/**********************************************************************

	PC-style floppy disk controller emulation

	TODO:
		- check how the drive select from DOR register, and the drive select
		from the fdc are related !!!! 
		- if all drives do not have a disk in them, and the fdc is reset, is a int generated?
		(if yes, indicates drives are ready without discs, if no indicates no drives are ready)
		- status register a, status register b

**********************************************************************/

#include "machine/pc_fdc.h"
#include "machine/nec765.h"
#include "memconv.h"


/* if not 1, DACK and TC inputs to FDC are disabled, and DRQ and IRQ are held
 * at high impedance i.e they are not affective */
#define PC_FDC_FLAGS_DOR_DMA_ENABLED	(1<<3)
#define PC_FDC_FLAGS_DOR_FDC_ENABLED	(1<<2)
#define PC_FDC_FLAGS_DOR_MOTOR_ON		(1<<4)

#define LOG_FDC		0

/* registers etc */
struct pc_fdc
{
	int status_register_a;
	int status_register_b;
	int digital_output_register;
	int tape_drive_register;
	int data_rate_register;
	int digital_input_register;
	int configuration_control_register;

	/* stored tc state - state present at pins */
	int tc_state;
	/* stored dma drq state */
	int dma_state;
	int dma_read;
	/* stored int state */
	int int_state;

	struct pc_fdc_interface fdc_interface;
} pc_fdc;

static struct pc_fdc *fdc;

static void pc_fdc_hw_interrupt(int state);
static void pc_fdc_hw_dma_drq(int,int);
static mess_image *pc_fdc_get_image(int floppy_index);

static nec765_interface pc_fdc_nec765_interface = 
{
	pc_fdc_hw_interrupt,
	pc_fdc_hw_dma_drq,
	pc_fdc_get_image
};

static void pc_fdc_reset(void)
{
	/* setup reset condition */
	fdc->data_rate_register = 2;
	fdc->digital_output_register = 0;

	/* bit 7 is disk change */
	fdc->digital_input_register = 0x07f;

	nec765_reset(0);

	/* set FDC at reset */
	nec765_set_reset_state(1);
}



void pc_fdc_init(const struct pc_fdc_interface *iface)
{
	int i;
	mess_image *img;

	/* initialize fdc structure */
	fdc = auto_malloc(sizeof(*fdc));
	memset(fdc, 0, sizeof(*fdc));

	/* copy specified interface */
	if (iface)
		memcpy(&fdc->fdc_interface, iface, sizeof(fdc->fdc_interface));

	/* setup nec765 interface */
	nec765_init(&pc_fdc_nec765_interface, iface->nec765_type);

	pc_fdc_reset();

	for (i = 0; i < device_count(IO_FLOPPY); i++)
	{
		img = image_from_devtype_and_index(IO_FLOPPY, i);
		floppy_drive_set_geometry(img, FLOPPY_DRIVE_DS_80);
	}
}



static mess_image *pc_fdc_get_image(int floppy_index)
{
	mess_image *image = NULL;

	if (!fdc->fdc_interface.get_image)
	{
		if (floppy_index < device_count(IO_FLOPPY))
			image = image_from_devtype_and_index(IO_FLOPPY, floppy_index);
	}
	else
	{
		image = fdc->fdc_interface.get_image(floppy_index);
	}
	return image;
}



void pc_fdc_set_tc_state(int state)
{
	/* store state */
	fdc->tc_state = state;

	/* if dma is not enabled, tc's are not acknowledged */
	if ((fdc->digital_output_register & PC_FDC_FLAGS_DOR_DMA_ENABLED)!=0)
	{
		nec765_set_tc_state(state);
	}
}



void pc_fdc_hw_interrupt(int state)
{
	fdc->int_state = state;

	/* if dma is not enabled, irq's are masked */
	if ((fdc->digital_output_register & PC_FDC_FLAGS_DOR_DMA_ENABLED)==0)
		return;

	/* send irq */
	if (fdc->fdc_interface.pc_fdc_interrupt)
		fdc->fdc_interface.pc_fdc_interrupt(state);
}



int	pc_fdc_dack_r(void)
{
	int data;

	/* what is output if dack is not acknowledged? */
	data = 0x0ff;

	/* if dma is not enabled, dacks are not acknowledged */
	if ((fdc->digital_output_register & PC_FDC_FLAGS_DOR_DMA_ENABLED)!=0)
	{
		data = nec765_dack_r(0);
	}

	return data;
}



void pc_fdc_dack_w(int data)
{
	/* if dma is not enabled, dacks are not issued */
	if ((fdc->digital_output_register & PC_FDC_FLAGS_DOR_DMA_ENABLED)!=0)
	{
		/* dma acknowledge - and send byte to fdc */
		nec765_dack_w(0,data);
	}
}



void pc_fdc_hw_dma_drq(int state, int read_)
{
	fdc->dma_state = state;
	fdc->dma_read = read_;

	/* if dma is not enabled, drqs are masked */
	if ((fdc->digital_output_register & PC_FDC_FLAGS_DOR_DMA_ENABLED)==0)
		return;

	if (fdc->fdc_interface.pc_fdc_dma_drq)
		fdc->fdc_interface.pc_fdc_dma_drq(state, read_);
}



static void pc_fdc_data_rate_w(UINT8 data)
{
	if ((data & 0x080)!=0)
	{
		/* set ready state */
		nec765_set_ready_state(1);

		/* toggle reset state */
		nec765_set_reset_state(1);
 		nec765_set_reset_state(0);
	
		/* bit is self-clearing */
		data &= ~0x080;
	}

	fdc->data_rate_register = data;
}



/*	FDC Digitial Output Register (DOR)

	|7|6|5|4|3|2|1|0|
	 | | | | | | `------ floppy drive select (0=A, 1=B, 2=floppy C, ...)
	 | | | | | `-------- 1 = FDC enable, 0 = hold FDC at reset
	 | | | | `---------- 1 = DMA & I/O interface enabled
	 | | | `------------ 1 = turn floppy drive A motor on
	 | | `-------------- 1 = turn floppy drive B motor on
	 | `---------------- 1 = turn floppy drive C motor on
	 `------------------ 1 = turn floppy drive D motor on
 */

static void pc_fdc_dor_w(UINT8 data)
{
	int selected_drive;
	int floppy_count;

	floppy_count = device_count(IO_FLOPPY);

	if (floppy_count > (fdc->digital_output_register & 0x03))
		floppy_drive_set_ready_state(image_from_devtype_and_index(IO_FLOPPY, fdc->digital_output_register & 0x03), 1, 0);

	fdc->digital_output_register = data;

	selected_drive = data & 0x03;

	/* set floppy drive motor state */
	if (floppy_count > 0)
		floppy_drive_set_motor_state(image_from_devtype_and_index(IO_FLOPPY, 0),	(data>>4) & 0x0f);
	if (floppy_count > 1)
		floppy_drive_set_motor_state(image_from_devtype_and_index(IO_FLOPPY, 1),	(data>>5) & 0x01);
	if (floppy_count > 2)
		floppy_drive_set_motor_state(image_from_devtype_and_index(IO_FLOPPY, 2),	(data>>6) & 0x01);
	if (floppy_count > 3)
		floppy_drive_set_motor_state(image_from_devtype_and_index(IO_FLOPPY, 3),	(data>>7) & 0x01);

	if ((data>>4) & (1<<selected_drive))
	{
		if (floppy_count > selected_drive)
			floppy_drive_set_ready_state(image_from_devtype_and_index(IO_FLOPPY, selected_drive), 1, 0);
	}

	/* changing the DMA enable bit, will affect the terminal count state
	from reaching the fdc - if dma is enabled this will send it through
	otherwise it will be ignored */
	pc_fdc_set_tc_state(fdc->tc_state);

	/* changing the DMA enable bit, will affect the dma drq state
	from reaching us - if dma is enabled this will send it through
	otherwise it will be ignored */
	pc_fdc_hw_dma_drq(fdc->dma_state, fdc->dma_read);

	/* changing the DMA enable bit, will affect the irq state
	from reaching us - if dma is enabled this will send it through
	otherwise it will be ignored */
	pc_fdc_hw_interrupt(fdc->int_state);

	/* reset? */
	if ((fdc->digital_output_register & PC_FDC_FLAGS_DOR_FDC_ENABLED)==0)
	{
		/* yes */

			/* pc-xt expects a interrupt to be generated
			when the fdc is reset.
			In the FDC docs, it states that a INT will
			be generated if READY input is true when the
			fdc is reset. 
			
				It also states, that outputs to drive are set to 0.
				Maybe this causes the drive motor to go on, and therefore
				the ready line is set. 

			This in return causes a int?? ---
		
		
		what is not yet clear is if this is a result of the drives ready state
		changing...
		*/
			nec765_set_ready_state(1);

		/* set FDC at reset */
		nec765_set_reset_state(1);
	}
	else
	{
		pc_fdc_set_tc_state(0);

		/* release reset on fdc */
		nec765_set_reset_state(0);
	}
}



READ8_HANDLER ( pc_fdc_r )
{
	UINT8 data = 0xff;

	switch(offset)
	{
		case 0: /* status register a */
		case 1: /* status register b */
			data = 0x00;
		case 2:
			data = fdc->digital_output_register;
			break;
		case 3: /* tape drive select? */
			break;
		case 4:
			data = nec765_status_r(0);
			break;
		case 5:
			data = nec765_data_r(offset);
			break;
		case 6: /* FDC reserved */
			break;
		case 7:
			data = fdc->digital_input_register;
			break;
    }

	if (LOG_FDC)
		logerror("pc_fdc_r(): pc=0x%08x offset=%d result=0x%02X\n", (unsigned) activecpu_get_reg(REG_PC), offset, data);
	return data;
}



WRITE8_HANDLER ( pc_fdc_w )
{
	if (LOG_FDC)
		logerror("pc_fdc_w(): pc=0x%08x offset=%d data=0x%02X\n", (unsigned) activecpu_get_reg(REG_PC), offset, data);

	switch(offset)
	{
		case 0:	/* n/a */
		case 1:	/* n/a */
			break;
		case 2:
			pc_fdc_dor_w(data);
			break;
		case 3:
			/* tape drive select? */
			break;
		case 4:
			pc_fdc_data_rate_w(data);
			break;
		case 5:
			nec765_data_w(0, data);
			break;
		case 6:
			/* FDC reserved */
			break;
		case 7:
			/* Configuration Control Register
			 *
			 * Currently unimplemented; bits 1-0 are supposed to control data
			 * flow rates:
			 *		0 0		 500 kbps
			 *		0 1		 300 kbps
			 *		1 0		 250 kbps
			 *		1 1		1000 kbps
			 */
			break;
	}
}

READ16_HANDLER( pc16le_fdc_r ) { return read16le_with_read8_handler(pc_fdc_r, offset, mem_mask); }
WRITE16_HANDLER( pc16le_fdc_w ) { write16le_with_write8_handler(pc_fdc_w, offset, data, mem_mask); }

READ32_HANDLER( pc32le_fdc_r ) { return read32le_with_read8_handler(pc_fdc_r, offset, mem_mask); }
WRITE32_HANDLER( pc32le_fdc_w ) { write32le_with_write8_handler(pc_fdc_w, offset, data, mem_mask); }

READ64_HANDLER( pc64be_fdc_r ) { return read64be_with_read8_handler(pc_fdc_r, offset, mem_mask); }
WRITE64_HANDLER( pc64be_fdc_w ) { write64be_with_write8_handler(pc_fdc_w, offset, data, mem_mask); }