// $Id: moldedit.h 1282 2006-06-09 09:46:49Z alex $ /* @@tag:xara-cn@@ DO NOT MODIFY THIS LINE ================================XARAHEADERSTART=========================== Xara LX, a vector drawing and manipulation program. Copyright (C) 1993-2006 Xara Group Ltd. Copyright on certain contributions may be held in joint with their respective authors. See AUTHORS file for details. LICENSE TO USE AND MODIFY SOFTWARE ---------------------------------- This file is part of Xara LX. Xara LX is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. Xara LX and its component source files are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Xara LX (see the file GPL in the root directory of the distribution); if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ADDITIONAL RIGHTS ----------------- Conditional upon your continuing compliance with the GNU General Public License described above, Xara Group Ltd grants to you certain additional rights. The additional rights are to use, modify, and distribute the software together with the wxWidgets library, the wxXtra library, and the "CDraw" library and any other such library that any version of Xara LX relased by Xara Group Ltd requires in order to compile and execute, including the static linking of that library to XaraLX. In the case of the "CDraw" library, you may satisfy obligation under the GNU General Public License to provide source code by providing a binary copy of the library concerned and a copy of the license accompanying it. Nothing in this section restricts any of the rights you have under the GNU General Public License. SCOPE OF LICENSE ---------------- This license applies to this program (XaraLX) and its constituent source files only, and does not necessarily apply to other Xara products which may in part share the same code base, and are subject to their own licensing terms. This license does not apply to files in the wxXtra directory, which are built into a separate library, and are subject to the wxWindows license contained within that directory in the file "WXXTRA-LICENSE". This license does not apply to the binary libraries (if any) within the "libs" directory, which are subject to a separate license contained within that directory in the file "LIBS-LICENSE". ARRANGEMENTS FOR CONTRIBUTION OF MODIFICATIONS ---------------------------------------------- Subject to the terms of the GNU Public License (see above), you are free to do whatever you like with your modifications. However, you may (at your option) wish contribute them to Xara's source tree. You can find details of how to do this at: http://www.xaraxtreme.org/developers/ Prior to contributing your modifications, you will need to complete our contributor agreement. This can be found at: http://www.xaraxtreme.org/developers/contribute/ Please note that Xara will not accept modifications which modify any of the text between the start and end of this header (marked XARAHEADERSTART and XARAHEADEREND). MARKS ----- Xara, Xara LX, Xara X, Xara X/Xtreme, Xara Xtreme, the Xtreme and Xara designs are registered or unregistered trademarks, design-marks, and/or service marks of Xara Group Ltd. All rights in these marks are reserved. Xara Group Ltd, Gaddesden Place, Hemel Hempstead, HP2 6EX, UK. http://www.xara.com/ =================================XARAHEADEREND============================ */ // Header for the mould tools operations. These operations act as a common // library for controlling various mould types. #ifndef INC_MOULDEDIT #define INC_MOULDEDIT #include "nodemold.h" //#include "selop.h" - in camtypes.h [AUTOMATICALLY REMOVED] //#include "ops.h" - in camtypes.h [AUTOMATICALLY REMOVED] class MouldPerspective; class NodeMouldPath; #define OPTOKEN_DRAGVANISHPOINT _T("DragVanishPoint") /******************************************************************************************* > class OpMouldLibSel: public SelOperation Author: Mike_Kenny (Xara Group Ltd) Created: 18/01/95 Purpose: Provides a library of undoable functions for moulding objects. ********************************************************************************************/ class OpMouldLibSel: public SelOperation { CC_DECLARE_DYNCREATE( OpMouldLibSel ) public: OpMouldLibSel(); protected: static BOOL IsAMouldSelected(NodeMould** pNodeMould); BOOL CreateNewMould(Path* pShape, MouldSpace m_space, BOOL FitSelection, BOOL LockAspect); BOOL AllMouldObjects(List* pNodeList); NodeMould* DoCreateMould(Path* pShape, MouldSpace mSpace, List* NodeList, DocRect* pBounds, BOOL ScaleToFit, BOOL LockAspect); BOOL DoRemoveAllMoulds(List* pNodeList); BOOL DoRemoveMould(NodeMould* pMould, BOOL PutOnClip); BOOL DoReplaceAllMoulds( List* pNodeList, Path* pShape, MouldSpace mSpace, BOOL ScaleToFit, BOOL LockAspect); BOOL DoReplaceMould( NodeMould* pMould, Path* pShape, MouldSpace mSpace, BOOL ScaleToFit, BOOL LockAspect); BOOL DoRecordGeometry(NodeMould* pMould); BOOL DoCreateOrReplaceMould( SelRange* pSelected, Path* pShape, MouldSpace m_space, BOOL ScaleToFit, BOOL LockAspect); private: DocRect* FindScaleRect(DocRect* pSRect, DocRect* pDRect, BOOL ScaleToFit, BOOL LockAspect); BOOL LocaliseMouldAttributes(NodeMould* pMould); BOOL LocaliseObjectAttrs(NodeRenderableInk* pParent, NodeRenderableInk* pInkNode); BOOL HideAllMouldAttrs(NodeMould* pMould); }; /******************************************************************************************* > class OpMouldLib: public UndoableOperation Author: Mike_Kenny (Xara Group Ltd) Created: 18/01/95 Purpose: Provides a library of undoable functions for moulding objects. ********************************************************************************************/ class OpMouldLib: public UndoableOperation { CC_DECLARE_DYNCREATE( OpMouldLib ) public: OpMouldLib(); protected: BOOL DoRotateMould(NodeMould* pMould); }; /******************************************************************************************** > class RecordGeometryAction: public Action Author: Mike_Kenny (Xara Group Ltd) Created: 16/03/95 Purpose: This action records the current mould geometry being used by a particular mould node. Once recorded this allows the geometry to be changed. During undo the old geometry will be replaced but not initialised. SeeAlso: NodeMould::SaveContext() ********************************************************************************************/ class RecordGeometryAction: public Action { CC_DECLARE_DYNCREATE( RecordGeometryAction ) public: RecordGeometryAction(); ~RecordGeometryAction(); virtual ActionCode Execute(); static ActionCode Init(Operation* const pOp, ActionList* pActionList, NodeMould* const pMould, Action** NewAction); static ActionCode DoRecord( Operation* const pOp, NodeMould* const pMould); private: NodeMould* pSavedMould; MouldGeometry* pSavedGeometry; }; /******************************************************************************************** > class SaveDetachAction: public Action Author: Mike_Kenny (Xara Group Ltd) Created: 26/01/95 Purpose: This action saves and restores the detach flags inside a mould object SeeAlso: - ********************************************************************************************/ class SaveDetachAction: public Action { CC_DECLARE_DYNCREATE( SaveDetachAction ) public: SaveDetachAction(); virtual ActionCode Execute(); static ActionCode Save(Operation* const pOp, NodeMould* const pMould); static ActionCode Init(Operation* const pOp, ActionList* pActionList, NodeMould* const pMould, Action** NewAction); private: NodeMould* pCurrMould; BOOL CurrDetached; }; /******************************************************************************************** > class InvalidateRectAction: public Action Author: Mike_Kenny (Xara Group Ltd) Created: 26/01/95 Purpose: When executed this action will Force a redraw of a bounding rectangle over a certain spread SeeAlso: - ********************************************************************************************/ class InvalidateRectAction: public Action { CC_DECLARE_DYNCREATE( InvalidateRectAction ) public: InvalidateRectAction(); virtual ActionCode Execute(); static ActionCode DoRecord( Operation* const pOp, const DocRect& Rect, Spread* pSpread); static ActionCode Init(Operation* const pOp, ActionList* pActionList, const DocRect& Rect, Spread* pSpread, Action** NewAction); private: DocRect InvalidRect; Spread* InvalidSpread; }; /******************************************************************************************** > class RedrawBoundsAction : public Action Author: Mike_Kenny (Xara Group Ltd) Created: 18/12/95 Purpose: An action to record the bounds of the mould. This op differs from RecordBoundsAction in that it does not use GetUnionBlobBounds() which is really bad for perspectives as this includes the vanishing points which results in a vast area of the document being redrawn. So we have to do everything separately SeeAlso: ********************************************************************************************/ class RedrawBoundsAction : public Action { CC_DECLARE_DYNCREATE(RedrawBoundsAction) public: RedrawBoundsAction(); virtual ActionCode Execute(); static ActionCode DoRecord( Operation* pOp, NodeMould* WhichNode, BOOL Redraw); static ActionCode Init( Operation* pOp, ActionList* pActionList, NodeMould* WhichNode, Action** NewAction); static void RedrawNode(Operation* pOp, NodeMould* pNode); protected: NodeMould* ChangedNode; }; /*********************************************************************************************** > class OpDragOrigin : public UndoableOperation Author: Mike_Kenny (Xara Group Ltd) Created: 25/01/95 Purpose: defines an operation for dragging perspective mould vanishing points around ***********************************************************************************************/ class OpDragOrigin : public UndoableOperation { CC_DECLARE_DYNCREATE(OpDragOrigin); public: OpDragOrigin(); static BOOL Init(); static OpState GetState(String_256* Description, OpDescriptor*); void DoDragVanishPoint(Spread*, const DocCoord&, ClickModifiers, NodeMould*, BOOL); virtual void DragPointerMove(DocCoord Pos, ClickModifiers Mods, Spread* pSpread, BOOL bSolidDrag); virtual void DragFinished(DocCoord Pos, ClickModifiers Mods, Spread* pSpread, BOOL Success, BOOL bSolidDrag); virtual void RenderDragBlobs(DocRect, Spread*, BOOL bSolidDrag); virtual void GetOpName(String_256* OpName); private: DocRect CalcBlobClipRect(); private: Spread* StartSpread; NodeMould* pEditMould; NodeMouldPath* pEditMouldPath; Path* pEditPath; MouldPerspective* pEditGeometry; DocRect EditRect; DocCoord Blob; }; /******************************************************************************************** > class BuildMouldAction: public Action Author: Mike_Kenny (Xara Group Ltd) Created: 26/01/95 Purpose: When executed this action will get the mould to rebuild itself. SeeAlso: - ********************************************************************************************/ class BuildMouldAction: public Action { CC_DECLARE_DYNCREATE( BuildMouldAction ) public: BuildMouldAction(); virtual ActionCode Execute(); static ActionCode DoRecord( Operation* const pOp, NodeMould* pMould); static ActionCode Init(Operation* const pOp, ActionList* pActionList, NodeMould* pMould, Action** NewAction); private: NodeMould* pBuildMould; }; /******************************************************************************************** > class StartRebuildMouldAction: public Action Author: Mike_Kenny (Xara Group Ltd) Created: 26/01/95 Purpose: When executed this action will get the mould to rebuild itself. SeeAlso: - ********************************************************************************************/ class StartRebuildMouldAction: public Action { CC_DECLARE_DYNCREATE( StartRebuildMouldAction ) public: StartRebuildMouldAction(); virtual ActionCode Execute(); static ActionCode DoRecord( Operation* const pOp, NodeMould* pMould); static ActionCode Init(Operation* const pOp, ActionList* pActionList, NodeMould* pMould, Action** NewAction); private: NodeMould* pRebuildMould; }; /******************************************************************************************** > class EndRebuildMouldAction: public Action Author: Mike_Kenny (Xara Group Ltd) Created: 26/01/95 Purpose: When executed this action will get the mould to rebuild itself. SeeAlso: - ********************************************************************************************/ class EndRebuildMouldAction: public Action { CC_DECLARE_DYNCREATE( EndRebuildMouldAction ) public: EndRebuildMouldAction(); virtual ActionCode Execute(); static ActionCode DoRecord( Operation* const pOp, NodeMould* pMould); static ActionCode Init(Operation* const pOp, ActionList* pActionList, NodeMould* pMould, Action** NewAction); private: NodeMould* pRebuildMould; }; #endif