This is elisp, produced by makeinfo version 4.0f from ./elisp.texi. INFO-DIR-SECTION Editors START-INFO-DIR-ENTRY * Elisp: (elisp). The Emacs Lisp Reference Manual. END-INFO-DIR-ENTRY This Info file contains edition 2.8 of the GNU Emacs Lisp Reference Manual, corresponding to Emacs version 21.2. Published by the Free Software Foundation 59 Temple Place, Suite 330 Boston, MA 02111-1307 USA Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being "Copying", with the Front-Cover texts being "A GNU Manual", and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled "GNU Free Documentation License". (a) The FSF's Back-Cover Text is: "You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development."  File: elisp, Node: Changing Key Bindings, Next: Key Binding Commands, Prev: Functions for Key Lookup, Up: Keymaps Changing Key Bindings ===================== The way to rebind a key is to change its entry in a keymap. If you change a binding in the global keymap, the change is effective in all buffers (though it has no direct effect in buffers that shadow the global binding with a local one). If you change the current buffer's local map, that usually affects all buffers using the same major mode. The `global-set-key' and `local-set-key' functions are convenient interfaces for these operations (*note Key Binding Commands::). You can also use `define-key', a more general function; then you must specify explicitly the map to change. In writing the key sequence to rebind, it is good to use the special escape sequences for control and meta characters (*note String Type::). The syntax `\C-' means that the following character is a control character and `\M-' means that the following character is a meta character. Thus, the string `"\M-x"' is read as containing a single `M-x', `"\C-f"' is read as containing a single `C-f', and `"\M-\C-x"' and `"\C-\M-x"' are both read as containing a single `C-M-x'. You can also use this escape syntax in vectors, as well as others that aren't allowed in strings; one example is `[?\C-\H-x home]'. *Note Character Type::. The key definition and lookup functions accept an alternate syntax for event types in a key sequence that is a vector: you can use a list containing modifier names plus one base event (a character or function key name). For example, `(control ?a)' is equivalent to `?\C-a' and `(hyper control left)' is equivalent to `C-H-left'. One advantage of such lists is that the precise numeric codes for the modifier bits don't appear in compiled files. For the functions below, an error is signaled if KEYMAP is not a keymap or if KEY is not a string or vector representing a key sequence. You can use event types (symbols) as shorthand for events that are lists. - Function: define-key keymap key binding This function sets the binding for KEY in KEYMAP. (If KEY is more than one event long, the change is actually made in another keymap reached from KEYMAP.) The argument BINDING can be any Lisp object, but only certain types are meaningful. (For a list of meaningful types, see *Note Key Lookup::.) The value returned by `define-key' is BINDING. Every prefix of KEY must be a prefix key (i.e., bound to a keymap) or undefined; otherwise an error is signaled. If some prefix of KEY is undefined, then `define-key' defines it as a prefix key so that the rest of KEY can be defined as specified. If there was previously no binding for KEY in KEYMAP, the new binding is added at the beginning of KEYMAP. The order of bindings in a keymap makes no difference in most cases, but it does matter for menu keymaps (*note Menu Keymaps::). Here is an example that creates a sparse keymap and makes a number of bindings in it: (setq map (make-sparse-keymap)) => (keymap) (define-key map "\C-f" 'forward-char) => forward-char map => (keymap (6 . forward-char)) ;; Build sparse submap for `C-x' and bind `f' in that. (define-key map "\C-xf" 'forward-word) => forward-word map => (keymap (24 keymap ; C-x (102 . forward-word)) ; f (6 . forward-char)) ; C-f ;; Bind `C-p' to the `ctl-x-map'. (define-key map "\C-p" ctl-x-map) ;; `ctl-x-map' => [nil ... find-file ... backward-kill-sentence] ;; Bind `C-f' to `foo' in the `ctl-x-map'. (define-key map "\C-p\C-f" 'foo) => 'foo map => (keymap ; Note `foo' in `ctl-x-map'. (16 keymap [nil ... foo ... backward-kill-sentence]) (24 keymap (102 . forward-word)) (6 . forward-char)) Note that storing a new binding for `C-p C-f' actually works by changing an entry in `ctl-x-map', and this has the effect of changing the bindings of both `C-p C-f' and `C-x C-f' in the default global map. - Function: substitute-key-definition olddef newdef keymap &optional oldmap This function replaces OLDDEF with NEWDEF for any keys in KEYMAP that were bound to OLDDEF. In other words, OLDDEF is replaced with NEWDEF wherever it appears. The function returns `nil'. For example, this redefines `C-x C-f', if you do it in an Emacs with standard bindings: (substitute-key-definition 'find-file 'find-file-read-only (current-global-map)) If OLDMAP is non-`nil', that changes the behavior of `substitute-key-definition': the bindings in OLDMAP determine which keys to rebind. The rebindings still happen in KEYMAP, not in OLDMAP. Thus, you can change one map under the control of the bindings in another. For example, (substitute-key-definition 'delete-backward-char 'my-funny-delete my-map global-map) puts the special deletion command in `my-map' for whichever keys are globally bound to the standard deletion command. Here is an example showing a keymap before and after substitution: (setq map '(keymap (?1 . olddef-1) (?2 . olddef-2) (?3 . olddef-1))) => (keymap (49 . olddef-1) (50 . olddef-2) (51 . olddef-1)) (substitute-key-definition 'olddef-1 'newdef map) => nil map => (keymap (49 . newdef) (50 . olddef-2) (51 . newdef)) - Function: suppress-keymap keymap &optional nodigits This function changes the contents of the full keymap KEYMAP by making all the printing characters undefined. More precisely, it binds them to the command `undefined'. This makes ordinary insertion of text impossible. `suppress-keymap' returns `nil'. If NODIGITS is `nil', then `suppress-keymap' defines digits to run `digit-argument', and `-' to run `negative-argument'. Otherwise it makes them undefined like the rest of the printing characters. The `suppress-keymap' function does not make it impossible to modify a buffer, as it does not suppress commands such as `yank' and `quoted-insert'. To prevent any modification of a buffer, make it read-only (*note Read Only Buffers::). Since this function modifies KEYMAP, you would normally use it on a newly created keymap. Operating on an existing keymap that is used for some other purpose is likely to cause trouble; for example, suppressing `global-map' would make it impossible to use most of Emacs. Most often, `suppress-keymap' is used to initialize local keymaps of modes such as Rmail and Dired where insertion of text is not desirable and the buffer is read-only. Here is an example taken from the file `emacs/lisp/dired.el', showing how the local keymap for Dired mode is set up: (setq dired-mode-map (make-keymap)) (suppress-keymap dired-mode-map) (define-key dired-mode-map "r" 'dired-rename-file) (define-key dired-mode-map "\C-d" 'dired-flag-file-deleted) (define-key dired-mode-map "d" 'dired-flag-file-deleted) (define-key dired-mode-map "v" 'dired-view-file) (define-key dired-mode-map "e" 'dired-find-file) (define-key dired-mode-map "f" 'dired-find-file) ...  File: elisp, Node: Key Binding Commands, Next: Scanning Keymaps, Prev: Changing Key Bindings, Up: Keymaps Commands for Binding Keys ========================= This section describes some convenient interactive interfaces for changing key bindings. They work by calling `define-key'. People often use `global-set-key' in their init files (*note Init File::) for simple customization. For example, (global-set-key "\C-x\C-\\" 'next-line) or (global-set-key [?\C-x ?\C-\\] 'next-line) or (global-set-key [(control ?x) (control ?\\)] 'next-line) redefines `C-x C-\' to move down a line. (global-set-key [M-mouse-1] 'mouse-set-point) redefines the first (leftmost) mouse button, typed with the Meta key, to set point where you click. Be careful when using non-ASCII text characters in Lisp specifications of keys to bind. If these are read as multibyte text, as they usually will be in a Lisp file (*note Loading Non-ASCII::), you must type the keys as multibyte too. For instance, if you use this: (global-set-key "o"" 'my-function) ; bind o-umlaut or (global-set-key ?o" 'my-function) ; bind o-umlaut and your language environment is multibyte Latin-1, these commands actually bind the multibyte character with code 2294, not the unibyte Latin-1 character with code 246 (`M-v'). In order to use this binding, you need to enter the multibyte Latin-1 character as keyboard input. One way to do this is by using an appropriate input method (*note Input Methods: (emacs)Input Methods.). If you want to use a unibyte character in the key binding, you can construct the key sequence string using `multibyte-char-to-unibyte' or `string-make-unibyte' (*note Converting Representations::). - Command: global-set-key key definition This function sets the binding of KEY in the current global map to DEFINITION. (global-set-key KEY DEFINITION) == (define-key (current-global-map) KEY DEFINITION) - Command: global-unset-key key This function removes the binding of KEY from the current global map. One use of this function is in preparation for defining a longer key that uses KEY as a prefix--which would not be allowed if KEY has a non-prefix binding. For example: (global-unset-key "\C-l") => nil (global-set-key "\C-l\C-l" 'redraw-display) => nil This function is implemented simply using `define-key': (global-unset-key KEY) == (define-key (current-global-map) KEY nil) - Command: local-set-key key definition This function sets the binding of KEY in the current local keymap to DEFINITION. (local-set-key KEY DEFINITION) == (define-key (current-local-map) KEY DEFINITION) - Command: local-unset-key key This function removes the binding of KEY from the current local map. (local-unset-key KEY) == (define-key (current-local-map) KEY nil)  File: elisp, Node: Scanning Keymaps, Next: Menu Keymaps, Prev: Key Binding Commands, Up: Keymaps Scanning Keymaps ================ This section describes functions used to scan all the current keymaps for the sake of printing help information. - Function: accessible-keymaps keymap &optional prefix This function returns a list of all the keymaps that can be reached (via zero or more prefix keys) from KEYMAP. The value is an association list with elements of the form `(KEY . MAP)', where KEY is a prefix key whose definition in KEYMAP is MAP. The elements of the alist are ordered so that the KEY increases in length. The first element is always `("" . KEYMAP)', because the specified keymap is accessible from itself with a prefix of no events. If PREFIX is given, it should be a prefix key sequence; then `accessible-keymaps' includes only the submaps whose prefixes start with PREFIX. These elements look just as they do in the value of `(accessible-keymaps)'; the only difference is that some elements are omitted. In the example below, the returned alist indicates that the key , which is displayed as `^[', is a prefix key whose definition is the sparse keymap `(keymap (83 . center-paragraph) (115 . foo))'. (accessible-keymaps (current-local-map)) =>(("" keymap (27 keymap ; Note this keymap for is repeated below. (83 . center-paragraph) (115 . center-line)) (9 . tab-to-tab-stop)) ("^[" keymap (83 . center-paragraph) (115 . foo))) In the following example, `C-h' is a prefix key that uses a sparse keymap starting with `(keymap (118 . describe-variable)...)'. Another prefix, `C-x 4', uses a keymap which is also the value of the variable `ctl-x-4-map'. The event `mode-line' is one of several dummy events used as prefixes for mouse actions in special parts of a window. (accessible-keymaps (current-global-map)) => (("" keymap [set-mark-command beginning-of-line ... delete-backward-char]) ("^H" keymap (118 . describe-variable) ... (8 . help-for-help)) ("^X" keymap [x-flush-mouse-queue ... backward-kill-sentence]) ("^[" keymap [mark-sexp backward-sexp ... backward-kill-word]) ("^X4" keymap (15 . display-buffer) ...) ([mode-line] keymap (S-mouse-2 . mouse-split-window-horizontally) ...)) These are not all the keymaps you would see in actuality. - Function: where-is-internal command &optional keymap firstonly noindirect This function is a subroutine used by the `where-is' command (*note Help: (emacs)Help.). It returns a list of key sequences (of any length) that are bound to COMMAND in a set of keymaps. The argument COMMAND can be any object; it is compared with all keymap entries using `eq'. If KEYMAP is `nil', then the maps used are the current active keymaps, disregarding `overriding-local-map' (that is, pretending its value is `nil'). If KEYMAP is non-`nil', then the maps searched are KEYMAP and the global keymap. If KEYMAP is a list of keymaps, only those keymaps are searched. Usually it's best to use `overriding-local-map' as the expression for KEYMAP. Then `where-is-internal' searches precisely the keymaps that are active. To search only the global map, pass `(keymap)' (an empty keymap) as KEYMAP. If FIRSTONLY is `non-ascii', then the value is a single string representing the first key sequence found, rather than a list of all possible key sequences. If FIRSTONLY is `t', then the value is the first key sequence, except that key sequences consisting entirely of ASCII characters (or meta variants of ASCII characters) are preferred to all other key sequences. If NOINDIRECT is non-`nil', `where-is-internal' doesn't follow indirect keymap bindings. This makes it possible to search for an indirect definition itself. (where-is-internal 'describe-function) => ("\^hf" "\^hd") - Command: describe-bindings &optional prefix This function creates a listing of all current key bindings, and displays it in a buffer named `*Help*'. The text is grouped by modes--minor modes first, then the major mode, then global bindings. If PREFIX is non-`nil', it should be a prefix key; then the listing includes only keys that start with PREFIX. The listing describes meta characters as followed by the corresponding non-meta character. When several characters with consecutive ASCII codes have the same definition, they are shown together, as `FIRSTCHAR..LASTCHAR'. In this instance, you need to know the ASCII codes to understand which characters this means. For example, in the default global map, the characters ` .. ~' are described by a single line. is ASCII 32, `~' is ASCII 126, and the characters between them include all the normal printing characters, (e.g., letters, digits, punctuation, etc.); all these characters are bound to `self-insert-command'.  File: elisp, Node: Menu Keymaps, Prev: Scanning Keymaps, Up: Keymaps Menu Keymaps ============ A keymap can define a menu as well as bindings for keyboard keys and mouse button. Menus are usually actuated with the mouse, but they can work with the keyboard also. * Menu: * Defining Menus:: How to make a keymap that defines a menu. * Mouse Menus:: How users actuate the menu with the mouse. * Keyboard Menus:: How they actuate it with the keyboard. * Menu Example:: Making a simple menu. * Menu Bar:: How to customize the menu bar. * Tool Bar:: A tool bar is a row of images. * Modifying Menus:: How to add new items to a menu.  File: elisp, Node: Defining Menus, Next: Mouse Menus, Up: Menu Keymaps Defining Menus -------------- A keymap is suitable for menu use if it has an "overall prompt string", which is a string that appears as an element of the keymap. (*Note Format of Keymaps::.) The string should describe the purpose of the menu's commands. Emacs displays the overall prompt string as the menu title in some cases, depending on the toolkit (if any) used for displaying menus.(1) Keyboard menus also display the overall prompt string. The easiest way to construct a keymap with a prompt string is to specify the string as an argument when you call `make-keymap', `make-sparse-keymap' or `define-prefix-command' (*note Creating Keymaps::). The order of items in the menu is the same as the order of bindings in the keymap. Since `define-key' puts new bindings at the front, you should define the menu items starting at the bottom of the menu and moving to the top, if you care about the order. When you add an item to an existing menu, you can specify its position in the menu using `define-key-after' (*note Modifying Menus::). * Menu: * Simple Menu Items:: A simple kind of menu key binding, limited in capabilities. * Extended Menu Items:: More powerful menu item definitions let you specify keywords to enable various features. * Menu Separators:: Drawing a horizontal line through a menu. * Alias Menu Items:: Using command aliases in menu items. ---------- Footnotes ---------- (1) It is required for menus which do not use a toolkit, e.g. under MS-DOS.  File: elisp, Node: Simple Menu Items, Next: Extended Menu Items, Up: Defining Menus Simple Menu Items ................. The simpler and older way to define a menu keymap binding looks like this: (ITEM-STRING . REAL-BINDING) The CAR, ITEM-STRING, is the string to be displayed in the menu. It should be short--preferably one to three words. It should describe the action of the command it corresponds to. You can also supply a second string, called the help string, as follows: (ITEM-STRING HELP . REAL-BINDING) HELP specifies a "help-echo" string to display while the mouse is on that item in the same way as `help-echo' text properties (*note Help display::). As far as `define-key' is concerned, ITEM-STRING and HELP-STRING are part of the event's binding. However, `lookup-key' returns just REAL-BINDING, and only REAL-BINDING is used for executing the key. If REAL-BINDING is `nil', then ITEM-STRING appears in the menu but cannot be selected. If REAL-BINDING is a symbol and has a non-`nil' `menu-enable' property, that property is an expression that controls whether the menu item is enabled. Every time the keymap is used to display a menu, Emacs evaluates the expression, and it enables the menu item only if the expression's value is non-`nil'. When a menu item is disabled, it is displayed in a "fuzzy" fashion, and cannot be selected. The menu bar does not recalculate which items are enabled every time you look at a menu. This is because the X toolkit requires the whole tree of menus in advance. To force recalculation of the menu bar, call `force-mode-line-update' (*note Mode Line Format::). You've probably noticed that menu items show the equivalent keyboard key sequence (if any) to invoke the same command. To save time on recalculation, menu display caches this information in a sublist in the binding, like this: (ITEM-STRING [HELP-STRING] (KEY-BINDING-DATA) . REAL-BINDING) Don't put these sublists in the menu item yourself; menu display calculates them automatically. Don't mention keyboard equivalents in the item strings themselves, since that is redundant.  File: elisp, Node: Extended Menu Items, Next: Menu Separators, Prev: Simple Menu Items, Up: Defining Menus Extended Menu Items ................... An extended-format menu item is a more flexible and also cleaner alternative to the simple format. It consists of a list that starts with the symbol `menu-item'. To define a non-selectable string, the item looks like this: (menu-item ITEM-NAME) A string starting with two or more dashes specifies a separator line; see *Note Menu Separators::. To define a real menu item which can be selected, the extended format item looks like this: (menu-item ITEM-NAME REAL-BINDING . ITEM-PROPERTY-LIST) Here, ITEM-NAME is an expression which evaluates to the menu item string. Thus, the string need not be a constant. The third element, REAL-BINDING, is the command to execute. The tail of the list, ITEM-PROPERTY-LIST, has the form of a property list which contains other information. Here is a table of the properties that are supported: `:enable FORM' The result of evaluating FORM determines whether the item is enabled (non-`nil' means yes). If the item is not enabled, you can't really click on it. `:visible FORM' The result of evaluating FORM determines whether the item should actually appear in the menu (non-`nil' means yes). If the item does not appear, then the menu is displayed as if this item were not defined at all. `:help HELP' The value of this property, HELP, specifies a "help-echo" string to display while the mouse is on that item. This is displayed in the same way as `help-echo' text properties (*note Help display::). Note that this must be a constant string, unlike the `help-echo' property for text and overlays. `:button (TYPE . SELECTED)' This property provides a way to define radio buttons and toggle buttons. The CAR, TYPE, says which: it should be `:toggle' or `:radio'. The CDR, SELECTED, should be a form; the result of evaluating it says whether this button is currently selected. A "toggle" is a menu item which is labeled as either "on" or "off" according to the value of SELECTED. The command itself should toggle SELECTED, setting it to `t' if it is `nil', and to `nil' if it is `t'. Here is how the menu item to toggle the `debug-on-error' flag is defined: (menu-item "Debug on Error" toggle-debug-on-error :button (:toggle . (and (boundp 'debug-on-error) debug-on-error))) This works because `toggle-debug-on-error' is defined as a command which toggles the variable `debug-on-error'. "Radio buttons" are a group of menu items, in which at any time one and only one is "selected." There should be a variable whose value says which one is selected at any time. The SELECTED form for each radio button in the group should check whether the variable has the right value for selecting that button. Clicking on the button should set the variable so that the button you clicked on becomes selected. `:key-sequence KEY-SEQUENCE' This property specifies which key sequence is likely to be bound to the same command invoked by this menu item. If you specify the right key sequence, that makes preparing the menu for display run much faster. If you specify the wrong key sequence, it has no effect; before Emacs displays KEY-SEQUENCE in the menu, it verifies that KEY-SEQUENCE is really equivalent to this menu item. `:key-sequence nil' This property indicates that there is normally no key binding which is equivalent to this menu item. Using this property saves time in preparing the menu for display, because Emacs does not need to search the keymaps for a keyboard equivalent for this menu item. However, if the user has rebound this item's definition to a key sequence, Emacs ignores the `:keys' property and finds the keyboard equivalent anyway. `:keys STRING' This property specifies that STRING is the string to display as the keyboard equivalent for this menu item. You can use the `\\[...]' documentation construct in STRING. `:filter FILTER-FN' This property provides a way to compute the menu item dynamically. The property value FILTER-FN should be a function of one argument; when it is called, its argument will be REAL-BINDING. The function should return the binding to use instead.  File: elisp, Node: Menu Separators, Next: Alias Menu Items, Prev: Extended Menu Items, Up: Defining Menus Menu Separators ............... A menu separator is a kind of menu item that doesn't display any text-instead, it divides the menu into subparts with a horizontal line. A separator looks like this in the menu keymap: (menu-item SEPARATOR-TYPE) where SEPARATOR-TYPE is a string starting with two or more dashes. In the simplest case, SEPARATOR-TYPE consists of only dashes. That specifies the default kind of separator. (For compatibility, `""' and `-' also count as separators.) Starting in Emacs 21, certain other values of SEPARATOR-TYPE specify a different style of separator. Here is a table of them: `"--no-line"' `"--space"' An extra vertical space, with no actual line. `"--single-line"' A single line in the menu's foreground color. `"--double-line"' A double line in the menu's foreground color. `"--single-dashed-line"' A single dashed line in the menu's foreground color. `"--double-dashed-line"' A double dashed line in the menu's foreground color. `"--shadow-etched-in"' A single line with a 3D sunken appearance. This is the default, used separators consisting of dashes only. `"--shadow-etched-out"' A single line with a 3D raised appearance. `"--shadow-etched-in-dash"' A single dashed line with a 3D sunken appearance. `"--shadow-etched-out-dash"' A single dashed line with a 3D raised appearance. `"--shadow-double-etched-in"' Two lines with a 3D sunken appearance. `"--shadow-double-etched-out"' Two lines with a 3D raised appearance. `"--shadow-double-etched-in-dash"' Two dashed lines with a 3D sunken appearance. `"--shadow-double-etched-out-dash"' Two dashed lines with a 3D raised appearance. You can also give these names in another style, adding a colon after the double-dash and replacing each single dash with capitalization of the following word. Thus, `"--:singleLine"', is equivalent to `"--single-line"'. Some systems and display toolkits don't really handle all of these separator types. If you use a type that isn't supported, the menu displays a similar kind of separator that is supported.  File: elisp, Node: Alias Menu Items, Prev: Menu Separators, Up: Defining Menus Alias Menu Items ................ Sometimes it is useful to make menu items that use the "same" command but with different enable conditions. The best way to do this in Emacs now is with extended menu items; before that feature existed, it could be done by defining alias commands and using them in menu items. Here's an example that makes two aliases for `toggle-read-only' and gives them different enable conditions: (defalias 'make-read-only 'toggle-read-only) (put 'make-read-only 'menu-enable '(not buffer-read-only)) (defalias 'make-writable 'toggle-read-only) (put 'make-writable 'menu-enable 'buffer-read-only) When using aliases in menus, often it is useful to display the equivalent key bindings for the "real" command name, not the aliases (which typically don't have any key bindings except for the menu itself). To request this, give the alias symbol a non-`nil' `menu-alias' property. Thus, (put 'make-read-only 'menu-alias t) (put 'make-writable 'menu-alias t) causes menu items for `make-read-only' and `make-writable' to show the keyboard bindings for `toggle-read-only'.  File: elisp, Node: Mouse Menus, Next: Keyboard Menus, Prev: Defining Menus, Up: Menu Keymaps Menus and the Mouse ------------------- The usual way to make a menu keymap produce a menu is to make it the definition of a prefix key. (A Lisp program can explicitly pop up a menu and receive the user's choice--see *Note Pop-Up Menus::.) If the prefix key ends with a mouse event, Emacs handles the menu keymap by popping up a visible menu, so that the user can select a choice with the mouse. When the user clicks on a menu item, the event generated is whatever character or symbol has the binding that brought about that menu item. (A menu item may generate a series of events if the menu has multiple levels or comes from the menu bar.) It's often best to use a button-down event to trigger the menu. Then the user can select a menu item by releasing the button. A single keymap can appear as multiple menu panes, if you explicitly arrange for this. The way to do this is to make a keymap for each pane, then create a binding for each of those maps in the main keymap of the menu. Give each of these bindings an item string that starts with `@'. The rest of the item string becomes the name of the pane. See the file `lisp/mouse.el' for an example of this. Any ordinary bindings with `@'-less item strings are grouped into one pane, which appears along with the other panes explicitly created for the submaps. X toolkit menus don't have panes; instead, they can have submenus. Every nested keymap becomes a submenu, whether the item string starts with `@' or not. In a toolkit version of Emacs, the only thing special about `@' at the beginning of an item string is that the `@' doesn't appear in the menu item. You can also produce multiple panes or submenus from separate keymaps. The full definition of a prefix key always comes from merging the definitions supplied by the various active keymaps (minor mode, local, and global). When more than one of these keymaps is a menu, each of them makes a separate pane or panes (when Emacs does not use an X-toolkit) or a separate submenu (when using an X-toolkit). *Note Active Keymaps::.  File: elisp, Node: Keyboard Menus, Next: Menu Example, Prev: Mouse Menus, Up: Menu Keymaps Menus and the Keyboard ---------------------- When a prefix key ending with a keyboard event (a character or function key) has a definition that is a menu keymap, the user can use the keyboard to choose a menu item. Emacs displays the menu's overall prompt string followed by the alternatives (the item strings of the bindings) in the echo area. If the bindings don't all fit at once, the user can type to see the next line of alternatives. Successive uses of eventually get to the end of the menu and then cycle around to the beginning. (The variable `menu-prompt-more-char' specifies which character is used for this; is the default.) When the user has found the desired alternative from the menu, he or she should type the corresponding character--the one whose binding is that alternative. This way of using menus in an Emacs-like editor was inspired by the Hierarkey system. - Variable: menu-prompt-more-char This variable specifies the character to use to ask to see the next line of a menu. Its initial value is 32, the code for .  File: elisp, Node: Menu Example, Next: Menu Bar, Prev: Keyboard Menus, Up: Menu Keymaps Menu Example ------------ Here is a complete example of defining a menu keymap. It is the definition of the `Print' submenu in the `Tools' menu in the menu bar, and it uses the simple menu item format (*note Simple Menu Items::). First we create the keymap, and give it a name: (defvar menu-bar-print-menu (make-sparse-keymap "Print")) Next we define the menu items: (define-key menu-bar-print-menu [ps-print-region] '("Postscript Print Region" . ps-print-region-with-faces)) (define-key menu-bar-print-menu [ps-print-buffer] '("Postscript Print Buffer" . ps-print-buffer-with-faces)) (define-key menu-bar-print-menu [separator-ps-print] '("--")) (define-key menu-bar-print-menu [print-region] '("Print Region" . print-region)) (define-key menu-bar-print-menu [print-buffer] '("Print Buffer" . print-buffer)) Note the symbols which the bindings are "made for"; these appear inside square brackets, in the key sequence being defined. In some cases, this symbol is the same as the command name; sometimes it is different. These symbols are treated as "function keys", but they are not real function keys on the keyboard. They do not affect the functioning of the menu itself, but they are "echoed" in the echo area when the user selects from the menu, and they appear in the output of `where-is' and `apropos'. The binding whose definition is `("--")' is a separator line. Like a real menu item, the separator has a key symbol, in this case `separator-ps-print'. If one menu has two separators, they must have two different key symbols. Here is code to define enable conditions for two of the commands in the menu: (put 'print-region 'menu-enable 'mark-active) (put 'ps-print-region-with-faces 'menu-enable 'mark-active) Here is how we make this menu appear as an item in the parent menu: (define-key menu-bar-tools-menu [print] (cons "Print" menu-bar-print-menu)) Note that this incorporates the submenu keymap, which is the value of the variable `menu-bar-print-menu', rather than the symbol `menu-bar-print-menu' itself. Using that symbol in the parent menu item would be meaningless because `menu-bar-print-menu' is not a command. If you wanted to attach the same print menu to a mouse click, you can do it this way: (define-key global-map [C-S-down-mouse-1] menu-bar-print-menu) We could equally well use an extended menu item (*note Extended Menu Items::) for `print-region', like this: (define-key menu-bar-print-menu [print-region] '(menu-item "Print Region" print-region :enable mark-active)) With the extended menu item, the enable condition is specified inside the menu item itself. If we wanted to make this item disappear from the menu entirely when the mark is inactive, we could do it this way: (define-key menu-bar-print-menu [print-region] '(menu-item "Print Region" print-region :visible mark-active))  File: elisp, Node: Menu Bar, Next: Tool Bar, Prev: Menu Example, Up: Menu Keymaps The Menu Bar ------------ Most window systems allow each frame to have a "menu bar"--a permanently displayed menu stretching horizontally across the top of the frame. The items of the menu bar are the subcommands of the fake "function key" `menu-bar', as defined by all the active keymaps. To add an item to the menu bar, invent a fake "function key" of your own (let's call it KEY), and make a binding for the key sequence `[menu-bar KEY]'. Most often, the binding is a menu keymap, so that pressing a button on the menu bar item leads to another menu. When more than one active keymap defines the same fake function key for the menu bar, the item appears just once. If the user clicks on that menu bar item, it brings up a single, combined menu containing all the subcommands of that item--the global subcommands, the local subcommands, and the minor mode subcommands. The variable `overriding-local-map' is normally ignored when determining the menu bar contents. That is, the menu bar is computed from the keymaps that would be active if `overriding-local-map' were `nil'. *Note Active Keymaps::. In order for a frame to display a menu bar, its `menu-bar-lines' parameter must be greater than zero. Emacs uses just one line for the menu bar itself; if you specify more than one line, the other lines serve to separate the menu bar from the windows in the frame. We recommend 1 or 2 as the value of `menu-bar-lines'. *Note Window Frame Parameters::. Here's an example of setting up a menu bar item: (modify-frame-parameters (selected-frame) '((menu-bar-lines . 2))) ;; Make a menu keymap (with a prompt string) ;; and make it the menu bar item's definition. (define-key global-map [menu-bar words] (cons "Words" (make-sparse-keymap "Words"))) ;; Define specific subcommands in this menu. (define-key global-map [menu-bar words forward] '("Forward word" . forward-word)) (define-key global-map [menu-bar words backward] '("Backward word" . backward-word)) A local keymap can cancel a menu bar item made by the global keymap by rebinding the same fake function key with `undefined' as the binding. For example, this is how Dired suppresses the `Edit' menu bar item: (define-key dired-mode-map [menu-bar edit] 'undefined) `edit' is the fake function key used by the global map for the `Edit' menu bar item. The main reason to suppress a global menu bar item is to regain space for mode-specific items. - Variable: menu-bar-final-items Normally the menu bar shows global items followed by items defined by the local maps. This variable holds a list of fake function keys for items to display at the end of the menu bar rather than in normal sequence. The default value is `(help-menu)'; thus, the `Help' menu item normally appears at the end of the menu bar, following local menu items. - Variable: menu-bar-update-hook This normal hook is run whenever the user clicks on the menu bar, before displaying a submenu. You can use it to update submenus whose contents should vary.  File: elisp, Node: Tool Bar, Next: Modifying Menus, Prev: Menu Bar, Up: Menu Keymaps Tool bars --------- A "tool bar" is a row of icons at the top of a frame, that execute commands when you click on them--in effect, a kind of graphical menu bar. Emacs supports tool bars starting with version 21. The frame parameter `tool-bar-lines' (X resource `toolBar') controls how many lines' worth of height to reserve for the tool bar. A zero value suppresses the tool bar. If the value is nonzero, and `auto-resize-tool-bars' is non-`nil', the tool bar expands and contracts automatically as needed to hold the specified contents. The tool bar contents are controlled by a menu keymap attached to a fake "function key" called `tool-bar' (much like the way the menu bar is controlled). So you define a tool bar item using `define-key', like this: (define-key global-map [tool-bar KEY] ITEM) where KEY is a fake "function key" to distinguish this item from other items, and ITEM is a menu item key binding (*note Extended Menu Items::), which says how to display this item and how it behaves. The usual menu keymap item properties, `:visible', `:enable', `:button', and `:filter', are useful in tool bar bindings and have their normal meanings. The REAL-BINDING in the item must be a command, not a keymap; in other words, it does not work to define a tool bar icon as a prefix key. The `:help' property specifies a "help-echo" string to display while the mouse is on that item. This is displayed in the same way as `help-echo' text properties (*note Help display::). In addition, you should use the `:image' property; this is how you specify the image to display in the tool bar: `:image IMAGE' IMAGES is either a single image specification or a vector of four image specifications. If you use a vector of four, one of them is used, depending on circumstances: item 0 Used when the item is enabled and selected. item 1 Used when the item is enabled and deselected. item 2 Used when the item is disabled and selected. item 3 Used when the item is disabled and deselected. If IMAGE is a single image specification, Emacs draws the tool bar button in disabled state by applying an edge-detection algorithm to the image. The default tool bar is defined so that items specific to editing do not appear for major modes whose command symbol has a `mode-class' property of `special' (*note Major Mode Conventions::). Major modes may add items to the global bar by binding `[tool-bar FOO]' in their local map. It makes sense for some major modes to replace the default tool bar items completely, since not many can be accommodated conveniently, and the default bindings make this easy by using an indirection through `tool-bar-map'. - Variable: tool-bar-map By default, the global map binds `[tool-bar]' as follows: (global-set-key [tool-bar] '(menu-item "tool bar" ignore :filter (lambda (ignore) tool-bar-map))) Thus the tool bar map is derived dynamically from the value of variable `tool-bar-map' and you should normally adjust the default (global) tool bar by changing that map. Major modes may replace the global bar completely by making `tool-bar-map' buffer-local and set to a keymap containing only the desired items. Info mode provides an example. There are two convenience functions for defining tool bar items, as follows. - Function: tool-bar-add-item icon def key &rest props This function adds an item to the tool bar by modifying `tool-bar-map'. The image to use is defined by ICON, which is the base name of an XPM, XBM or PBM image file to located by `find-image'. Given a value `"exit"', say, `exit.xpm', `exit.pbm' and `exit.xbm' would be searched for in that order on a color display. On a monochrome display, the search order is `.pbm', `.xbm' and `.xpm'. The binding to use is the command DEF, and KEY is the fake function key symbol in the prefix keymap. The remaining arguments PROPS are additional property list elements to add to the menu item specification. To define items in some local map, bind ``tool-bar-map' with `let' around calls of this function: (defvar foo-tool-bar-map (let ((tool-bar-map (make-sparse-keymap))) (tool-bar-add-item ...) ... tool-bar-map)) - Function: tool-bar-add-item-from-menu command icon &optional map &rest props This command is a convenience for defining tool bar items which are consistent with existing menu bar bindings. The binding of COMMAND is looked up in the menu bar in MAP (default `global-map') and modified to add an image specification for ICON, which is looked for in the same way as by `tool-bar-add-item'. The resulting binding is then placed in `tool-bar-map'. MAP must contain an appropriate keymap bound to `[menu-bar]'. The remaining arguments PROPS are additional property list elements to add to the menu item specification. - Variable: auto-resize-tool-bar If this variable is non-`nil', the tool bar automatically resizes to show all defined tool bar items--but not larger than a quarter of the frame's height. - Variable: auto-raise-tool-bar-items If this variable is non-`nil', tool bar items display in raised form when the mouse moves over them. - Variable: tool-bar-item-margin This variable specifies an extra margin to add around tool bar items. The value is an integer, a number of pixels. The default is 1. - Variable: tool-bar-item-relief This variable specifies the shadow width for tool bar items. The value is an integer, a number of pixels. The default is 3. You can define a special meaning for clicking on a tool bar item with the shift, control, meta, etc., modifiers. You do this by setting up additional items that relate to the original item through the fake function keys. Specifically, the additional items should use the modified versions of the same fake function key used to name the original item. Thus, if the original item was defined this way, (define-key global-map [tool-bar shell] '(menu-item "Shell" shell :image (image :type xpm :file "shell.xpm"))) then here is how you can define clicking on the same tool bar image with the shift modifier: (define-key global-map [tool-bar S-shell] 'some-command) *Note Function Keys::, for more information about how to add modifiers to function keys.  File: elisp, Node: Modifying Menus, Prev: Tool Bar, Up: Menu Keymaps Modifying Menus --------------- When you insert a new item in an existing menu, you probably want to put it in a particular place among the menu's existing items. If you use `define-key' to add the item, it normally goes at the front of the menu. To put it elsewhere in the menu, use `define-key-after': - Function: define-key-after map key binding &optional after Define a binding in MAP for KEY, with value BINDING, just like `define-key', but position the binding in MAP after the binding for the event AFTER. The argument KEY should be of length one--a vector or string with just one element. But AFTER should be a single event type--a symbol or a character, not a sequence. The new binding goes after the binding for AFTER. If AFTER is `t' or is omitted, then the new binding goes last, at the end of the keymap. However, new bindings are added before any inherited keymap. Here is an example: (define-key-after my-menu [drink] '("Drink" . drink-command) 'eat) makes a binding for the fake function key and puts it right after the binding for . Here is how to insert an item called `Work' in the `Signals' menu of Shell mode, after the item `break': (define-key-after (lookup-key shell-mode-map [menu-bar signals]) [work] '("Work" . work-command) 'break)  File: elisp, Node: Modes, Next: Documentation, Prev: Keymaps, Up: Top Major and Minor Modes ********************* A "mode" is a set of definitions that customize Emacs and can be turned on and off while you edit. There are two varieties of modes: "major modes", which are mutually exclusive and used for editing particular kinds of text, and "minor modes", which provide features that users can enable individually. This chapter describes how to write both major and minor modes, how to indicate them in the mode line, and how they run hooks supplied by the user. For related topics such as keymaps and syntax tables, see *Note Keymaps::, and *Note Syntax Tables::. * Menu: * Major Modes:: Defining major modes. * Minor Modes:: Defining minor modes. * Mode Line Format:: Customizing the text that appears in the mode line. * Imenu:: How a mode can provide a menu of definitions in the buffer. * Font Lock Mode:: How modes can highlight text according to syntax. * Hooks:: How to use hooks; how to write code that provides hooks.