# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

#   ==================================================================
#   FILE: "/home/joze/pub/zimg/zimg/Makefile.am"
#   LAST MODIFIED: "Do, 25 Aug 2005 21:29:33 CEST (joze)"
#   (C) 1999 - 2002 by Johannes Zellner <johannes@zellner.org>
#   $Id: Makefile.am,v 1.24 2005/08/25 19:29:23 joze Exp $
#   ---
#
#   Copyright (c) 1999 - 2003, Johannes Zellner <johannes@zellner.org>
#   All rights reserved.
#
#   Redistribution and use in source and binary forms, with or without
#   modification, are permitted provided that the following conditions
#   are met:
#
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of Johannes Zellner nor the names of contributors
#       to this software may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
#   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
#   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
#   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
#   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
#   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


SHELL = /bin/sh

srcdir = .
top_srcdir = .

prefix = 
exec_prefix = 

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/zimg
pkglibdir = $(libdir)/zimg
pkgincludedir = $(includedir)/zimg

top_builddir = .

ACLOCAL = /mnt/gmirror/ports/graphics/zimg/work/zimg-5.0.0/missing aclocal-1.4
AUTOCONF = autoconf
AUTOMAKE = /mnt/gmirror/ports/graphics/zimg/work/zimg-5.0.0/missing automake-1.4
AUTOHEADER = autoheader

INSTALL = /usr/bin/install -c -o root -g wheel
INSTALL_PROGRAM = install  -s -o root -g wheel -m 555 $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = install  -o root -g wheel -m 444
INSTALL_SCRIPT = install  -o root -g wheel -m 555
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i386-unknown-gnu
host_triplet = i386-unknown-gnu
AR = ar
AS = @AS@
CC = cc
CXX = c++
CXXCPP = c++ -E
DLLTOOL = @DLLTOOL@
DYNALOAD_CFLAGS = -O -o
ECHO = echo
EGREP = grep -E
EXEEXT = 
F77 = g77
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
HAVE_LIB = @HAVE_LIB@
LIB = @LIB@
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = ./ltmain.sh
LN_S = ln -s
LTLIB = @LTLIB@
MAKEINFO = makeinfo
OBJDUMP = @OBJDUMP@
OBJEXT = 
PACKAGE = zimg
PKGDATADIR = /share/zimg
PKGLIBDIR = /lib/zimg
RANLIB = ranlib
RC = @RC@
STATIC = -static
STRIP = strip
SYSCONFDIR = /etc
VERSION = 5.0.0
gd_includes = -I/usr/local/include/
gd_lib = -L/home/love/usr/local/lib/lib -lgd
jpeg_libs = -ljpeg
png_libs = -lpng -lz

AUTOMAKE_OPTIONS = foreign
#LIBGETOPT = getopt/libgetopt.la
LIBGETOPT = 
#GETOPT_DIR = getopt
GETOPT_DIR = 

SUBDIRS = $(GETOPT_DIR)

bin_PROGRAMS = zimg
zimg_SOURCES = cmdln.c color.c contours.c getcolor.c img.c misc.c read.c smooth.c statistics.c zimg.c zimg_priv.h dynaload.c dynaload.h path.c path.h
include_HEADERS = zimg.h

EXTRA_DIST = Makefile.os2 config.os2 MAKEFILE.DJ2 CONFIG.DJ2 README.DJ2 zimg.1 zimg.1.html VERSION

zimg_LDADD = $(gd_lib) $(png_libs) $(jpeg_libs) $(LIBGETOPT)
INCLUDES = $(gd_includes)
man_MANS = zimg.1

CONFIGURE_DEPENDENCIES = VERSION
MAINTAINERCLEANFILES = `find . -type l -print` config.* configure aclocal.m4 stamp-h* tags* so_locations
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =  zimg.1
bin_PROGRAMS =  zimg$(EXEEXT)
PROGRAMS =  $(bin_PROGRAMS)


DEFS = -DHAVE_CONFIG_H -I. -I$(srcdir) -I.
CPPFLAGS = 
LDFLAGS = 
LIBS = -lm 
zimg_OBJECTS =  cmdln.$(OBJEXT) color.$(OBJEXT) contours.$(OBJEXT) \
getcolor.$(OBJEXT) img.$(OBJEXT) misc.$(OBJEXT) read.$(OBJEXT) \
smooth.$(OBJEXT) statistics.$(OBJEXT) zimg.$(OBJEXT) dynaload.$(OBJEXT) \
path.$(OBJEXT)
zimg_DEPENDENCIES = 
#zimg_DEPENDENCIES =  getopt/libgetopt.la
zimg_LDFLAGS = 
CFLAGS = -fno-common
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
man1dir = $(mandir)/man1
MANS = $(man_MANS)

NROFF = nroff
HEADERS =  $(include_HEADERS)

DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
Makefile.am Makefile.in NEWS TODO aclocal.m4 config.guess config.h.in \
config.sub configure configure.in install-sh ltmain.sh missing \
mkinstalldirs zimg.1.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
DIST_SUBDIRS =  getopt
SOURCES = $(zimg_SOURCES)
OBJECTS = $(zimg_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .lo .o .obj .s
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4):  configure.in 
	cd $(srcdir) && $(ACLOCAL)

config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:
zimg.1: $(top_builddir)/config.status zimg.1.in
	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

mostlyclean-binPROGRAMS:

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)

distclean-binPROGRAMS:

maintainer-clean-binPROGRAMS:

install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	list='$(bin_PROGRAMS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	done

.c.o:
	$(COMPILE) -c $<

# FIXME: We should only use cygpath when building on Windows,
# and only if it is available.
.c.obj:
	$(COMPILE) -c `cygpath -w $<`

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core
	-rm -f *.$(OBJEXT)

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

zimg$(EXEEXT): $(zimg_OBJECTS) $(zimg_DEPENDENCIES)
	@rm -f zimg$(EXEEXT)
	$(LINK) $(zimg_LDFLAGS) $(zimg_OBJECTS) $(zimg_LDADD) $(LIBS)

install-man1:
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done

uninstall-man1:
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
install-man: $(MANS)
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
	@$(NORMAL_UNINSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1

install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(includedir)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(include_HEADERS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(includedir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.



all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
cmdln.o: cmdln.c zimg_priv.h config.h
color.o: color.c config.h zimg_priv.h zimg.h path.h
contours.o: contours.c zimg_priv.h config.h
dynaload.o: dynaload.c config.h dynaload.h zimg.h path.h
getcolor.o: getcolor.c config.h zimg_priv.h
img.o: img.c zimg_priv.h config.h
misc.o: misc.c zimg_priv.h config.h
path.o: path.c config.h path.h
read.o: read.c zimg_priv.h config.h
smooth.o: smooth.c zimg_priv.h config.h
statistics.o: statistics.c zimg_priv.h config.h
zimg.o: zimg.c zimg_priv.h config.h zimg.h dynaload.h

info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-binPROGRAMS
install-exec: install-exec-recursive

install-data-am: install-man install-includeHEADERS
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS uninstall-man \
		uninstall-includeHEADERS
uninstall: uninstall-recursive
all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1 \
		$(DESTDIR)$(includedir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
		mostlyclean-compile mostlyclean-libtool \
		mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-libtool \
		clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile \
		distclean-libtool distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool install-man1 uninstall-man1 \
install-man uninstall-man uninstall-includeHEADERS \
install-includeHEADERS install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# building tags needs Darren Hiebert's exuberant ctags
# and a script which builds the syntax highlighting stuff
# for vim. Mainly for developing.
tags:
	ctags -R; vimtags

zimg.1.html: zimg.1
	rman -fhtml zimg.1 > $@

# OTHER_SOURCES = README GPL configure.in config.h.in zimg.1.in

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: