/* This software was developed by Bruce Hendrickson and Robert Leland   *
 * at Sandia National Laboratories under US Department of Energy        *
 * contract DE-AC04-76DP00789 and is copyrighted by Sandia Corporation. */

#include	<stdio.h>
#include	<string.h>
#include	"defs.h"
#include	"params.h"


void      input_queries(fin, fingeom, finassign, inname, geomname, inassignname,
			          outassignname, outfilename,
			          architecture, ndims_tot, mesh_dims,
		             global_method, local_method, rqi_flag, vmax, ndims)
FILE    **fin;			/* input file */
FILE    **fingeom;		/* geometry input file (for inertial method) */
FILE    **finassign;		/* assignment input file (if just simulating) */
char     *inname;		/* name of graph input file */
char     *geomname;		/* name of geometry input file */
char     *inassignname;		/* name of assignment input file */
char     *outassignname;	/* name of assignment output file */
char     *outfilename;		/* name of file for outputing run results */
int      *architecture;		/* 0=> hypercube, d=> d-dimensional mesh */
int      *ndims_tot;		/* target number of hypercube dimensions */
int       mesh_dims[3];		/* mesh dimensions */
int      *global_method;	/* what global partitioning strategy to use? */
int      *local_method;		/* what local refinement strategy to use? */
int      *rqi_flag;		/* should I use multilevel eigensolver? */
int      *vmax;			/* if so, how far should I coarsen? */
int      *ndims;		/* number of divisions at each stage */
{
    extern int SEQUENCE;	/* sequence instead of partition graph? */
    extern int ARCHITECTURE;	/* 0=> hypercube, d=> d-dimensional mesh */
    extern int OUTPUT_ASSIGN;	/* write assignments to file? */
    extern int ECHO;		/* copy input to screen? results to file? */
    extern int DEBUG_TRACE;	/* trace main execution path */
    extern int PROMPT;		/* prompt for input? */
    extern int MATCH_TYPE;      /* max-matching routine to call */
    int       eigensolver;	/* which kind of eigensolver to use */
    int       nprocs;		/* number of processors being divided into */

    int       input_int();

    if (DEBUG_TRACE > 0) {
	printf("<Entering input_queries>\n");
    }

    *architecture = ARCHITECTURE;

    /* Name and open input graph file. */
    *fin = NULL;
    while (*fin == NULL) {
	if (PROMPT)
	    printf("Graph input file: ");
	scanf("%s", inname);

	*fin = fopen(inname, "r");
	if (*fin == NULL) {
	    printf("Graph file `%s' not found.\n", inname);
	}
    }

    /* Name output assignment file. */
    if (OUTPUT_ASSIGN && !SEQUENCE) {
	if (PROMPT)
	    printf("Assignment output file: ");
	scanf("%s", outassignname);
    }

    /* Name output results file. */
    if (ECHO < 0) {
	if (PROMPT)
	    printf("File name for saving run results: ");
	scanf("%s", outfilename);
    }

    /* Initialize the method flags */
    *rqi_flag = 0;
    *global_method = 0;
    *fingeom = NULL;
    *finassign = NULL;

    /* Get global method, if any. */
    if (SEQUENCE) {
	*global_method = 2;
    }
    else {
        while (*global_method < 1 || *global_method > 7) {
	    if (PROMPT) {
	        printf("Global partitioning method:\n");
	        printf("  (1) Multilevel-KL\n");
	        printf("  (2) Spectral\n");
	        printf("  (3) Inertial\n");
	        printf("  (4) Linear\n");
	        printf("  (5) Random\n");
	        printf("  (6) Scattered\n");
	        printf("  (7) Read-from-file\n");
	    }
	    *global_method = input_int();
	}
    }

    if (*global_method == 7) {	/* Name and open input assignment file. */
	while (*finassign == NULL) {
	    if (PROMPT)
		printf("Assignment input file: ");
	    scanf("%s", inassignname);

	    *finassign = fopen(inassignname, "r");
	    if (*finassign == NULL) {
		printf("Assignment file `%s' not found.\n", inassignname);
	    }
	}
    }

    else if (*global_method == 3) {
	while (*fingeom == NULL) {
	    if (PROMPT)
		printf("Geometry input file name: ");
	    scanf("%s", geomname);

	    *fingeom = fopen(geomname, "r");
	    if (*fingeom == NULL) {
		printf("Geometry input file `%s' not found.\n", geomname);
	    }
	}
    }
    else if (*global_method == 2) {
        eigensolver = 0;
        while (eigensolver < 1 || eigensolver > 2) {
	    if (PROMPT) {
		printf("Eigensolver:\n");
		printf("  (1) Multilevel RQI/Symmlq\n");
		printf("  (2) Lanczos\n"); 
	    }
	    eigensolver = input_int();
        }
	if (eigensolver == 1) {
            if (MATCH_TYPE == 5) {	/* geometric matching */
                while (*fingeom == NULL) {
                    if (PROMPT)
                        printf("Geometry input file name: ");
                    scanf("%s", geomname);
 
                    *fingeom = fopen(geomname, "r");
                    if (*fingeom == NULL) {
                        printf("Geometry input file `%s' not found.\n", geomname);
                    }
                }
            }
	    *rqi_flag = 1;
	    *vmax = 0;
	    while (*vmax <= 0) {
		if (PROMPT)
		    printf("Number of vertices to coarsen down to: ");
		*vmax = input_int();
	    }
	}
    }
    else if (*global_method == 1) {
        if (MATCH_TYPE == 5) {		/* geometric matching */
            while (*fingeom == NULL) {
                if (PROMPT)
                    printf("Geometry input file name: ");
                scanf("%s", geomname);
 
                *fingeom = fopen(geomname, "r");
                if (*fingeom == NULL) {
                    printf("Geometry input file `%s' not found.\n", geomname);
                }
            }
        }
	*vmax = 0;
	while (*vmax <= 1) {
	    if (PROMPT)
		printf("Number of vertices to coarsen down to: ");
	    *vmax = input_int();
	}
    }

    if (SEQUENCE) {
	*local_method = 2;
	if (*architecture == 0) {
	    *ndims_tot = 1;
	}
	else if (*architecture > 0) {
	    mesh_dims[0] = 2;
	    mesh_dims[1] = mesh_dims[2] = 1;
	}
	*ndims = 1;
	goto End_Label;
    }

    /* Get local method, if any */
    *local_method = 0;
    if (*global_method == 1)
	*local_method = 1;
    else {
	while (*local_method < 1 || *local_method > 2) {
	    if (PROMPT) {
		printf("Local refinement method:\n");
		printf("  (1) Kernighan-Lin\n");
		printf("  (2) None\n");
	    }
	    *local_method = input_int();
	}
    }

    /* Now learn about the parallel architecture. */
    if (*architecture == 0) {
	/* Get total number of hypercube dimensions in which to partition. */
	*ndims_tot = 0;
	while (*ndims_tot < 1) {
	    if (PROMPT)
		printf("Total number of target hypercube dimensions: ");
	    *ndims_tot = input_int();
	    if (*ndims_tot < 1) {
		printf(" Number of divisions must be at least 1\n");
	    }
	}
	nprocs = 1 << (*ndims_tot);
    }

    else {			/* Get dimensions of mesh. */
	mesh_dims[1] = mesh_dims[2] = 1;
	if (*architecture == 2) {
	    if (PROMPT)
		printf("X and Y extent of of 2-D mesh: ");
	    mesh_dims[0] = input_int();
	    mesh_dims[1] = input_int();
	}
	else if (*architecture == 3) {
	    if (PROMPT)
		printf("X, Y and Z extent of 3-D mesh: ");
	    mesh_dims[0] = input_int();
	    mesh_dims[1] = input_int();
	    mesh_dims[2] = input_int();
	}
	else {			/* Anything else => 1-D mesh */
	    if (PROMPT)
		printf("Size of 1-D mesh: ");
	    mesh_dims[0] = input_int();
	    *architecture = 1;
	}
	nprocs = mesh_dims[0] * mesh_dims[1] * mesh_dims[2];
    }

    /* Get number of dimensions in which to partition at each level. */
    *ndims = 0;
    if (nprocs <= 3) {
	*ndims = 1;
    }
    else if (nprocs <= 7) {
	if (PROMPT)
	    printf("Partitioning dimension: \n");
	while (*ndims < 1 || *ndims > 2) {
	    if (PROMPT) {
		printf("  (1) Bisection\n");
		printf("  (2) Quadrisection\n");
	    }
	    *ndims = input_int();
	}
    }
    else {
	if (PROMPT)
	    printf("Partitioning dimension: \n");
	while (*ndims < 1 || *ndims > 3) {
	    if (PROMPT) {
		printf("  (1) Bisection\n");
		printf("  (2) Quadrisection\n");
		printf("  (3) Octasection\n");
	    }
	    *ndims = input_int();
	}
    }
End_Label: 

    if (*global_method == 1 || *rqi_flag) {
	if (*vmax < 2 * (1 << *ndims)) {
	    *vmax = 2 * (1 << *ndims);
	}
    }
}