# Makefile.in generated by automake 1.10 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Id: Makefile.am 6676 2007-07-28 13:02:00Z m-a $ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ noinst_PROGRAMS = bogogrep$(EXEEXT) $(am__EXEEXT_1) @ENABLE_STATIC_TRUE@am__append_1 = bogogrep_static subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/bogofilter.spec.in \ $(top_srcdir)/configure AUTHORS COPYING INSTALL NEWS TODO \ compile config.guess config.rpath config.sub depcomp \ install-sh missing mkinstalldirs ylwrap ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gsl.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/config.h CONFIG_CLEAN_FILES = bogofilter.spec @ENABLE_STATIC_TRUE@am__EXEEXT_1 = bogogrep_static$(EXEEXT) PROGRAMS = $(noinst_PROGRAMS) am_bogogrep_OBJECTS = bogogrep.$(OBJEXT) bogogrep_OBJECTS = $(am_bogogrep_OBJECTS) bogogrep_LDADD = $(LDADD) am__bogogrep_static_SOURCES_DIST = contrib/bogogrep.c @ENABLE_STATIC_TRUE@am_bogogrep_static_OBJECTS = bogogrep.$(OBJEXT) bogogrep_static_OBJECTS = $(am_bogogrep_static_OBJECTS) bogogrep_static_LDADD = $(LDADD) bogogrep_static_LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(bogogrep_static_LDFLAGS) $(LDFLAGS) -o $@ DEFAULT_INCLUDES = -I. -I$(top_builddir)/src@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(bogogrep_SOURCES) $(bogogrep_static_SOURCES) DIST_SOURCES = $(bogogrep_SOURCES) $(am__bogogrep_static_SOURCES_DIST) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(sysconfdir)" sysconfDATA_INSTALL = $(INSTALL_DATA) DATA = $(sysconf_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DB_EXT = @DB_EXT@ DB_TYPE = @DB_TYPE@ DEFAULT_CHARSET = @DEFAULT_CHARSET@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENCODING = @ENCODING@ EXEEXT = @EXEEXT@ EXE_EXT = @EXE_EXT@ GREP = @GREP@ GSL_CFLAGS = @GSL_CFLAGS@ GSL_CONFIG = @GSL_CONFIG@ GSL_LIBS = @GSL_LIBS@ HAVE_EXTENDED_PRECISION_REGISTERS = @HAVE_EXTENDED_PRECISION_REGISTERS@ HAVE_EXTERN_INLINE = @HAVE_EXTERN_INLINE@ HAVE_INLINE = @HAVE_INLINE@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBDB = @LIBDB@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBQDBM = @LIBQDBM@ LIBS = @LIBS@ LIBSQLITE3 = @LIBSQLITE3@ LIBTOKYOCABINET = @LIBTOKYOCABINET@ LTLIBDB = @LTLIBDB@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ LTLIBQDBM = @LTLIBQDBM@ LTLIBSQLITE3 = @LTLIBSQLITE3@ LTLIBTOKYOCABINET = @LTLIBTOKYOCABINET@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ NSGMLS = @NSGMLS@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ RANLIB = @RANLIB@ RPMBUILD = @RPMBUILD@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STATICLDFLAGS = @STATICLDFLAGS@ STATIC_DB = @STATIC_DB@ STRIP = @STRIP@ USE_TRANSACTIONS = @USE_TRANSACTIONS@ USE_UNICODE = @USE_UNICODE@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_cv_enable_xmlto = @ac_cv_enable_xmlto@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # search path for m4 macros ACLOCAL_AMFLAGS = -I m4 SUBDIRS = trio src . doc SYSCONFDIR = @sysconfdir@ # what to build sysconf_DATA = bogofilter.cf.example # what to distribute EXTRA_DIST = autogen.sh gsl config.rpath bogofilter.cf.example \ bogofilter.spec bogofilter.spec.in Doxyfile gpl-3.0.txt \ gnugetopt GETTING.STARTED NEWS.0 README.svn RELEASE.NOTES \ install-staticdblibs.sh contrib/README.contrib \ contrib/README.randomtrain contrib/bogo.R contrib/bfproxy.pl \ contrib/bogofilter-milter.pl contrib/bogofilter-qfe.sh \ contrib/bogominitrain.pl contrib/dot-qmail-bogofilter-default \ contrib/mailfilter.example contrib/mime.get.rfc822.pl \ contrib/parmtest.sh contrib/printmaildir.pl \ contrib/procmailrc.example contrib/randomtrain.sh \ contrib/scramble.sh contrib/spamitarium.pl \ contrib/stripsearch.pl contrib/trainbogo.sh \ contrib/vm-bogofilter.el # # RPM building - there are some cheats here # # BF_ZAP_LIBDB is a magic variable we check from configure.ac, # which zaps LIBDB and allows us to override the library choice # through LIBS=... # # Passing -ldb-4.2 (for the second -tb line) will fail on systems that # don't have libdb-4.2.* in the default library path that "ld" uses. # Install your system's db42 and db42-devel packages and retry. # Using -ldb-4.2 is indispensable as systems with db 4.3 or 4.4 would # otherwise pick the newer one as their default, but we must match # the library between shared and static RPM so that users can switch # forth and back without difficulties such as dumping and reloading # the database. # # CPPFLAGS=-D__NO_CTYPE tells glibc to use the older glibc 2.2.X # ctype implementation (functions). Else glibc would use a newer # 2.3.X ctype implementation, and as this is the only module that # requires 2.3.X in our code, we just use the 2.2.X version instead. # This works up to and including 2.3.5, the newest glibc version # available at the time this code was written. # # RPM and GPG-AGENT # ================= # Using the GnuPG agent requires some fiddling, as RPM has no native # support. # # 1. add these lines to your ~/.rpmmacros: # # %__gpg_check_password_cmd %{__gpg} gpg --batch --no-verbose \ # --use-agent -u "%{_gpg_name}" -so - # %__gpg_sign_cmd %{__gpg} gpg --batch --no-verbose \ # --no-armor --use-agent --no-secmem-warning -u "%{_gpg_name}" \ # -sbo %{__signature_filename} %{__plaintext_filename} # # 2. launch the GnuPG agent, unless already running: # eval $(gpg-agent --sh --daemon) # # 3. run "setsid make rpm /dev/null" # DBPFX = /opt/db-4.2-lean SQPFX = /opt/sqlite-3-lean DBLIB = $(DBPFX)/lib/libdb.a SQLIB = $(SQPFX)/lib/libsqlite3.a DEF_DB42 = --define 'with_db42 1' DEF_SQLITE = --define 'with_sqlite 1' DEF_STATIC = --define 'bf_nameext -static' SIGN = --sign bogogrep_SOURCES = contrib/bogogrep.c @ENABLE_STATIC_TRUE@bogogrep_static_SOURCES = contrib/bogogrep.c @ENABLE_STATIC_TRUE@bogogrep_static_LDFLAGS = $(STATICLDFLAGS) all: all-recursive .SUFFIXES: .SUFFIXES: .c .o .obj am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) bogofilter.spec: $(top_builddir)/config.status $(srcdir)/bogofilter.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ clean-noinstPROGRAMS: -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) bogogrep$(EXEEXT): $(bogogrep_OBJECTS) $(bogogrep_DEPENDENCIES) @rm -f bogogrep$(EXEEXT) $(LINK) $(bogogrep_OBJECTS) $(bogogrep_LDADD) $(LIBS) bogogrep_static$(EXEEXT): $(bogogrep_static_OBJECTS) $(bogogrep_static_DEPENDENCIES) @rm -f bogogrep_static$(EXEEXT) $(bogogrep_static_LINK) $(bogogrep_static_OBJECTS) $(bogogrep_static_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bogogrep.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` bogogrep.o: contrib/bogogrep.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bogogrep.o -MD -MP -MF $(DEPDIR)/bogogrep.Tpo -c -o bogogrep.o `test -f 'contrib/bogogrep.c' || echo '$(srcdir)/'`contrib/bogogrep.c @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/bogogrep.Tpo $(DEPDIR)/bogogrep.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='contrib/bogogrep.c' object='bogogrep.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bogogrep.o `test -f 'contrib/bogogrep.c' || echo '$(srcdir)/'`contrib/bogogrep.c bogogrep.obj: contrib/bogogrep.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bogogrep.obj -MD -MP -MF $(DEPDIR)/bogogrep.Tpo -c -o bogogrep.obj `if test -f 'contrib/bogogrep.c'; then $(CYGPATH_W) 'contrib/bogogrep.c'; else $(CYGPATH_W) '$(srcdir)/contrib/bogogrep.c'; fi` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/bogogrep.Tpo $(DEPDIR)/bogogrep.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='contrib/bogogrep.c' object='bogogrep.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bogogrep.obj `if test -f 'contrib/bogogrep.c'; then $(CYGPATH_W) 'contrib/bogogrep.c'; else $(CYGPATH_W) '$(srcdir)/contrib/bogogrep.c'; fi` install-sysconfDATA: $(sysconf_DATA) @$(NORMAL_INSTALL) test -z "$(sysconfdir)" || $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" @list='$(sysconf_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(sysconfDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(sysconfdir)/$$f'"; \ $(sysconfDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(sysconfdir)/$$f"; \ done uninstall-sysconfDATA: @$(NORMAL_UNINSTALL) @list='$(sysconf_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(sysconfdir)/$$f'"; \ rm -f "$(DESTDIR)$(sysconfdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(sysconfdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-exec-am: install-sysconfDATA install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-sysconfDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ clean-noinstPROGRAMS ctags ctags-recursive dist dist-all \ dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ dist-zip \ distcheck distclean distclean-compile distclean-generic \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ install-sysconfDATA installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-sysconfDATA # ChangeLog, cvs2cl lives at http://www.red-bean.com/cvs2cl .PHONY: $(srcdir)/changelog.txt $(srcdir)/changelog.txt: test -f $@ || : >$@ || { rm -f $@ ; exit 1; } ( cd $(srcdir) && cvs2cl.pl --fsf --accum --utc --file changelog.txt ) .PHONY: check rpm svn-check # rpm: dist @echo @echo "Note: if 'make rpm' fails, check the top-level Makefile.am for documentation." @echo @echo "Note: see Makefile.am comments for information on how to use the GnuPG agent." @echo @sleep 5 $(RPMBUILD) $(SIGN) -ts $(distdir).tar.gz if test ! -f $(DBLIB) || test ! -f $(SQLIB) || objdump -t $(SQLIB) | grep -q __ctype_b_loc ; then \ echo >&2 "Please run the install-staticdblibs.sh script first." ; exit 1 ; fi BF_ZAP_LIBDB=zap CPPFLAGS="-D__NO_CTYPE -I$(DBPFX)/include" LIBS=$(DBLIB) \ $(RPMBUILD) $(DEF_STATIC) $(DEF_DB42) $(SIGN) -tb $(distdir).tar.gz BF_ZAP_LIBDB=zap CPPFLAGS="-D__NO_CTYPE -I$(SQPFX)/include" LIBS=$(SQLIB) \ $(RPMBUILD) $(DEF_STATIC) $(DEF_SQLITE) $(SIGN) -tb $(distdir).tar.gz @echo @echo "Now building the shared database library RPMs - this may fail" @echo "if system-wide library installs of BerkeleyDB 4.2 or SQLite 3" @echo "are missing from your system. The static RPMs that have just" @echo "been built are ready to go however." @echo @sleep 5 - CPPFLAGS="-D__NO_CTYPE -I$(DBPFX)" LIBS=-ldb-4.2 \ $(RPMBUILD) $(DEF_DB42) $(SIGN) -tb $(distdir).tar.gz - CPPFLAGS="-D__NO_CTYPE -I$(SQPFX)" \ $(RPMBUILD) $(DEF_SQLITE) $(SIGN) -tb $(distdir).tar.gz svn-check: rm -rf $(PACKAGE)-$(VERSION)-export svn export -rBASE $(srcdir) $(PACKAGE)-$(VERSION)-export cd $(PACKAGE)-$(VERSION)-export && autoreconf -i -f -s -v \ && ./configure && make distcheck # this target expects a .rsyncs file with lines of this format: # host:directory/ # it will call rsync from its source directory to the destination for # each of them, running them in parallel .PHONY: rsync rsynconly rsync: distdir rsynconly rsynconly: .rsyncs @( cat $(srcdir)/.rsyncs | sed -e 's}^}rsync -av -e ssh --delete $(PACKAGE)-$(VERSION)/ }; s/\($$\)/ \&/;' ; echo "wait" ) | $(SHELL) -x dist-hook: cd $(distdir) && find doc gnugetopt gsl -name CVS -type d -prune -exec rm -r '{}' ';' cd $(distdir) && find doc gnugetopt gsl -name '.#*' -type f -exec rm '{}' ';' rm -f $(distdir)/doc/.cvsignore $(distdir)/ChangeLog # --------------------------------------------------------------------- # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: