# aclocal.m4 generated automatically by aclocal 1.4a # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000 # Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # serial 40 AC_PROG_LIBTOOL AC_DEFUN(AC_PROG_LIBTOOL, [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl # Save cache, so that ltconfig can load it AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig AC_CACHE_LOAD # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) AC_DEFUN(AC_LIBTOOL_SETUP, [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl case "$target" in NONE) lt_target="$host" ;; *) lt_target="$target" ;; esac # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], [libtool_flags="$libtool_flags --enable-dlopen"]) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [libtool_flags="$libtool_flags --enable-win32-dll"]) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. case "$lt_target" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; ]) esac ]) # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AC_ENABLE_SHARED, [dnl define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AC_ENABLE_STATIC, [dnl define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN(AC_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. changequote(,)dnl [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' changequote([,])dnl # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(ac_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else ac_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$ac_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) AC_DEFUN(AC_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then ac_cv_prog_gnu_ld=yes else ac_cv_prog_gnu_ld=no fi]) ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN(AC_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -B" break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -p" break else ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN(AC_CHECK_LIBM, [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case "$lt_target" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) dnl old names AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl dnl This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL])dnl dnl a macro to check for ability to create python extensions dnl AM_CHECK_PYTHON_HEADERS([ACTION-IF-POSSIBLE], [ACTION-IF-NOT-POSSIBLE]) dnl function also defines PYTHON_INCLUDES AC_DEFUN([AM_CHECK_PYTHON_HEADERS], [AC_REQUIRE([AM_PATH_PYTHON]) AC_MSG_CHECKING(for headers required to compile python extensions) dnl deduce PYTHON_INCLUDES py_prefix=`$PYTHON -c "import sys; print sys.prefix"` py_exec_prefix=`$PYTHON -c "import sys; print sys.exec_prefix"` PYTHON_INCLUDES="-I${py_prefix}/include/python${PYTHON_VERSION}" if test "$py_prefix" != "$py_exec_prefix"; then PYTHON_INCLUDES="$PYTHON_INCLUDES -I${py_exec_prefix}/include/python${PYTHON_VERSION}" fi AC_SUBST(PYTHON_INCLUDES) dnl check if the headers exist: save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $PYTHON_INCLUDES" AC_TRY_CPP([#include ],dnl [AC_MSG_RESULT(found) $1],dnl [AC_MSG_RESULT(not found) $2]) CPPFLAGS="$save_CPPFLAGS" ]) dnl AM_PATH_PYTHON([package, module]) dnl dnl Adds support for distributing Python modules or the special form dnl of a module called a `package.' Modules of the first type are dnl files ending in `.py' with no '__init__.py' file. This must be dnl placed on the PYTHONPATH, and the default location is PYTHON_SITE, dnl or $(prefix)/lib/python$(PYTHON_VERSION)/site-package dnl dnl A package module is contained in its own directory. This directory dnl is named PACKAGE, which was the name given to automake. The full dnl directory path is PYTHON_SITE_PACKAGE or dnl $(prefix)/lib/python$(PYTHON_VERSION)/site-package/$(PACKAGE) dnl where site-package is on the PYTHONPATH. The `__init__.py' file is dnl located in the directory, along with any other submodules which may dnl be necessary. AC_DEFUN(AM_PATH_PYTHON, [ dnl Find a version of Python. I could check for python versions 1.4 dnl or earlier, but the default installation locations changed from dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages dnl in 1.5, and I don't want to maintain that logic. AC_PATH_PROG(PYTHON, python python1.5) AC_MSG_CHECKING([local Python configuration]) dnl Query Python for its version number. Getting [:3] seems to be dnl the best way to do this; it's what "site.py" does in the standard dnl library. Need to change quote character because of [:3] AC_SUBST(PYTHON_VERSION) changequote(<<, >>)dnl PYTHON_VERSION=`$PYTHON -c "import sys; print sys.version[:3]"` changequote([, ])dnl dnl Use the values of $prefix and $exec_prefix for the corresponding dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX. These are made dnl distinct variables so they can be overridden if need be. However, dnl general consensus is that you shouldn't need this ability. AC_SUBST(PYTHON_PREFIX) PYTHON_PREFIX='${prefix}' AC_SUBST(PYTHON_EXEC_PREFIX) PYTHON_EXEC_PREFIX='${exec_prefix}' dnl At times (like when building shared libraries) you may want dnl to know which OS platform Python thinks this is. AC_SUBST(PYTHON_PLATFORM) PYTHON_PLATFORM=`$PYTHON -c "import sys; print sys.platform"` dnl Set up 4 directories: dnl pythondir -- location of the standard python libraries dnl Also lets automake think PYTHON means something. AC_SUBST(pythondir) pythondir=$PYTHON_PREFIX"/lib/python"$PYTHON_VERSION dnl PYTHON_SITE -- the platform independent site-packages directory AC_SUBST(PYTHON_SITE) PYTHON_SITE=$pythondir/site-packages dnl PYTHON_SITE_PACKAGE -- the $PACKAGE directory under PYTHON_SITE AC_SUBST(PYTHON_SITE_PACKAGE) PYTHON_SITE_PACKAGE=$pythondir/site-packages/$PACKAGE dnl PYTHON_SITE_EXEC -- platform dependent site-packages dir (eg, for dnl shared libraries) AC_SUBST(PYTHON_SITE_EXEC) PYTHON_SITE_EXEC=$PYTHON_EXEC_PREFIX"/lib/python"$PYTHON_VERSION/site-packages dnl Configure PYTHON_SITE_INSTALL so it points to either the module dnl directory or the package subdirectory, depending on the $1 dnl parameter ("module" or "package"). AC_SUBST(PYTHON_SITE_INSTALL) ifelse($1, module, [PYTHON_SITE_INSTALL=$PYTHON_SITE], $1, package, [PYTHON_SITE_INSTALL=$PYTHON_SITE_PACKAGE], [errprint([Unknown option `$1' used in call to AM_PATH_PYTHON. Valid options are `module' or `package' ])m4exit(4)]) dnl All done. AC_MSG_RESULT(looks good) ]) dnl @synopsis AC_CXX_HAVE_SSTREAM dnl dnl If the C++ library has a working stringstream, define HAVE_SSTREAM. dnl dnl @author Ben Stanley dnl @version $Id: acinclude.m4,v 1.1.1.1 2001/04/16 19:52:42 dpash Exp $ dnl AC_DEFUN([AC_CXX_HAVE_SSTREAM], [AC_CACHE_CHECK(whether the compiler has stringstream, ac_cv_cxx_have_sstream, [AC_REQUIRE([AC_CXX_NAMESPACES]) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([#include #ifdef HAVE_NAMESPACES using namespace std; #endif],[stringstream message; message << "Hello"; return 0;], ac_cv_cxx_have_sstream=yes, ac_cv_cxx_have_sstream=no) AC_LANG_RESTORE ]) if test "$ac_cv_cxx_have_sstream" = yes; then AC_DEFINE(HAVE_SSTREAM,,[define if the compiler has stringstream]) fi ]) dnl @synopsis AC_CXX_NAMESPACES dnl dnl If the compiler can prevent names clashes using namespaces, define dnl HAVE_NAMESPACES. dnl dnl @version $Id: acinclude.m4,v 1.1.1.1 2001/04/16 19:52:42 dpash Exp $ dnl @author Luc Maisonobe dnl AC_DEFUN([AC_CXX_NAMESPACES], [AC_CACHE_CHECK(whether the compiler implements namespaces, ac_cv_cxx_namespaces, [AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([namespace Outer { namespace Inner { int i = 0; }}], [using namespace Outer::Inner; return i;], ac_cv_cxx_namespaces=yes, ac_cv_cxx_namespaces=no) AC_LANG_RESTORE ]) if test "$ac_cv_cxx_namespaces" = yes; then AC_DEFINE(HAVE_NAMESPACES,,[define if the compiler implements namespaces]) fi ]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 3 AC_PREREQ([2.13]) # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) # ----------------------------------------------------------- # If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. # The purpose of this macro is to provide the user with a means to # check macros which are provided without letting her know how the # information is coded. # If this macro is not defined by Autoconf, define it here. ifdef([AC_PROVIDE_IFELSE], [], [define([AC_PROVIDE_IFELSE], [ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) # ---------------------------------------------- AC_DEFUN([AM_INIT_AUTOMAKE], [dnl We require 2.13 because we rely on SHELL being computed by configure. AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # Define the identity of the package. PACKAGE=$1 AC_SUBST(PACKAGE)dnl VERSION=$2 AC_SUBST(VERSION)dnl ifelse([$3],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_MISSING_PROG(AMTAR, tar) AM_MISSING_INSTALL_SH # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_DEP_TRACK])dnl AC_REQUIRE([AM_SET_DEPDIR])dnl AC_PROVIDE_IFELSE([AC_PROG_CC], [AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AM_DEPENDENCIES(CXX)])])dnl ]) # # Check to make sure that the build environment is sane. # AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) # AM_MISSING_PROG(NAME, PROGRAM) AC_DEFUN([AM_MISSING_PROG], [ AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # Like AM_MISSING_PROG, but only looks for install-sh. # AM_MISSING_INSTALL_SH() AC_DEFUN([AM_MISSING_INSTALL_SH], [ AC_REQUIRE([AM_MISSING_HAS_RUN]) if test -z "$install_sh"; then install_sh="$ac_aux_dir/install-sh" test -f "$install_sh" || install_sh="$ac_aux_dir/install.sh" test -f "$install_sh" || install_sh="${am_missing_run}${ac_auxdir}/install-sh" dnl FIXME: an evil hack: we remove the SHELL invocation from dnl install_sh because automake adds it back in. Sigh. install_sh="`echo $install_sh | sed -e 's/\${SHELL}//'`" fi AC_SUBST(install_sh)]) # AM_MISSING_HAS_RUN. # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [ test x"${MISSING+set}" = xset || \ MISSING="\${SHELL} `CDPATH=:; cd $ac_aux_dir && pwd`/missing" # Use eval to expand $SHELL if eval "$MISSING --run :"; then am_missing_run="$MISSING --run " else am_missing_run= am_backtick='`' AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) fi ]) # See how the compiler implements dependency checking. # Usage: # AM_DEPENDENCIES(NAME) # NAME is "CC", "CXX" or "OBJC". # We try a few techniques and use that to set a single cache variable. AC_DEFUN([AM_DEPENDENCIES],[ AC_REQUIRE([AM_SET_DEPDIR]) AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS]) ifelse([$1],CC,[ AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_PROG_CPP]) depcc="$CC" depcpp="$CPP"],[$1],CXX,[ AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) depcc="$CXX" depcpp="$CXXCPP"],[$1],OBJC,[ am_cv_OBJC_dependencies_compiler_type=gcc],[ AC_REQUIRE([AC_PROG_][$1]) depcc="$[$1]" depcpp=""]) AC_MSG_CHECKING([dependency style of $depcc]) AC_CACHE_VAL(am_cv_[$1]_dependencies_compiler_type,[ if test -z "$AMDEP"; then echo '#include "conftest.h"' > conftest.c echo 'int i;' > conftest.h am_cv_[$1]_dependencies_compiler_type=none for depmode in `sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < "$am_depcomp"`; do case "$depmode" in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode="$depmode" \ source=conftest.c object=conftest.o \ depfile=conftest.Po tmpdepfile=conftest.TPo \ $SHELL $am_depcomp $depcc -c conftest.c -o conftest.o 2>/dev/null && grep conftest.h conftest.Po > /dev/null 2>&1; then am_cv_[$1]_dependencies_compiler_type="$depmode" break fi done rm -f conftest.* else am_cv_[$1]_dependencies_compiler_type=none fi ]) AC_MSG_RESULT($am_cv_[$1]_dependencies_compiler_type) [$1]DEPMODE="depmode=$am_cv_[$1]_dependencies_compiler_type" AC_SUBST([$1]DEPMODE) ]) # Choose a directory name for dependency files. # This macro is AC_REQUIREd in AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR],[ if test -d .deps || mkdir .deps 2> /dev/null || test -d .deps; then DEPDIR=.deps else DEPDIR=_deps fi AC_SUBST(DEPDIR) ]) AC_DEFUN([AM_DEP_TRACK],[ AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking Speeds up one-time builds --enable-dependency-tracking Do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" = xno; then AMDEP="#" else am_depcomp="$ac_aux_dir/depcomp" if test ! -f "$am_depcomp"; then AMDEP="#" else AMDEP= fi fi AC_SUBST(AMDEP) if test -z "$AMDEP"; then AMDEPBACKSLASH='\' else AMDEPBACKSLASH= fi pushdef([subst], defn([AC_SUBST])) subst(AMDEPBACKSLASH) popdef([subst]) ]) # Generate code to set up dependency tracking. # This macro should only be invoked once -- use via AC_REQUIRE. # Usage: # AM_OUTPUT_DEPENDENCY_COMMANDS # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ AC_OUTPUT_COMMANDS([ test x"$AMDEP" != x"" || for mf in $CONFIG_FILES; do case "$mf" in Makefile) dirpart=.;; */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; *) continue;; esac grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`echo "$file" | sed -e 's|/[^/]*$||'` $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ], [AMDEP="$AMDEP" ac_aux_dir="$ac_aux_dir"])]) # Like AC_CONFIG_HEADER, but automatically create stamp file. # serial 3 # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. We must strip everything past the first ":", # and everything past the last "/". AC_PREREQ([2.12]) AC_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADER([$1]) AC_OUTPUT_COMMANDS( ifelse(patsubst([$1], [[^ ]], []), [], [test -z "$CONFIG_HEADERS" || echo timestamp >dnl patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]), [am_indx=1 for am_file in $1; do case " $CONFIG_HEADERS " in *" $am_file "*) echo timestamp > `echo $am_file | sed 's%:.*%%;s%[^/]*$%%'`stamp-h$am_indx ;; esac am_indx=\`expr \$am_indx + 1\` done]) ]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering # serial 1 AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT($USE_MAINTAINER_MODE) AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi])