# Translation of gconf.po to zh_CN
# Copyright (C) 2001-2004 Free Software Foundation, Inc.
# Wang Jian <lark@linux.net.cn>, 2001.
# Xiong Jiang <jxiong@offtopic.org>, 2003.
# Funda Wang <fundawang@linux.net.cn>, 2003, 2004.
# LoneStar <lone@auvtech.com>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: gconf 2.10\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2007-06-24 03:28+0100\n"
"PO-Revision-Date: 2007-08-26 23:16+0700\n"
"Last-Translator: Yang Zhang <zyangmath@gmail.com>\n"
"Language-Team: zh_CN <i18n-translation@lists.linux.net.cn>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../backends/evoldap-backend.c:159
#, c-format
msgid "Failed to get configuration file path from '%s'"
msgstr "从“%s”获得配置文件路径失败"

#: ../backends/evoldap-backend.c:170
#, c-format
msgid "Created Evolution/LDAP source using configuration file '%s'"
msgstr "已使用配置文件“%s”创建了 Evolution/LDAP 源"

#: ../backends/evoldap-backend.c:446
#, c-format
msgid "Unable to parse XML file '%s'"
msgstr "无法分析 XML 文件“%s”"

#: ../backends/evoldap-backend.c:455
#, c-format
msgid "Config file '%s' is empty"
msgstr "配置文件“%s”是空的"

#: ../backends/evoldap-backend.c:466
#, c-format
msgid "Root node of '%s' must be <evoldap>, not <%s>"
msgstr "“%s”的根节点必须是 <evoldap>，不是 <%s>"

#: ../backends/evoldap-backend.c:504
#, c-format
msgid "No <template> specified in '%s'"
msgstr "“%s”中未指定 <template>"

#: ../backends/evoldap-backend.c:511
#, c-format
msgid "No \"filter\" attribute specified on <template> in '%s'"
msgstr "“%s”中的 <template> 未指定“filter”属性"

#: ../backends/evoldap-backend.c:572
#, c-format
msgid "No LDAP server or base DN specified in '%s'"
msgstr "“%s”中未指定 LDAP 服务器或基 DN"

#: ../backends/evoldap-backend.c:578
#, c-format
msgid "Contacting LDAP server: host '%s', port '%d', base DN '%s'"
msgstr "正连接 LDAP 服务器：主机“%s”，端口“%d”，基 DN“%s”"

#: ../backends/evoldap-backend.c:584
#, c-format
msgid "Failed to contact LDAP server: %s"
msgstr "连接 LDAP 服务器失败：%s"

#: ../backends/evoldap-backend.c:671
#, c-format
msgid "Searching for entries using filter: %s"
msgstr "使用过滤器搜索项目：%s"

#: ../backends/evoldap-backend.c:684
#, c-format
msgid "Error querying LDAP server: %s"
msgstr "查询 LDAP 服务器错误：%s"

#: ../backends/evoldap-backend.c:694
#, c-format
msgid "Got %d entries using filter: %s"
msgstr "使用过滤器获得了 %d 项：%s"

#: ../backends/gconf-merge-tree.c:59
#, c-format
msgid "Cannot find directory %s\n"
msgstr "无法找到目录 %s\n"

#: ../backends/gconf-merge-tree.c:75
#, c-format
msgid "Error saving GConf tree to '%s': %s\n"
msgstr "将 GConf 树保存到“%s”时发生错误：%s\n"

#: ../backends/gconf-merge-tree.c:101
#, c-format
msgid "Usage: %s <dir>\n"
msgstr "用法：%s <dir>\n"

#: ../backends/gconf-merge-tree.c:107
#, c-format
msgid ""
"Usage: %s <dir>\n"
"  Merges a markup backend filesystem hierarchy like:\n"
"    dir/%%gconf.xml\n"
"        subdir1/%%gconf.xml\n"
"        subdir2/%%gconf.xml\n"
"  to:\n"
"    dir/%%gconf-tree.xml\n"
msgstr ""
"用法：%s <dir>\n"
"  合并一个标记后端文件系统层次形如：\n"
"    dir/%%gconf.xml\n"
"        subdir1/%%gconf.xml\n"
"        subdir2/%%gconf.xml\n"
"  成为：\n"
"    dir/%%gconf-tree.xml\n"

#: ../backends/markup-backend.c:164
msgid "Unloading text markup backend module."
msgstr "正在卸载文本标记后端模块。"

#: ../backends/markup-backend.c:227
#: ../backends/xml-backend.c:288
#, c-format
msgid "Couldn't find the XML root directory in the address `%s'"
msgstr "无法在地址“%s”处找到 XML 根目录"

#: ../backends/markup-backend.c:284
#: ../backends/xml-backend.c:343
#, c-format
msgid "Could not make directory `%s': %s"
msgstr "无法创建目录“%s”：%s"

#: ../backends/markup-backend.c:391
#: ../backends/xml-backend.c:442
#, c-format
msgid "Can't read from or write to the XML root directory in the address \"%s\""
msgstr "无法读取或写入地址“%s”中的 XML 根目录"

#: ../backends/markup-backend.c:402
#: ../backends/xml-backend.c:452
#, c-format
msgid "Directory/file permissions for XML source at root %s are: %o/%o"
msgstr "位于根 %s 的 XML 源文件的目录/文件权限是：%o/%o"

#: ../backends/markup-backend.c:741
#: ../backends/xml-backend.c:683
msgid "Remove directory operation is no longer supported, just remove all the values in the directory"
msgstr "删除目录操作不再支持，仅删除目录中所有的值"

#: ../backends/markup-backend.c:827
#: ../backends/xml-backend.c:769
#, c-format
msgid "Could not open lock directory for %s to remove locks: %s\n"
msgstr "无法打开锁定目录以让 %s 删除锁定：%s\n"

#: ../backends/markup-backend.c:840
#: ../backends/xml-backend.c:782
#, c-format
msgid "Could not remove file %s: %s\n"
msgstr "无法删除文件 %s：%s\n"

#: ../backends/markup-backend.c:861
msgid "Initializing Markup backend module"
msgstr "初始化标记语言后端模块"

#: ../backends/markup-backend.c:938
#: ../backends/xml-backend.c:880
#, c-format
msgid "Failed to give up lock on XML directory \"%s\": %s"
msgstr "放弃 XML 目录“%s”上的锁定失败：%s"

#: ../backends/markup-tree.c:397
msgid "Failed to write some configuration data to disk\n"
msgstr "将某些配置数据写入磁盘失败\n"

#: ../backends/markup-tree.c:920
#: ../backends/xml-dir.c:1273
#, c-format
msgid "Could not make directory \"%s\": %s"
msgstr "无法创建目录“%s”：%s"

#: ../backends/markup-tree.c:960
#: ../backends/markup-tree.c:967
#, c-format
msgid "Could not remove \"%s\": %s\n"
msgstr "无法删除文件“%s”：%s\n"

#: ../backends/markup-tree.c:1168
#, c-format
msgid "Failed to write \"%s\": %s\n"
msgstr "写入“%s”失败：%s\n"

#: ../backends/markup-tree.c:1376
#, c-format
msgid "Failed to load file \"%s\": %s"
msgstr "装入文件“%s”失败：%s"

#: ../backends/markup-tree.c:1968
#, c-format
msgid "Line %d character %d: %s"
msgstr "第%d行第%d个字符：%s"

#: ../backends/markup-tree.c:2187
#, c-format
msgid "Attribute \"%s\" repeated twice on the same <%s> element"
msgstr "属性“%s”在同一个 <%s> 元素上重复两次"

#: ../backends/markup-tree.c:2204
#: ../backends/markup-tree.c:2228
#, c-format
msgid "Attribute \"%s\" is invalid on <%s> element in this context"
msgstr "在此上下文中，<%2$s> 元素的属性“%1$s”无效"

#: ../backends/markup-tree.c:2253
#: ../gconf/gconf-value.c:112
#, c-format
msgid "Didn't understand `%s' (expected integer)"
msgstr "不理解“%s”(需要整数)"

#: ../backends/markup-tree.c:2260
#: ../gconf/gconf-value.c:122
#, c-format
msgid "Integer `%s' is too large or small"
msgstr "整数“%s”过大或过小"

#: ../backends/markup-tree.c:2292
#: ../gconf/gconf-value.c:187
#, c-format
msgid "Didn't understand `%s' (expected true or false)"
msgstr "不理解“%s”(需要 true 或 false)"

#: ../backends/markup-tree.c:2316
#: ../gconf/gconf-value.c:143
#, c-format
msgid "Didn't understand `%s' (expected real number)"
msgstr "不理解“%s”(需要实数)"

#: ../backends/markup-tree.c:2386
#: ../backends/markup-tree.c:2415
#: ../backends/markup-tree.c:2455
#: ../backends/markup-tree.c:2479
#: ../backends/markup-tree.c:2487
#: ../backends/markup-tree.c:2542
#: ../backends/markup-tree.c:2607
#: ../backends/markup-tree.c:2719
#: ../backends/markup-tree.c:2787
#: ../backends/markup-tree.c:2845
#: ../backends/markup-tree.c:2995
#, c-format
msgid "No \"%s\" attribute on element <%s>"
msgstr "<%2$s> 元素没有“%1$s”属性"

#: ../backends/markup-tree.c:2395
#, c-format
msgid "Unknown value \"%s\" for \"%s\" attribute on element <%s>"
msgstr "元素 <%3$s> 上的“%2$s”属性设置了未知值“%1$s”"

#: ../backends/markup-tree.c:2429
#, c-format
msgid "Invalid ltype \"%s\" on <%s>"
msgstr "<%2$s> 类型“%1$s”未知"

#: ../backends/markup-tree.c:2509
#, c-format
msgid "Invalid first-element type \"%s\" on <%s>"
msgstr "<%2$s> 上第一元素的类型“%1$s”无效"

#: ../backends/markup-tree.c:2523
#, c-format
msgid "Invalid cdr_type \"%s\" on <%s>"
msgstr "<%2$s> 上 cdr_type“%1$s”无效"

#: ../backends/markup-tree.c:2559
#, c-format
msgid "Invalid list_type \"%s\" on <%s>"
msgstr "<%2$s> 上 list_type“%1$s”无效"

#: ../backends/markup-tree.c:2926
msgid "Two <default> elements below a <local_schema>"
msgstr "一个 <local_schema> 下有两个 <default> 元素"

#: ../backends/markup-tree.c:2941
msgid "Two <longdesc> elements below a <local_schema>"
msgstr "一个 <local_schema> 下有两个 <longdesc> 元素"

#: ../backends/markup-tree.c:2948
#, c-format
msgid "Element <%s> is not allowed below <%s>"
msgstr "不允许在 <%2$s> 下出现元素 <%1$s>"

#: ../backends/markup-tree.c:2973
#: ../backends/markup-tree.c:3078
#: ../backends/markup-tree.c:3132
#: ../backends/markup-tree.c:3183
#, c-format
msgid "<%s> provided but current element does not have type %s"
msgstr "提供了 <%s> 但当前元素不拥有类型 %s"

#: ../backends/markup-tree.c:3056
msgid "Two <car> elements given for same pair"
msgstr "同一对给出了两个 <car> 元素"

#: ../backends/markup-tree.c:3070
msgid "Two <cdr> elements given for same pair"
msgstr "同一对给出了两个 <cdr> 元素"

#: ../backends/markup-tree.c:3124
#, c-format
msgid "<li> has wrong type %s"
msgstr "<li> 的类型 %s 错误"

#: ../backends/markup-tree.c:3155
#, c-format
msgid "<%s> provided but parent <entry> does not have a value"
msgstr "提供了 <%s> 但父 <entry> 没有值"

#: ../backends/markup-tree.c:3196
#: ../backends/markup-tree.c:3219
#: ../backends/markup-tree.c:3241
#: ../backends/markup-tree.c:3258
#, c-format
msgid "Element <%s> is not allowed inside current element"
msgstr "不允许在当前元素中出现元素 <%s>"

#: ../backends/markup-tree.c:3290
#, c-format
msgid "Outermost element in menu file must be <gconf> not <%s>"
msgstr "菜单文件中的最里层元素应该是 <gconf> 而非 <%s>"

#: ../backends/markup-tree.c:3310
#: ../backends/markup-tree.c:3332
#: ../backends/markup-tree.c:3337
#, c-format
msgid "Element <%s> is not allowed inside a <%s> element"
msgstr "不允许在 <%2$s> 元素内出现元素 <%1$s>"

#: ../backends/markup-tree.c:3481
#, c-format
msgid "No text is allowed inside element <%s>"
msgstr "不允许在元素 <%s> 内出现文字"

#: ../backends/markup-tree.c:3598
#: ../backends/markup-tree.c:4378
#: ../backends/markup-tree.c:4396
#, c-format
msgid "Failed to open \"%s\": %s\n"
msgstr "打开“%s”失败：%s\n"

#: ../backends/markup-tree.c:3628
#, c-format
msgid "Error reading \"%s\": %s\n"
msgstr "读取“%s”出错：%s\n"

#: ../backends/markup-tree.c:4483
#, c-format
msgid "Error writing file \"%s\": %s"
msgstr "写入文件“%s”出错：%s"

#: ../backends/markup-tree.c:4512
#, c-format
msgid "Failed to move temporary file \"%s\" to final location \"%s\": %s"
msgstr "将临时文件“%s”移至最终位置“%s”失败：%s"

#: ../backends/xml-backend.c:239
msgid "Unloading XML backend module."
msgstr "正在卸载 XML 后端模块。"

#: ../backends/xml-backend.c:618
#, c-format
msgid "Error syncing the XML backend directory cache: %s"
msgstr "在同步 XML 后端目录缓存时发生错误：%s"

#: ../backends/xml-backend.c:809
msgid "Initializing XML backend module"
msgstr "正在初始化 XML 后端模块"

#: ../backends/xml-cache.c:286
msgid "Failed to sync XML cache contents to disk"
msgstr "同步 XML 缓存内容到磁盘失败"

#: ../backends/xml-cache.c:316
#, c-format
msgid "Unable to remove directory `%s' from the XML backend cache, because it has not been successfully synced to disk"
msgstr "无法从 XML 后端缓存中删除目录“%s”，因为它还没有成功地同步到磁盘"

#: ../backends/xml-dir.c:169
#, c-format
msgid "Could not stat `%s': %s"
msgstr "无法查看“%s”：%s"

#: ../backends/xml-dir.c:179
#, c-format
msgid "XML filename `%s' is a directory"
msgstr "XML 文件名“%s”是个目录"

#: ../backends/xml-dir.c:416
#: ../backends/xml-dir.c:425
#, c-format
msgid "Failed to delete \"%s\": %s"
msgstr "删除“%s”失败：%s"

#: ../backends/xml-dir.c:471
#, c-format
msgid "Failed to write file `%s': %s"
msgstr "写文件“%s”失败：%s"

#: ../backends/xml-dir.c:485
#: ../backends/xml-dir.c:521
#, c-format
msgid "Failed to set mode on `%s': %s"
msgstr "设置“%s”的模式失败：%s"

#: ../backends/xml-dir.c:496
#, c-format
msgid "Failed to write XML data to `%s': %s"
msgstr "将 XML 数据写入“%s”失败：%s"

#: ../backends/xml-dir.c:506
#: ../backends/xml-dir.c:1297
#, c-format
msgid "Failed to close file `%s': %s"
msgstr "关闭文件“%s”失败：%s"

#: ../backends/xml-dir.c:536
#: ../backends/xml-dir.c:546
#, c-format
msgid "Failed to rename `%s' to `%s': %s"
msgstr "将“%s”改名为“%s”失败：%s"

#: ../backends/xml-dir.c:552
#, c-format
msgid "Failed to restore `%s' from `%s': %s"
msgstr "从“%2$s”恢复“%1$s”失败：%3$s"

#: ../backends/xml-dir.c:564
#, c-format
msgid "Failed to delete old file `%s': %s"
msgstr "删除旧文件“%s”失败：%s"

#. These are all fatal errors
#: ../backends/xml-dir.c:996
#, c-format
msgid "Failed to stat `%s': %s"
msgstr "统计“%s”失败：%s"

#: ../backends/xml-dir.c:1170
#, c-format
msgid "Duplicate entry `%s' in `%s', ignoring"
msgstr "“%2$s”中存在重复项“%1$s”，忽略"

#: ../backends/xml-dir.c:1192
#, c-format
msgid "Entry with no name in XML file `%s', ignoring"
msgstr "在 XML 文件“%s”中的项目没有名字，忽略"

#: ../backends/xml-dir.c:1200
#, c-format
msgid "A toplevel node in XML file `%s' is <%s> rather than <entry>, ignoring"
msgstr "XML 文件“%s”的顶层节点是 <%s> 而不是 <entry>，忽略"

#: ../backends/xml-dir.c:1289
#, c-format
msgid "Failed to create file `%s': %s"
msgstr "创建文件“%s”失败：%s"

#: ../backends/xml-dir.c:1388
#, c-format
msgid "Failed to parse XML file \"%s\""
msgstr "分析 XML 文件“%s”失败"

#. There was an error
#: ../backends/xml-entry.c:154
#, c-format
msgid "Ignoring XML node with name `%s': %s"
msgstr "忽略名为“%s”的 XML 结点：%s"

#: ../backends/xml-entry.c:332
#, c-format
msgid "Ignoring schema name `%s', invalid: %s"
msgstr "忽略 schema 名称“%s”，无效：%s"

#: ../backends/xml-entry.c:380
#, c-format
msgid "Ignoring XML node `%s': %s"
msgstr "忽略 XML 结点“%s”：%s"

#: ../backends/xml-entry.c:732
#, c-format
msgid "Failed reading default value for schema: %s"
msgstr "读取 schema 的默认值失败：%s"

#: ../backends/xml-entry.c:952
#, c-format
msgid "No \"type\" attribute for <%s> node"
msgstr "<%s> 节点没有“type”属性"

#: ../backends/xml-entry.c:966
#, c-format
msgid "A node has unknown \"type\" attribute `%s', ignoring"
msgstr "节点有未知的“type”属性“%s”，忽略"

#: ../backends/xml-entry.c:981
msgid "No \"value\" attribute for node"
msgstr "节点没有“value”属性"

#: ../backends/xml-entry.c:1029
#: ../backends/xml-entry.c:1105
#, c-format
msgid "Didn't understand XML node <%s> inside an XML list node"
msgstr "无法理解在 XML 列表节点中的 XML 节点 <%s>"

#: ../backends/xml-entry.c:1063
msgid "Invalid type (list, pair, or unknown) in a list node"
msgstr "列表节点中有无效的类型(list、pair 或 unknow)"

#: ../backends/xml-entry.c:1086
#, c-format
msgid "Bad XML node: %s"
msgstr "错误的 XML 节点：%s"

#: ../backends/xml-entry.c:1094
#, c-format
msgid "List contains a badly-typed node (%s, should be %s)"
msgstr "列表包含错误类型的节点(%s，应该为 %s)"

#: ../backends/xml-entry.c:1146
#, c-format
msgid "Ignoring bad car from XML pair: %s"
msgstr "忽略来自 XML pair 的错误 car：%s"

#: ../backends/xml-entry.c:1155
#: ../backends/xml-entry.c:1178
msgid "parsing XML file: lists and pairs may not be placed inside a pair"
msgstr "解析 XML 文件：不能在 pair 中放置 list 和 pair"

#: ../backends/xml-entry.c:1168
#, c-format
msgid "Ignoring bad cdr from XML pair: %s"
msgstr "忽略来自 XML pair 的错误 cdr：%s"

#: ../backends/xml-entry.c:1187
#, c-format
msgid "Didn't understand XML node <%s> inside an XML pair node"
msgstr "无法理解位于 XML pair 节点内的 XML 节点 <%s> "

#: ../backends/xml-entry.c:1205
msgid "Didn't find car and cdr for XML pair node"
msgstr "找不到 XML pair 节点的 car 和 cdr "

#: ../backends/xml-entry.c:1211
msgid "Missing cdr from pair of values in XML file"
msgstr "缺少来自 XML 文件中 pair 的 cdr 值"

#: ../backends/xml-entry.c:1218
msgid "Missing car from pair of values in XML file"
msgstr "缺少来自 XML 文件中 pair 的 car 值"

#: ../backends/xml-entry.c:1223
msgid "Missing both car and cdr values from pair in XML file"
msgstr "缺少来自 XML 文件中 pair 的 car 和 cdr 值"

#: ../gconf/gconf-backend.c:62
#, c-format
msgid "`%c' is an invalid character in a configuration storage address"
msgstr "“%c”在配置存储地址中是无效字符"

#. -- end debug only
#: ../gconf/gconf-backend.c:216
#, c-format
msgid "No such file `%s'\n"
msgstr "没有文件“%s”\n"

#: ../gconf/gconf-backend.c:261
#, c-format
msgid "Backend `%s' failed return a vtable\n"
msgstr "后端“%s”返回 vtable 失败\n"

#: ../gconf/gconf-backend.c:276
#, c-format
msgid "Backend `%s' missing required vtable member `%s'\n"
msgstr "后端“%s”缺少必须的 vtable 成员“%s”\n"

#: ../gconf/gconf-backend.c:302
#, c-format
msgid "Bad address `%s': %s"
msgstr "错误地址“%s”：%s"

#: ../gconf/gconf-backend.c:312
#, c-format
msgid "Bad address `%s'"
msgstr "错误地址“%s”"

#: ../gconf/gconf-backend.c:337
msgid "GConf won't work without dynamic module support (gmodule)"
msgstr "没有动态模块支持(gmodule)，GConf 无法工作"

#: ../gconf/gconf-backend.c:346
#, c-format
msgid "Error opening module `%s': %s\n"
msgstr "打开模块“%s”出错：%s\n"

#: ../gconf/gconf-backend.c:357
#, c-format
msgid "Error initializing module `%s': %s\n"
msgstr "初始化模块“%s”出错：%s\n"

#: ../gconf/gconf-backend.c:388
#, c-format
msgid "Couldn't locate backend module for `%s'"
msgstr "无法为“%s”定位后端模块"

#: ../gconf/gconf-backend.c:425
msgid "Failed to shut down backend"
msgstr "关闭后端模块失败"

#: ../gconf/gconf-client.c:344
#: ../gconf/gconf-client.c:362
#, c-format
msgid "GConf Error: %s\n"
msgstr "GConf 错误：%s\n"

#: ../gconf/gconf-client.c:912
#, c-format
msgid "GConf warning: failure listing pairs in `%s': %s"
msgstr "GConf 警告：列出“%s”中的配对失败：%s"

#: ../gconf/gconf-client.c:1197
#, c-format
msgid "Expected `%s' got `%s' for key %s"
msgstr "键 %3$s 需要“%1$s”，实际为“%2$s”"

#: ../gconf/gconf-database.c:211
msgid "Received invalid value in set request"
msgstr "在“设置”请求中收到无效值"

#: ../gconf/gconf-database.c:219
#, c-format
msgid "Couldn't make sense of CORBA value received in set request for key `%s'"
msgstr "无法理解键“%s”的设置请求中接收到的 CORBA 值"

#: ../gconf/gconf-database.c:502
msgid "Received request to drop all cached data"
msgstr "接收到“丢弃所有缓冲的数据”的请求"

#: ../gconf/gconf-database.c:519
msgid "Received request to sync synchronously"
msgstr "接收到“同时进行同步”的请求"

#: ../gconf/gconf-database.c:807
msgid "Fatal error: failed to get object reference for ConfigDatabase"
msgstr "严重错误：为 ConfigDatabase 获取对象引用失败"

#: ../gconf/gconf-database.c:973
#, c-format
msgid "Failed to sync one or more sources: %s"
msgstr "同步一个或多个源失败：%s"

#: ../gconf/gconf-database.c:1046
#, c-format
msgid "Error obtaining new value for `%s' after change notification from backend `%s': %s"
msgstr "在后端“%2$s”发送的更改通知后获取“%1$s”的新值出错：%3$s"

#: ../gconf/gconf-database.c:1119
#, c-format
msgid "Failed to log addition of listener %s (%s);will not be able to restore this listener on gconfd restart, resulting in unreliable notification of configuration changes."
msgstr "记录添加了监听程序 %s 失败(%s)；将无法在 gconfd 重启时恢复该监听程序，这会导致配置更改的通知不可靠。"

#: ../gconf/gconf-database.c:1153
#, c-format
msgid "Listener ID %lu doesn't exist"
msgstr "监听程序 ID %lu 不存在"

#: ../gconf/gconf-database.c:1167
#, c-format
msgid "Failed to log removal of listener to logfile (most likely harmless, may result in a notification weirdly reappearing): %s"
msgstr "向日志文件记录删除了监听程序失败(多半无害，可能会导致某个通知奇怪地反复出现)：%s"

#: ../gconf/gconf-database.c:1299
#: ../gconf/gconf-sources.c:1697
#, c-format
msgid "Error getting value for `%s': %s"
msgstr "获取“%s”的值时发生错误：%s"

#: ../gconf/gconf-database.c:1349
#, c-format
msgid "Error setting value for `%s': %s"
msgstr "设置“%s”的值时发生错误：%s"

#: ../gconf/gconf-database.c:1397
#, c-format
msgid "Error unsetting `%s': %s"
msgstr "取消“%s”设置值时发生错误：%s"

#: ../gconf/gconf-database.c:1426
#, c-format
msgid "Error getting default value for `%s': %s"
msgstr "获取“%s”的默认值时发生错误：%s"

#: ../gconf/gconf-database.c:1484
#, c-format
msgid "Error unsetting \"%s\": %s"
msgstr "取消“%s”的设置值时发生错误：%s"

#: ../gconf/gconf-database.c:1515
#, c-format
msgid "Error getting new value for \"%s\": %s"
msgstr "获取“%s”的新值时发生错误：%s"

#: ../gconf/gconf-database.c:1570
#, c-format
msgid "Error checking existence of `%s': %s"
msgstr "检查“%s”的存在时发生错误：%s"

#: ../gconf/gconf-database.c:1594
#, c-format
msgid "Error removing directory \"%s\": %s"
msgstr "删除目录“%s”发生错误：%s"

#: ../gconf/gconf-database.c:1621
#, c-format
msgid "Failed to get all entries in `%s': %s"
msgstr "获取“%s”中的所有项失败：%s"

#: ../gconf/gconf-database.c:1647
#, c-format
msgid "Error listing dirs in `%s': %s"
msgstr "列出“%s”中的目录时发生错误：%s"

#: ../gconf/gconf-database.c:1668
#, c-format
msgid "Error setting schema for `%s': %s"
msgstr "为“%s”设置模式时发生错误：%s"

#: ../gconf/gconf-error.c:25
msgid "Success"
msgstr "成功"

#: ../gconf/gconf-error.c:26
msgid "Failed"
msgstr "失败"

#: ../gconf/gconf-error.c:27
msgid "Configuration server couldn't be contacted"
msgstr "无法连接配置服务器"

#: ../gconf/gconf-error.c:28
msgid "Permission denied"
msgstr "没有权限"

#: ../gconf/gconf-error.c:29
msgid "Couldn't resolve address for configuration source"
msgstr "无法解析配置源地址"

#: ../gconf/gconf-error.c:30
msgid "Bad key or directory name"
msgstr "错误的键或目录名"

#: ../gconf/gconf-error.c:31
msgid "Parse error"
msgstr "解析错误"

#: ../gconf/gconf-error.c:32
msgid "Corrupt data in configuration source database"
msgstr "在配置源数据库中有损坏的数据"

#: ../gconf/gconf-error.c:33
msgid "Type mismatch"
msgstr "类型不匹配"

#: ../gconf/gconf-error.c:34
msgid "Key operation on directory"
msgstr "对目录进行键操作"

#: ../gconf/gconf-error.c:35
msgid "Directory operation on key"
msgstr "对键进行目录操作"

#: ../gconf/gconf-error.c:36
msgid "Can't overwrite existing read-only value"
msgstr "无法覆盖已存在的只读值"

#: ../gconf/gconf-error.c:37
msgid "Object Activation Framework error"
msgstr "对象激活框架错误"

#: ../gconf/gconf-error.c:38
msgid "Operation not allowed without configuration server"
msgstr "没有配置服务器操作不允许"

#: ../gconf/gconf-error.c:39
msgid "Failed to get a lock"
msgstr "获取锁定失败"

#: ../gconf/gconf-error.c:40
msgid "No database available to save your configuration"
msgstr "没有可用的数据库来保存您的配置"

#: ../gconf/gconf-internals.c:91
#, c-format
msgid "No '/' in key \"%s\""
msgstr "在键“%s”中没有“/”"

#: ../gconf/gconf-internals.c:178
#, c-format
msgid "Invalid UTF-8 in string value in '%s'"
msgstr "“%s”中有无效的 UTF-8 字符串值"

#: ../gconf/gconf-internals.c:237
msgid "Couldn't interpret CORBA value for list element"
msgstr "无法为列表元素解释 CORBA 值"

#: ../gconf/gconf-internals.c:239
#, c-format
msgid "Incorrect type for list element in %s"
msgstr "%s 中有不正确的列表元素类型"

#: ../gconf/gconf-internals.c:252
msgid "Received list from gconfd with a bad list type"
msgstr "从 gconfd 接收到的列表的列表类型不正确"

#: ../gconf/gconf-internals.c:433
msgid "Failed to convert object to IOR"
msgstr "将对象转换到 IOR 失败"

#: ../gconf/gconf-internals.c:570
msgid "Invalid UTF-8 in locale for schema"
msgstr "schema 的区域设置中有无效的 UTF-8 字符"

#: ../gconf/gconf-internals.c:578
msgid "Invalid UTF-8 in short description for schema"
msgstr "schema 的简短说明中有无效的 UTF-8 字符"

#: ../gconf/gconf-internals.c:586
msgid "Invalid UTF-8 in long description for schema"
msgstr "schema 的详细说明中有无效的 UTF-8 字符"

#: ../gconf/gconf-internals.c:594
msgid "Invalid UTF-8 in owner for schema"
msgstr "schema 的所有者中有无效的 UTF-8 字符"

#: ../gconf/gconf-internals.c:839
#, c-format
msgid "Couldn't open path file `%s': %s\n"
msgstr "无法打开路径文件“%s”：%s\n"

#: ../gconf/gconf-internals.c:895
#, c-format
msgid "Adding source `%s'\n"
msgstr "正在添加源“%s”\n"

#: ../gconf/gconf-internals.c:910
#, c-format
msgid "Read error on file `%s': %s\n"
msgstr "文件“%s”上的读取错误：%s\n"

#: ../gconf/gconf-internals.c:1243
#: ../gconf/gconf-internals.c:1309
#: ../gconf/gconf-value.c:156
#: ../gconf/gconf-value.c:255
#: ../gconf/gconf-value.c:397
#: ../gconf/gconf-value.c:1672
msgid "Text contains invalid UTF-8"
msgstr "文本包含无效的 UTF-8"

#: ../gconf/gconf-internals.c:1394
#, c-format
msgid "Expected list, got %s"
msgstr "需要列表，得到的是 %s"

#: ../gconf/gconf-internals.c:1404
#, c-format
msgid "Expected list of %s, got list of %s"
msgstr "需要 %s 列表，得到的是 %s 列表"

#: ../gconf/gconf-internals.c:1532
#, c-format
msgid "Expected pair, got %s"
msgstr "需要对，得到的是 %s"

#: ../gconf/gconf-internals.c:1546
#, c-format
msgid "Expected (%s,%s) pair, got a pair with one or both values missing"
msgstr "需要 (%s,%s) 对，得到的对仅有一个值或两个值都没有"

#: ../gconf/gconf-internals.c:1562
#, c-format
msgid "Expected pair of type (%s,%s) got type (%s,%s)"
msgstr "需要类型 (%s,%s) 对，得到的是类型 (%s,%s)"

#: ../gconf/gconf-internals.c:1678
msgid "Quoted string doesn't begin with a quotation mark"
msgstr "引用的字符串不是以引号开始"

#: ../gconf/gconf-internals.c:1739
msgid "Quoted string doesn't end with a quotation mark"
msgstr "引用的字符串不是以引号结束"

#: ../gconf/gconf-internals.c:1857
msgid "Encoded value is not valid UTF-8"
msgstr "已编码的值不是有效的 UTF-8"

#: ../gconf/gconf-internals.c:2341
#, c-format
msgid "Could not lock temporary file '%s': %s"
msgstr "无法锁住临时文件“%s”：%s"

#: ../gconf/gconf-internals.c:2368
#, c-format
msgid "Could not create file '%s', probably because it already exists"
msgstr "无法创建文件“%s”，也许它已经存在"

#: ../gconf/gconf-internals.c:2436
#, c-format
msgid "Failed to create or open '%s'"
msgstr "创建或打开“%s”失败"

#: ../gconf/gconf-internals.c:2446
#, c-format
msgid "Failed to lock '%s': probably another process has the lock, or your operating system has NFS file locking misconfigured (%s)"
msgstr "锁定“%s”失败：可能另一个进程已锁定它，或者您的操作系统的 NFS 文件锁定配置不正确 (%s)"

#: ../gconf/gconf-internals.c:2466
#, c-format
msgid "Failed to remove '%s': %s"
msgstr "删除“%s”失败：%s"

#: ../gconf/gconf-internals.c:2490
#, c-format
msgid "IOR file '%s' not opened successfully, no gconfd located: %s"
msgstr "IOR 文件“%s”没有成功打开，无 gconfd 位于：%s"

#: ../gconf/gconf-internals.c:2520
#, c-format
msgid "gconftool or other non-gconfd process has the lock file '%s'"
msgstr "gconftool 或其它非 gconfd 进程的锁定文件为“%s”"

#: ../gconf/gconf-internals.c:2537
msgid "couldn't contact ORB to resolve existing gconfd object reference"
msgstr "无法联系 ORB 以解决现有的 gconfd 对象引用"

#: ../gconf/gconf-internals.c:2547
#, c-format
msgid "Failed to convert IOR '%s' to an object reference"
msgstr "将 IOR“%s”转换为对象引用失败"

#: ../gconf/gconf-internals.c:2599
#, c-format
msgid "couldn't create directory `%s': %s"
msgstr "无法创建目录“%s”：%s"

#: ../gconf/gconf-internals.c:2656
#, c-format
msgid "Can't write to file `%s': %s"
msgstr "无法写入文件“%s”：%s"

#: ../gconf/gconf-internals.c:2697
#, c-format
msgid "We didn't have the lock on file `%s', but we should have"
msgstr "我们没有锁定文件“%s”，但应该锁定"

#: ../gconf/gconf-internals.c:2720
#, c-format
msgid "Failed to link '%s' to '%s': %s"
msgstr "将“%s”链接到“%s”失败：%s"

#: ../gconf/gconf-internals.c:2732
#, c-format
msgid "Failed to remove lock file `%s': %s"
msgstr "删除锁定文件“%s”失败：%s"

#: ../gconf/gconf-internals.c:2755
#, c-format
msgid "Failed to clean up file '%s': %s"
msgstr "清理文件“%s”失败：%s"

#: ../gconf/gconf-internals.c:2771
#, c-format
msgid "Failed to remove lock directory `%s': %s"
msgstr "删除锁定目录“%s”失败：%s"

#: ../gconf/gconf-internals.c:2813
#, c-format
msgid "Failed to unlink lock file %s: %s\n"
msgstr "取消锁定文件 %s 失败：%s\n"

#: ../gconf/gconf-internals.c:2984
#: ../gconf/gconfd.c:570
#, c-format
msgid "Failed to stat %s: %s"
msgstr "查看 %s 失败：%s"

#: ../gconf/gconf-internals.c:3006
#, c-format
msgid "Server ping error: %s"
msgstr "服务器 ping 错误：%s"

#: ../gconf/gconf-internals.c:3031
#, c-format
msgid "Failed to create pipe for communicating with spawned gconf daemon: %s\n"
msgstr "创建与产生的 gconf 守护进程通讯的管道失败：%s\n"

#: ../gconf/gconf-internals.c:3055
#, c-format
msgid "Failed to launch configuration server: %s\n"
msgstr "启动配置服务器失败：%s\n"

#: ../gconf/gconf-internals.c:3085
#, c-format
msgid "Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - %s)"
msgstr "联系配置服务器失败；某些可能原因是需要为 ORBit 启用 TCP/IP 联网，或者由于系统崩溃，您的 NFS 锁定已失效。请访问 http://www.gnome.org/projects/gconf/ 了解详细信息。(详细信息 - %s)"

#: ../gconf/gconf-internals.c:3086
msgid "none"
msgstr "无"

#: ../gconf/gconf-sanity-check.c:48
msgid "- Sanity checks for GConf"
msgstr "- 为 GConf 进行的稳健性检测"

#: ../gconf/gconf-sanity-check.c:57
#: ../gconf/gconftool.c:616
#, c-format
msgid ""
"Error while parsing options: %s.\n"
"Run '%s --help' to see a full list of available command line options.\n"
msgstr ""
"解析选项出错：%s。\n"
"运行“%s --help”可查看可用命令行选项的完整列表。\n"

#: ../gconf/gconf-sanity-check.c:128
#: ../gconf/gconf-sanity-check.c:153
#, c-format
msgid ""
"Please contact your system administrator to resolve the following problem:\n"
"Could not open or create the file \"%s\"; this indicates that there may be a problem with your configuration, as many programs will need to create files in your home directory. The error was \"%s\" (errno = %d)."
msgstr ""
"请与系统管理员联系以解决如下问题：\n"
"无法打开或创建文件“%s”；这表示您的配置可能有问题， 因为许多程序都将需要在您的主目录下创建文件。该错误为“%s”(错误号 = %d)。"

#: ../gconf/gconf-sanity-check.c:167
#, c-format
msgid ""
"Please contact your system administrator to resolve the following problem:\n"
"Could not lock the file \"%s\"; this indicates that there may be a problem with your operating system configuration. If you have an NFS-mounted home directory, either the client or the server may be set up incorrectly. See the rpc.statd and rpc.lockd documentation. A common cause of this error is that the \"nfslock\" service has been disabled.The error was \"%s\" (errno = %d)."
msgstr ""
"请与系统管理员联系以解决如下问题：\n"
"无法锁定文件“%s”；这表明您的操作系统配置可能有问题。如果您的主目录安装了 NFS 文件系统，那么客户端或者服务器可能设置不正确。请参见rpc.statd 和 rpc.lockd 文档。该错误的常见原因是“nfslock”服务已被禁用。该错误为“%s”(错误号 = %d)。"

#: ../gconf/gconf-sanity-check.c:184
#, c-format
msgid "Can't remove file %s: %s\n"
msgstr "无法删除文件 %s：%s\n"

#: ../gconf/gconf-sanity-check.c:220
#, c-format
msgid ""
"Please contact your system administrator to resolve the following problem:\n"
"No configuration sources in the configuration file \"%s\"; this means that preferences and other settings can't be saved. %s%s"
msgstr ""
"请与系统管理员联系以解决如下问题：\n"
"配置文件“%s”中没有配置源；这意味着无法保存首选项和其它设置。%s%s"

#: ../gconf/gconf-sanity-check.c:223
msgid "Error reading the file: "
msgstr "读取文件时出错："

#: ../gconf/gconf-sanity-check.c:246
#, c-format
msgid ""
"Please contact your system administrator to resolve the following problem:\n"
"Could not resolve the address \"%s\" in the configuration file \"%s\": %s"
msgstr ""
"请与系统管理员联系以解决如下问题：\n"
"无法解析地址“%s”(位于配置文件“%s”中)：%s"

#: ../gconf/gconf-sanity-check.c:307
msgid ""
"The files that contain your preference settings are currently in use.\n"
"\n"
"You might be logged in to a session from another computer, and the other login session is using your preference settings files.\n"
"\n"
"You can continue to use the current session, but this might cause temporary problems with the preference settings in the other session.\n"
"\n"
"Do you want to continue?"
msgstr ""
"包含您首选项设置的文件正在使用中。\n"
"\n"
"您可能已经从其它电脑上登录了会话，而该会话正在使用您的首选项设置文件。\n"
"\n"
"您可以继续使用当前会话，但是可能在其它会话的首选项设置上遇到临时问题。\n"
"\n"
"您想要继续吗？"

#: ../gconf/gconf-sanity-check.c:328
msgid "_Log Out"
msgstr "注销(_L)"

#: ../gconf/gconf-sanity-check.c:330
msgid "_Continue"
msgstr "继续(_C)"

#: ../gconf/gconf-sanity-check.c:343
#, c-format
msgid "%s Continue (y/n)?"
msgstr "%s 继续吗(y/n)？"

#: ../gconf/gconf-schema.c:217
#: ../gconf/gconf-schema.c:225
#: ../gconf/gconf-schema.c:233
#: ../gconf/gconf-schema.c:241
msgid "Schema contains invalid UTF-8"
msgstr "schema 包含无效的 UTF-8"

#: ../gconf/gconf-schema.c:250
msgid "Schema specifies type list but doesn't specify the type of the list elements"
msgstr "schema 指定了列表类型，但并未指定列表元素的类型"

#: ../gconf/gconf-schema.c:260
msgid "Schema specifies type pair but doesn't specify the type of the car/cdr elements"
msgstr "schema 指定了成对类型，但并未指定 car/cdr 元素的类型"

#: ../gconf/gconf-sources.c:371
#, c-format
msgid "Failed to load source \"%s\": %s"
msgstr "载入源“%s”失败：%s"

#: ../gconf/gconf-sources.c:411
#, c-format
msgid "Resolved address \"%s\" to a writable configuration source at position %d"
msgstr "地址“%s”解析为位于 %d 的可写入配置源"

#: ../gconf/gconf-sources.c:417
#, c-format
msgid "Resolved address \"%s\" to a read-only configuration source at position %d"
msgstr "地址“%s”解析为位于 %d 的只读配置源"

#: ../gconf/gconf-sources.c:424
#, c-format
msgid "Resolved address \"%s\" to a partially writable config source at position %d"
msgstr "解析的地址“%s”指向位于 %d 的部分可写入配置源"

#: ../gconf/gconf-sources.c:433
msgid "None of the resolved addresses are writable; saving configuration settings will not be possible"
msgstr "没有一个解析的地址可以写入；将无法保存配置设置"

#: ../gconf/gconf-sources.c:650
#, c-format
msgid "Schema `%s' specified for `%s' stores a non-schema value"
msgstr "为“%s”指定的 schema “%s”存储了非 schema 值"

#: ../gconf/gconf-sources.c:712
msgid "The '/' name can only be a directory, not a key"
msgstr "“/”名称只能是目录，不能是键"

#: ../gconf/gconf-sources.c:754
#, c-format
msgid "Value for `%s' set in a read-only source at the front of your configuration path"
msgstr "“%s”的值设置在您的配置路径前面的只读源中"

#: ../gconf/gconf-sources.c:766
#, c-format
msgid "Unable to store a value at key '%s', as the configuration server has no writable databases. There are some common causes of this problem: 1) your configuration path file %s/path doesn't contain any databases or wasn't found 2) somehow we mistakenly created two gconfd processes 3) your operating system is misconfigured so NFS file locking doesn't work in your home directory or 4) your NFS client machine crashed and didn't properly notify the server on reboot that file locks should be dropped. If you have two gconfd processes (or had two at the time the second was launched), logging out, killing all copies of gconfd, and logging back in may help. If you have stale locks, remove ~/.gconf*/*lock. Perhaps the problem is that you attempted to use GConf from two machines at once, and ORBit still has its default configuration that prevents remote CORBA connections - put \"ORBIIOPIPv4=1\" in /etc/orbitrc. As always, check the user.* syslog for details on problems gconfd encountered. There can only be one gconfd per home directory, and it must own a lockfile in ~/.gconfd and also lockfiles in individual storage locations such as ~/.gconf"
msgstr "无法以键“%s”存储值，因为配置服务器没有可写入数据库。该问题的常见原因如下：1) 您的配置路径文件 %s/path 不包含任何数据库或者没有 找到该文件 2) 可能由于某些原因错误地创建了两个 gconfd 进程 3) 您的操作系统配置错误，所以 NFS 文件锁定在您的主目录中不起作用或者 4) 您的 NFS 客户机崩溃并在重新启动时没有正确通知服务器应删除文件锁定。如果您有两个gconfd 进程(或在第二个进程启动时曾有两个进程)，注销、杀死 gconfd 的所有副本，然后再重新登录可能会有帮助。如果您的锁定已失效，删除 ~/.gconf*/*lock。可能问题是您尝试从两台计算机同时使用 GConf，而 ORBit 仍然使用阻止远程 CORBA 连接的默认配置 - 将 \"ORBIIOPIPv4=1\" 放入 /etc/orbitrc 目录中。并且一定要检查 user.* syslog 了解有关 gconfd 遇到的问题的详细信息。每个主目录只能有一个 gconfd 进程，并且该进程必须在 ~/.gconfd 中拥有一个锁定文件，并在各个存储位置，如 ~/.gconf 中拥有锁定文件"

#: ../gconf/gconf-sources.c:1570
#, c-format
msgid "Error finding metainfo: %s"
msgstr "查找元信息时出错：%s"

#: ../gconf/gconf-sources.c:1639
#, c-format
msgid "Error getting metainfo: %s"
msgstr "获取元信息时出错：%s"

#: ../gconf/gconf-sources.c:1663
#, c-format
msgid "Key `%s' listed as schema for key `%s' actually stores type `%s'"
msgstr "键“%s”(作为键“%s”的 schema 列出)实际存储的类型是“%s”"

#: ../gconf/gconf-value.c:263
#, c-format
msgid "Didn't understand `%s' (list must start with a '[')"
msgstr "不理解“%s”(列表必须以“[”开头)"

#: ../gconf/gconf-value.c:276
#, c-format
msgid "Didn't understand `%s' (list must end with a ']')"
msgstr "不理解“%s”(列表必须以“]”结束)"

#: ../gconf/gconf-value.c:327
#, c-format
msgid "Didn't understand `%s' (extra unescaped ']' found inside list)"
msgstr "不理解“%s”(在列表中出现多余的非换码字符“]”)"

#: ../gconf/gconf-value.c:358
#: ../gconf/gconf-value.c:519
#, c-format
msgid "Didn't understand `%s' (extra trailing characters)"
msgstr "不理解“%s”(多余的结尾字符)"

#: ../gconf/gconf-value.c:405
#, c-format
msgid "Didn't understand `%s' (pair must start with a '(')"
msgstr "不理解“%s”(pair 必须以“(”开头)"

#: ../gconf/gconf-value.c:418
#, c-format
msgid "Didn't understand `%s' (pair must end with a ')')"
msgstr "不理解“%s”(pair 必须以“)”结束)"

#: ../gconf/gconf-value.c:448
#: ../gconf/gconf-value.c:534
#, c-format
msgid "Didn't understand `%s' (wrong number of elements)"
msgstr "不理解“%s”(元素数不正确)"

#: ../gconf/gconf-value.c:488
#, c-format
msgid "Didn't understand `%s' (extra unescaped ')' found inside pair)"
msgstr "不理解“%s”(在 pair 中找到多余的非换码字符“)”)"

#: ../gconf/gconf.c:95
msgid "Key is NULL"
msgstr "键为 NULL"

#: ../gconf/gconf.c:102
#, c-format
msgid "\"%s\": %s"
msgstr "“%s”：%s"

#: ../gconf/gconf.c:423
#, c-format
msgid "Server couldn't resolve the address `%s'"
msgstr "服务器无法解析地址“%s”"

#: ../gconf/gconf.c:801
msgid "Can't add notifications to a local configuration source"
msgstr "无法将通知添加到本地配置源"

#: ../gconf/gconf.c:2251
#, c-format
msgid "Adding client to server's list failed, CORBA error: %s"
msgstr "将客户机添加到服务器列表失败，CORBA 错误：%s"

#: ../gconf/gconf.c:2623
msgid "Must begin with a slash (/)"
msgstr "必须以斜杠 (/) 开头"

#: ../gconf/gconf.c:2645
msgid "Can't have two slashes (/) in a row"
msgstr "一行不能有两个斜杠 (/)"

#: ../gconf/gconf.c:2647
msgid "Can't have a period (.) right after a slash (/)"
msgstr "斜杠 (/) 后不能紧跟句号 (.)"

#: ../gconf/gconf.c:2667
#, c-format
msgid "'\\%o' is not an ASCII character, so isn't allowed in key names"
msgstr "'\\%o' 不是 ASCII 字符，所以不允许出现在键名称中"

#: ../gconf/gconf.c:2677
#, c-format
msgid "`%c' is an invalid character in key/directory names"
msgstr "“%c”在键/目录名称中是无效字符"

#: ../gconf/gconf.c:2691
msgid "Key/directory may not end with a slash (/)"
msgstr "键/目录不能以斜杠 (/) 结束"

#: ../gconf/gconf.c:3062
#, c-format
msgid "Failure shutting down config server: %s"
msgstr "关闭配置服务器时出现故障：%s"

#: ../gconf/gconf.c:3123
#, c-format
msgid "Expected float, got %s"
msgstr "需要浮点数，得到的值为 %s"

#: ../gconf/gconf.c:3158
#, c-format
msgid "Expected int, got %s"
msgstr "需要整数，得到的值为 %s"

#: ../gconf/gconf.c:3193
#, c-format
msgid "Expected string, got %s"
msgstr "需要字符串，得到的值为 %s"

#: ../gconf/gconf.c:3227
#, c-format
msgid "Expected bool, got %s"
msgstr "需要布尔值，得到的值为 %s"

#: ../gconf/gconf.c:3260
#, c-format
msgid "Expected schema, got %s"
msgstr "需要 schema ，得到的值为 %s"

#: ../gconf/gconf.c:3599
#, c-format
msgid "CORBA error: %s"
msgstr "CORBA 错误：%s"

#: ../gconf/gconfd.c:302
msgid "Shutdown request received"
msgstr "已接收到关闭请求"

#: ../gconf/gconfd.c:334
msgid "gconfd compiled with debugging; trying to load gconf.path from the source directory"
msgstr "gconfd 用调试编译；尝试从源目录载入gconf.path"

#: ../gconf/gconfd.c:354
#, c-format
msgid "No configuration files found, trying to use the default config source `%s'"
msgstr "找不到配置文件，尝试使用默认配置源“%s”"

#. We want to stay alive but do nothing, because otherwise every
#. request would result in another failed gconfd being spawned.
#.
#: ../gconf/gconfd.c:362
#, c-format
msgid "No configuration sources in the source path, configuration won't be saved; edit %s%s"
msgstr "源路径中没有配置源，配置不会保存；请编辑 %s%s"

#: ../gconf/gconfd.c:375
#, c-format
msgid "Error loading some config sources: %s"
msgstr "载入某些配置源时出错：%s"

#: ../gconf/gconfd.c:387
msgid "No config source addresses successfully resolved, can't load or store config data"
msgstr "配置源地址无一解析成功，无法载入或存储配置数据"

#: ../gconf/gconfd.c:404
msgid "No writable config sources successfully resolved, may not be able to save some configuration changes"
msgstr "可写入配置源无一解析成功，可能无法保存某些配置更改"

#: ../gconf/gconfd.c:433
#, c-format
msgid "Received signal %d, dumping core. Please report a GConf bug."
msgstr "已接收到信号 %d，正在转储核心文件。请报告一个 GConf 问题。"

#: ../gconf/gconfd.c:439
#, c-format
msgid "Received signal %d. Please report a GConf bug."
msgstr "收到了信号 %d。请报告一个 GConf 问题。"

#: ../gconf/gconfd.c:459
#, c-format
msgid "Received signal %d, shutting down abnormally. Please file a GConf bug report."
msgstr "收到了信号 %d，正在异常关闭。请将 GConf 问题记入报告。"

#: ../gconf/gconfd.c:475
#, c-format
msgid "Received signal %d, shutting down cleanly"
msgstr "已接收到信号 %d，正在干净地关闭"

#: ../gconf/gconfd.c:563
#, c-format
msgid "Failed to open %s: %s"
msgstr "打开 %s 失败：%s"

#: ../gconf/gconfd.c:579
#, c-format
msgid "Owner of %s is not the current user"
msgstr "%s 的所有者并非当前用户"

#: ../gconf/gconfd.c:587
#, c-format
msgid "Bad permissions %lo on directory %s"
msgstr "目录 %2$s 的权限 %1$lo 有错"

#. openlog() does not copy logname - what total brokenness.
#. So we free it at the end of main()
#: ../gconf/gconfd.c:679
#, c-format
msgid "starting (version %s), pid %u user '%s'"
msgstr "正在启动(版本 %s)，pid %u 用户“%s”"

#: ../gconf/gconfd.c:736
msgid "Failed to get object reference for ConfigServer"
msgstr "获取 ConfigServer 的对象引用失败"

#: ../gconf/gconfd.c:749
#, c-format
msgid "Failed to create %s: %s"
msgstr "创建 %s 失败：%s"

#: ../gconf/gconfd.c:756
#, c-format
msgid "Directory %s has a problem, gconfd can't use it"
msgstr "目录 %s 有问题，gconfd 无法使用它"

#: ../gconf/gconfd.c:788
#, c-format
msgid "Failed to write byte to pipe file descriptor %d so client program may hang: %s"
msgstr "将字节写入管道文件描述符 %d 失败，所以客户端程序可能挂起：%s"

#: ../gconf/gconfd.c:798
#, c-format
msgid "Failed to get lock for daemon, exiting: %s"
msgstr "锁定守护进程失败，正在退出：%s"

#: ../gconf/gconfd.c:836
#, c-format
msgid "Error releasing lockfile: %s"
msgstr "释放锁定文件时出错：%s"

#: ../gconf/gconfd.c:844
msgid "Exiting"
msgstr "退出"

#: ../gconf/gconfd.c:869
msgid "SIGHUP received, reloading all databases"
msgstr "收到了 SIGHUP，重新装入全部数据库"

#: ../gconf/gconfd.c:886
msgid "GConf server is not in use, shutting down."
msgstr "GConf 服务器不在使用，正在关闭。"

#: ../gconf/gconfd.c:1212
#, c-format
msgid "Error obtaining new value for `%s': %s"
msgstr "获取“%s”的新值时发生错误：%s"

#: ../gconf/gconfd.c:1340
#, c-format
msgid "Returning exception: %s"
msgstr "返回异常：%s"

#: ../gconf/gconfd.c:1446
#, c-format
msgid "Failed to open gconfd logfile; won't be able to restore listeners after gconfd shutdown (%s)"
msgstr "打开 gconfd 日志文件失败；无法在gconfd 关闭后恢复监听程序 (%s)"

#: ../gconf/gconfd.c:1481
#, c-format
msgid "Failed to close gconfd logfile; data may not have been properly saved (%s)"
msgstr "关闭 gconfd 日志文件失败；数据可能没有正确保存 (%s)"

#: ../gconf/gconfd.c:1543
#, c-format
msgid "Could not open saved state file '%s' for writing: %s"
msgstr "无法打开已保存的状态文件“%s”进行写入：%s"

#: ../gconf/gconfd.c:1557
#, c-format
msgid "Could not write saved state file '%s' fd: %d: %s"
msgstr "无法写入已保存的状态文件“%s”fd：%d：%s"

#: ../gconf/gconfd.c:1566
#, c-format
msgid "Failed to close new saved state file '%s': %s"
msgstr "关闭新保存的状态文件“%s”失败：%s"

#: ../gconf/gconfd.c:1580
#, c-format
msgid "Could not move aside old saved state file '%s': %s"
msgstr "无法移走已保存的旧状态文件“%s”：%s"

#: ../gconf/gconfd.c:1590
#, c-format
msgid "Failed to move new save state file into place: %s"
msgstr "无法将新保存的状态文件移入位置：%s"

#: ../gconf/gconfd.c:1599
#, c-format
msgid "Failed to restore original saved state file that had been moved to '%s': %s"
msgstr "恢复已移动到“%s”的原保存的状态文件失败：%s"

#: ../gconf/gconfd.c:2078
#, c-format
msgid "Unable to restore a listener on address '%s', couldn't resolve the database"
msgstr "无法恢复地址“%s”上的监听程序，不能解析该数据库"

#: ../gconf/gconfd.c:2114
#, c-format
msgid "Error reading saved state file: %s"
msgstr "读取已保存的状态文件时出错：%s"

#: ../gconf/gconfd.c:2164
#, c-format
msgid "Unable to open saved state file '%s': %s"
msgstr "无法打开已保存的状态文件“%s”：%s"

#: ../gconf/gconfd.c:2283
#, c-format
msgid "Failed to log addition of listener to gconfd logfile; won't be able to re-add the listener if gconfd exits or shuts down (%s)"
msgstr "向 gconfd 日志文件记录添加监听程序失败；如果 gconfd 退出或关闭，将无法重新添加该监听程序 (%s)"

#: ../gconf/gconfd.c:2288
#, c-format
msgid "Failed to log removal of listener to gconfd logfile; might erroneously re-add the listener if gconfd exits or shuts down (%s)"
msgstr "从 gconfd 日志文件记录删除监听程序失败；如果 gconfd 退出或关闭，可能会错误地重新添加该监听程序 (%s)"

#: ../gconf/gconfd.c:2311
#: ../gconf/gconfd.c:2485
#, c-format
msgid "Failed to get IOR for client: %s"
msgstr "获得客户端的 IOR 失败：%s"

#: ../gconf/gconfd.c:2326
#, c-format
msgid "Failed to open saved state file: %s"
msgstr "打开已保存的状态文件失败：%s"

#: ../gconf/gconfd.c:2339
#, c-format
msgid "Failed to write client add to saved state file: %s"
msgstr "将客户端添加写入已保存的状态文件失败：%s"

#: ../gconf/gconfd.c:2347
#, c-format
msgid "Failed to flush client add to saved state file: %s"
msgstr "将客户端添加刷新到已保存的状态文件失败：%s"

#: ../gconf/gconfd.c:2446
msgid "Some client removed itself from the GConf server when it hadn't been added."
msgstr "当某个客户端未被添加时，它将自己从 GConf 服务器中删除。"

#: ../gconf/gconftool.c:90
msgid "Set a key to a value and sync. Use with --type."
msgstr "将键设置为值和同步。使用 --type。"

#: ../gconf/gconftool.c:99
msgid "Print the value of a key to standard output."
msgstr "将键的值显示到标准输出。"

#: ../gconf/gconftool.c:109
msgid "Unset the keys on the command line"
msgstr "取消命令行上的键设置"

#: ../gconf/gconftool.c:118
msgid "Recursively unset all keys at or below the key/directory names on the command line"
msgstr "递归取消设置命令行上该键/目录名称位置或以下的所有键"

#: ../gconf/gconftool.c:127
msgid "Print all key/value pairs in a directory."
msgstr "显示某个目录中的所有键/值对。"

#: ../gconf/gconftool.c:136
msgid "Print all subdirectories in a directory."
msgstr "显示某个目录下的所有子目录。"

#: ../gconf/gconftool.c:145
msgid "Print all subdirectories and entries under a directory, recursively."
msgstr "递归打印某个目录下的所有子目录和条目。"

#: ../gconf/gconftool.c:154
msgid "Search for a key, recursively."
msgstr "递归查找键"

#: ../gconf/gconftool.c:163
msgid "Get the short doc string for a key"
msgstr "获取键的短文档字符串"

#: ../gconf/gconftool.c:172
msgid "Get the long doc string for a key"
msgstr "获取键的长文档字符串"

#: ../gconf/gconftool.c:181
msgid "Return 0 if the directory exists, 2 if it does not."
msgstr "如果该目录存在，返回 0，如果不存在，返回 2。"

#: ../gconf/gconftool.c:190
msgid "Ignore schema defaults when reading values."
msgstr "读取值示忽略 schema 默认值。"

#: ../gconf/gconftool.c:205
msgid "Dump to standard output an XML description of all entries under a directory, recursively."
msgstr "递归将目录下所有项的 XML 描述转存到标准输出。"

#: ../gconf/gconftool.c:214
msgid "Load from the specified file an XML description of values and set them relative to a directory."
msgstr "从指定文件中装入值的 XML 描述，并将其相对于目录进行设定。"

#: ../gconf/gconftool.c:223
msgid "Unload a set of values described in an XML file."
msgstr "卸装 XML 文件中描述的值集。"

#: ../gconf/gconftool.c:238
msgid "Get the name of the default source"
msgstr "获取默认源的名称"

#: ../gconf/gconftool.c:247
msgid "Shut down gconfd. DON'T USE THIS OPTION WITHOUT GOOD REASON."
msgstr "关闭 gconfd。如无必要，请勿使用该选项。"

#: ../gconf/gconftool.c:256
msgid "Return 0 if gconfd is running, 2 if not."
msgstr "如果 gconfd 正在运行，返回 0，否则返回 2。"

#: ../gconf/gconftool.c:265
msgid "Launch the config server (gconfd). (Normally happens automatically when needed.)"
msgstr "启动该配置服务器 (gconfd)。(当需要时通常会自动启动。)"

#: ../gconf/gconftool.c:280
msgid "Specify the type of the value being set, or the type of the value a schema describes. Unique abbreviations OK."
msgstr "指定正在设置的值的类型，或 schema 描述的值的类型。可使用唯一的缩写词。"

#: ../gconf/gconftool.c:281
msgid "int|bool|float|string|list|pair"
msgstr "int|bool|float|string|list|pair"

#: ../gconf/gconftool.c:289
msgid "Print the data type of a key to standard output."
msgstr "将键的数据类型打印到标准输出。"

#: ../gconf/gconftool.c:298
msgid "Get the number of elements in a list key."
msgstr "获取列表键的元素编号。"

#: ../gconf/gconftool.c:307
msgid "Get a specific element from a list key, numerically indexed."
msgstr "从列表键中获取指定元素，以数字作为索引。"

#: ../gconf/gconftool.c:316
msgid "Specify the type of the list value being set, or the type of the value a schema describes. Unique abbreviations OK."
msgstr "指定正在设置的列表值的类型，或 schema 描述的值的类型。可使用唯一的缩写词。"

#: ../gconf/gconftool.c:317
#: ../gconf/gconftool.c:326
#: ../gconf/gconftool.c:335
msgid "int|bool|float|string"
msgstr "int|bool|float|string"

#: ../gconf/gconftool.c:325
msgid "Specify the type of the car pair value being set, or the type of the value a schema describes. Unique abbreviations OK."
msgstr "指定正在设置的 car pair 值的类型，或 schema 描述的值的类型。可使用唯一的缩写词。"

#: ../gconf/gconftool.c:334
msgid "Specify the type of the cdr pair value being set, or the type of the value a schema describes. Unique abbreviations OK."
msgstr "指定正在设置的 cdr pair 值的类型，或 schema 描述的值的类型。可使用唯一的缩写词。"

#: ../gconf/gconftool.c:349
msgid "Specify a schema file to be installed"
msgstr "指定要安装的 schema 文件"

#: ../gconf/gconftool.c:350
msgid "FILENAME"
msgstr "文件名"

#: ../gconf/gconftool.c:358
msgid "Specify a configuration source to use rather than the default path"
msgstr "指定要使用的配置源，而不是默认路径"

#: ../gconf/gconftool.c:359
msgid "SOURCE"
msgstr "源"

#: ../gconf/gconftool.c:367
msgid "Access the config database directly, bypassing server. Requires that gconfd is not running."
msgstr "绕过服务器，直接访问配置数据库。要求 gconfd 不在运行。"

#: ../gconf/gconftool.c:376
msgid "Properly installs schema files on the command line into the database. GCONF_CONFIG_SOURCE environment variable should be set to a non-default config source or set to the empty string to use the default."
msgstr "在命令行上将 schema 文件正确安装到数据库中。要使用默认值，GCONF_CONFIG_SOURCE 环境变量应设置为非默认配置源或设置为空字符串。"

#: ../gconf/gconftool.c:385
msgid "Properly uninstalls schema files on the command line from the database. GCONF_CONFIG_SOURCE environment variable should be set to a non-default config source or set to the empty string to use the default."
msgstr "在命令行上将 schema 文件正确从数据库中卸载。要使用默认值，GCONF_CONFIG_SOURCE 环境变量应设置为非默认配置源或设置为空字符串。"

#: ../gconf/gconftool.c:400
msgid "Torture-test an application by setting and unsetting a bunch of values of different types for keys on the command line."
msgstr "通过在命令行上为键设置和取消设置各种不同类型的值，对应用程序进行严格的测试。"

#: ../gconf/gconftool.c:409
msgid "Torture-test an application by setting and unsetting a bunch of keys inside the directories on the command line."
msgstr "通过在命令行上设置和取消设置目录中的一系列键，对应用程序进行严格的测试。"

#: ../gconf/gconftool.c:424
msgid "Set a schema and sync. Use with --short-desc, --long-desc, --owner, and --type."
msgstr "设置 schema 和同步。使用 --short-desc、--long-desc、--owner 和 --type。"

#: ../gconf/gconftool.c:433
msgid "Specify a short half-line description to go in a schema."
msgstr "指定 schema 中使用的一条简短的半行说明。"

#: ../gconf/gconftool.c:434
#: ../gconf/gconftool.c:443
msgid "DESCRIPTION"
msgstr "说明"

#: ../gconf/gconftool.c:442
msgid "Specify a several-line description to go in a schema."
msgstr "指定 schema 中使用的一条多行说明。"

#: ../gconf/gconftool.c:451
msgid "Specify the owner of a schema"
msgstr "指定 schema 的所有者"

#: ../gconf/gconftool.c:452
msgid "OWNER"
msgstr "所有者"

#: ../gconf/gconftool.c:460
msgid "Get the name of the schema applied to this key"
msgstr "获取要应用于此键的 schema 名称"

#: ../gconf/gconftool.c:469
msgid "Specify the schema name followed by the key to apply the schema name to"
msgstr "指定 schema 名，后面跟着要应用该 schema 名的键"

#: ../gconf/gconftool.c:478
msgid "Remove any schema name applied to the given keys"
msgstr "删除所有已应用于指定键的 schema 名"

#: ../gconf/gconftool.c:493
msgid "Print version"
msgstr "显示版本"

#: ../gconf/gconftool.c:502
msgid "[FILE...]|[KEY...]|[DIR...]"
msgstr "[文件...]|[键...]|[目录...]"

#: ../gconf/gconftool.c:562
msgid "- Tool to manipulate a GConf configuration"
msgstr "- 用于修改 GConf 配置的工具"

#: ../gconf/gconftool.c:567
msgid "Client options:"
msgstr "客户端选项："

#: ../gconf/gconftool.c:567
msgid "Show client options"
msgstr "显示客户端选项"

#: ../gconf/gconftool.c:572
msgid "Key type options:"
msgstr "键类型选项："

#: ../gconf/gconftool.c:572
msgid "Show key type options"
msgstr "显示键类型选项"

#: ../gconf/gconftool.c:577
msgid "Load/Save options:"
msgstr "载入/保存选项："

#: ../gconf/gconftool.c:577
msgid "Show load/save options"
msgstr "显示载入/保存选项"

#: ../gconf/gconftool.c:582
msgid "Server options:"
msgstr "服务器选项："

#: ../gconf/gconftool.c:582
msgid "Show server options"
msgstr "显示服务器选项"

#: ../gconf/gconftool.c:587
msgid "Installation options:"
msgstr "安装选项："

#: ../gconf/gconftool.c:587
msgid "Show installation options"
msgstr "显示安装选项"

#: ../gconf/gconftool.c:592
msgid "Test options:"
msgstr "测试选项："

#: ../gconf/gconftool.c:592
msgid "Show test options"
msgstr "显示测试选项"

#: ../gconf/gconftool.c:597
msgid "Schema options:"
msgstr "Schema 选项："

#: ../gconf/gconftool.c:597
msgid "Show schema options"
msgstr "显示 schema 选项"

#: ../gconf/gconftool.c:606
#, c-format
msgid "Run '%s --help' to see a full list of available command line options.\n"
msgstr "运行“%s --help”可查看可用命令行选项的完整列表。\n"

#: ../gconf/gconftool.c:634
msgid "Can't get and set/unset simultaneously\n"
msgstr "不能同时进行获取和设置/取消设置操作\n"

#: ../gconf/gconftool.c:644
msgid "Can't set and get/unset simultaneously\n"
msgstr "不能同时进行设置和获取/取消设置操作\n"

#: ../gconf/gconftool.c:651
msgid "Can't get type and set/unset simultaneously\n"
msgstr "不能同时进行获取类型和设置/取消设置操作\n"

#: ../gconf/gconftool.c:662
msgid "Can't use --all-entries with --get or --set\n"
msgstr "不能将 --all-entries 用于 --get 或 --set\n"

#: ../gconf/gconftool.c:673
msgid "Can't use --all-dirs with --get or --set\n"
msgstr "不能将 --all-dirs 用于 --get 或 --set\n"

#: ../gconf/gconftool.c:687
msgid "--recursive-list should not be used with --get, --set, --unset, --all-entries, --all-dirs, or --search-key\n"
msgstr "--recursive-list 不应用于 --get、--set、--unset、--all-entries、--all-dirs 或 --search-key\n"

#: ../gconf/gconftool.c:701
msgid "--set_schema should not be used with --get, --set, --unset, --all-entries, --all-dirs, or --search-key\n"
msgstr "--set_schema 不应用于 --get、--set、--unset、--all-entries、--all-dirs 或 --search-key\n"

#: ../gconf/gconftool.c:707
msgid "Value type is only relevant when setting a value\n"
msgstr "只有在设置值时，值类型才有关系\n"

#: ../gconf/gconftool.c:713
msgid "Must specify a type when setting a value\n"
msgstr "当设置值时，必须指定值类型\n"

#: ../gconf/gconftool.c:721
msgid "--ignore-schema-defaults is only relevant with --get, --all-entries, --dump, --recursive-list, --get-list-size or --get-list-element\n"
msgstr "--ignore-schema-defaults 只相对于 --get、--all-entries、--dump、--recursive-list、--get-list-size 或 --get-list-element\n"

#: ../gconf/gconftool.c:733
#: ../gconf/gconftool.c:746
#: ../gconf/gconftool.c:759
#: ../gconf/gconftool.c:773
#: ../gconf/gconftool.c:786
#: ../gconf/gconftool.c:799
#: ../gconf/gconftool.c:813
#, c-format
msgid "%s option must be used by itself.\n"
msgstr "%s 选项必须单独使用。\n"

#: ../gconf/gconftool.c:822
msgid "You must specify a config source with --config-source when using --direct\n"
msgstr "当使用 --direct 时，必须用 --config-source 指定配置源\n"

#: ../gconf/gconftool.c:828
#, c-format
msgid "Failed to init GConf: %s\n"
msgstr "初始化 GConf 失败：%s\n"

#: ../gconf/gconftool.c:856
msgid "GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL is set, not installing schemas\n"
msgstr "GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL 已设置，不再安装 schema\n"

#: ../gconf/gconftool.c:863
msgid "GCONF_DISABLE_MAKEFILE_SCHEMA_UNINSTALL is set, not uninstalling schemas\n"
msgstr "GCONF_DISABLE_MAKEFILE_SCHEMA_UNINSTALL 已设置，不再卸载 schema\n"

#: ../gconf/gconftool.c:876
msgid "Must set the GCONF_CONFIG_SOURCE environment variable\n"
msgstr "必须设置 GCONF_CONFIG_SOURCE 环境变量\n"

#: ../gconf/gconftool.c:911
#, c-format
msgid "Failed to access configuration source(s): %s\n"
msgstr "访问配置源失败：%s\n"

#: ../gconf/gconftool.c:1198
#, c-format
msgid "Shutdown error: %s\n"
msgstr "关闭错误：%s\n"

#: ../gconf/gconftool.c:1241
msgid "Must specify one or more directories to recursively list.\n"
msgstr "必须要指定递归列出的一个或多个目录。\n"

#: ../gconf/gconftool.c:1272
#: ../gconf/gconftool.c:1433
#: ../gconf/gconftool.c:1699
#, c-format
msgid "Failure listing entries in `%s': %s\n"
msgstr "列出“%s”中的条目时发生错误：%s\n"

#: ../gconf/gconftool.c:1292
#: ../gconf/gconftool.c:1452
msgid "(no value set)"
msgstr "(没有设置值)"

#: ../gconf/gconftool.c:1342
msgid "Must specify a key pattern to search for.\n"
msgstr "必须指定待搜索的键的模式。\n"

#: ../gconf/gconftool.c:1391
msgid "Must specify one or more directories to dump.\n"
msgstr "必须指定要转存的一个或多个目录。\n"

#: ../gconf/gconftool.c:1758
#, c-format
msgid "Failed to spawn the config server (gconfd): %s\n"
msgstr "产生配置服务器(gconfd)失败：%s\n"

#: ../gconf/gconftool.c:1787
msgid "Must specify a key or keys to get\n"
msgstr "必须指定要获取的键或多个键\n"

#: ../gconf/gconftool.c:1822
#, c-format
msgid "Type: %s\n"
msgstr "类型：%s\n"

#: ../gconf/gconftool.c:1823
#, c-format
msgid "List Type: %s\n"
msgstr "列表类型：%s\n"

#: ../gconf/gconftool.c:1824
#, c-format
msgid "Car Type: %s\n"
msgstr "Car 类型：%s\n"

#: ../gconf/gconftool.c:1825
#, c-format
msgid "Cdr Type: %s\n"
msgstr "Cdr 类型：%s\n"

#: ../gconf/gconftool.c:1830
#, c-format
msgid "Default Value: %s\n"
msgstr "默认值：%s\n"

#: ../gconf/gconftool.c:1830
#: ../gconf/gconftool.c:1832
#: ../gconf/gconftool.c:1833
#: ../gconf/gconftool.c:1834
msgid "Unset"
msgstr "清除"

#: ../gconf/gconftool.c:1832
#, c-format
msgid "Owner: %s\n"
msgstr "所有者：%s\n"

#: ../gconf/gconftool.c:1833
#, c-format
msgid "Short Desc: %s\n"
msgstr "简单说明：%s\n"

#: ../gconf/gconftool.c:1834
#, c-format
msgid "Long Desc: %s\n"
msgstr "详细说明：%s\n"

#: ../gconf/gconftool.c:1843
#: ../gconf/gconftool.c:2067
#: ../gconf/gconftool.c:2101
#: ../gconf/gconftool.c:2146
#: ../gconf/gconftool.c:2291
#, c-format
msgid "No value set for `%s'\n"
msgstr "没有为“%s”设置值\n"

#: ../gconf/gconftool.c:1847
#: ../gconf/gconftool.c:2071
#: ../gconf/gconftool.c:2105
#: ../gconf/gconftool.c:2150
#: ../gconf/gconftool.c:2295
#, c-format
msgid "Failed to get value for `%s': %s\n"
msgstr "获取“%s”的值失败：%s\n"

#: ../gconf/gconftool.c:1890
#: ../gconf/gconftool.c:1902
#, c-format
msgid "Don't understand type `%s'\n"
msgstr "不理解类型“%s”\n"

#: ../gconf/gconftool.c:1914
msgid "Must specify alternating keys/values as arguments\n"
msgstr "必须将替代键/值指定为参数\n"

#: ../gconf/gconftool.c:1934
#, c-format
msgid "No value to set for key: `%s'\n"
msgstr "没有可为键“%s”设置的值\n"

#: ../gconf/gconftool.c:1962
msgid "Cannot set schema as value\n"
msgstr "无法将 schema 设置为值\n"

#: ../gconf/gconftool.c:1972
msgid "When setting a list you must specify a primitive list-type\n"
msgstr "当设置列表时，您必须指定简单的 list-type\n"

#: ../gconf/gconftool.c:1986
msgid "When setting a pair you must specify a primitive car-type and cdr-type\n"
msgstr "当设置 pair 时，您必须指定基本的 car-type 和 cdr-type\n"

#: ../gconf/gconftool.c:2001
#, c-format
msgid "Error: %s\n"
msgstr "错误：%s\n"

#: ../gconf/gconftool.c:2014
#: ../gconf/gconftool.c:3046
#, c-format
msgid "Error setting value: %s\n"
msgstr "设置值时发生错误：%s\n"

#: ../gconf/gconftool.c:2032
#, c-format
msgid "Error syncing: %s\n"
msgstr "同步时发生错误：%s\n"

#: ../gconf/gconftool.c:2047
msgid "Must specify a key or keys to get type\n"
msgstr "必须指定要获取类型的键\n"

#: ../gconf/gconftool.c:2091
msgid "Must specify a key to lookup size of.\n"
msgstr "必须指定要查阅大小的键。\n"

#: ../gconf/gconftool.c:2116
#: ../gconf/gconftool.c:2161
#, c-format
msgid "Key %s is not a list.\n"
msgstr "键 %s 不是列表。\n"

#: ../gconf/gconftool.c:2136
msgid "Must specify a key from which to get list element.\n"
msgstr "必须指定要获取列表元素的键。\n"

#: ../gconf/gconftool.c:2167
msgid "Must specify list index.\n"
msgstr "必须指定列表索引。\n"

#: ../gconf/gconftool.c:2174
msgid "List index must be non-negative.\n"
msgstr "列表索引必须是非负。\n"

#: ../gconf/gconftool.c:2183
msgid "List index is out of bounds.\n"
msgstr "列表索引超出范围。\n"

#: ../gconf/gconftool.c:2209
msgid "Must specify a key or keys on the command line\n"
msgstr "必须在命令行上指定一个或多个键\n"

#: ../gconf/gconftool.c:2229
#, c-format
msgid "No schema known for `%s'\n"
msgstr "没有已知的 schema 用于“%s”\n"

#: ../gconf/gconftool.c:2262
#, c-format
msgid "No doc string stored in schema at '%s'\n"
msgstr "没有文档字符串存储在模式的“%s”处\n"

#: ../gconf/gconftool.c:2267
#, c-format
msgid "Error getting schema at '%s': %s\n"
msgstr "在“%s”获取 schema 时发生错误：%s\n"

#: ../gconf/gconftool.c:2274
#, c-format
msgid "No schema stored at '%s'\n"
msgstr "没有模式存储在“%s”\n"

#: ../gconf/gconftool.c:2277
#, c-format
msgid "Value at '%s' is not a schema\n"
msgstr "“%s”处的值不是模式\n"

#: ../gconf/gconftool.c:2333
msgid "Must specify a schema name followed by the key name to apply it to\n"
msgstr "必须指定模式名，后面跟着要应用该模式名的键名称\n"

#: ../gconf/gconftool.c:2340
#, c-format
msgid "Error associating schema name '%s' with key name '%s': %s\n"
msgstr "将模式名“%s”与键名“%s”关联时出错：%s\n"

#: ../gconf/gconftool.c:2358
msgid "Must specify keys to unapply schema from\n"
msgstr "必须指定要取消应用 schema 的键\n"

#: ../gconf/gconftool.c:2368
#, c-format
msgid "Error removing schema name from '%s': %s\n"
msgstr "从“%s”删除模式名时出错：%s\n"

#: ../gconf/gconftool.c:2393
msgid "Must specify key (schema name) as the only argument\n"
msgstr "必须将键(模式名)指定为唯一的参数\n"

#: ../gconf/gconftool.c:2435
msgid "List type must be a primitive type: string, int, float or bool\n"
msgstr "List 类型必须是一种基本类型：string、int、float 或 bool\n"

#: ../gconf/gconftool.c:2455
msgid "Pair car type must be a primitive type: string, int, float or bool\n"
msgstr "Pair car 类型必须是一种基本类型：string、int、float 或 bool\n"

#: ../gconf/gconftool.c:2475
msgid "Pair cdr type must be a primitive type: string, int, float or bool\n"
msgstr "Pair cdr 类型必须是一种基本类型：string、int、float 或 bool\n"

#: ../gconf/gconftool.c:2490
#, c-format
msgid "Error setting value: %s"
msgstr "设置值时发生错误：%s"

#: ../gconf/gconftool.c:2504
#, c-format
msgid "Error syncing: %s"
msgstr "同步时发生错误：%s"

#: ../gconf/gconftool.c:2519
msgid "Must specify one or more directories to get key/value pairs from.\n"
msgstr "必须指定一个或多个要从其中获得键/值对的目录。\n"

#: ../gconf/gconftool.c:2533
msgid "Must specify one or more keys to unset.\n"
msgstr "必须指定一个或多个要取消设置的键。\n"

#: ../gconf/gconftool.c:2544
#, c-format
msgid "Error unsetting `%s': %s\n"
msgstr "取消设置“%s”时出错：%s\n"

#: ../gconf/gconftool.c:2564
msgid "Must specify one or more keys to recursively unset.\n"
msgstr "必须指定一个或多个要递归取消设置的键。\n"

#: ../gconf/gconftool.c:2578
#, c-format
msgid "Failure during recursive unset of \"%s\": %s\n"
msgstr "在递归取消设置“%s”时失败：%s\n"

#: ../gconf/gconftool.c:2598
msgid "Must specify one or more directories to get subdirs from.\n"
msgstr "必须指定要获取子目录的一个或多个目录。\n"

#: ../gconf/gconftool.c:2632
#, c-format
msgid "Error listing dirs: %s\n"
msgstr "列目录时错误：%s\n"

#: ../gconf/gconftool.c:2768
msgid "WARNING: must specify both a <car> and a <cdr> in a <pair>\n"
msgstr "警告：必须在 <pair> 中同时指定 <car> 和 <cdr>\n"

#: ../gconf/gconftool.c:2795
#, c-format
msgid "WARNING: key specified (%s) for schema under a <value> - ignoring\n"
msgstr "警告：在 <value> 下为 schema 指定的键(%s) - 忽略\n"

#: ../gconf/gconftool.c:2828
msgid "WARNING: must have a child node under <value>\n"
msgstr "警告：必须在 <value> 下有子节点\n"

#: ../gconf/gconftool.c:2834
#, c-format
msgid "WARNING: node <%s> not understood\n"
msgstr "警告：无法理解节点 <%s>\n"

#: ../gconf/gconftool.c:2852
#, c-format
msgid "WARNING: Failed to parse int value `%s'\n"
msgstr "警告：解析整数值“%s”失败\n"

#: ../gconf/gconftool.c:2873
#, c-format
msgid "WARNING: Failed to parse float value `%s'\n"
msgstr "警告：解析浮点值“%s”失败\n"

#: ../gconf/gconftool.c:2895
#, c-format
msgid "WARNING: Failed to parse string value `%s'\n"
msgstr "警告：处理字符串值“%s”失败\n"

#: ../gconf/gconftool.c:2916
#, c-format
msgid "WARNING: Failed to parse boolean value `%s'\n"
msgstr "警告：解析布尔值“%s”失败\n"

#: ../gconf/gconftool.c:3025
#: ../gconf/gconftool.c:3567
#, c-format
msgid "WARNING: failed to associate schema `%s' with key `%s': %s\n"
msgstr "警告：将 schema “%s”关联到键“%s”失败：%s\n"

#: ../gconf/gconftool.c:3140
#, c-format
msgid "WARNING: invalid or missing type for schema (%s)\n"
msgstr "警告：schema (%s) 的类型无效或缺少\n"

#: ../gconf/gconftool.c:3149
#, c-format
msgid "WARNING: invalid or missing list_type for schema (%s)\n"
msgstr "警告：schema (%s) 的 list_type 无效或缺少\n"

#: ../gconf/gconftool.c:3160
#: ../gconf/gconftool.c:3190
#: ../gconf/gconftool.c:3219
#, c-format
msgid "WARNING: Failed to parse default value `%s' for schema (%s)\n"
msgstr "警告：解析 schema (%s) 的默认值“%s”失败\n"

#: ../gconf/gconftool.c:3178
#, c-format
msgid "WARNING: invalid or missing car_type or cdr_type for schema (%s)\n"
msgstr "警告：schema (%s) car_type 或 cdr_type 无效或缺少 \n"

#: ../gconf/gconftool.c:3203
msgid "WARNING: You cannot set a default value for a schema\n"
msgstr "警告：您无法为 schema 设置默认值\n"

#: ../gconf/gconftool.c:3232
msgid "WARNING: gconftool internal error, unknown GConfValueType\n"
msgstr "警告：gconftool 内部错误，未知的 GConfValueType\n"

#: ../gconf/gconftool.c:3280
#: ../gconf/gconftool.c:3301
#: ../gconf/gconftool.c:3322
#: ../gconf/gconftool.c:3343
#, c-format
msgid "WARNING: failed to parse type name `%s'\n"
msgstr "警告：解析类型名“%s”失败\n"

#: ../gconf/gconftool.c:3297
#, c-format
msgid "WARNING: list_type can only be int, float, string or bool and not `%s'\n"
msgstr "警告：list_type 只能是整型、浮点型、字符串或布尔型，不能是“%s”\n"

#: ../gconf/gconftool.c:3318
#, c-format
msgid "WARNING: car_type can only be int, float, string or bool and not `%s'\n"
msgstr "警告：car_type 只能是整型、浮点型、字符串或布尔型，不能是“%s”\n"

#: ../gconf/gconftool.c:3339
#, c-format
msgid "WARNING: cdr_type can only be int, float, string or bool and not `%s'\n"
msgstr "警告：cdr_type 只能是整型、浮点型、字符串或布尔型，不能是“%s”\n"

#: ../gconf/gconftool.c:3379
msgid "WARNING: empty <applyto> node"
msgstr "警告：空的 <applyto> 节点"

#: ../gconf/gconftool.c:3382
#: ../gconf/gconftool.c:3640
#, c-format
msgid "WARNING: node <%s> not understood below <schema>\n"
msgstr "警告：无法理解 <schema> 下的节点 <%s>\n"

#: ../gconf/gconftool.c:3393
msgid "WARNING: no <list_type> specified for schema of type list\n"
msgstr "警告：没有指定列表类型模式的 <list_type> 键\n"

#: ../gconf/gconftool.c:3399
msgid "WARNING: no <car_type> specified for schema of type pair\n"
msgstr "警告：没有指定成对类型模式的 <car_type> 键\n"

#: ../gconf/gconftool.c:3405
msgid "WARNING: no <cdr_type> specified for schema of type pair\n"
msgstr "警告：没有指定成对类型模式的 <cdr_type> 键\n"

#: ../gconf/gconftool.c:3434
msgid "WARNING: <locale> node has no `name=\"locale\"' attribute, ignoring\n"
msgstr "警告：<locale> 节点没有“name=\"locale\"”属性，忽略\n"

#: ../gconf/gconftool.c:3440
#, c-format
msgid "WARNING: multiple <locale> nodes for locale `%s', ignoring all past first\n"
msgstr "警告：区域设置“%s”有多个 <locale> 节点，忽略第一个后的所有节点\n"

#: ../gconf/gconftool.c:3538
#, c-format
msgid "WARNING: Invalid node <%s> in a <locale> node\n"
msgstr "警告：<locale> 节点中的节点 <%s> 无效\n"

#: ../gconf/gconftool.c:3575
#, c-format
msgid "Attached schema `%s' to key `%s'\n"
msgstr "将 schema “%s” 关联到键“%s”上\n"

#: ../gconf/gconftool.c:3649
msgid "You must have at least one <locale> entry in a <schema>\n"
msgstr "您在 <schema> 中必须至少有一个 <locale> 项\n"

#: ../gconf/gconftool.c:3684
#, c-format
msgid "WARNING: failed to install schema `%s' locale `%s': %s\n"
msgstr "警告：安装 schema“%s”失败，区域设置“%s”：%s\n"

#: ../gconf/gconftool.c:3692
#, c-format
msgid "Installed schema `%s' for locale `%s'\n"
msgstr "安装 schema “%s”，区域设置“%s”\n"

#: ../gconf/gconftool.c:3702
#, c-format
msgid "WARNING: failed to uninstall schema `%s' locale `%s': %s\n"
msgstr "警告：卸载 schema “%s”失败，区域设置“%s”：%s\n"

#: ../gconf/gconftool.c:3710
#, c-format
msgid "Uninstalled schema `%s' from locale `%s'\n"
msgstr "已经从区域“%2$s”中卸载了 schema “%1$s”\n"

#: ../gconf/gconftool.c:3748
msgid "WARNING: no key specified for schema\n"
msgstr "警告：没有指定 schema 的键\n"

#: ../gconf/gconftool.c:3789
#, c-format
msgid "WARNING: node <%s> not understood below <%s>\n"
msgstr "警告：无法理解 <%2$s> 下的节点 <%1$s>\n"

#: ../gconf/gconftool.c:3821
#, c-format
msgid "Failed to open `%s': %s\n"
msgstr "打开“%s”失败：%s\n"

#: ../gconf/gconftool.c:3828
#, c-format
msgid "Document `%s' is empty?\n"
msgstr "文档“%s”是空的？\n"

#: ../gconf/gconftool.c:3840
#, c-format
msgid "Document `%s' has the wrong type of root node (<%s>, should be <%s>)\n"
msgstr "文档“%s”的根节点类型错误(<%s>，应该是 <%s>)\n"

#: ../gconf/gconftool.c:3853
#, c-format
msgid "Document `%s' has no top level <%s> node\n"
msgstr "文档“%s”没有顶层 <%s> 节点\n"

#: ../gconf/gconftool.c:3867
#, c-format
msgid "WARNING: node <%s> below <%s> not understood\n"
msgstr "警告：无法理解位于 <%2$s> 下的节点 <%1$s>\n"

#: ../gconf/gconftool.c:3888
#, c-format
msgid "Error syncing config data: %s"
msgstr "在同步配置数据时发生错误：%s"

#: ../gconf/gconftool.c:3904
msgid "Must specify some schema files to install\n"
msgstr "必须指定要安装的 schema 文件\n"

#: ../gconf/gconftool.c:3932
#, c-format
msgid ""
"\n"
"%s\n"
msgstr ""
"\n"
"%s\n"

#: ../gconf/gconftool.c:3952
#, c-format
msgid "Failed to unset breakage key %s: %s\n"
msgstr "取消设置破坏键 %s 失败：%s\n"

#: ../gconf/gconftool.c:4078
msgid "Must specify some keys to break\n"
msgstr "必须指定一些要破坏的键\n"

#: ../gconf/gconftool.c:4084
#, c-format
msgid ""
"Trying to break your application by setting bad values for key:\n"
"  %s\n"
msgstr ""
"正在试图通过为键设置不正确的值来破坏您的应用程序：\n"
"  %s\n"

#: ../gconf/gconftool.c:4102
msgid "Must specify some directories to break\n"
msgstr "必须指定一些要破坏的目录\n"

#: ../gconf/gconftool.c:4121
#, c-format
msgid ""
"Trying to break your application by setting bad values for keys in directory:\n"
"  %s\n"
msgstr ""
"正在试图通过为目录中的键设置不正确的值来破坏您的应用程序：\n"
"  %s\n"