# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# $Id: Makefile.am 6676 2007-07-28 13:02:00Z m-a $
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
noinst_PROGRAMS = bogogrep$(EXEEXT) $(am__EXEEXT_1)
@ENABLE_STATIC_TRUE@am__append_1 = bogogrep_static
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/bogofilter.spec.in \
$(top_srcdir)/configure AUTHORS COPYING INSTALL NEWS TODO \
compile config.guess config.rpath config.sub depcomp \
install-sh missing mkinstalldirs ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gsl.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
$(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES = bogofilter.spec
@ENABLE_STATIC_TRUE@am__EXEEXT_1 = bogogrep_static$(EXEEXT)
PROGRAMS = $(noinst_PROGRAMS)
am_bogogrep_OBJECTS = bogogrep.$(OBJEXT)
bogogrep_OBJECTS = $(am_bogogrep_OBJECTS)
bogogrep_LDADD = $(LDADD)
am__bogogrep_static_SOURCES_DIST = contrib/bogogrep.c
@ENABLE_STATIC_TRUE@am_bogogrep_static_OBJECTS = bogogrep.$(OBJEXT)
bogogrep_static_OBJECTS = $(am_bogogrep_static_OBJECTS)
bogogrep_static_LDADD = $(LDADD)
bogogrep_static_LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(bogogrep_static_LDFLAGS) $(LDFLAGS) -o $@
DEFAULT_INCLUDES = -I. -I$(top_builddir)/src@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(bogogrep_SOURCES) $(bogogrep_static_SOURCES)
DIST_SOURCES = $(bogogrep_SOURCES) $(am__bogogrep_static_SOURCES_DIST)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(sysconfdir)"
sysconfDATA_INSTALL = $(INSTALL_DATA)
DATA = $(sysconf_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DB_EXT = @DB_EXT@
DB_TYPE = @DB_TYPE@
DEFAULT_CHARSET = @DEFAULT_CHARSET@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENCODING = @ENCODING@
EXEEXT = @EXEEXT@
EXE_EXT = @EXE_EXT@
GREP = @GREP@
GSL_CFLAGS = @GSL_CFLAGS@
GSL_CONFIG = @GSL_CONFIG@
GSL_LIBS = @GSL_LIBS@
HAVE_EXTENDED_PRECISION_REGISTERS = @HAVE_EXTENDED_PRECISION_REGISTERS@
HAVE_EXTERN_INLINE = @HAVE_EXTERN_INLINE@
HAVE_INLINE = @HAVE_INLINE@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBDB = @LIBDB@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBQDBM = @LIBQDBM@
LIBS = @LIBS@
LIBSQLITE3 = @LIBSQLITE3@
LIBTOKYOCABINET = @LIBTOKYOCABINET@
LTLIBDB = @LTLIBDB@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
LTLIBQDBM = @LTLIBQDBM@
LTLIBSQLITE3 = @LTLIBSQLITE3@
LTLIBTOKYOCABINET = @LTLIBTOKYOCABINET@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NSGMLS = @NSGMLS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
RANLIB = @RANLIB@
RPMBUILD = @RPMBUILD@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STATICLDFLAGS = @STATICLDFLAGS@
STATIC_DB = @STATIC_DB@
STRIP = @STRIP@
USE_TRANSACTIONS = @USE_TRANSACTIONS@
USE_UNICODE = @USE_UNICODE@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_cv_enable_xmlto = @ac_cv_enable_xmlto@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# search path for m4 macros
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = trio src . doc
SYSCONFDIR = @sysconfdir@
# what to build
sysconf_DATA = bogofilter.cf.example
# what to distribute
EXTRA_DIST = autogen.sh gsl config.rpath bogofilter.cf.example \
bogofilter.spec bogofilter.spec.in Doxyfile gpl-3.0.txt \
gnugetopt GETTING.STARTED NEWS.0 README.svn RELEASE.NOTES \
install-staticdblibs.sh contrib/README.contrib \
contrib/README.randomtrain contrib/bogo.R contrib/bfproxy.pl \
contrib/bogofilter-milter.pl contrib/bogofilter-qfe.sh \
contrib/bogominitrain.pl contrib/dot-qmail-bogofilter-default \
contrib/mailfilter.example contrib/mime.get.rfc822.pl \
contrib/parmtest.sh contrib/printmaildir.pl \
contrib/procmailrc.example contrib/randomtrain.sh \
contrib/scramble.sh contrib/spamitarium.pl \
contrib/stripsearch.pl contrib/trainbogo.sh \
contrib/vm-bogofilter.el
#
# RPM building - there are some cheats here
#
# BF_ZAP_LIBDB is a magic variable we check from configure.ac,
# which zaps LIBDB and allows us to override the library choice
# through LIBS=...
#
# Passing -ldb-4.2 (for the second -tb line) will fail on systems that
# don't have libdb-4.2.* in the default library path that "ld" uses.
# Install your system's db42 and db42-devel packages and retry.
# Using -ldb-4.2 is indispensable as systems with db 4.3 or 4.4 would
# otherwise pick the newer one as their default, but we must match
# the library between shared and static RPM so that users can switch
# forth and back without difficulties such as dumping and reloading
# the database.
#
# CPPFLAGS=-D__NO_CTYPE tells glibc to use the older glibc 2.2.X
# ctype implementation (functions). Else glibc would use a newer
# 2.3.X ctype implementation, and as this is the only module that
# requires 2.3.X in our code, we just use the 2.2.X version instead.
# This works up to and including 2.3.5, the newest glibc version
# available at the time this code was written.
#
# RPM and GPG-AGENT
# =================
# Using the GnuPG agent requires some fiddling, as RPM has no native
# support.
#
# 1. add these lines to your ~/.rpmmacros:
#
# %__gpg_check_password_cmd %{__gpg} gpg --batch --no-verbose \
# --use-agent -u "%{_gpg_name}" -so -
# %__gpg_sign_cmd %{__gpg} gpg --batch --no-verbose \
# --no-armor --use-agent --no-secmem-warning -u "%{_gpg_name}" \
# -sbo %{__signature_filename} %{__plaintext_filename}
#
# 2. launch the GnuPG agent, unless already running:
# eval $(gpg-agent --sh --daemon)
#
# 3. run "setsid make rpm </dev/null >/dev/null"
#
DBPFX = /opt/db-4.2-lean
SQPFX = /opt/sqlite-3-lean
DBLIB = $(DBPFX)/lib/libdb.a
SQLIB = $(SQPFX)/lib/libsqlite3.a
DEF_DB42 = --define 'with_db42 1'
DEF_SQLITE = --define 'with_sqlite 1'
DEF_STATIC = --define 'bf_nameext -static'
SIGN = --sign
bogogrep_SOURCES = contrib/bogogrep.c
@ENABLE_STATIC_TRUE@bogogrep_static_SOURCES = contrib/bogogrep.c
@ENABLE_STATIC_TRUE@bogogrep_static_LDFLAGS = $(STATICLDFLAGS)
all: all-recursive
.SUFFIXES:
.SUFFIXES: .c .o .obj
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
bogofilter.spec: $(top_builddir)/config.status $(srcdir)/bogofilter.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
clean-noinstPROGRAMS:
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
bogogrep$(EXEEXT): $(bogogrep_OBJECTS) $(bogogrep_DEPENDENCIES)
@rm -f bogogrep$(EXEEXT)
$(LINK) $(bogogrep_OBJECTS) $(bogogrep_LDADD) $(LIBS)
bogogrep_static$(EXEEXT): $(bogogrep_static_OBJECTS) $(bogogrep_static_DEPENDENCIES)
@rm -f bogogrep_static$(EXEEXT)
$(bogogrep_static_LINK) $(bogogrep_static_OBJECTS) $(bogogrep_static_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bogogrep.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
bogogrep.o: contrib/bogogrep.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bogogrep.o -MD -MP -MF $(DEPDIR)/bogogrep.Tpo -c -o bogogrep.o `test -f 'contrib/bogogrep.c' || echo '$(srcdir)/'`contrib/bogogrep.c
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/bogogrep.Tpo $(DEPDIR)/bogogrep.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='contrib/bogogrep.c' object='bogogrep.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bogogrep.o `test -f 'contrib/bogogrep.c' || echo '$(srcdir)/'`contrib/bogogrep.c
bogogrep.obj: contrib/bogogrep.c
@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bogogrep.obj -MD -MP -MF $(DEPDIR)/bogogrep.Tpo -c -o bogogrep.obj `if test -f 'contrib/bogogrep.c'; then $(CYGPATH_W) 'contrib/bogogrep.c'; else $(CYGPATH_W) '$(srcdir)/contrib/bogogrep.c'; fi`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/bogogrep.Tpo $(DEPDIR)/bogogrep.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='contrib/bogogrep.c' object='bogogrep.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bogogrep.obj `if test -f 'contrib/bogogrep.c'; then $(CYGPATH_W) 'contrib/bogogrep.c'; else $(CYGPATH_W) '$(srcdir)/contrib/bogogrep.c'; fi`
install-sysconfDATA: $(sysconf_DATA)
@$(NORMAL_INSTALL)
test -z "$(sysconfdir)" || $(MKDIR_P) "$(DESTDIR)$(sysconfdir)"
@list='$(sysconf_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(sysconfDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(sysconfdir)/$$f'"; \
$(sysconfDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(sysconfdir)/$$f"; \
done
uninstall-sysconfDATA:
@$(NORMAL_UNINSTALL)
@list='$(sysconf_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(sysconfdir)/$$f'"; \
rm -f "$(DESTDIR)$(sysconfdir)/$$f"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d $(distdir) || mkdir $(distdir)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(PROGRAMS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(sysconfdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-exec-am: install-sysconfDATA
install-html: install-html-recursive
install-info: install-info-recursive
install-man:
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-sysconfDATA
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-noinstPROGRAMS ctags ctags-recursive dist dist-all \
dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ dist-zip \
distcheck distclean distclean-compile distclean-generic \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
install-sysconfDATA installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-sysconfDATA
# ChangeLog, cvs2cl lives at http://www.red-bean.com/cvs2cl
.PHONY: $(srcdir)/changelog.txt
$(srcdir)/changelog.txt:
test -f $@ || : >$@ || { rm -f $@ ; exit 1; }
( cd $(srcdir) && cvs2cl.pl --fsf --accum --utc --file changelog.txt )
.PHONY: check rpm svn-check
#
rpm: dist
@echo
@echo "Note: if 'make rpm' fails, check the top-level Makefile.am for documentation."
@echo
@echo "Note: see Makefile.am comments for information on how to use the GnuPG agent."
@echo
@sleep 5
$(RPMBUILD) $(SIGN) -ts $(distdir).tar.gz
if test ! -f $(DBLIB) || test ! -f $(SQLIB) || objdump -t $(SQLIB) | grep -q __ctype_b_loc ; then \
echo >&2 "Please run the install-staticdblibs.sh script first." ; exit 1 ; fi
BF_ZAP_LIBDB=zap CPPFLAGS="-D__NO_CTYPE -I$(DBPFX)/include" LIBS=$(DBLIB) \
$(RPMBUILD) $(DEF_STATIC) $(DEF_DB42) $(SIGN) -tb $(distdir).tar.gz
BF_ZAP_LIBDB=zap CPPFLAGS="-D__NO_CTYPE -I$(SQPFX)/include" LIBS=$(SQLIB) \
$(RPMBUILD) $(DEF_STATIC) $(DEF_SQLITE) $(SIGN) -tb $(distdir).tar.gz
@echo
@echo "Now building the shared database library RPMs - this may fail"
@echo "if system-wide library installs of BerkeleyDB 4.2 or SQLite 3"
@echo "are missing from your system. The static RPMs that have just"
@echo "been built are ready to go however."
@echo
@sleep 5
- CPPFLAGS="-D__NO_CTYPE -I$(DBPFX)" LIBS=-ldb-4.2 \
$(RPMBUILD) $(DEF_DB42) $(SIGN) -tb $(distdir).tar.gz
- CPPFLAGS="-D__NO_CTYPE -I$(SQPFX)" \
$(RPMBUILD) $(DEF_SQLITE) $(SIGN) -tb $(distdir).tar.gz
svn-check:
rm -rf $(PACKAGE)-$(VERSION)-export
svn export -rBASE $(srcdir) $(PACKAGE)-$(VERSION)-export
cd $(PACKAGE)-$(VERSION)-export && autoreconf -i -f -s -v \
&& ./configure && make distcheck
# this target expects a .rsyncs file with lines of this format:
# host:directory/
# it will call rsync from its source directory to the destination for
# each of them, running them in parallel
.PHONY: rsync rsynconly
rsync: distdir rsynconly
rsynconly: .rsyncs
@( cat $(srcdir)/.rsyncs | sed -e 's}^}rsync -av -e ssh --delete $(PACKAGE)-$(VERSION)/ }; s/\($$\)/ \&/;' ; echo "wait" ) | $(SHELL) -x
dist-hook:
cd $(distdir) && find doc gnugetopt gsl -name CVS -type d -prune -exec rm -r '{}' ';'
cd $(distdir) && find doc gnugetopt gsl -name '.#*' -type f -exec rm '{}' ';'
rm -f $(distdir)/doc/.cvsignore $(distdir)/ChangeLog
# ---------------------------------------------------------------------
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1