# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# versioned installation directories
# Installation/uninstallation and distribution for .html files.
# htmlname -- html base name (e.g. maxima or xmaxima)
# htmlinstdir -- html installation directory
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(maxima_TEXINFOS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/common-html.mk \
$(top_srcdir)/common.mk texinfo.tex
subdir = doc/info
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/maxima.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = maxima.dvi
PDFS = maxima.pdf
PSS = maxima.ps
HTMLS = maxima.html
TEXINFOS = maxima.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
am__installdirs = "$(DESTDIR)$(infodir)"
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = es es.utf8 pt pt.utf8 pt_BR pt_BR.utf8
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ACL_FALSE = @ACL_FALSE@
ACL_NAME = @ACL_NAME@
ACL_TRUE = @ACL_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CLISP_FALSE = @CLISP_FALSE@
CLISP_NAME = @CLISP_NAME@
CLISP_RUNTIME = @CLISP_RUNTIME@
CLISP_RUNTIME_PATH = @CLISP_RUNTIME_PATH@
CLISP_TRUE = @CLISP_TRUE@
CMUCL_FALSE = @CMUCL_FALSE@
CMUCL_NAME = @CMUCL_NAME@
CMUCL_RUNTIME = @CMUCL_RUNTIME@
CMUCL_RUNTIME_PATH = @CMUCL_RUNTIME_PATH@
CMUCL_TRUE = @CMUCL_TRUE@
CYGPATH_W = @CYGPATH_W@
DEFAULTLISP = @DEFAULTLISP@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
GCL_ALT_LINK_FALSE = @GCL_ALT_LINK_FALSE@
GCL_ALT_LINK_TRUE = @GCL_ALT_LINK_TRUE@
GCL_FALSE = @GCL_FALSE@
GCL_NAME = @GCL_NAME@
GCL_TRUE = @GCL_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LANG_ES_FALSE = @LANG_ES_FALSE@
LANG_ES_TRUE = @LANG_ES_TRUE@
LANG_ES_UTF8_FALSE = @LANG_ES_UTF8_FALSE@
LANG_ES_UTF8_TRUE = @LANG_ES_UTF8_TRUE@
LANG_PT_BR_FALSE = @LANG_PT_BR_FALSE@
LANG_PT_BR_TRUE = @LANG_PT_BR_TRUE@
LANG_PT_BR_UTF8_FALSE = @LANG_PT_BR_UTF8_FALSE@
LANG_PT_BR_UTF8_TRUE = @LANG_PT_BR_UTF8_TRUE@
LANG_PT_FALSE = @LANG_PT_FALSE@
LANG_PT_TRUE = @LANG_PT_TRUE@
LANG_PT_UTF8_FALSE = @LANG_PT_UTF8_FALSE@
LANG_PT_UTF8_TRUE = @LANG_PT_UTF8_TRUE@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OPENMCL_FALSE = @OPENMCL_FALSE@
OPENMCL_NAME = @OPENMCL_NAME@
OPENMCL_TRUE = @OPENMCL_TRUE@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSIX_SHELL = @POSIX_SHELL@
SBCL_FALSE = @SBCL_FALSE@
SBCL_NAME = @SBCL_NAME@
SBCL_TRUE = @SBCL_TRUE@
SCL_FALSE = @SCL_FALSE@
SCL_NAME = @SCL_NAME@
SCL_RUNTIME = @SCL_RUNTIME@
SCL_RUNTIME_PATH = @SCL_RUNTIME_PATH@
SCL_TRUE = @SCL_TRUE@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_RECODE_FALSE = @USE_RECODE_FALSE@
USE_RECODE_TRUE = @USE_RECODE_TRUE@
VERSION = @VERSION@
WIN32_FALSE = @WIN32_FALSE@
WIN32_TRUE = @WIN32_TRUE@
WISH = @WISH@
ac_ct_STRIP = @ac_ct_STRIP@
acl_found = @acl_found@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
clisp_found = @clisp_found@
cmucl_found = @cmucl_found@
datadir = @datadir@
default_layout_autotools = @default_layout_autotools@
exec_prefix = @exec_prefix@
expanded_datadir = @expanded_datadir@
expanded_exec_prefix = @expanded_exec_prefix@
expanded_infodir = @expanded_infodir@
expanded_libdir = @expanded_libdir@
expanded_libexecdir = @expanded_libexecdir@
expanded_top_srcdir = @expanded_top_srcdir@
gcl_found = @gcl_found@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
iconv_found = @iconv_found@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
openmcl_found = @openmcl_found@
prefix = @prefix@
program_transform_name = @program_transform_name@
recode_found = @recode_found@
sbcl_found = @sbcl_found@
sbindir = @sbindir@
scl_found = @scl_found@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
win32 = @win32@
@LANG_ES_TRUE@ES_DIR = es
@LANG_ES_UTF8_TRUE@ES_DIR_UTF8 = es.utf8
@LANG_PT_TRUE@PT_DIR = pt
@LANG_PT_UTF8_TRUE@PT_DIR_UTF8 = pt.utf8
@LANG_PT_BR_TRUE@PT_BR_DIR = pt_BR
@LANG_PT_BR_UTF8_TRUE@PT_BR_DIR_UTF8 = pt_BR.utf8
SUBDIRS = $(ES_DIR) $(ES_DIR_UTF8) $(PT_DIR) $(PT_DIR_UTF8) $(PT_BR_DIR) $(PT_BR_DIR_UTF8)
info_TEXINFOS = maxima.texi
maxima_TEXINFOS = Introduction.texi Help.texi Command.texi Operators.texi \
Expressions.texi Simplification.texi Plotting.texi Input.texi \
Floating.texi Contexts.texi Polynomials.texi Constants.texi \
Logarithms.texi Trigonometric.texi Special.texi \
Limits.texi Differentiation.texi Integration.texi Equations.texi \
Differential.texi Numerical.texi \
Arrays.texi Matrices.texi Affine.texi Itensor.texi \
Ctensor.texi Atensor.texi Series.texi Number.texi Symmetries.texi \
Groups.texi Runtime.texi Miscellaneous.texi Rules.texi Lists.texi \
Function.texi Program.texi Debugging.texi Indices.texi Elliptic.texi \
Bugs.texi nset.texi zeilberger.texi orthopoly.texi linearalgebra.texi \
solve_rec.texi stringproc.texi numericalio.texi descriptive.texi \
distrib.texi draw.texi simplex.texi simplifications.texi unit.texi makeOrders.texi \
mnewton.texi lsquares.texi plotdf.texi lindstedt.texi impdiff.texi \
ggf.texi f90.texi eval_string.texi diag.texi dynamics.texi\
bode.texi augmented_lagrangian.texi opsubst.texi stats.texi stirling.texi\
implicit_plot.texi interpol.texi lbfgs.texi romberg.texi grobner.texi\
contrib_ode.texi
figurefiles = \
figures/dynamics1.gif\
figures/dynamics2.gif\
figures/dynamics3.gif\
figures/dynamics4.gif\
figures/dynamics5.gif\
figures/dynamics6.gif\
figures/dynamics7.gif\
figures/dynamics8.gif\
figures/dynamics9.gif\
figures/dynamics10.gif\
figures/implicit_plot.gif\
figures/plotdf1.gif\
figures/plotdf2.gif\
figures/plotdf3.gif\
figures/plotdf4.gif\
figures/plotdf5.gif\
figures/plotdf6.gif\
figures/plotting1.gif\
figures/plotting2.gif\
figures/plotting3.gif\
figures/plotting4.gif\
figures/plotting5.gif\
figures/plotting6.gif\
figures/plotting7.gif\
figures/plotting8.gif\
figures/plotting9.gif\
figures/plotting10.gif\
figures/plotting11.gif\
figures/plotting12.gif\
figures/plotting13.gif\
figures/plotting14.gif\
figures/plotting15.gif\
figures/plotting16.gif\
figures/plotting17.gif\
figures/plotting18.gif\
figures/plotting19.gif\
figures/plotting20.gif\
figures/plotting21.gif\
figures/plotting22.gif\
figures/plotting23.gif\
figures/plotting24.gif\
figures/plotting25.gif\
figures/orthopoly1.gif
pdffigures = \
figures/dynamics1.pdf\
figures/dynamics2.pdf\
figures/dynamics3.pdf\
figures/dynamics4.pdf\
figures/dynamics5.pdf\
figures/dynamics6.pdf\
figures/dynamics7.pdf\
figures/dynamics8.pdf\
figures/dynamics9.pdf\
figures/dynamics10.pdf\
figures/implicit_plot.pdf\
figures/plotdf1.pdf\
figures/plotdf2.pdf\
figures/plotdf3.pdf\
figures/plotdf4.pdf\
figures/plotdf5.pdf\
figures/plotdf6.pdf\
figures/plotting1.pdf\
figures/plotting2.pdf\
figures/plotting3.pdf\
figures/plotting4.pdf\
figures/plotting5.pdf\
figures/plotting6.pdf\
figures/plotting7.pdf\
figures/plotting8.pdf\
figures/plotting9.pdf\
figures/plotting10.pdf\
figures/plotting11.pdf\
figures/plotting12.pdf\
figures/plotting13.pdf\
figures/plotting14.pdf\
figures/plotting15.pdf\
figures/plotting16.pdf\
figures/plotting17.pdf\
figures/plotting18.pdf\
figures/plotting19.pdf\
figures/plotting20.pdf\
figures/plotting21.pdf\
figures/plotting22.pdf\
figures/plotting23.pdf\
figures/plotting24.pdf\
figures/plotting25.pdf\
figures/orthopoly1.pdf
verpkglibdir = $(pkglibdir)/@VERSION@
verpkglibexecdir = $(libexecdir)/@PACKAGE@/@VERSION@
verpkgdatadir = $(pkgdatadir)/@VERSION@
docdir = $(verpkgdatadir)/doc
dochtmldir = $(docdir)/html
docsharedir = $(docdir)/share
demodir = $(verpkgdatadir)/demo
emacsdir = $(verpkgdatadir)/emacs
sharedir = $(verpkgdatadir)/share
instsrcdir = $(verpkgdatadir)/src
xmaximadir = $(verpkgdatadir)/xmaxima
insttestsdir = $(verpkgdatadir)/tests
genericdir = $(dochtmldir)
genericdirDATA = $(figurefiles) \
contents.hhc index.hhk header.hhp maxima.hhp
htmlname = maxima
htmlinstdir = $(dochtmldir)
EXTRA_DIST = texi2html manual.css texi2html.init \
$(genericdirDATA) $(pdffigures) \
create_index maxima-index.lisp \
check_crlf check_tab fix_crlf fix_tab build_index.pl
all: all-recursive
.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/common.mk $(top_srcdir)/common-html.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/info/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/info/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
.texi.info:
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
cd $(srcdir); \
else \
rc=$$?; \
cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $<
.texi.pdf:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $<
.texi.html:
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
else \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
$(srcdir)/maxima.info: maxima.texi $(maxima_TEXINFOS)
maxima.dvi: maxima.texi $(maxima_TEXINFOS)
maxima.pdf: maxima.texi $(maxima_TEXINFOS)
.dvi.ps:
$(DVIPS) -o $@ $<
uninstall-info-am:
$(PRE_UNINSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if cd "$(DESTDIR)$(infodir)"; then \
echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
for file in $$d/$$base*; do \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f $(distdir)/$$relfile || \
cp -p $$file $(distdir)/$$relfile; \
done; \
done
mostlyclean-aminfo:
-rm -rf maxima.aux maxima.cp maxima.cps maxima.fn maxima.fns maxima.ky \
maxima.kys maxima.log maxima.pg maxima.pgs maxima.tmp \
maxima.toc maxima.tp maxima.tps maxima.vr maxima.dvi \
maxima.pdf maxima.ps maxima.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/../.. $(distdir)/figures
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info dist-hook
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(infodir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am: $(DVIS)
html: html-recursive
html-am: $(HTMLS)
info: info-recursive
info-am: $(INFO_DEPS)
install-data-am: install-data-local install-info-am
install-exec-am:
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
$(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic
pdf: pdf-recursive
pdf-am: $(PDFS)
ps: ps-recursive
ps-am: $(PSS)
uninstall-am: uninstall-info-am uninstall-local
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \
check-am clean clean-generic clean-local clean-recursive ctags \
ctags-recursive dist-hook dist-info distclean \
distclean-generic distclean-recursive distclean-tags distdir \
dvi dvi-am html html-am info info-am install install-am \
install-data install-data-am install-data-local install-exec \
install-exec-am install-info install-info-am install-man \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-recursive \
mostlyclean mostlyclean-aminfo mostlyclean-generic \
mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-info-am uninstall-local
all-local: maxima-index.lisp maxima.html contents.hhc
maxima-index.lisp: maxima.info build_index.pl
perl ./build_index.pl maxima.info ':crlf' > maxima-index.lisp
maxima.html: maxima.texi $(maxima_TEXINFOS)
perl ./texi2html -split_chapter --lang=en --output=. --css-include=./manual.css --init-file ./texi2html.init maxima.texi
contents.hhc: maxima.html
perl ./create_index
# Support for installation of DATA files in a generic directory
# with subdirectories.
# To use, set genericdir to point to the installation directory.
# Set genericdirDATA to hold the list of files to install.
# genericdirDATA may contain subdirectories. Subdirectories will
# be created if necessary.
install-data-local: install-datafiles
install-datafiles: $(genericdirDATA)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(genericdir)
@list='$(genericdirDATA)'; for p in $$list; do \
if test -f $(srcdir)/$$p; then \
if test ! -d `dirname $(DESTDIR)$(genericdir)/$$p`; then \
$(mkinstalldirs) `dirname $(DESTDIR)$(genericdir)/$$p`; \
fi; \
echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(genericdir)/$$p"; \
$(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(genericdir)/$$p; \
else if test -f $$p; then \
if test ! -d `dirname $(DESTDIR)$(genericdir)/$$p`; then \
$(mkinstalldirs) `dirname $(DESTDIR)$(genericdir)/$$p`; \
fi; \
echo " $(INSTALL_DATA) $$p $(DESTDIR)$(genericdir)/$$p"; \
$(INSTALL_DATA) $$p $(DESTDIR)$(genericdir)/$$p; \
fi; fi; \
done
uninstall-local: uninstall-datafiles
uninstall-datafiles:
@$(NORMAL_UNINSTALL)
list='$(genericdirDATA)'; for p in $$list; do \
rm -f $(DESTDIR)$(genericdir)/$$p; \
done
install-data-local: install-maxima-html
install-maxima-html: $(htmlname).html
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(htmlinstdir)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list="$(srcdir)/$(htmlname).html $(srcdir)/$(htmlname)_*.html" ; \
for p in $$list; do \
f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`; \
if test -f $(srcdir)/$$f; then \
if test ! -d `dirname $(DESTDIR)$(htmlinstdir)/$$f`; then \
$(mkinstalldirs) `dirname $(DESTDIR)$(htmlinstdir)/$$f`; \
fi; \
echo " $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(htmlinstdir)/$$f"; \
$(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(htmlinstdir)/$$f; \
else if test -f $$f; then \
if test ! -d `dirname $(DESTDIR)$(htmlinstdir)/$$f`; then \
$(mkinstalldirs) `dirname $(DESTDIR)$(htmlinstdir)/$$f`; \
fi; \
echo " $(INSTALL_DATA) $$f $(DESTDIR)$(htmlinstdir)/$$f"; \
$(INSTALL_DATA) $$f $(DESTDIR)$(htmlinstdir)/$$f; \
fi; fi; \
done
uninstall-local: uninstall-maxima-html
uninstall-maxima-html:
@$(NORMAL_UNINSTALL)
rm -f $(DESTDIR)$(htmlinstdir)/$(htmlname).html
rm -f $(DESTDIR)$(htmlinstdir)/$(htmlname)_*.html
dist-hook: dist-maxima-html
dist-maxima-html: $(htmlname).html
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list="$(srcdir)/$(htmlname).html $(srcdir)/$(htmlname)_*.html" ; \
for p in $$list; do \
f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`; \
test -f $(distdir)/$$f || cp -p $(srcdir)/$$f $(distdir)/$$f; \
done
all-local: warn_texinfo
dist-hook: check_texinfo
install-data-local: install-maxima-index
uninstall-local: uninstall-maxima-index
install-maxima-index: maxima-index.lisp
test -z "$(infodir)" || mkdir -p -- "$(DESTDIR)$(infodir)"
$(INSTALL_DATA) maxima-index.lisp "$(DESTDIR)$(infodir)/maxima-index.lisp"
uninstall-maxima-index: maxima-index.lisp
rm -f "$(DESTDIR)$(infodir)/maxima-index.lisp"
clean-local: clean-info
clean-local: clean-html
clean-info:
rm -f maxima.info*
rm -f maxima-index.lisp
clean-html:
rm -f maxima*.html
rm -f contents.hhc
rm -f index.hhk
check_texinfo:
echo check_texinfo
# pattern=`printf "\r$$"` ; \
# bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \
# [ -z "$$bad_files" ] || ( echo "ERROR: The following files have DOS-style EOLs: $$bad_files" ; \
# echo "Run make distclean and then /doc/info/fix_crlf to fix the problem." ; exit 1 )
# pattern=`printf "\t"` ; \
# bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \
# [ -z "$$bad_files" ] || ( echo "ERROR: The following files have unexpanded Tabs: $$bad_files" ; \
# echo "Run make distclean and then /doc/info/fix_tab to fix the problem." ; exit 1 )
warn_texinfo:
echo warn_texinfo
# pattern=`printf "\r$$"` ; \
# bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \
# [ -z "$$bad_files" ] || ( echo "WARNING: The following files have DOS-style EOLs: $$bad_files" ; \
# echo "Run /doc/info/fix_crlf to fix the problem." )
# pattern=`printf "\t"` ; \
# bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \
# [ -z "$$bad_files" ] || ( echo "WARNING: The following files have unexpanded Tabs: $$bad_files" ; \
# echo "Run /doc/info/fix_tab to fix the problem." )
.PHONY: check_texinfo warn_texinfo
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1