# OMAC_PATH_PERL
# --------------
AC_DEFUN([OMAC_PATH_PERL],
[AC_PATH_PROG(PERL, perl)])

# OMAC_PERL_EMBED_FLAGS
# ---------------------
AC_DEFUN([OMAC_PERL_EMBED_FLAGS],[
	AC_REQUIRE([OMAC_PATH_PERL])
	AC_MSG_CHECKING(for flags to compile embedded Perl)
	perl_embed_ldflags=`$PERL -MExtUtils::Embed -e ldopts`
	perl_embed_ccflags=`$PERL -MExtUtils::Embed -e ccopts`
	AC_SUBST(perl_embed_ldflags)
	AC_SUBST(perl_embed_ccflags)
	AC_MSG_RESULT([$perl_embed_ccflags])
])

# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN(AM_PATH_SDL,
[dnl 
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
            sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
            sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
		    , enable_sdltest=yes)

  if test x$sdl_exec_prefix != x ; then
     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
     if test x${SDL_CONFIG+set} != xset ; then
        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
     fi
  fi
  if test x$sdl_prefix != x ; then
     sdl_args="$sdl_args --prefix=$sdl_prefix"
     if test x${SDL_CONFIG+set} != xset ; then
        SDL_CONFIG=$sdl_prefix/bin/sdl-config
     fi
  fi

  AC_REQUIRE([AC_CANONICAL_TARGET])
  PATH="$prefix/bin:$prefix/usr/bin:$PATH"
  AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
  min_sdl_version=ifelse([$1], ,0.11.0,$1)
  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
  no_sdl=""
  if test "$SDL_CONFIG" = "no" ; then
    no_sdl=yes
  else
    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`

    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_sdltest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $SDL_CFLAGS"
      LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
      rm -f conf.sdltest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro;
  char *tmp_version;

  /* This hangs on some systems (?)
  system ("touch conf.sdltest");
  */
  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_sdl_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_sdl_version");
     exit(1);
   }

   if (($sdl_major_version > major) ||
      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_sdl" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$SDL_CONFIG" = "no" ; then
       echo "*** The sdl-config script installed by SDL could not be found"
       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the SDL_CONFIG environment variable to the"
       echo "*** full path to sdl-config."
     else
       if test -f conf.sdltest ; then
        :
       else
          echo "*** Could not run SDL test program, checking why..."
          CFLAGS="$CFLAGS $SDL_CFLAGS"
          LIBS="$LIBS $SDL_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"

int main(int argc, char *argv[])
{ return 0; }
#undef  main
#define main K_and_R_C_main
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding SDL or finding the wrong"
          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     SDL_CFLAGS=""
     SDL_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(SDL_CFLAGS)
  AC_SUBST(SDL_LIBS)
  rm -f conf.sdltest
])



# Configure paths for FreeType2
# Marcelo Magallon 2001-10-26, based on gtk.m4 by Owen Taylor

dnl AC_CHECK_FT2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for FreeType2, and define FT2_CFLAGS and FT2_LIBS
dnl
AC_DEFUN(AC_CHECK_FT2,
[dnl
dnl Get the cflags and libraries from the freetype-config script
dnl
AC_ARG_WITH(ft-prefix,
[  --with-ft-prefix=PREFIX
                          Prefix where FreeType is installed (optional)],
            ft_config_prefix="$withval", ft_config_prefix="")
AC_ARG_WITH(ft-exec-prefix,
[  --with-ft-exec-prefix=PREFIX
                          Exec prefix where FreeType is installed (optional)],
            ft_config_exec_prefix="$withval", ft_config_exec_prefix="")
AC_ARG_ENABLE(freetypetest,
[  --disable-freetypetest  Do not try to compile and run
                          a test FreeType program],
              [], enable_fttest=yes)

if test x$ft_config_exec_prefix != x ; then
  ft_config_args="$ft_config_args --exec-prefix=$ft_config_exec_prefix"
  if test x${FT2_CONFIG+set} != xset ; then
    FT2_CONFIG=$ft_config_exec_prefix/bin/freetype-config
  fi
fi
if test x$ft_config_prefix != x ; then
  ft_config_args="$ft_config_args --prefix=$ft_config_prefix"
  if test x${FT2_CONFIG+set} != xset ; then
    FT2_CONFIG=$ft_config_prefix/bin/freetype-config
  fi
fi
AC_PATH_PROG(FT2_CONFIG, freetype-config, no)

min_ft_version=ifelse([$1], ,6.1.0,$1)
AC_MSG_CHECKING(for FreeType - version >= $min_ft_version)
no_ft=""
if test "$FT2_CONFIG" = "no" ; then
  no_ft=yes
else
  FT2_CFLAGS=`$FT2_CONFIG $ft_config_args --cflags`
  FT2_LIBS=`$FT2_CONFIG $ft_config_args --libs`
  ft_config_major_version=`$FT2_CONFIG $ft_config_args --version | \
         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
  ft_config_minor_version=`$FT2_CONFIG $ft_config_args --version | \
         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
  ft_config_micro_version=`$FT2_CONFIG $ft_config_args --version | \
         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
  ft_min_major_version=`echo $min_ft_version | \
         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
  ft_min_minor_version=`echo $min_ft_version | \
         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
  ft_min_micro_version=`echo $min_ft_version | \
         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
  if test x$enable_fttest = xyes ; then
    ft_config_is_lt=""
    if test $ft_config_major_version -lt $ft_min_major_version ; then
      ft_config_is_lt=yes
    else
      if test $ft_config_major_version -eq $ft_min_major_version ; then
        if test $ft_config_minor_version -lt $ft_min_minor_version ; then
          ft_config_is_lt=yes
        else
          if test $ft_config_minor_version -eq $ft_min_minor_version ; then
            if test $ft_config_micro_version -lt $ft_min_micro_version ; then
              ft_config_is_lt=yes
            fi
          fi
        fi
      fi
    fi
    if test x$ft_config_is_lt = xyes ; then
      no_ft=yes
    else
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $FT2_CFLAGS"
      LIBS="$FT2_LIBS $LIBS"
dnl
dnl Sanity checks for the results of freetype-config to some extent
dnl
      AC_TRY_RUN([
#include <ft2build.h>
#include FT_FREETYPE_H
#include <stdio.h>
#include <stdlib.h>

int
main()
{
  FT_Library library;
  FT_Error error;

  error = FT_Init_FreeType(&library);

  if (error)
    return 1;
  else
  {
    FT_Done_FreeType(library);
    return 0;
  }
}
],, no_ft=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
      CFLAGS="$ac_save_CFLAGS"
      LIBS="$ac_save_LIBS"
    fi             # test $ft_config_version -lt $ft_min_version
  fi               # test x$enable_fttest = xyes
fi                 # test "$FT2_CONFIG" = "no"
if test x$no_ft = x ; then
   AC_MSG_RESULT(yes)
   ifelse([$2], , :, [$2])
else
   AC_MSG_RESULT(no)
   if test "$FT2_CONFIG" = "no" ; then
     echo "*** The freetype-config script installed by FreeType 2 could not be found."
     echo "*** If FreeType 2 was installed in PREFIX, make sure PREFIX/bin is in"
     echo "*** your path, or set the FT2_CONFIG environment variable to the"
     echo "*** full path to freetype-config."
   else
     if test x$ft_config_is_lt = xyes ; then
       echo "*** Your installed version of the FreeType 2 library is too old."
       echo "*** If you have different versions of FreeType 2, make sure that"
       echo "*** correct values for --with-ft-prefix or --with-ft-exec-prefix"
       echo "*** are used, or set the FT2_CONFIG environment variable to the"
       echo "*** full path to freetype-config."
     else
       echo "*** The FreeType test program failed to run.  If your system uses"
       echo "*** shared libraries and they are installed outside the normal"
       echo "*** system library path, make sure the variable LD_LIBRARY_PATH"
       echo "*** (or whatever is appropiate for your system) is correctly set."
     fi
   fi
   FT2_CFLAGS=""
   FT2_LIBS=""
   ifelse([$3], , :, [$3])
fi
AC_SUBST(FT2_CFLAGS)
AC_SUBST(FT2_LIBS)
])