# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = .

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
AS = @AS@
BONOBO_CFLAGS = @BONOBO_CFLAGS@
BONOBO_LIBS = @BONOBO_LIBS@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
DATADIRNAME = @DATADIRNAME@
DB2HTML = @DB2HTML@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
ENABLE_PROFILER = @ENABLE_PROFILER@
EXEEXT = @EXEEXT@
EXTRA_LDFLAGS = @EXTRA_LDFLAGS@
GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@
GDK_PIXBUF_CONFIG = @GDK_PIXBUF_CONFIG@
GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@
GENCAT = @GENCAT@
GLADE_DIR = @GLADE_DIR@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GNOMEGNORBA_LIBS = @GNOMEGNORBA_LIBS@
GNOMEUI_LIBS = @GNOMEUI_LIBS@
GNOME_APPLETS_LIBS = @GNOME_APPLETS_LIBS@
GNOME_CAPPLET_LIBS = @GNOME_CAPPLET_LIBS@
GNOME_CONFIG = @GNOME_CONFIG@
GNOME_DOCKLETS_LIBS = @GNOME_DOCKLETS_LIBS@
GNOME_INCLUDEDIR = @GNOME_INCLUDEDIR@
GNOME_LIBDIR = @GNOME_LIBDIR@
GNOME_LIBS = @GNOME_LIBS@
GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
GNOME_XML_CFLAGS = @GNOME_XML_CFLAGS@
GNOME_XML_LIB = @GNOME_XML_LIB@
GNORBA_CFLAGS = @GNORBA_CFLAGS@
GNORBA_LIBS = @GNORBA_LIBS@
GNUMERIC_GRAPH_IDL = @GNUMERIC_GRAPH_IDL@
GTKDOC = @GTKDOC@
GTKXMHTML_LIBS = @GTKXMHTML_LIBS@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
GUPPI_AGE = @GUPPI_AGE@
GUPPI_CURRENT = @GUPPI_CURRENT@
GUPPI_FROM_CVS = @GUPPI_FROM_CVS@
GUPPI_GNUMERIC_CFLAGS = @GUPPI_GNUMERIC_CFLAGS@
GUPPI_GNUMERIC_COMPONENT_TYPE = @GUPPI_GNUMERIC_COMPONENT_TYPE@
GUPPI_GNUMERIC_GRAPH_VERSION = @GUPPI_GNUMERIC_GRAPH_VERSION@
GUPPI_GNUMERIC_LIBS = @GUPPI_GNUMERIC_LIBS@
GUPPI_GNUMERIC_LOCATION = @GUPPI_GNUMERIC_LOCATION@
GUPPI_MAJOR_VERSION = @GUPPI_MAJOR_VERSION@
GUPPI_MICRO_VERSION = @GUPPI_MICRO_VERSION@
GUPPI_MINOR_VERSION = @GUPPI_MINOR_VERSION@
GUPPI_REVISION = @GUPPI_REVISION@
GUPPI_VERSION = @GUPPI_VERSION@
HAVE_GTK_DOC = @HAVE_GTK_DOC@
HTML_DIR = @HTML_DIR@
IDL_FLAGS = @IDL_FLAGS@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTLTOOL_PERL = @INTLTOOL_PERL@
LEX = @LEX@
LIBART_CFLAGS = @LIBART_CFLAGS@
LIBART_CONFIG = @LIBART_CONFIG@
LIBART_LIBS = @LIBART_LIBS@
LIBGLADE_CFLAGS = @LIBGLADE_CFLAGS@
LIBGLADE_CONFIG = @LIBGLADE_CONFIG@
LIBGLADE_LIBS = @LIBGLADE_LIBS@
LIBGUPPI_INCLUDEDIR = @LIBGUPPI_INCLUDEDIR@
LIBGUPPI_LIBDIR = @LIBGUPPI_LIBDIR@
LIBGUPPI_LIBS = @LIBGUPPI_LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
OAF_CFLAGS = @OAF_CFLAGS@
OAF_CONFIG = @OAF_CONFIG@
OAF_LIBS = @OAF_LIBS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
ORBIT_CFLAGS = @ORBIT_CFLAGS@
ORBIT_CONFIG = @ORBIT_CONFIG@
ORBIT_IDL = @ORBIT_IDL@
ORBIT_LIBS = @ORBIT_LIBS@
PACKAGE = @PACKAGE@
PIXMAPS_DIR = @PIXMAPS_DIR@
PLUG_IN_DIR = @PLUG_IN_DIR@
POFILES = @POFILES@
POSUB = @POSUB@
PTHREAD_LIB = @PTHREAD_LIB@
RANLIB = @RANLIB@
SCRIPTS_DIR = @SCRIPTS_DIR@
STANDARD_CFLAGS = @STANDARD_CFLAGS@
STANDARD_LDFLAGS = @STANDARD_LDFLAGS@
STRIP = @STRIP@
SUPPORT_GNUMERIC = @SUPPORT_GNUMERIC@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
USING_BONOBO = @USING_BONOBO@
VERSION = @VERSION@
XML_I18N_EXTRACT = @XML_I18N_EXTRACT@
XML_I18N_MERGE = @XML_I18N_MERGE@
XML_I18N_MERGE_DESKTOP_RULE = @XML_I18N_MERGE_DESKTOP_RULE@
XML_I18N_MERGE_DIRECTORY_RULE = @XML_I18N_MERGE_DIRECTORY_RULE@
XML_I18N_MERGE_KEYS_RULE = @XML_I18N_MERGE_KEYS_RULE@
XML_I18N_MERGE_OAF_RULE = @XML_I18N_MERGE_OAF_RULE@
XML_I18N_MERGE_PONG_RULE = @XML_I18N_MERGE_PONG_RULE@
XML_I18N_MERGE_SERVER_RULE = @XML_I18N_MERGE_SERVER_RULE@
XML_I18N_MERGE_SHEET_RULE = @XML_I18N_MERGE_SHEET_RULE@
XML_I18N_MERGE_SOUNDLIST_RULE = @XML_I18N_MERGE_SOUNDLIST_RULE@
XML_I18N_MERGE_XML_RULE = @XML_I18N_MERGE_XML_RULE@
XML_I18N_UPDATE = @XML_I18N_UPDATE@
XPM_LIBS = @XPM_LIBS@
YACC = @YACC@
ZVT_LIBS = @ZVT_LIBS@
cflags_set = @cflags_set@
cxxflags_set = @cxxflags_set@
gnomelocaledir = @gnomelocaledir@
l = @l@
@SUPPORT_GNUMERIC_TRUE@GNUMERIC_COMPONENT = guppi-gnumeric
@SUPPORT_GNUMERIC_FALSE@GNUMERIC_COMPONENT = 

SUBDIRS =  	macros 			pixmaps 		sample-data 		intl 			po 			src 			plug-ins 		libguppitank		$(GNUMERIC_COMPONENT) 	tests			doc


#appdir = $(datadir)/gnome/apps/Applications
#app_DATA = guppi.desktop

confexecdir = $(libdir)
confexec_DATA = libguppiConf.sh
CLEANFILES =  	libguppiConf.sh 	xml-i18n-extract xml-i18n-merge xml-i18n-update


aclocaldir = $(datadir)/aclocal
aclocal_DATA = libguppi.m4

EXTRA_DIST =  	ChangeLog README AUTHORS NEWS BIBLIOGRAPHY 	libguppiConf.sh.in libguppi.m4 	xml-i18n-extract.in xml-i18n-merge.in xml-i18n-update.in 	Guppi.spec.in Guppi.spec

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =  Guppi.spec
DATA =  $(aclocal_DATA) $(confexec_DATA)

DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
Guppi.spec.in INSTALL Makefile.am Makefile.in NEWS TODO acconfig.h \
aclocal.m4 config.guess config.h.in config.sub configure configure.in \
install-sh ltmain.sh missing mkinstalldirs


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
DIST_SUBDIRS =  macros pixmaps sample-data intl po src plug-ins \
libguppitank guppi-gnumeric tests doc
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
	cd $(srcdir) && $(ACLOCAL)

config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:
Guppi.spec: $(top_builddir)/config.status Guppi.spec.in
	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

install-aclocalDATA: $(aclocal_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(aclocaldir)
	@list='$(aclocal_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(aclocaldir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(aclocaldir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(aclocaldir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(aclocaldir)/$$p; \
	  fi; fi; \
	done

uninstall-aclocalDATA:
	@$(NORMAL_UNINSTALL)
	list='$(aclocal_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(aclocaldir)/$$p; \
	done

install-confexecDATA: $(confexec_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(confexecdir)
	@list='$(confexec_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(confexecdir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(confexecdir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(confexecdir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(confexecdir)/$$p; \
	  fi; fi; \
	done

uninstall-confexecDATA:
	@$(NORMAL_UNINSTALL)
	list='$(confexec_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(confexecdir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-confexecDATA
install-exec: install-exec-recursive

install-data-am: install-aclocalDATA
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-aclocalDATA uninstall-confexecDATA
uninstall: uninstall-recursive
all-am: Makefile $(DATA) config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(aclocaldir) $(DESTDIR)$(confexecdir)


mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
uninstall-aclocalDATA install-aclocalDATA uninstall-confexecDATA \
install-confexecDATA install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


libguppiConf.sh: libguppiConf.sh.in Makefile
	sed -e 's?\@LIBGUPPI_LIBDIR\@?$(LIBGUPPI_LIBDIR)?g' \
	-e 's?\@LIBGUPPI_INCLUDEDIR\@?$(LIBGUPPI_INCLUDEDIR)?g' \
	-e 's?\@VERSION\@?$(VERSION)?g' \
	-e 's?\@LIBGUPPI_LIBS\@?$(LIBGUPPI_LIBS)?g' \
	< $(srcdir)/libguppiConf.sh.in > libguppiConf.tmp \
	&& mv libguppiConf.tmp libguppiConf.sh

# Guppi.spec and Guppi.spec.in are broken...

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: