EDal& 9G W co~FfC:",2O/'5 " ? K       2 ,  0( Y "w  %     # B1 8t eK\-0^\L +3CV?\1{]r+   $)<&fS"LvG( ;47p(; " AM  (:+*B Q^>;E6!B*6 a)k*   SDr6o C!L!p!i"e# v####\#8$A$&*2$93% / 8)!?-+75B6>#';ADC 0, @"1=. (< 4E:%s on screen %s(no description)A configuration applet for DRI driversAbout DRIconfAdd ApplicationAdd settingApplicationApplication NameApplication PropertiesApplication settingsApply only to this executableCan't open "%s" for writing.Configuration file "%s" contains errors: %s I will leave the file alone until you fix the problem manually or remove the file.Configuration file "%s" contains errors: %s The file was not reloaded.Could not detect any configurable direct-rendering capable devices.Couldn't open "%s" for reading. The file was not reloaded.Create a new device or applicationCreated a new DRI configuration file "%s" for you.Created new DRI configuration files %s for you.DRIconf will be started in expert mode.Describe the device that you would like to configure.Device PropertiesDirect Rendering PreferencesDriver NameEnter the name of the application below. This just serves as a description for you. Don't forget to set the executable afterwards.Executable NameExit DRIconfExpert ModeKnown optionsLeave this disabled to configure all applications. Beware that some applications or games are just a shell script that starts a real executable with a different name.Move selected item downMove selected item upNew ApplicationNew DeviceNormalization of your DRI configuration file "%s" failed. Please report a bug with the original configuration file attached. The file will be treated as read-only for now.OptionParsing the driver's configuration information: %sProperties of selected device or applicationReally delete application "%s"?Really delete device and all applications in it?Really reload "%s" from disk?Reload selected configuration fileRemoveRemove selected device or applicationRename ApplicationReset to default valueSave selected configuration fileScreenScreen %sScreen NumberThe DRI configuration file "%s" is broken or could not be created.The configuration contains invalid entries. Save anyway?The driver for this device could not be determined or does not support configuration. You can still change the settings but it cannot be verified whether they are supported and valid.The executable name is important for identifying the application. If you get it wrong, your settings will not apply. Beware that some applications are started by a shell script, that has a different name than the real executable.There are errors in a driver's configuration information: %s This should not happen. It probably means that you have to update DRIconf.There are no usable DRI configuration files and a new one could not be created. Exiting now.There are unsaved modifications. Exit anyway?There exists an application configuration for the same executable. You can't create multiple application configurations for the same executable.There exists an application configuration with the same name. Please enter a different name.This tab shows settings that are no longer supported by the 3D driver. Unless you're using the same configuration file on another computer with a different driver version, it is safe to remove these settings.Translated byUnknownUnknown optionsUnspecified deviceValueYou must enter both an application name and an executable name.Your DRI configuration file "%s" is not writable.translator-creditsProject-Id-Version: driconf Report-Msgid-Bugs-To: POT-Creation-Date: 2006-09-17 21:00-0400 PO-Revision-Date: 2006-09-17 21:19-0400 Last-Translator: Felix Kuehling Language-Team: German MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Generated-By: pygettext.py 1.5 Plural-Forms: nplurals=2; plural=(n != 1); %s auf Bildschirm %s(keine Beschreibung)Ein Konfigurationswerkzeug für DRI-TreiberÜber DRIconfAnwendung HinzufügenEinstellung hinzufügenAnwendungName der AnwendungAnwendungseigenschaftenAnwendungseinstellungenNur auf diese ausführbare Datei anwendenKann "%s" nicht zum Schreiben öffnen.Die Konfigurationsdatei "%s" ist fehlerhaft: %s Ich werde die Datei ignorieren, bis Sie das Problem von Hand behoben oder die Datei gelöscht haben.Die Konfigurationsdatei "%s" enthält Fehler: %s Die Datei wurde nicht neu geladen.Es wurden keine konfigurierbaren, direct-rendering-fähigen Geräte erkannt.Konnte "%s" nicht zum Lesen öffnen. Die Datei wurde nicht neu geladen.Neues Gerät oder neue Anwendung anlegenEine neue Konfigurationsdatei "%s" wurde für Sie angelegt.Neue Konfigurationsdateien %s wurden für Sie angelegt.DRIconf wird im Expertenmodus gestartet.Beschreiben Sie das Gerät, das Sie konfigurieren möchten.GeräteeigenschaftenDirect Rendering EinstellungenTreibernameGeben Sie unten den Namen der Anwendung ein. Dieser dient nur für Sie als Beschreibung. Denken Sie anschließend daran, das ausführbare Programm festzulegen.Name der ausführbaren DateiDRIconf beendenExpertenmodusBekannte OptionenWenn deaktiviert, werden alle Anwendungen konfiguriert. Beachten Sie, dass einige Anwendungen oder Spiele nur Shellskripte sind, die ein anderes ausführbares Programm starten.Verschiebe ausgewählten Eintrag nach untenVerschiebe ausgewählten Eintrag nach obenNeue AnwendungNeues GerätDie Normalisierung Ihrer DRI Konfigurationsdatei "%s" ist fehlgeschlagen. Bitte schicken sie einen Fehlerbericht einschließlich der originalen Konfigurationsdatei ab. Die Datei wird solange als schreibgeschützt behandelt.OptionBeim verarbeiten der Treiberkonfigurationsinformationen: %sEigenschaften des/der ausgewählten Gerätes/AnwendungAnwendung "%s" wirklich löschen?Dieses Gerät mit allen enthaltenen Anwendungen wirklich löschen?"%s" wirklich neu laden?Ausgewählte Konfigurationsdatei neu ladenEntfernenAusgewählte(s) Gerät/Anwendung löschenAnwendung umbenennenAuf Standardwert zurücksetzenAusgewählte Konfigurationsdatei speichernBildschirmBildschirm %sBildschirmnummerDie DRI Konfigurationsdatei "%s" ist beschädigt oder konnte nicht angelegt werden.Die Konfiguration enthält ungültige Einträge. Trotzdem speichern?Der Treiber für dieses Gerät konnte nicht bestimmt werden oder ist nicht konfigurierbar. Sie können die Einstellungen trotzdem bearbeiten. Es kann jedoch nicht überprüft werden, ob sie vom Treiber unterstützt werden und zulässig sind.Der Name der ausführbaren Datei ist wichtig zur Erkennung der Anwendung. Wenn Sie hier einen Fehler machen, werden Ihre Einstellungen von der Anwendung nicht berücksichtigt. Beachten Sie, dass einige Anwendungen von einem Shellskript gestartet werden, das einen anderen Namen hat, als die ausführbare Datei.Die Konfigurationsinformation eines Treibers ist fehlerhaft: %s Das dürfte nicht passieren. Wahrscheinlich müssen Sie DRIconf aktualisieren.Es existieren keine brauchbaren DRI Konfigurationsdateien und es konnte keine neue Konfigurationsdatei angelegt werden. Das Programm wird jetzt beendet.Einige Änderungen wurden noch nicht gespeichert. Trotzdem beenden?Es existiert bereits eine Anwendungskonfiguration für die selbe ausführbare Datei. Sie können nicht mehrere Konfigurationen für die selbe ausführbare Datei erstellen.Es existiert bereits eine Anwendungskonfiguration mit dem selben Namen. Bitte geben Sie einen anderen Namen ein.Dieser Reiter enthält Einstellungen, die vom 3D-Treiber nicht mehr unterstützt werden. Sie können diese ohne Bedenken entfernen, es sei denn, die selbe Konfigurationsdatei wird auf einem weiteren Computer mit einer anderen Treiberversion verwendet.Übersetzung vonUnbekanntUnbekannte OptionenBeliebiges GerätWertSie müssen sowohl einen Anwendungsnamen als auch den Namen der ausführbaren Datei angeben.Ihre DRI Konfigurationsdatei "%s" ist schreibgeschützt.Felix Kühling