#!/bin/sh
#
# This script was extracted from install.sh and deals with the fetching
# and unpacking of source/bootfile trees.  The first argument must be
# the installation root directory.  Subsequent arguments are the names
# of modules whose source trees are required.
#
# (C) 2003 The Fellowship of SML/NJ
#
# Author: Matthias Blume (blume@tti-c.org)
#

this=$0
ROOT=$1
shift

CONFIGDIR=$ROOT/config

VERSION=`cat "$CONFIGDIR"/version`
. "$CONFIGDIR"/srcarchiveurl

vsay() {
    if [ x${INSTALL_DEBUG} = xtrue ] ; then
	echo "$@"
    elif [ x${INSTALL_QUIETLY} = xtrue ] ; then
	:
    else
	echo "$@"
    fi
}

#
# Function for asking user to fetch source archive.
#   $1 - descriptive name
#   $2 - base name without extension, without version, and without dir
#   $3 - remote directory
#
askurl() {
    echo "$this: Please, fetch $1 archive"
    echo ' ('$2.'*' or $VERSION-$2.'*)'
    echo " from $3"
    echo " and then re-run this script!"
    exit 1
}

#
# Function for fetching source archives automatically using wget or lynx.
#   $1 - command to actually get the stuff
#   $2 - descriptive name
#   $3 - base name without extension and without dir
#   $4 - remote directory
#
fetchurl() {
    getter=$1 ; shift
    vsay $this: Fetching $1 from $3. Please stand by...
    fetched=no
    for base in $2 $VERSION-$2 ; do
	for ext in tgz tar.gz tar.Z tz tar tar.bz2 ; do
	    try=$base.$ext
	    vsay $this: Trying $try ...
	    if "$getter" "$3"/"$try" "$ROOT"/"$try" ; then
		fetched=yes
		vsay $this: Fetching $try was a success.
		break 2		# get out of both for-loops
	    else
		rm -f "$ROOT"/"$try"
	    fi
	done
    done
    if [ $fetched = no ] ; then
	echo $this: Fetching $try was no success.
	echo '  ' You should try to do it manually now.
	askurl "$1" "$2" "$3"
    fi
}

# wrapper for wget
usewget() {
    wget -nv -O "$2" "$1"
}

# wrapper for lynx
uselynx() {
    lynx -source "$1" >"$2"
}

# wrapper for curl
usecurl() {
    curl -s "$1" >"$2"
}

testurlgetter() {
    (exec >/dev/null 2>&1 ; exec $*)
}

#
# Function to check whether wget or lynx is available.
# Set URLGETTER accordingly.  URLGETTER can be set externally
# to either 'wget' or 'curl' or 'lynx' -- in which case the
# corresponding command will be used (properly wrapped).  Any
# other external setting will be passed directly to fetchurl (without
# wrapping -- meaning it must take precisely two argumets: source and
# destination, in that order).
#
urlgetter() {
    case ${URLGETTER:-unknown} in
	fetchurl*)
	    ;;
	unknown)
	    # automatically figure out which wrapper to use
	    if testurlgetter wget --help ; then
		URLGETTER="fetchurl usewget"
	    elif testurlgetter curl -s -O file:///dev/null -o /dev/null ; then
		URLGETTER="fetchurl usecurl"
	    elif testurlgetter lynx -help ; then
		URLGETTER="fetchurl uselynx"
	    else
		URLGETTER="askurl"
	    fi
	    ;;
	wget|curl|lynx)
	    # special getters we know how to wrap
	    URLGETTER="fetchurl use${URLGETTER}"
	    ;;
	*)
	    # other -- must be able to work without wrapper
	    URLGETTER="fetchurl ${URLGETTER}"
	    ;;
    esac
}

# wrapper for tar
un_tar() {
    vsay "$this: Un-TAR-ing $1 archive."
    tar -xf "$2"
}

# wrapper for zcat followed by tar
un_tar_Z() {
    vsay "$this: Un-COMPRESS-ing and un-TAR-ing $1 archive."
    zcat "$2" | tar -xf -
}

# wrapper for gunzip followed by tar
un_tar_gz() {
    vsay "$this: Un-GZIP-ing and un-TAR-ing $1 archive."
    gunzip -c "$2" | tar -xf -
}

# wrapper for bunzip2 followed by tar
un_tar_bz2() {
    vsay "$this: Un-BZIP2-ing and un-TAR-ing $1 archive."
    bunzip2 -c "$2" | tar -xf -
}

# unarchive archive without and with version number attached
unarchive() {
    # $1: descriptive string, $2: archive, $3: unpacker
    if [ -r "$ROOT"/"$2" ] ; then
	"$3" "$1" "$ROOT"/"$2"
    elif [ -r "$ROOT"/"$VERSION"-"$2" ]; then
	$3 "$1" "$ROOT"/"$VERSION"-"$2"
    else
	return 1
    fi
}

#
# Function to unpack a source archive.
#
# $1: descriptive name of the sources to be unpacked
# $2: the directory into which to unpack the sources
# $3: the sub-directory of $2 that is going to be created by unpacking
# $4: the basename of the source archive (the script will check several
#     different suffixes to determine what kind of de-compression is to
#     be used)
#
# fetch_n_unpack is the helper function that does the real work.  If
# no archive is found locally, it invokes $URLGETTER and tries again.
# The variable $tryfetch is used to make sure this happens only once.
fetch_n_unpack() {
    cd "$2"
    if unarchive "$1" "$4".tgz un_tar_gz ||
       unarchive "$1" "$4".tar.gz un_tar_gz ||
       unarchive "$1" "$4".tar.Z un_tar_Z ||
       unarchive "$1" "$4".tar un_tar ||
       unarchive "$1" "$4".tar.bz2 un_tar_bz2 ||
       unarchive "$1" "$4".tz un_tar_Z
    then
	: we are done
    elif [ $tryfetch = yes ] ; then
	urlgetter
	$URLGETTER "$1" "$4" "$SRCARCHIVEURL"
	tryfetch=no
	fetch_n_unpack "$1" "$2" "$3" "$4"
    fi
}

#
# The main "unpack" driver function that invokes the above helper.
#
unpack() {
    tryfetch=yes
    if [ -d "$2"/"$3" ]; then
	vsay "$this: The $1 tree already exists."
    else
	fetch_n_unpack "$1" "$2" "$3" "$4"
    fi
    if [ ! -d "$2"/"$3" ]; then
	echo "$this: !!! Unable to unpack $1 archive."
	exit 1
    fi
}

#
# Now do it:
#

for i
do
    case "$i" in
      runtime)
        unpack run-time "$ROOT"/base runtime runtime
	;;
      boot.*)
        unpack bootfiles "$ROOT" sml.$i $i
	;;
      compiler)
	unpack compiler "$ROOT"/base compiler compiler
	;;
      cm)
	unpack compiler "$ROOT"/base cm cm
	;;
      system)
	unpack compiler "$ROOT"/base system system
	;;
      ml-yacc|ml-yacc-grm-ext)
	unpack ML-Yacc "$ROOT" ml-yacc ml-yacc
	;;
      ml-lex|ml-lex-mllex-tool|ml-lex-lex-ext)
	unpack ML-Lex "$ROOT" ml-lex ml-lex
	;;
      ml-burg)
        unpack ML-Burg "$ROOT" ml-burg ml-burg
	;;
      smlnj-lib)
        unpack "SML/NJ Library" "$ROOT" smlnj-lib smlnj-lib
	;;
      cml|cml-lib)
        unpack CML "$ROOT" cml cml
	;;
      eXene)
        unpack EXene "$ROOT" eXene eXene
	;;
      ckit)
        unpack "C-Kit" "$ROOT" ckit ckit
	;;
      ml-nlffi-lib|ml-nlffigen)
        unpack "NLFFI" "$ROOT" nlffi nlffi
	;;
      pgraph-util)
	unpack "CM source code" "$ROOT" pgraph pgraph
	;;
      tdp-util)
        unpack "Trace/Debug/Profile code" "$ROOT" trace-debug-profile trace-debug-profile
	;;
      mlrisc|mlrisc-tools|nowhere)
	unpack "MLRISC Library" "$ROOT" MLRISC MLRISC
	;;
      smlnj-c)
	unpack "SML/NJ-C FFI" "$ROOT" smlnj-c smlnj-c
	;;
      heap2asm)
	unpack "Heap->ASM tool" "$ROOT" heap2asm heap2asm
	;;
      ml-ulex|ml-ulex-mllex-tool|ml-ulex-lex-ext)
	unpack "new unicode lexer generator" "$ROOT" ml-lpt ml-lpt
	;;
      ml-antlr|ml-antlr-grm-ext)
	unpack "new LL(k) parser generator" "$ROOT" ml-lpt ml-lpt
	;;
      ml-lpt-lib)
	unpack "utilities for language processing tools" "$ROOT" ml-lpt ml-lpt
	;;
      doc)
	echo Package doc is currently unavailable.
	# unpack Doc $ROOT doc doc
        # cd $ROOT/doc
	# build $ROOT
	;;
      *)
	echo Unknown package: ${i}.
	echo Trying default method...
	unpack ${i} "$ROOT" ${i} ${i}
	;;
    esac
done

exit 0