/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Lorenzo Colitti <lorenzo@colitti.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef nsImapProtocol_h___
#define nsImapProtocol_h___

#include "nsIImapProtocol.h"
#include "nsIImapUrl.h"

#include "nsMsgProtocol.h"
#include "nsIEventQueue.h"
#include "nsIStreamListener.h"
#include "nsIOutputStream.h"
#include "nsIOutputStream.h"
#include "nsIInputStream.h"
#include "nsImapCore.h"
#include "nsString.h"
#include "nsIProgressEventSink.h"
#include "nsIInterfaceRequestor.h"
#include "nsIInterfaceRequestorUtils.h"
#include "nsISocketTransport.h"
#include "nsIInputStreamPump.h"

// imap event sinks
#include "nsIImapMailFolderSink.h"
#include "nsIImapServerSink.h"
#include "nsIImapMessageSink.h"
#include "nsIImapExtensionSink.h"
#include "nsIImapMiscellaneousSink.h"

#include "nsImapServerResponseParser.h"
#include "nsImapProxyEvent.h"
#include "nsImapFlagAndUidState.h"
#include "nsIMAPNamespace.h"
#include "nsVoidArray.h"
#include "nsWeakPtr.h"
#include "nsMsgLineBuffer.h" // we need this to use the nsMsgLineStreamBuffer helper class...
#include "nsIInputStream.h"
#include "nsIMsgIncomingServer.h"
#include "nsISupportsArray.h"
#include "nsIThread.h"
#include "nsIRunnable.h"
#include "nsIImapMockChannel.h"
#include "nsILoadGroup.h"
#include "nsCOMPtr.h"
#include "nsIImapIncomingServer.h"
#include "nsXPIDLString.h"
#include "nsIMsgWindow.h"
#include "nsIMsgLogonRedirector.h"
#include "nsICacheListener.h"
#include "nsIImapHeaderXferInfo.h"
#include "nsMsgLineBuffer.h"
#include "nsIAsyncInputStream.h"
#include "nsITimer.h"
class nsIMAPMessagePartIDArray;
class nsIMsgIncomingServer;

#define kDownLoadCacheSize 16000 // was 1536 - try making it bigger


typedef struct _msg_line_info {
    const char   *adoptedMessageLine;
    PRUint32 uidOfMessage;
} msg_line_info;


class nsMsgImapLineDownloadCache : public nsIImapHeaderInfo, public nsByteArray
{
public:
  NS_DECL_ISUPPORTS
  NS_DECL_NSIIMAPHEADERINFO
  nsMsgImapLineDownloadCache();
  virtual ~nsMsgImapLineDownloadCache();
    PRUint32  CurrentUID();
    PRUint32  SpaceAvailable();
    PRBool CacheEmpty();
    
    msg_line_info *GetCurrentLineInfo();
    
private:
    
    msg_line_info *fLineInfo;
    PRInt32 m_msgSize;
};

class nsMsgImapHdrXferInfo : public nsIImapHeaderXferInfo
{
public:
  NS_DECL_ISUPPORTS
  NS_DECL_NSIIMAPHEADERXFERINFO
  nsMsgImapHdrXferInfo();
  virtual ~nsMsgImapHdrXferInfo();
  // this will return null if we're full, in which case the client code
  // should transfer the headers and retry.
  nsresult GetFreeHeaderInfo(nsIImapHeaderInfo **aResult);
  void    ResetAll(); // reset HeaderInfo's for re-use
  void    ReleaseAll(); // release HeaderInfos (frees up memory)
  void    StartNewHdr(nsIImapHeaderInfo **newHdrInfo);
  // get the hdr info we're currently adding lines to
  nsIImapHeaderInfo           *GetCurrentHdrInfo();
  // call when we've finished adding lines to current hdr
  void    FinishCurrentHdr();
  nsCOMPtr <nsISupportsArray> m_hdrInfos;
  PRInt32   m_nextFreeHdrInfo;
};

// State Flags (Note, I use the word state in terms of storing 
// state information about the connection (authentication, have we sent
// commands, etc. I do not intend it to refer to protocol state)
// Use these flags in conjunction with SetFlag/TestFlag/ClearFlag instead
// of creating PRBools for everything....

#define IMAP_RECEIVED_GREETING	      0x00000001  /* should we pause for the next read */
#define	IMAP_CONNECTION_IS_OPEN	      0x00000004  /* is the connection currently open? */
#define IMAP_WAITING_FOR_DATA         0x00000008
#define IMAP_CLEAN_UP_URL_STATE       0x00000010 // processing clean up url state
#define IMAP_ISSUED_LANGUAGE_REQUEST  0x00000020 // make sure we only issue the language request once per connection...

class nsImapProtocol : public nsIImapProtocol, public nsIRunnable, public nsIInputStreamCallback,
 public nsSupportsWeakReference, public nsMsgProtocol
{
public:
  
  NS_DECL_ISUPPORTS
  NS_DECL_NSIINPUTSTREAMCALLBACK    
  nsImapProtocol();
  virtual ~nsImapProtocol();
  
  virtual nsresult ProcessProtocolState(nsIURI * url, nsIInputStream * inputStream, 
									PRUint32 sourceOffset, PRUint32 length);

  // nsIRunnable method
  NS_IMETHOD Run();
  
  //////////////////////////////////////////////////////////////////////////////////
  // we support the nsIImapProtocol interface
  //////////////////////////////////////////////////////////////////////////////////
  NS_DECL_NSIIMAPPROTOCOL

  void CloseStreams();

  // message id string utilities.
  PRUint32		CountMessagesInIdString(const char *idString);
  static	PRBool	HandlingMultipleMessages(const char *messageIdString);
  
  // escape slashes and double quotes in username/passwords for insecure login.
  static void EscapeUserNamePasswordString(const char *strToEscape, nsCString *resultStr);
  
  // used to start fetching a message.
  void GetShouldDownloadAllHeaders(PRBool *aResult);
  void GetArbitraryHeadersToDownload(char **aResult);
  virtual void AdjustChunkSize();
  virtual void FetchMessage(const char * messageIds, 
    nsIMAPeFetchFields whatToFetch,
    PRBool idAreUid,
    PRUint32 startByte = 0, PRUint32 endByte = 0,
    char *part = 0);
  void FetchTryChunking(const char * messageIds,
    nsIMAPeFetchFields whatToFetch,
    PRBool idIsUid,
    char *part,
    PRUint32 downloadSize,
    PRBool tryChunking);
  virtual void PipelinedFetchMessageParts(nsCString &uid, nsIMAPMessagePartIDArray *parts);
  void FallbackToFetchWholeMsg(const char *messageId, PRUint32 messageSize);
  
  // used when streaming a message fetch
  virtual nsresult BeginMessageDownLoad(PRUint32 totalSize, // for user, headers and body
    const char *contentType);     // some downloads are header only
  virtual void HandleMessageDownLoadLine(const char *line, PRBool isPartialLine, char *lineCopy=nsnull);
  virtual void NormalMessageEndDownload();
  virtual void AbortMessageDownLoad();
  virtual void PostLineDownLoadEvent(msg_line_info *downloadLineDontDelete);
  
  virtual void SetMailboxDiscoveryStatus(EMailboxDiscoverStatus status);
  virtual EMailboxDiscoverStatus GetMailboxDiscoveryStatus();
  
  virtual void ProcessMailboxUpdate(PRBool handlePossibleUndo);
  // Send log output...
  void	Log(const char *logSubName, const char *extraInfo, const char *logData);
  static void LogImapUrl(const char *logMsg, nsIImapUrl *imapUrl);  
  // Comment from 4.5: We really need to break out the thread synchronizer from the
  // connection class...Not sure what this means
  PRBool  GetPseudoInterrupted();
  void	PseudoInterrupt(PRBool the_interrupt);
  
  PRUint32 GetMessageSize(const char * messageId, PRBool idsAreUids);
  PRBool GetSubscribingNow();
  
  PRBool  DeathSignalReceived();
  void    ResetProgressInfo();
  void    SetActive(PRBool active);
  PRBool  GetActive();
  
  PRBool GetShowAttachmentsInline();
  
  // Sets whether or not the content referenced by the current ActiveEntry has been modified.
  // Used for MIME parts on demand.
  void    SetContentModified(IMAP_ContentModifiedType modified);
  PRBool  GetShouldFetchAllParts();
  PRBool  GetIgnoreExpunges() {return m_ignoreExpunges;}
  // Generic accessors required by the imap parser
  char * CreateNewLineFromSocket();
  PRInt32 GetConnectionStatus();
  void SetConnectionStatus(PRInt32 status);
  
  const char* GetImapHostName(); // return the host name from the url for the
  // current connection
  const char* GetImapUserName(); // return the user name from the identity;
  const char* GetImapServerKey(); // return the user name from the incoming server; 
  
  // state set by the imap parser...
  void NotifyMessageFlags(imapMessageFlagsType flags, nsMsgKey key);
  void NotifySearchHit(const char * hitLine);
  
  // Event handlers for the imap parser. 
  void DiscoverMailboxSpec(nsImapMailboxSpec * adoptedBoxSpec);
  void AlertUserEventUsingId(PRUint32 aMessageId);
  void AlertUserEvent(const char * message);
  void AlertUserEventFromServer(const char * aServerEvent);
  
  void ProgressEventFunctionUsingId(PRUint32 aMsgId);
  void ProgressEventFunctionUsingIdWithString(PRUint32 aMsgId, const char *
    aExtraInfo);
  void PercentProgressUpdateEvent(PRUnichar *message, PRInt32 currentProgress, PRInt32 maxProgress);
  void ShowProgress();
  
  // utility function calls made by the server
  
  void Copy(const char * messageList, const char *destinationMailbox, 
    PRBool idsAreUid);
  void Search(const char * searchCriteria,  PRBool useUID, 
    PRBool notifyHit = PR_TRUE);
  // imap commands issued by the parser
  void Store(const char * aMessageList, const char * aMessageData, PRBool
    aIdsAreUid);
  void ProcessStoreFlags(const char * messageIds,
    PRBool idsAreUids,
    imapMessageFlagsType flags,
    PRBool addFlags);
  void IssueUserDefinedMsgCommand(const char *command, const char * messageList);
  void FetchMsgAttribute(const char * messageIds, const char *attribute);
  void Expunge();
  void UidExpunge(const char* messageSet);
  void Close(PRBool shuttingDown = PR_FALSE, PRBool waitForResponse = PR_TRUE);
  void Check();
  void SelectMailbox(const char *mailboxName);
  // more imap commands
  void Logout(PRBool shuttingDown = PR_FALSE, PRBool waitForResponse = PR_TRUE);
  void Noop();
  void XServerInfo();
  void Netscape();
  void XMailboxInfo(const char *mailboxName);
  void XAOL_Option(const char *option);
  void MailboxData();
  void GetMyRightsForFolder(const char *mailboxName);
  void AutoSubscribeToMailboxIfNecessary(const char *mailboxName);
  void Bodystructure(const char *messageId, PRBool idIsUid);
  void PipelinedFetchMessageParts(const char *uid, nsIMAPMessagePartIDArray *parts);
  
  
  // this function does not ref count!!! be careful!!!
  nsIImapUrl  *GetCurrentUrl() {return m_runningUrl;}
  
  // Tunnels
  virtual PRInt32 OpenTunnel (PRInt32 maxNumberOfBytesToRead);
  PRBool GetIOTunnellingEnabled();
  PRInt32 GetTunnellingThreshold();
  
  // acl and namespace stuff
  // notifies libmsg that we have a new personal/default namespace that we're using
  void CommitNamespacesForHostEvent();
  // notifies libmsg that we have new capability data for the current host
  void CommitCapability();
  
  // Adds a set of rights for a given user on a given mailbox on the current host.
  // if userName is NULL, it means "me," or MYRIGHTS.
  // rights is a single string of rights, as specified by RFC2086, the IMAP ACL extension.
  void AddFolderRightsForUser(const char *mailboxName, const char *userName, const char *rights);
  // Clears all rights for a given folder, for all users.
  void ClearAllFolderRights(const char *mailboxName, nsIMAPNamespace *nsForMailbox);
  void RefreshFolderACLView(const char *mailboxName, nsIMAPNamespace *nsForMailbox);
  
  nsresult SetFolderAdminUrl(const char *mailboxName);
  void HandleMemoryFailure();
  void HandleCurrentUrlError();
  
  // UIDPLUS extension
  void SetCopyResponseUid(const char* msgIdString);
  
  // Quota support
  void UpdateFolderQuotaData(nsCString& aQuotaRoot, PRUint32 aUsed, PRUint32 aMax);
  
private:
  // the following flag is used to determine when a url is currently being run. It is cleared when we 
  // finish processng a url and it is set whenever we call Load on a url
  PRBool                        m_urlInProgress;	
  nsCOMPtr<nsIImapUrl>		m_runningUrl; // the nsIImapURL that is currently running
  nsImapAction	m_imapAction;  // current imap action associated with this connnection...
  
  nsCString             m_hostName;
  char                  *m_userName;
  char                  *m_serverKey;
  char                  *m_dataOutputBuf;
  nsMsgLineStreamBuffer * m_inputStreamBuffer;
  PRUint32              m_allocatedSize; // allocated size
  PRUint32        m_totalDataSize; // total data size
  PRUint32        m_curReadIndex;  // current read index
  nsCAutoString   m_trashFolderName;
  
  // Ouput stream for writing commands to the socket
  nsCOMPtr<nsISocketTransport>  m_transport; 
  
  nsCOMPtr<nsIInputStream>  m_channelInputStream;
  nsCOMPtr<nsIOutputStream> m_channelOutputStream;
  nsCOMPtr<nsIImapMockChannel>    m_mockChannel;   // this is the channel we should forward to people
  //nsCOMPtr<nsIRequest> mAsyncReadRequest; // we're going to cancel this when we're done with the conn.
  
  
  // ******* Thread support *******
  nsCOMPtr<nsIEventQueue> m_sinkEventQueue;
  nsCOMPtr<nsIThread>     m_iThread;
  PRThread     *m_thread;
  PRMonitor    *m_dataAvailableMonitor;   // used to notify the arrival of data from the server
  PRMonitor    *m_urlReadyToRunMonitor;	// used to notify the arrival of a new url to be processed
  PRMonitor    *m_pseudoInterruptMonitor;
  PRMonitor    *m_dataMemberMonitor;
  PRMonitor    *m_threadDeathMonitor;
  PRMonitor    *m_waitForBodyIdsMonitor;
  PRMonitor    *m_fetchMsgListMonitor;
  PRMonitor   *m_fetchBodyListMonitor;
  
  PRBool       m_imapThreadIsRunning;
  void ImapThreadMainLoop(void);
  PRInt32     m_connectionStatus;
  nsCString   m_connectionType;

  PRBool      m_nextUrlReadyToRun;
  nsWeakPtr   m_server;
  
  nsCOMPtr<nsIImapMailFolderSink>     m_imapMailFolderSink;
  nsCOMPtr<nsIImapMessageSink>	      m_imapMessageSink;
  nsCOMPtr<nsIImapExtensionSink>      m_imapExtensionSink;
  nsCOMPtr<nsIImapMiscellaneousSink>  m_imapMiscellaneousSink;
  nsCOMPtr<nsIImapServerSink>         m_imapServerSink;
  
  // helper function to setup imap sink interface proxies
  void SetupSinkProxy();
  // End thread support stuff
  
  PRBool GetDeleteIsMoveToTrash();
  PRBool GetShowDeletedMessages();
  PRMonitor *GetDataMemberMonitor();
  nsCString m_currentCommand;
  nsImapServerResponseParser m_parser;
  nsImapServerResponseParser& GetServerStateParser() { return m_parser; };
  
  void HandleIdleResponses();
  virtual PRBool ProcessCurrentURL();
  void EstablishServerConnection();
  virtual void ParseIMAPandCheckForNewMail(const char* commandString =
    nsnull, PRBool ignoreBadNOResponses = PR_FALSE);
  // biff
  void	PeriodicBiff();
  void	SendSetBiffIndicatorEvent(nsMsgBiffState newState);
  PRBool	CheckNewMail();
  
  // folder opening and listing header functions
  void UpdatedMailboxSpec(nsImapMailboxSpec *aSpec);
  void FolderHeaderDump(PRUint32 *msgUids, PRUint32 msgCount);
  void FolderMsgDump(PRUint32 *msgUids, PRUint32 msgCount, nsIMAPeFetchFields fields);
  void FolderMsgDumpLoop(PRUint32 *msgUids, PRUint32 msgCount, nsIMAPeFetchFields fields);
  void WaitForPotentialListOfMsgsToFetch(PRUint32 **msgIdList, PRUint32 &msgCount);
  void WaitForPotentialListOfBodysToFetch(PRUint32 **msgIdList, PRUint32 &msgCount);
  void HeaderFetchCompleted();
  void UploadMessageFromFile(nsIFileSpec* fileSpec, const char* mailboxName, PRTime date,
    imapMessageFlagsType flags, nsCString &keywords);
  
  // mailbox name utilities.
  char *CreateEscapedMailboxName(const char *rawName);
  void SetupMessageFlagsString(nsCString & flagString,
    imapMessageFlagsType flags,
    PRUint16 userFlags);
  
  // header listing data
  PRBool    m_fetchMsgListIsNew;
  PRUint32  m_fetchCount;
  PRUint32  *m_fetchMsgIdList;
  PRBool    m_fetchBodyListIsNew;
  PRUint32  m_fetchBodyCount;
  PRUint32  *m_fetchBodyIdList;
  
  // initialization function given a new url and transport layer
  nsresult  SetupWithUrl(nsIURI * aURL, nsISupports* aConsumer);
  void ReleaseUrlState(PRBool rerunningUrl); // release any state that is stored on a per action basis.
  
  ////////////////////////////////////////////////////////////////////////////////////////
  // Communication methods --> Reading and writing protocol
  ////////////////////////////////////////////////////////////////////////////////////////
  
  // SendData not only writes the NULL terminated data in dataBuffer to our output stream
  // but it also informs the consumer that the data has been written to the stream.
  // aSuppressLogging --> set to true if you wish to suppress logging for this particular command.
  // this is useful for making sure we don't log authenication information like the user's password (which was 
  // encoded anyway), but still we shouldn't add that information to the log.
  nsresult SendData(const char * dataBuffer, PRBool aSuppressLogging = PR_FALSE);
  
  // state ported over from 4.5
  PRBool  m_pseudoInterrupted;
  PRBool  m_active;
  PRBool  m_folderNeedsSubscribing;
  PRBool  m_folderNeedsACLRefreshed;
  PRBool  m_threadShouldDie;
  nsImapFlagAndUidState	*m_flagState;
  nsMsgBiffState        m_currentBiffState;
  // manage the IMAP server command tags
  char m_currentServerCommandTag[10];   // enough for a billion
  int  m_currentServerCommandTagNumber;
  void IncrementCommandTagNumber();
  char *GetServerCommandTag();  
  
  void StartTLS();
  // login related methods. All of these methods actually issue protocol
  void Capability(); // query host for capabilities.
  void Language(); // set the language on the server if it supports it
  void Namespace();
  void InsecureLogin(const char *userName, const char *password);
  nsresult AuthLogin(const char *userName, const char *password, eIMAPCapabilityFlag flag);
  void ProcessAuthenticatedStateURL();
  void ProcessAfterAuthenticated();
  void ProcessSelectedStateURL();
  PRBool TryToLogon();
  
  // Process Authenticated State Url used to be one giant if statement. I've broken out a set of actions
  // based on the imap action passed into the url. The following functions are imap protocol handlers for
  // each action. They are called by ProcessAuthenticatedStateUrl.
  void OnLSubFolders();
  void OnAppendMsgFromFile();

  char *GetFolderPathString(); // OK to call from UI thread

  char * OnCreateServerSourceFolderPathString();
  char * OnCreateServerDestinationFolderPathString();
  nsresult CreateServerSourceFolderPathString(char **result);
  void OnCreateFolder(const char * aSourceMailbox);
  void OnEnsureExistsFolder(const char * aSourceMailbox);
  void OnSubscribe(const char * aSourceMailbox);
  void OnUnsubscribe(const char * aSourceMailbox);
  void RefreshACLForFolderIfNecessary(const char * mailboxName);
  void RefreshACLForFolder(const char * aSourceMailbox);
  void GetACLForFolder(const char *aMailboxName);
  void OnRefreshAllACLs();
  void OnListFolder(const char * aSourceMailbox, PRBool aBool);
  void OnStatusForFolder(const char * sourceMailbox);
  void OnDeleteFolder(const char * aSourceMailbox);
  void OnRenameFolder(const char * aSourceMailbox);
  void OnMoveFolderHierarchy(const char * aSourceMailbox);
  void DeleteFolderAndMsgs(const char * aSourceMailbox);
  void RemoveMsgsAndExpunge();
  void FindMailboxesIfNecessary();
  void CreateMailbox(const char *mailboxName);
  void DeleteMailbox(const char *mailboxName);
  void RenameMailbox(const char *existingName, const char *newName);
  PRBool CreateMailboxRespectingSubscriptions(const char *mailboxName);
  PRBool DeleteMailboxRespectingSubscriptions(const char *mailboxName);
  PRBool  RenameMailboxRespectingSubscriptions(const char *existingName, 
    const char *newName, 
    PRBool reallyRename);
  // notify the fe that a folder was deleted
  void FolderDeleted(const char *mailboxName);
  // notify the fe that a folder creation failed
  void FolderNotCreated(const char *mailboxName);
  // notify the fe that a folder was deleted
  void FolderRenamed(const char *oldName,
    const char *newName);
  
  PRBool FolderIsSelected(const char *mailboxName);

  PRBool	MailboxIsNoSelectMailbox(const char *mailboxName);
  char * CreatePossibleTrashName(const char *prefix);
  const char * GetTrashFolderName();
  PRBool FolderNeedsACLInitialized(const char *folderName);
  void DiscoverMailboxList();
  void DiscoverAllAndSubscribedBoxes();
  void MailboxDiscoveryFinished();
  void NthLevelChildList(const char *onlineMailboxPrefix, PRInt32 depth);
  void Lsub(const char *mailboxPattern, PRBool addDirectoryIfNecessary);
  void List(const char *mailboxPattern, PRBool addDirectoryIfNecessary);
  void Subscribe(const char *mailboxName);
  void Unsubscribe(const char *mailboxName);
  void Idle();
  void EndIdle(PRBool waitForResponse = PR_TRUE);
  // Some imap servers include the mailboxName following the dir-separator in the list of 
  // subfolders of the mailboxName. In fact, they are the same. So we should decide if
  // we should delete such subfolder and provide feedback if the delete operation succeed.
  PRBool DeleteSubFolders(const char* aMailboxName, PRBool & aDeleteSelf);
  PRBool  RenameHierarchyByHand(const char *oldParentMailboxName, 
    const char *newParentMailboxName);
  PRBool RetryUrl();
  
  nsresult GlobalInitialization();
  nsresult Configure(PRInt32 TooFastTime, PRInt32 IdealTime,
    PRInt32 ChunkAddSize, PRInt32 ChunkSize, PRInt32 ChunkThreshold,
    PRBool FetchByChunks, PRInt32 MaxChunkSize);
  nsresult GetMsgWindow(nsIMsgWindow ** aMsgWindow);
  // End Process AuthenticatedState Url helper methods
  
  // Quota support
  void GetQuotaDataIfSupported(const char *aBoxName);
  
  PRBool  m_trackingTime;
  PRTime  m_startTime;
  PRTime  m_endTime;
  PRTime  m_lastActiveTime;
  PRInt32 m_tooFastTime;
  PRInt32 m_idealTime;
  PRInt32 m_chunkAddSize;
  PRInt32 m_chunkStartSize;
  PRBool  m_fetchByChunks;
  PRBool  m_ignoreExpunges;
  PRBool  m_useSecAuth;
  PRInt32 m_socketType;
  PRInt32 m_chunkSize;
  PRInt32 m_chunkThreshold;
  nsMsgImapLineDownloadCache m_downloadLineCache;
  nsMsgImapHdrXferInfo  m_hdrDownloadCache;
  nsCOMPtr <nsIImapHeaderInfo> m_curHdrInfo;
  
  nsIImapHostSessionList * m_hostSessionList;

  PRBool m_fromHeaderSeen;
  
  // these settings allow clients to override various pieces of the connection info from the url
  PRBool m_overRideUrlConnectionInfo;
  
  nsCString m_logonHost;
  nsCString m_logonCookie;
  PRInt16 m_logonPort;
  
  nsXPIDLString mAcceptLanguages;
  
  // progress stuff
  void SetProgressString(PRInt32 stringId);
  
  nsXPIDLString m_progressString;
  PRInt32       m_progressStringId;
  PRInt32       m_progressIndex;
  PRInt32       m_progressCount;
  PRUint32      m_lastProgressStringId;
  PRInt32       m_lastPercent;
  PRInt64       m_lastProgressTime;				
  
  PRBool m_notifySearchHit;
  PRBool m_checkForNewMailDownloadsHeaders;
  PRBool m_needNoop;
  PRBool m_idle;
  PRBool m_useIdle;
  PRInt32 m_noopCount;
  PRBool  m_autoSubscribe, m_autoUnsubscribe, m_autoSubscribeOnOpen;
  PRBool m_closeNeededBeforeSelect;
  PRBool m_retryUrlOnError;

  enum EMailboxHierarchyNameState {
    kNoOperationInProgress,
      kDiscoverBaseFolderInProgress,
      kDiscoverTrashFolderInProgress,
      kDeleteSubFoldersInProgress,
      kListingForInfoOnly,
      kListingForInfoAndDiscovery,
      kDiscoveringNamespacesOnly,
      kListingForCreate
  };
  EMailboxHierarchyNameState  m_hierarchyNameState;
  EMailboxDiscoverStatus      m_discoveryStatus;
  nsVoidArray                 m_listedMailboxList;
  nsVoidArray*                m_deletableChildren;
  PRUint32                    m_flagChangeCount;
  PRTime                      m_lastCheckTime;
  
  PRBool CheckNeeded();
};

// This small class is a "mock" channel because it is a mockery of the imap channel's implementation...
// it's a light weight channel that we can return to necko when they ask for a channel on a url before
// we actually have an imap protocol instance around which can run the url. Please see my comments in
// nsIImapMockChannel.idl for more details..
//
// Threading concern: This class lives entirely in the UI thread.

class nsICacheEntryDescriptor;

class nsImapMockChannel : public nsIImapMockChannel
                        , public nsICacheListener
                        , public nsITransportEventSink
{
public:

  NS_DECL_ISUPPORTS
  NS_DECL_NSIIMAPMOCKCHANNEL
  NS_DECL_NSICHANNEL
  NS_DECL_NSIREQUEST
  NS_DECL_NSICACHELISTENER
  NS_DECL_NSITRANSPORTEVENTSINK
	
  nsImapMockChannel();
  virtual ~nsImapMockChannel();
  static nsresult Create (const nsIID& iid, void **result);

protected:
  // we must break this circular reference between the imap url 
  // and the mock channel when we've finished running the url,
  // or we'll leak like crazy. The idea is that when nsImapUrl::RemoveChannel is called,
  // it will null out the url's pointer to the mock channel
  nsCOMPtr <nsIURI> m_url;

  nsCOMPtr<nsIURI> m_originalUrl;
  nsCOMPtr<nsILoadGroup> m_loadGroup;
  nsCOMPtr<nsIStreamListener> m_channelListener;
  // non owning ref of the context in order to fix a circular ref count
  // because the context is already the uri...
  nsISupports * m_channelContext;
  nsresult m_cancelStatus;
  nsLoadFlags mLoadFlags;
  nsCOMPtr<nsIProgressEventSink> mProgressEventSink;
  nsCOMPtr<nsIInterfaceRequestor> mCallbacks;
  nsCOMPtr<nsISupports> mOwner;
  nsCOMPtr<nsISupports> mSecurityInfo;
  nsCOMPtr<nsIRequest> mCacheRequest; // the request associated with a read from the cache
  nsCString m_ContentType;
  nsWeakPtr   m_protocol;

  PRBool mChannelClosed;
  PRBool mReadingFromCache;
  PRBool mTryingToReadPart;
  PRInt32 mContentLength;

  // cache related helper methods
  nsresult OpenCacheEntry(); // makes a request to the cache service for a cache entry for a url
  PRBool ReadFromLocalCache(); // attempts to read the url out of our local (offline) cache....
  nsresult ReadFromImapConnection(); // creates a new imap connection to read the url 
  nsresult ReadFromMemCache(nsICacheEntryDescriptor *entry); // attempts to read the url out of our memory cache
  nsresult NotifyStartEndReadFromCache(PRBool start);

  // we end up daisy chaining multiple nsIStreamListeners into the load process. 
  nsresult SetupPartExtractorListener(nsIImapUrl * aUrl, nsIStreamListener * aConsumer);
};

#endif  // nsImapProtocol_h___