a remote host is not allowedsksaprs: file name buffer too smallsksamtd: could not mount archival device (SYS$MOUNT failure)sksadtd: could not dismount archival device (SYS$DISMNT failure)sksachk: invalid device specification for ARCHIVEsksaalo: error allocating memory &V)s<=>?@/AXBnCFGIsksafre: error freeing memoryscgcm: not enough OS resource to obtain system enqueueslemop: incorrect handle size (programming error)slemop: $OPEN failureslemop: $CONNECT failureslemop: incorrect error file attributesslemcl: invalid error message file handleslemcl: $CLOSE failureslemrd: invalid error message file handleslemrd: $READ failureslemcr: fopen failureslemcr: malloc failureslemcf: fseek before write failureJ\KrLMNOPxyz2{e|slemcf: fwrite failureslemcf: fseek before read failureslemcf: fread failureslemcc: invalid handleslemcw: invalid handleslemtr: invalid destinationslemtr: $open failureslbtpd: invalid numberslbtpd: invalid exponentslbtpd: overflow while converting to packed decimalslpdtb: invalid packed decimal nibbleslpdtb: number too large for supplied buffersspscn: SYS$CRELNM failuresspsdn: SYS$DELLNM failureb|.Ic}sspscm: SYS$CREMBX failuresspsqr: $QIO failuresspain: $SETIMR failuresspsck: $QIO failure at AST levelsspscm: SYS$GETDVIW failuresllfop: LIB$GET_VM failuresllfop: SYS$OPEN failuresllfcl: SYS$CLOSE failuresllfcl: LIB$FREE_VM failuresllfop: LIB$GET_VM failuresllfcl: LIB$FREE_VM failuesllfop: %s byte record too big for %s byte user buffersllfop: $CONNECT failuresllfrb: $GET failuresllfsk: $GET failure DV@ABJCDsllfop: bad optionosnsoi: error setting up interrupt handlersfqio: cannot write to file opened in read-only modesfqio: cannot expand the filesdopnf: internal errormaximum number of session sequence lists exceededmaximum number of sequences per session exceededsequence %s.CURRVAL is not yet defined in this sessionsequence %s.NEXTVAL exceeds internal limitssequence %s.NEXTVAL %s %sVALUE and cannot be instantiated EDF`H~AXspecified row does not existspecified row no longer existsanother instance is mounted with USE_ROW_ENQUEUES = %sindex is not valid - see trace file for diagnosticsindex key does not exist root dba %s, dba %s (%s)index key not found, obj# %s, dba %s (%s)object no longer existsdiscrete transaction restriction violated (%s)consistent read failure; rollback data not availablecan't serialize access for this transaction  J d  $ P r  scggc: failed to open lockscggc: failed to convert lockscgcc: failed to close lockscgcan: failed to cancel a pending convert requestscgcm: unexpected lock manager return codeora_addr: $ORACLE_SID not set in environmentora_addr: cannot translate address file nameora_addr: cannot open address fileora_addr: cannot read from address filescngrs: SCN not yet initializedRequested I/O error  P       0 V o  sfgcwd: Current working directory could not be obtainedsfphys: Cannot translate filenamesfphys: Cannot stat filenamesfccf: SID too longsfccf: Invalid logical block sizesfccf: Cannot translate filenamesfccf: Cannot reuse filesfccf: Cannot create file; file existssfccf: Cannot create filesfccf: Create for reuse failedsfccf: Internal error; illegal use optionsfccf: Cannot fstat file  V ! " # $ % & 2' P( o) * + sfccf: Invalid file size when creating for reusesfccf: Invalid logical block sizesfccf: Cannot ftruncate filesfccf: Erase failedsfifi: Cannot translate filenamesfifi: Cannot stat filenamesfifi: Invalid logical block sizesmscre: failed to allocate SGAsmscre: unable to attach to SGAsmsdes: cannot detach from SGAsmsdes: cannot unmap SGAsmsget: cannot get instance listener addresssmsget: listener not on this node , D- n. 0 1 2 3 "4 @5 o6 smsget: cannot share subcube with listenersmsget: SGA region not yet createdsmsfre: cannot detach from SGAsnlmatt: parallel server name too longsnlmatt: cannot attach to lock managersnlmdet: cannot detach from lock managersoarch: cannot open nameserversoarch: cannot open online log file for readingsoarch: cannot create archive destination filesoarch: cannot open archive destination file for write 7 P8 x9 : ; D E F <G [H I J soarch: cannot connect to archive serversoarch: archive server failuresoarch: failed sending piece to serversoarch: ORACLE_PSRV undefinedsoarch: archival interuptedora_addr: cannot open nameserverora_addr: cannot find name in nameserverora_addr: ORACLE_PSRV undefinedora_addr: cannot free listener addressora_addr: cannot close nameservercreate_ora_addr: cannot open nameservercreate_ora_addr: cannot register name in nameserver K JL sM N O P &R eS T U V destroy_ora_addr: cannot close nameservercreate_ora_addr: cannot close nameserverdestroy_ora_addr: cannot destroy namesoachk: Illegal archival control stringsoabln: Buffer size not large enough for archive control stringsoarch: Buffer size not large enough for archive control stringOut of memory for environment variableEnvironment variable unsetNo room in nameserver for pidCannot set environment variableCannot get CPU statistics W PY sZ [ \ ] ^ _ ,` Sa zb c sfsrd: Cannot seek to read locationsfofi: Cannot open filesfcfi: Cannot close filesfrfb: Invalid block number; internal errorsfrfb: Buffer is unaligned; internal errorsfrfb: Cannot seek to read locationsfrfb: Read failedsfcmf: Cannot translate target filenamesfcmf: Cannot translate source filenamesfcopy: Files have different block sizessfcopy: Cannot malloc buffer for copysfcopy: Read failed while copying d Ve xf g h i j k ,l Nm qn o p sfcopy: Write failed while copyingsfnfy: ulimit failedsfsrd: Invalid block number; internal errorsfsrd: Read is too largesfsrd: Read failedsfsrd: read returned incorrect number of bytessfsync: Gigacache sync failedsfsync: Gigacache file sync failedsfq_clean1: Asynchronous I/O failedsfdone: Asynchronous I/O failedsfqio: internal errorsfqio: Cannot malloc asynchronous I/O vectorsfqio: Invalid block number; internal error q Vr s t u v w x =y cz { | } sfqio: Buffer is unaligned; internal errorsfqio: Cannot set I/O control flagssfqio: Cannot issue asynchronous I/O requestsllfop: Cannot open filesllfop: Cannot fstat filesllfop: Bad value for recsizesllfop: bad value for maxrecsizesllfop: unrecognized processing optionsllfop: could not allocate bufferssllfcf: Error closing filesllfrb: Error reading filesllfsk: Error seeking in file.sllfsk: Error seeking in file. ~ J d ~  ' ? k sllfsk: Error reading filesllfsk: Error reading filescnget: Call to scnget before scnset or scnfnd.scnmin: NOT IMPLEMENTED YETscnmin: open/convert of bias lock failedscnmin: close of bias lock failedPrinting not supportedWait operation timed outrollback segment #%s specified not availableThis command not allowed on nCUBE, only one thread is ever used.On nCUBE, this command can only be executed from instance 1. D s  7 P  sropen: failed to open a redo server connectionsrclose: failed to close a redo server connectionsrapp: failed to send redo data to the redo serversfccf: Illegal file type.sfccf: No space left on raw device.scgcm: Out of memory in lock manager.invalid compiler name: %serror encountered in WMSGBSIZ, size for WMSGBLK is not big enough for warning messageinvalid compiler type in FORMAT parameter at %serror encountered in %s D s  2 v  raw data has invalid digit in display type dataraw data missing leading signraw data missing zero as defined in pictureraw data has invalid floating point datainvalid picture type in convert raw to numberraw data has invalid trailing signPICTURE MASK missing the leading sign when SIGN IS LEADING specifiedraw data has invalid sign digitinvalid picture type in picture maskraw buffer is too short to hold converted data > h ,!X!!closed parenthesis missing in picture masksyntax error in BLANK WHEN ZERO clause in mask optionssyntax error in JUSTIFIED clause in mask optionssyntax error in SIGN clause in mask optionssyntax error in SYNCHRONIZED clause in mask optionssyntax error in USAGE clause in mask optionssyntax error in DECIMAL-POINT environment clauseinvalid numeric symbol found in picture maskinvalid specification of CR in picture mask !>!i!!!!* !a ! !invalid specification of DB in picture maskspecification of E in picture mask is unsupportedmore than one V symbol specified in picture maskmore than one S symbol specified in picture masksyntax error in CURRENCY SIGN environment clauseno sign in picture mask but SIGN clause in mask optionssyntax error in SEPARATE CHARACTER option of SIGN clauseinvalid format parameterinvalid format parameter length !>!q!!!!*!R!v2!invalid environment clause in environment parameterraw buffer contains invalid decimal dataoverflow converting decimal number to Oracle numberinput raw decimal data contains more than 42 digitsinput mask contains more than 32 charactersraw buffer length %s is too short for %serror converting Oracle number to %smask option %s is not supportedWarning: picture mask '%s' overrides picture mask option 'USAGE IS %s' to 'USAGE IS DISPLAY' 3!D%y%%%%#%W%%%Warning: picture mask options '%s' ignored by UTL_PG sclin: maximum number of latches exceededscnfy: maximum number of processes exceededsem_acquire: cannot acquire latch semaphoresem_release: cannot release latch semaphoresstascre: ftok error in creating test and set pages.spcre: cannot initialize latch semaphoreslsget: get_process_stats error.sfccf: maximum length of ORACLE_SID exceededsoacon: failed to bind socket to port. %J%p%%%%%!%=%i%%soacon: failed to accept a connection.soarcv: buffer overflow.orasrv: archmon already connected.orasrv: log archiver already connected.soadum: cannot do log archiving to tape.Two Task interface: cannot obtain punameorasrv: cannot obtain punamekslcll: Unable to fix in-flux lamport latch.osnsui: maximum number of user interrupt handlers exceeded.osnsui: cannot set up user interrupt handler.osncui: invalid handle. &J &~&&&&&9&h&&&slsget: cannot get virtual memory region statistics.spwat: error waiting for a post.sppst: error during a post.smscre: could not attach shared memory.smsget: mmap returned an error.smscre: vm_allocate error, unable to create shared memory.smscre: shared memory attach address incorrect.pw_detachPorts: server call pws_detach failed.pws_look_up: fork failedpws_look_up: port lookup failurepw_attachPorts: port_rename failed. &J&x&&&& &,&L&x &!&pw_attachPorts: server call pws_attach failed.pw_attachPorts: port_allocate failed.spwat: invalid process number.sppst: invalid process number passed to sppst.osngpn: port allocation failure.osnpns: no port in the name server.osnipn: port allocation failure.osnipn: could not check port in name server.osnsbt: bad message received.osnpui: cannot send break messagepw_destroyPorts: server call pws_stop_instance failed. "&J#&p$&%&&&'&(&%)&I*&j+&,&sNeXT_instanceName: translation error.osnmpx: send/receive error exchanging Mach ports.osnmop: access error on oracle executableosnmop: fork failedosnmop: buffer allocation failure.osnmfs: bad return code from msg_send.osnmgetmsg: could not read a messageosnmbr: cannot send break messagepws_look_up: translation failure.osnmwrtbrkmsg: bad return code from msg_send.osnpmetbrkmsg: message from host had incorrect message type -&>.&y/&0&1&2&3&=4&d5&osnmgetdatmsg: message from host had incorrect message typeosnmui: cannot send break messageosnmrs: reset protocol errorpws_look_up: access error on (Oracle helper) executableosnpbr: cannot send break messagesnynfyport: failure allocating the notify port.snyGetPort: failure to allocate a port.sfifi: translation error, unable to expand instance name.sfifi: bad instance name stored in control file. 6&>7&t8&9&:&';&O<&=&>&sfifi: another instance has the same database mounted.sfifi: Cannot determine if another instance has mounted the same database.sfifi: lseek error, unable to seek to beginning of file.sfifi: write error, unable to write header block.sllfop: open error, unable to open file.sllfop: unrecognizable processing option, incorrect format.sllfrb: unable to read file.sllfsk: unable to read file.sllfcf: unable to close file. ?&D@&A&B&C&D&:E&_F&G&H&slembdf: translation error, unable to translate error file name.sllfop: cannot allocate read buffer.szguns: length of user name is greater than buffer.szrbuild: length of role name is greater than buffer.szrbuild: malloc of role structure failed.szrbuild: malloc of role name failed.Failed to get O/S MAC privileges.Label comparison failed.File label retrieval failed.Process sensitivity label retrieval failed. I&DJ&iK&L&M&N&O&>P&oQ&R&Unable to get user ID from connectionConversion of binary label to string failed.Allocation of string buffer failed.Class conversion from binary to ORACLE failed.conversion of category number to string failed.Allocation of label string buffer failed.Conversion of label from string to binary failed.Could not obtain user clearance.Unable to get user's group ID from connectionUnable to get process ID from connection S&VT&sU&V&W&X&Y&Z&-[&@\&b]&^&_&Unable to initialize package.Unable to get user clearance from connectionUnable to get directory statusUnable to expand file nameFile name buffer overflowUnable to set effective privilegesWrite to audit file failed.Number is too largeNumber exceeds maximum legal valueConversion of class string to numeric representation failed.Numeric label is not validTranslation of audit file name failed.device name is too long `&Da&nb&c&d&e& f&?g&uh&i&Unable to enable allowmacaccess privilege.Unable to disable allowmacaccess privilege.SCLIN: cannot initialize atomic latch.SCLGT: atomic latch return unknown error.SCLFR: atomic latch return error.pw_createPorts: server call pws_start_instance failed.snyAddPort: failed to perform a remote procedure call.snyStartThread: failed to build the server port set.infoCallback: bad message format.addCallback: bad message format. j&>k&nl&m&n&o&:p&sq&r&snyGetPortSet: failed to collect info on a port.addCallback: callback port is already in a set.addCallback: could not add a port to the callback set.addCallback: could not add allocate a callback link.removeCallback: failure removing the callback port.removeCallback: callback port is not in the callback set.soacon: Name translation failure.soacon: Name translation failure.soacon: Archmon unable to create named pipe. s&Dt&pu&v&w&x&y&8z&_{&|&soacon: Archmon unable to create named pipe.soacon: Archmon unable to open named pipe.soacon: Archmon unable to open named pipe.soacon: ARCH unable to open named pipe.soacon: ARCH unable to open named pipe.soawrt: Unable to write to named pipe.soarcv: Unable to read from named pipe.soacon: Archmon unable to lock named pipe.soacon: Archmon unable to lock named pipe.sfgcwd: failed to get the name of the current directory.}&8~&d&&&&&H&snyRemovePort: bad return code from request.snyPortInfo: bad return code from request.removeCallback: bad message format.smpalo: vm_allocate error while allocating pga.smprset: vm_protect error while protecting pga.spini: failure initializing maximum number of open files.TASDEF_NAME: translation error while expanding ?/dbs/tasdef@.dbf.TASDEF_CREATE: create failure in creating ?/dbs/tasdef@.dbf.&2&h&&&&R&TASDEF_OPEN: open error when opening tasdef@.dbf file.TASDEF_READ: read error, unable to read tasdef@.dbf file.TASDEF_WRITE: write error when writing ?/dbs/tasdef@.dbf file.TASDEF_CLOSE: unable to close ?/dbs/tasdef@.dbf file.sstascre: shmget error, unable to get a shared memory segment.sstascre/sstasat: shmat error, unable to attach tas write pagesstascre/sstasat: shmat error, unable to attach tas read page&8&w&&&!&Q&u&sstasfre/sstasdel: shmdt error, unable to detach tas write pagesstasfre/sstasdel: shmdt error, unable to detach tas read pagesstasfre/sstasdel: shmctl error, unable to remove tas shm pageTwo Task interface: oratab file does not existTwo Task interface: SID doens't match current PUosnTXtt: cannot create TXIPC channelosnTXtt: translation error while expanding txipc@.trc.osnTXtt: Failed to create/open debug channel. &D&j&&&&& &>&t&osnTXtt: txipc channel creation failedosnTXtt: access error on oracle executableosnTXtt: malloc failedsfwrt: Unable to initialize Async Write.sfaswr: seals do not match.sfaswr: invalid block number.sfaswr: write error, unable to write database block.sfalck: setitimer error, unable to set interval timer.sfapol: write error, unable to poll async write.sfapol: write error, unable to poll async write. &J&~&&&& &9&h&&&sfapol: write error, unable to write database block.sfapol: write returned incorrect number of bytes.sfwrt: Internal error.sfotf: temporary file directory name is too longsfotf: mktemp() failedsfotf: open of the temporary sort file failed.sfotf: unlink of the temporary sort file failedslkmnm: gethostname returned error code.Malloc of scratch buffer failed.Unable to find ORACLE password file entry for user.Incorrect user password. &D&d&&&&&&@&g&Malloc of name buffer(s) failed.Malloc of dummy name failed.Unable to open the ORACLE password file.Password encryption failed.Required password was not specified.DBA group does not exist in system groups file.Unable to get user privileges from SQL*NetUnable to set label of dedicated serverUnable to get sensitivity label from connectionUnable to get information label from connection &D&&&&#&V&s&&&Can't spawn process - background log directory not created properlyCan't spawn process - user log directory not created properlyCan't spawn process - core dump directory not created properlyUnable to create audit trail fileUnable to set effective privilege set of the serverUnable to set label of serverUnable to restore the label of serverGLB of two labels is invalidLUB of two labels is invalidUnable to open ORACLE password file for reading &D&i&&&&&4&S&y&Close of ORACLE password file failed.Deletion of old password file failed.Link of current password file to old failed.Unlink of current password file failed.Open of ORACLE password file for write failed.Chmod of ORACLE password file failed.Save of signal handlers failed.Restoration of signal handlers failed.ORACLE password file header is corruptVersion of orapasswd or installer is older than file. &D&p&&&&&:&e&&Write of ORACLE password file header failed.Allocation of memory for password list component failed.Password entry is corrupt.Unable to initialize the audit trail fileFile name too long for bufferUnable to allocate connection attributes structureProcess information label retrieval failed.Unable to get client operating system privilegesUnable to get server operating system privilegesUnable to create file &>&t&&&&6&`&&scgcmn: lk_open_convert unexpected return: open failedscggc: unexpected return of a lock convertscgcc: unexpected return status to callback of lock closescgcan: unexpected return status when canceling a lockscgcm: unexpected lock status conditionUnable to send termination request to IMONIMON: two processes with the same ORACLE pid are activeIMON: deletion of a process failed.Unable to establish signal handler for termination signal &J&v&&&&&&>&h&&Unable to restore termination signal handlerlk_group_create error in scggrclk_group_attach error in scggralk_group_detach error in scggrdsfsfs: invalid file size.sfsfs: unable to open file in read/write modesfsfs: unable to resize a file largersfsfs: unable to seek to beginning of filesfsfs, sfrfs: malloc error, unable to allocate buffer.sfsfs: read error, unable to read header block.sfsfs: write error, unable to write header block. &D&j&}&&&&&<&r&sfsfs: unable to resize a file smallersfsfs: close error.skxfidini: Error Initializing SDI Channelkxfspini: Error Initializing SDI Processskxfqdini: Error Creating Portskxfqhini: Error Connectingskxfqhdel: Error Disconnecting from another endpoint.skxfqhsnd: Error Sending a message to another endpointskxfqdrcv: Error Receiving a message from another endpointskxfqdreg: Error Adding a page to the SDI buffer pool &D&}''' '='f'''skxfqddrg: Error Removing a page from the SDI buffer poolskxfidsht: Error shutting down SDI channelSGA file $ORACLE_HOME/dbs/sgadef$ORACLE_SID.dbf does not existSGA definition file could not be readwrong number of bytes read from SGA definition fileunable to attach to SGA in READ-ONLY modeerror while detaching SGAattempt to use invalid skgmsdef struct pointercontrol file debug event, name 'control_file'control file crash event1 'V'o''''''V'''''control file crash event2control file crash event3control file crash event4trace latch operations for debuggingtesting - block recovery forcedlog switch debug crash after new log select, thread %slog switch debug crash after new log header write, thread %slog switch debug crash after old log header write, thread %sBegin TransactionEnd TransactionAbort TransactionInstance RecoveryRoll Back to Save Point'h '}!'"'#'$'%'&'''$('<)'N*'f+'u,'-'.'Undo Segment RecoveryUndo Segment extendUndo Segment WrapData Segment CreateData Segment Recoverypartial link restored to linked list (KSG)latch cleanup for state objects (KSS)trace ktsgspCreate Save Undo SegmentWrite to Save UndoExtend Save Undo SegmentApply Save Undolatch cleanup for enqueue locks (KSQ)latch cleanup for enqueue resources (KSQ)session logon (KSU)session logoff (KSU)/'\0'w1'3'4'5'6'7'8'-9'=:'V;'x<'='row source debug event (R*)sort end (SOR*)sort run (SRD*/SRS*)parse SQL statement (OPIPRS)create remote row source (QKANET)allocate remote row source (QKARWS)dump row source tree (QBADRV)type checking (OPITCA)dirty cache listdump undo records skippedtrap error during undo applicationcheck consistency of owner/waiter/converter lists in KSQfree list undo operationsfree list update operations - ktsrsp, ktsunl>'b?'}@'A'B'C'D'E'F'G'/H'AI'YJ'~K'L'enable SQL statement timingtrace switching of sessionsUndo segment shrinkprotect library cache memory heapssniper tracetrace OPI callsdon't clean up obj$CBO Enable optimizer tracetrace UNDO handling in MLStrace UNDO handingdump analyze stats (kdg)suppress file names in error messagesuse table scan cost in tab$.spare1simulate error in logfile create/clearCBO Enable predicate dump M'DN'kO'P'Q'R'#S'BT'oU'V'disable SMON from cleaning temp segmentdisable usage of OS Roles in osdsdisable usage of DBA and OPER privileges in osdsthread enable debug crash level %s, thread %slimit library cache dump information for state object dumpsimulate failure to verify fileforce redo log checksum errors - block numberforce redo log checksum errors - file numberTrusted Oracle test eventforce datafile checksum errors - block number W'DX'pY'Z'['\' ]'2^'g_'`'force datafile checksum errors - file numberprotect latch recovery memoryhave PMON dump info before latch cleanupdefault trace function mask for kstCBO Disable outer-join to regular join conversionCBO Enable cartesian product join costingCBO Disable view-merging optimization for outer-joinsCBO Disable constant predicate elimination optimizationtrace data sent/received via SQL*Netdump a block on a segment list which cannot be exchanged a'Jb'sc'd'e'f'g'Eh'pi'j'k'segment High Water Mark has been advancedfree list head block is the same as the last blocka brand new block has been requested from space managementfree list becomes emptyfree lists have been mergedCBO Enable error if kko and qka disagree on oby sortdisable repair of media corrupt data blocksCBO Disable new NOT IN optimizationCBO Disable index sortinginvoke other events before crash recoveryCBO Disable constant predicate merging l'Jm'_n'zo'p'q'r's'Qt'u'v'CBO Disable hash joinCBO Enable force hash joinsbefore resizing a data filedump debugger commands to trace fileafter the cross instance call when resizing a data fileafter generating redo when resizing a data fileafter the OS has increased the size of a data fileafter updating the file header with the new file sizeafter the OS has decreased the size of a data fileatomic redo write recoveryswitch off anti-joins w'Px'ny'z'{'|'}'6~'\'{'''CBO Disable hash join swappingdump hash join statistics to trace fileCBO Enable constant pred trans and MPs w WHERE-clauseCBO Disable evaluating correlation pred last for NOT INCBO Always use bitmap indexCBO Don't use bitmap indexCBO Disable move of negated predicatesCBO Try index rowid range scansBitmap index creation switchBitmap index creation switchBitmap index creation switchBitmap index creation switch 'V''''''#'?'p''''CBO Bitmap optimization use maximal expressionCBO Bitmap optimization switchCBO Disable new parallel cost model CBO Enable hash join costing QKA Disable GBY sort eliminationCBO Disable index fast full scanCBO Don't sort bitmap chainsCBO disable count(col) => count(*) transformationQKA Disable Bitmap And-EQualstest auditing network errorsenable Oracle TRACE collectionblock cleanoutconsistent read undo application'\'x''''' '%'K'e''''consistent read block headerconsistent read buffer statussignal recursive extendrow cache debuggingtransaction table consistent readconsistent read transactions' status reportconsistent read loop checkenable simulated error on control filecheck data block integritycheck index block integritycheck cluster integritycrash after control file writesimulate write errors on control filesimulate read errors on control file 'V'n'''''''1'O'i''dump control file headerdebug sequence numbersdump uba of applied undomonitor multi-pass row lockingshow updates to the transaction tableshow changes done with undorow cachetransaction layer - turn on verification codesindex block split/delete tracefree/used extent row cachetrace CR applications of undo for data operationsverify (multi-piece) row structuretrace application of redo by kcocbk 'J'n'''''S'{'''simulate I/O error against datafilescheck redo generation by copying before applyingskip corrupted blocks on _table_scans_dump corrupted blocks symbolically when kcbgottenskip corrupted blocks on index operationstrigger event after calling kcrapc to do redo N timescheck memory manager internal structureslibrary cache managersimulate ^C (for testing purposes)instantiation managermulti-instance library cache manager (D(i((( (@(m(( (dump dba's of blocks that we wait fordump SQL generated for remote execution (OPIX)suppress OER 2063 (for testing distrib w/o different error log)simulated error for test %s of K2GTAB latch cleanupmake tranids in error msgs print as 0.0.0 (for testing)simulate lock conflict error for testing PMONprint trace of PMON actions to trace fileTurn on scgcmn tracing. (VMS ONLY)turn on tracing for dispatchersturn on tracing for multi-stated servers (D (} ( (((()(V((Trace all allocate and free calls to the topmost SGA heapcheck consistency of transaction table and undo blocksimulate write error to data file headersimulate write error to redo logtrace cross-instance callspl/sql parse checkingturn off multi-threaded server load balancingtrace multi-threaded server load balancingforce shared servers to be chosen round-robinget error message text from remote using explicit call (P(q(((((7(L(f(((Trace calls to SMPRSET (VMS ONLY)Limit the size of the PGA heapDon't check for memory leaksDon't free empty PGA heap extentsCollect statistics on context area usage (x$ksmcx)Keep random system generated output out of error messagesTrace OSD stack usageInhibit KSEDMP for testingDon't do forward coalesce when deleting extentsDon't do coalesces of free space in SMONDebug shared cursorsdistributed transaction after COLLECT (J!(p"(#($(%()(;*(d.(/(0(distributed transaction before PREPAREdistributed transaction after PREPAREdistributed transaction before COMMITdistributed transaction after COMMITdistributed transaction before FORGETCursor sharing (or not) related event (used for testing)maximum time to wait for process creationInhibit signalling of other backgrounds when one diesSimulate control file open errorSimulate archiver errorDo not check block type in ktrget 1(>2(w3(4(5(6(/<(h=(P(Do block dumps to trace file in hex rather than fromattedkdnchk - checkvalid event - not for general purpose use.die in dtsdrv to test controlfile undodump uet entries on a 1561 from dtsdrvdump debugging information when doing block recoveryenable PERSISTENT DLM operations on non-compliant systemsdisable undo compatibility check at database openEnable LCK timeout table consistency checkEnable data layer (kdtgrs) tracing of space management calls p(Pq(mr(|s(t(u(((I(n(((report direct path statisticsnumber of slotsturn on direct read path for parallel queryturn on direct read path for scansturn on hint usage for direct readturn on debug information for direct pathparallel query server interrupt (validate lock value)turn on checks for statistics rollupsturn on table queue statisticsturn off load balancingforce hard process/range affinitydirect read for rowid range scans (unimplemented) (J(j((((((E(m((kxfp latch cleanup testing eventkxfp latch cleanup testing eventparallel query server interrupt (reset)auto parallelization testing eventparallel dataflow scheduler tracingparallel table scan range sampling methodparallel SQL hash and range statisticsparallel query server interrupt (normal)parallel query server interrupt (failure)parallel query server interrupt (cleanup)Trace parallel query slave execution (J(h((((((P(y()trace rowid range partitioningparallel query debugging bitsprint parallel query statisticsallow parallelization of small tablesadjust sample size for range table queuescircumvent range table queues for queriessuppress verbose parallel coordinator error reportingenable timeouts in parallel query threadsuse different internal maximum buffer sizeturn on system state dumps for shutdown debuggingturn on traces for SMON )>)})6)h)j)5k)el)m)turn off SMON check to offline pending offline rollback segmentturn off SMON check to cleanup undo dictionaryturn off SMON check to shrink rollback segmentssignal error during create as select/create index after n rowscheck cursor frame allocationcause an access violation (for testing purposes)cause an error to occur during truncate (for testing purposes)trace parallel create indexenable parallel create index by default n)Jo)ep)r)))) )=)n))trace parallel create indextrace index rowid partition scantrace create bitmap indextrace create index pseudo optimizerDo not get database enqueue nameCause sppst to check for valid process idsSet shadow process core file dump type (Unix only)Set background process core file type (Unix only)Alter access violation exception handlerDump direct loader index keysEnable histogram data generation )D)m))))G))))Simulate process death during enqueue getPrint out information about what enqueues are being obtainedPrint Out Tracing information for every I/O done by ODSsPrint out information about instance lock manipulationSimulate process death for instance registrationPrint out Tracing information for skxf multi instance commsenable parallel instances in create index by defaulttrace bitmap index accesstrace bitmap index mergetrace bitmap index or)\)r))0*1*2*3*4*H5*Y*u***trace bitmap index andtrace bitmap index minustrace bitmap index conversion to rowidstrace bitmap index compress/decompressdisable Smart Disk scanenable Smart Disk tracereserved for Smart Diskwrite timing statistics on OPS recovery scanreserved for ksxbreserved for row source sortextent manager fault insertion event #%simport storage parse error ignore eventtrace name context forevertrace name context forever *J*d*~....".>.Y..trace name context forevertrace name context foreverdo not get database enqueue namea snapshot log already exists on table '%s'cannot create log: table '%s' already has a triggerthere is no snapshot log on table '%s'snapshot '%s' does not existREFRESH FAST cannot be usedmay not schedule automatic refresh for times in the pasta snapshot with the same user.name already existssnapshot reuse parameters are inconsistent .P.n....v/:w/Qx/y/z/{/error in snapshot refresh pathsnapshots may not contain long columnscannot create snapshot log on table owned by SYSexecution of %s jobs failederror on auto execute of job %supdatable snapshots must be simple enough to do fast refreshTNS:unable to send dataTNS:received bad packet type from network layerTNS:unable to send break messageTNS:not connectedTNS:could not resolve service nameTNS:received bad datatype in NSWMARKER packet |/J}/v~//// /3/\/~//TNS:tried to reset line from incorrect stateTNS:internal network communication errorTNS:could not initialize parameter subsystemTNS:trace file not writeableTNS:internal error: Bad error numberTNS:internal error: partial data receivedTNS:service name is incorrectly specifiedTNS:connect descriptor is too longTNS:received an error from TNSTNS:keyword-value resolution errorTNS:could not find path to destination /J/g/////$/N/n//TNS:could not allocate memoryTNS:encountered too small a connection bufferTNS:internal navigation errorTNS:unable to connect to destinationTNS:received data refused from an applicationTNS:could not get failed addressesTNS:received a TNS error during navigationTNS:unable to perform navigationTNS:could not find the TNSNAV.ORA fileTNS:encountered uninitialized globalTNS:error in finding Navigator data/8/i/// /H//TNS:needs PREFERRED_CMANAGERS entry in TNSNAV.ORATNS:incomplete PREFERRED_CMANAGERS binding in TNSNAV.ORATNS:incomplete PREFERRED_CMANAGERS binding in TNSNAV.ORATNS:missing local communities entry in TNSNAV.ORATNS:poorly formed PREFERRED_NAVIGATORS Addresses in TNSNAV.ORATNS:poorly formed PREFERRED_CMANAGERS addresses in TNSNAV.ORATNS:could not contact PREFERRED_CMANAGERS in TNSNAV.ORATNS:unacceptable network configuration data /J///////=/M/n/TNS:missing community name from address in ADDRESS_LISTTNS:illegal ADDRESS parametersTNS:no such protocol adapterTNS:internal limit restriction exceededTNS:no listenerTNS:destination host unreachableTNS:operating system resource quota exceededTNS:syntax errorTNS:protocol adapter not loadableTNS:Interchange has no more free connectionsTNS:Severe Network error ocurred in making this connection 0>0|000!0""0]#0$0database link type is invalid for the ALTER DATABASE statementsyntax error in database link's connect stringlogon to database (link name %s) denieddatabase (link name %s) is already mounteddatabase (link name %s) is already opendatabase (link name %s) is not open and AUTO_MOUNTING=FALSEunable to mount database (link name %s)unable to open database (link name %s)cannot use the ROM: link type on a private database link &0>)0~-0.0/00050G60m90database %s is closing immediately; no operations are permitteddatabase %s is closed; no operations are permitteddatabase (link name %s) is not mounteddatabase (link name %s) is still opendatabase (link name %s) is not opencannot login to database (link name %s) maximum number of open mounts exceededopen mounts exceeds limit set on the OPEN_MOUNTS parameteruser %s lacks CREATE SESSION privilege in database link (linkname %s) >0D?0p@0A0B0 p0*q0Ur0s0t0database link being dropped is still mountedcannot create view using a remote object which has a remote object referenceobject %s.%s@%s is invalidsecondary stored object cannot reference remote objectsecondary object being droppedDBLOW is not a valid operating system labelDBHIGH is not a valid operating system labelfile: %sfile label (%s) must be equal to DBHIGH (%s)device low (%s) must be dominated by DBLOW (%s) u0Dv0nw0x0y0z04{0Z|0t}0~0device high (%s) must dominate DBHIGH (%s)must be at DBHIGH (%s) in OS to add files to a tablespacecannot insert or update the ROWLABEL column of a viewtablespace previously existed at another label (%s)DBLOW cannot be null in DBMS MAC modeDBHIGH cannot be null in DBMS MAC modeDBHIGH must dominate DBLOWCannot raise DBLOW above %sCannot lower DBHIGH below %smust be DBHIGH (%s) to startup database 0D0}0000090`00session label must dominate the creation label of role %slabel of audit must dominate userlabel of index must equal tablelabel of column must equal tablelabel of stored object must dominate referenced object %slabel of grant must dominate objectlabel of grant must dominate grantee %slabel of constraint must equal tablelabel of object must dominate tablespacelabel of table must dominate cluster 0D00000030_00label of user must dominate default or temporary tablespacelabel of object must dominate schemainsufficient MAC privilegeslabel of comment must equal table or viewlabel of trigger must equal tablelabel of user must dominate default profilelabel of grant must equal label of procedurelabel of default role %s must dominate userlabel of child record must dominate parentlabel of package body must equal package 0>0m0000)0R00package body must exist to grant MAC privilegescannot write down to a database at a lower labelinsufficient privileges to validate constraint on all rowscannot modify ROWLABEL columndatabase has not been mounted in read-compatible modegrant already exists at a different labelmust be at same label as user to modify default rolesaudit option already exists at a different labelfile label is lower than instance label 0>0g0000<0m00index/row label mismatch - see trace filefile label is higher than instance labelnon-secure protocol used; connection deniedgreatest lower bound resulted in an invalid operating system labelleast upper bound resulted in an invalid operating system labelinternal buffer overflow during label translationformat mask for TO_LABEL or TO_CHAR function is invaliderror initializing label contextbinary label could not be translated into a string 0>0{0000?0y00input string does not contain expected punctuation or literalinvalid internal format code foundduplicate format code specified in string to label conversioninvalid length for MLSLABEL bind variablethe input string could not be translated into a binary labelmaximum number of columns in a Trusted Oracle table is 253the value %s for the MLS_LABEL_FORMAT parameter is not validinvalid binary labelprocess label could not be found 0D0b00000$0[0|0cannot log in below DBLOW (%s)cannot log in above DBHIGH (%s)cannot insert label below DBLOW (%s)cannot insert label above DBHIGH (%s)secondary database changing between OS MAC and DBMS MAC modescannot find file label for %sinsufficient privileges to set label to DBHIGH or DBLOWsession label must be equal to %sinsufficient MAC privileges to alter your session labelcannot alter DBMS label below username creation label (%s)080s000090j0cannot change MAC mode when mounted in READ_COMPATIBLE modecannot mount secondary database labeled above DBLOWmulti-threaded server cannot be used with Trusted OracleTNS:listener failed to start a dedicated server processTNS:listener failed to spawn processTNS:listener received no CONNECT_DATA from clientTNS:listener was not given the SID in CONNECT_DATATNS:listener could not resolve SID given in connect descriptor020f000080uTNS:listener was not given the ALIAS in CONNECT_DATATNS:listener could not resolve ALIAS givenTNS:listener could not resolve the COMMAND givenTNS:listener failed to redirect client to service handlerTNS:database lacks resources to handle the request for this SIDTNS:service handler found but it is not accepting connectionsTNS:service handler found but it has not registered a redirect address0\00000 0"0;0P0l0000TNS:service handler found but it has registered for a different protocolTNS:cannot allocate memoryTNS:invalid argumentTNS:illegal ADDRESS parametersTNS:operation not supportedTNS:operation timed outTNS:operation would blockTNS:connection closedTNS:no such protocol adapterTNS:buffer over- or under-flowTNS:internal limit restriction exceededTNS:no listenerTNS:address already in useTNS:destination host unreachable1h1111111+1> 1[ 1p 1}1111TNS:contexts have different wait/test functionsTNS:name lookup failureTNS:permission deniedTNS:lost contactTNS:incomplete read or writeTNS:operating system resource quota exceededTNS:syntax errorTNS:missing keywordTNS:operation was interruptedTNS:permission deniedTNS:no callerTNS:protocol adapter not loadableTNS:protocol adapter errorTNS:unknown errorTNS:bad global handleTNS:connection refused1h1z111&1'1)1-1.11/1B01Z11h314151TNS:protocol errorTNS:packet checksum failureTNS:packet reader failureTNS:packet writer failureTNS:redirection deniedTNS:invalid operationTNS:no readerTNS:data truncationTNS:connection not bequeathableTNS:no I/O bufferTNS:event signal failureTNS:bad packetTNS:no registered connectionTNS:no confirmationTNS:internal inconsistencyTNS:connect descriptor already in use 61V71H1J1K1L1 N16O1aP1Q1R1T1U1TNS: operation failed due to error returned by native serviceTNS:cryptographic checksum mismatchTNS:no event signalsTNS:versions are incompatibleTNS:unable to grant requested serviceTNS:requested characteristic not availableTNS:event notifications are not homogeneousTNS:operation is illegal in this stateTNS:connection is already registeredTNS:missing argumentTNS:bad event typeTNS:no event callbacksTNS:no event test V1PW1zX1Y1Z1[1\1]1'^1@_1_`1a1TNS:native service operation not supportedTNS:name retrieval failedTNS:role fetch failedTNS:no shared authentication servicesTNS:memory allocation failedTNS:no authentication adapters availableTNS:packet send failedTNS:packet receive failedTNS:credential retrieval failedTNS:authentication service negotiation failedTNS:authentication service initialization failedTNS:authentication service failed to initialize b1Jc1\d1|e1f1g1h1i1Jj1|k1l1TNS:no session keyTNS:process communication failedTNS:authentication service initialization failedTNS:parameter does not exist.TNS:invalid value specified for boolean parameterTNS:authentication requiredTNS:encryption or data integrity algorithm list emptyTNS:unknown encryption or data integrity algorithmTNS:no common encryption or data integrity algorithmTNS:encryption or data integrity algorithm unacceptableTNS:string truncated m1Jn1to1p1q1r1s1*1O1p11TNS:authentication control function failedTNS:authentication conversion failedTNS:password check failedTNS:cryptographic checksum mismatchTNS:no algorithms installedTNS:native service required but TNS version is incompatibleTNS:error received from other processTNS:native service internal errorinvalid NLS parameter value (%s)CREATE DATABASE character set is not knowninvalid NLS parameter string used in SQL function 1>1l111152f22this character set conversion is not supportedinvalid or unknown NLS parameter value specifiedthis CREATE DATABASE character set is not allowederror while getting create database NLS parameter %serror while loading create database NLS parameter %serror while loading create database character setsystem appears too busy for parallel query executionerror signaled in parallel query server %sparallel query server lost contact with coordinator282n2222% 2` 2parallel query server lost contact with another serverparallel query server appears to have diedparallel query server died unexpectedlycould not get background process to hold enqueueprocess queue could not receive parallel query messagecannot set %s_INSTANCES greater than number of instances %scannot set %s_INSTANCES when mounted in exclusive modePARALLEL_MAX_SERVERS must be less than or equal to %s 2D 2 222*2T2|222PARALLEL_MIN_SERVERS must be less than or equal to PARALLEL_MAX_SERVERS, %sonly one PARALLEL or NOPARALLEL clause may be specifiedvalue for PARALLEL or DEGREE must be greater than 0only one CACHE or NOCACHE clause may be specifiedvalue for INSTANCES must be greater than 0parallel create index fastpath operationparallel query option must be enabledinvalid option in PARALLEL clausemissing options in PARALLEL clauseinvalid value for DEGREE 2J2e22222D2p222invalid value for INSTANCESduplicate option in PARALLEL clausedefault degree of parallelism may not be specified hereINSTANCES DEFAULT may not be specified hereexplicit degree of parallelism must be specified herehung parallel query server was killedinsufficient parallel query slaves availabledimension number is out of rangedimensions mismatch errorspecified level is out of rangethe specified range for a dimension is invalid 2D2h22222&2W2l2the specified buffer size is invalidrecursive HHCODE function errorthe specified cell number is invalidan invalid HEX character was detectedthe specified date format has an invalid componentthe specified date string is invalidan invalid number of arguments has been specifiedvalue is out of rangean invalid window type was specifedthe specified topology was not INTERIOR or BOUNDARY 2J2222,3-3.39/3d0313a topology identifier outside the range of 1 to 8 was specifiedthe window definition is not validbad partition definitionunrecognized line partition shapebad distance typebadly formed request framepartition name datatype should be varchar2reply pipe name datatype should be varchar2failed to acknowledge on pipe %s due to timeoutfailed to send reply on pipe %s due to timeoutbuffer overflow encountered on pipe %s 23V33{435363738393-:3L;3c<3=3>3acknowledgment on pipe %s interruptedreply on pipe %s interruptedspatial table %s not foundspatial table %s existsspatial table %s is not partitionedspatial table %s has no partition key definedinvalid count mode %sOracle table %s does not existstablespace %s not foundtablespace %s is already allocatedtablespace %s is not allocated to table %spartition %s not foundpartition %s is offline ?3P@3{A3B3C3D3E3!F3=G3kH3I3J3source and target tablespaces are identicalSD*POD is not listening on pipe %sfailed to create child partitionchild partition %s not foundcolumn %s is already definedunable to determine columnd id for column %spartition key is already setunable to determine class for spatial table %sfailed to generate target partitionfailed to identify dimensions for column %sHHCODE column %s not foundtimed out waiting for reply on %sK3\L3xM3N3O3P3R3S3T3AU3TV3sW3X3Y3record in pipe %s is too bigpipe read on %s was interruptedarchive request failedrestore request failedduplicate offline pathnull common code generatedcould not determine name of object %scould not obtain column definition for %sinvalid target typeinvalid RANGE window definitioninvalid PROXIMITY window definitioninvalid POLYGON window definitiontarget table %s not foundfailed to generate range list Z3P[3}\3]3^3`3 3 39NW NtRv[could not find table substitution variable %sfailed to generate MBRfailed to generate SQL filterfailed to generate next sequence number for spatial table %sfailed to insert exception recordinvalid HHCODE typeonly MDSYS can execute %sOracle error ORA%s encounteredskip_row procedure was called%serror number argument to raise_application_error of %s%s is out of range, must be between -20000 and -20999, inclusive%s [J[u[[ [% [D [\ [ [[[mixed use of deferred rpc destination modesapplication raised communication failure during deferred RPCapplication raised generic exception during deferred RPCmalformed deferred rpc at arg %s of %s in call %s, in tid %sinternal deferred RPC error: %sschema %s does not existreplicated schema %s already existsobject %s.%s does not exist or is invalidobject %s.%s of type %s existsobject group %s is not quiescedobject group %s is quiesced [D[e[[[[[%[?[d[not the masterdef according to %sobject group %s is not mastered at %sdatabase is not a snapshot site for %srepcatlog version or request %s is not supported by version %sthe masterdef is %sa communication failure has occurreda ddl failure has occurredparameter value %s is not appropriatethe request failed because of values %s and %sparameter length exceeds deferred RPC limits [D[[[ [![2"[h#[$[%[error %s, while creating deferror entry at "%s" with error %sparameter type is not %sthe system is being quiescedimported deferred rpc data does not match %s of importing dbsnapshot base table "%s"."%s" differs from master table "%s"."%s"successful user-provided ddl but no snapshot "%s"."%s"column group %s already existscolumn group %s does not existgroup %s is in use; cannot dropcolumn "%s" is already part of a column group &[J'[}([)[*[+[,[>-[\.[r/[0[column "%s" does not exist in table or column grouppriority group %s already existspriority group %s does not existpriority or value not in priority group %spriority or value already in priority group %sduplicate conflict resolution informationincorrect resolution method %suser function requiredinvalid parameter column "%s"no match for specified conflict resolution informationconstraint (%s.%s) does not exist 1[>2[r3[4[5[6[57[_8[9[table "%s"."%s" not registered to collect statisticsprimary key is undefined for table %sdatatype %s for column "%s" table %s not supportedcannot replicate procedure %s; only IN parameters supportedcannot generate replication support for functionsmaximum number of recursive calls exceededparameter datatype %s for procedure %s not supportedduplicate destination for deferred transactiondeferred RPC queue has entries for object group %s :[D;[l@[A[C[D[=E[]F[sG[H[deferred RPC execution disabled for "%s"object %s.%s does not exist or is invalid at master siteonly one snapshot for master table "%s" can be createdsnapshot "%s" does not exist at master sitemismatch of snap base table "%s" at master and snap sitereplication option not installedsite %s does not existinteger value %s is less than 1table %s is missing the primary keyname %s cannot be null or the empty string I[DJ[iK[L[M[N[O[P[JQ[R[value of "%s" argument cannot be nulltable %s and table %s are not shape equivalent (%s)column %s unknown in table %stype %s in table %s is unsupportedobject group %s does not existobject group %s already existsfeature is incompatible with database version at %snode %s is not compatible with replication version "%s"bad name %s for missing_rows_oname1 argumentconnection qualifier "%s" is not valid for object group %s S[DT[iU[h[i[j[k[>l[dm[n[connection qualifier "%s" is too longpropagation mode "%s" is not validgenerated object for base object %s.%s@%s does not existinvalid snapshot name "%s"snapshot "%s"."%s" does not existrefresh was aborted because of conflicts caused by deferred txnsrefresh group "%s"."%s" already existsrefresh group "%s"."%s" does not existrefresh group number %s does not existinsufficient privileges on user "%s" o[Dq[r[s[|[}[C~[n[[[object name %s must be shaped like "schema"."object" or "object"could not find an unused refresh group numbersnapshot "%s"."%s" is already in a refresh groupsnapshot "%s"."%s" is not in refresh group "%s"."%s"interval must evaluate to a time in the futurejob number %s is not a job in the job queueOracle Server could not generate an unused job numberjob number %s is not positiveargument "%s" cannot be NULL or empty stringwrong state: %s [P[m[^^^^-^U^}^^^master site %s already existsexecuting against wrong master site %smaster site %s not known for object groupfunction '%s' parameter '%s' missing or invalidfunction '%s' output '%s' maximum value exceededbad value for modenull host specified in thread-safe logonhost connection in use by another threadcall not supported in non-deferred linkagedatatype not allowed for this callbad bind or define contextbad buffer for piece^8aP b bbbbXbinvalid length for pieceinvalid use of bind variable in trigger WHEN clauseTABLESPACE option can only be used with ALTER INDEX REBUILDduplicate REBUILD option specificationPARALLEL option can only be used with ALTER INDEX REBUILDNOPARALLEL option can only be used with ALTER INDEX REBUILDUNRECOVERABLE option can only be used with ALTER INDEX REBUILDRECOVERABLE option can only be used with ALTER INDEX REBUILDb2blbbbb,bWonly one of PARALLEL or NOPARALLEL clause may be specifiedduplicate TABLESPACE option specificationstandby lock name space exceeds size limit of %s charactersstandby lock name space has illegal character '%s'NOSORT may not be used with a bitmap indexBITMAP may not be used with a cluster indexmaximum number of BITMAP index columns is 14