# Makefile.in generated by automake 1.9.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # versioned installation directories # Installation/uninstallation and distribution for .html files. # htmlname -- html base name (e.g. maxima or xmaxima) # htmlinstdir -- html installation directory srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(maxima_TEXINFOS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/common-html.mk \ $(top_srcdir)/common.mk texinfo.tex subdir = doc/info ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = INFO_DEPS = $(srcdir)/maxima.info am__TEXINFO_TEX_DIR = $(srcdir) DVIS = maxima.dvi PDFS = maxima.pdf PSS = maxima.ps HTMLS = maxima.html TEXINFOS = maxima.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__installdirs = "$(DESTDIR)$(infodir)" ETAGS = etags CTAGS = ctags DIST_SUBDIRS = es es.utf8 pt pt.utf8 pt_BR pt_BR.utf8 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ACL_FALSE = @ACL_FALSE@ ACL_NAME = @ACL_NAME@ ACL_TRUE = @ACL_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CLISP_FALSE = @CLISP_FALSE@ CLISP_NAME = @CLISP_NAME@ CLISP_RUNTIME = @CLISP_RUNTIME@ CLISP_RUNTIME_PATH = @CLISP_RUNTIME_PATH@ CLISP_TRUE = @CLISP_TRUE@ CMUCL_FALSE = @CMUCL_FALSE@ CMUCL_NAME = @CMUCL_NAME@ CMUCL_RUNTIME = @CMUCL_RUNTIME@ CMUCL_RUNTIME_PATH = @CMUCL_RUNTIME_PATH@ CMUCL_TRUE = @CMUCL_TRUE@ CYGPATH_W = @CYGPATH_W@ DEFAULTLISP = @DEFAULTLISP@ DEFS = @DEFS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ GCL_ALT_LINK_FALSE = @GCL_ALT_LINK_FALSE@ GCL_ALT_LINK_TRUE = @GCL_ALT_LINK_TRUE@ GCL_FALSE = @GCL_FALSE@ GCL_NAME = @GCL_NAME@ GCL_TRUE = @GCL_TRUE@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LANG_ES_FALSE = @LANG_ES_FALSE@ LANG_ES_TRUE = @LANG_ES_TRUE@ LANG_ES_UTF8_FALSE = @LANG_ES_UTF8_FALSE@ LANG_ES_UTF8_TRUE = @LANG_ES_UTF8_TRUE@ LANG_PT_BR_FALSE = @LANG_PT_BR_FALSE@ LANG_PT_BR_TRUE = @LANG_PT_BR_TRUE@ LANG_PT_BR_UTF8_FALSE = @LANG_PT_BR_UTF8_FALSE@ LANG_PT_BR_UTF8_TRUE = @LANG_PT_BR_UTF8_TRUE@ LANG_PT_FALSE = @LANG_PT_FALSE@ LANG_PT_TRUE = @LANG_PT_TRUE@ LANG_PT_UTF8_FALSE = @LANG_PT_UTF8_FALSE@ LANG_PT_UTF8_TRUE = @LANG_PT_UTF8_TRUE@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OPENMCL_FALSE = @OPENMCL_FALSE@ OPENMCL_NAME = @OPENMCL_NAME@ OPENMCL_TRUE = @OPENMCL_TRUE@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSIX_SHELL = @POSIX_SHELL@ SBCL_FALSE = @SBCL_FALSE@ SBCL_NAME = @SBCL_NAME@ SBCL_TRUE = @SBCL_TRUE@ SCL_FALSE = @SCL_FALSE@ SCL_NAME = @SCL_NAME@ SCL_RUNTIME = @SCL_RUNTIME@ SCL_RUNTIME_PATH = @SCL_RUNTIME_PATH@ SCL_TRUE = @SCL_TRUE@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_RECODE_FALSE = @USE_RECODE_FALSE@ USE_RECODE_TRUE = @USE_RECODE_TRUE@ VERSION = @VERSION@ WIN32_FALSE = @WIN32_FALSE@ WIN32_TRUE = @WIN32_TRUE@ WISH = @WISH@ ac_ct_STRIP = @ac_ct_STRIP@ acl_found = @acl_found@ am__leading_dot = @am__leading_dot@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ clisp_found = @clisp_found@ cmucl_found = @cmucl_found@ datadir = @datadir@ default_layout_autotools = @default_layout_autotools@ exec_prefix = @exec_prefix@ expanded_datadir = @expanded_datadir@ expanded_exec_prefix = @expanded_exec_prefix@ expanded_infodir = @expanded_infodir@ expanded_libdir = @expanded_libdir@ expanded_libexecdir = @expanded_libexecdir@ expanded_top_srcdir = @expanded_top_srcdir@ gcl_found = @gcl_found@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ iconv_found = @iconv_found@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ openmcl_found = @openmcl_found@ prefix = @prefix@ program_transform_name = @program_transform_name@ recode_found = @recode_found@ sbcl_found = @sbcl_found@ sbindir = @sbindir@ scl_found = @scl_found@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ win32 = @win32@ @LANG_ES_TRUE@ES_DIR = es @LANG_ES_UTF8_TRUE@ES_DIR_UTF8 = es.utf8 @LANG_PT_TRUE@PT_DIR = pt @LANG_PT_UTF8_TRUE@PT_DIR_UTF8 = pt.utf8 @LANG_PT_BR_TRUE@PT_BR_DIR = pt_BR @LANG_PT_BR_UTF8_TRUE@PT_BR_DIR_UTF8 = pt_BR.utf8 SUBDIRS = $(ES_DIR) $(ES_DIR_UTF8) $(PT_DIR) $(PT_DIR_UTF8) $(PT_BR_DIR) $(PT_BR_DIR_UTF8) info_TEXINFOS = maxima.texi maxima_TEXINFOS = Introduction.texi Help.texi Command.texi Operators.texi \ Expressions.texi Simplification.texi Plotting.texi Input.texi \ Floating.texi Contexts.texi Polynomials.texi Constants.texi \ Logarithms.texi Trigonometric.texi Special.texi \ Limits.texi Differentiation.texi Integration.texi Equations.texi \ Differential.texi Numerical.texi \ Arrays.texi Matrices.texi Affine.texi Itensor.texi \ Ctensor.texi Atensor.texi Series.texi Number.texi Symmetries.texi \ Groups.texi Runtime.texi Miscellaneous.texi Rules.texi Lists.texi \ Function.texi Program.texi Debugging.texi Indices.texi Elliptic.texi \ Bugs.texi nset.texi zeilberger.texi orthopoly.texi linearalgebra.texi \ solve_rec.texi stringproc.texi numericalio.texi descriptive.texi \ distrib.texi draw.texi simplex.texi simplifications.texi unit.texi makeOrders.texi \ mnewton.texi lsquares.texi plotdf.texi lindstedt.texi impdiff.texi \ ggf.texi f90.texi eval_string.texi diag.texi dynamics.texi\ bode.texi augmented_lagrangian.texi opsubst.texi stats.texi stirling.texi\ implicit_plot.texi interpol.texi lbfgs.texi romberg.texi grobner.texi\ contrib_ode.texi figurefiles = \ figures/dynamics1.gif\ figures/dynamics2.gif\ figures/dynamics3.gif\ figures/dynamics4.gif\ figures/dynamics5.gif\ figures/dynamics6.gif\ figures/dynamics7.gif\ figures/dynamics8.gif\ figures/dynamics9.gif\ figures/dynamics10.gif\ figures/implicit_plot.gif\ figures/plotdf1.gif\ figures/plotdf2.gif\ figures/plotdf3.gif\ figures/plotdf4.gif\ figures/plotdf5.gif\ figures/plotdf6.gif\ figures/plotting1.gif\ figures/plotting2.gif\ figures/plotting3.gif\ figures/plotting4.gif\ figures/plotting5.gif\ figures/plotting6.gif\ figures/plotting7.gif\ figures/plotting8.gif\ figures/plotting9.gif\ figures/plotting10.gif\ figures/plotting11.gif\ figures/plotting12.gif\ figures/plotting13.gif\ figures/plotting14.gif\ figures/plotting15.gif\ figures/plotting16.gif\ figures/plotting17.gif\ figures/plotting18.gif\ figures/plotting19.gif\ figures/plotting20.gif\ figures/plotting21.gif\ figures/plotting22.gif\ figures/plotting23.gif\ figures/plotting24.gif\ figures/plotting25.gif\ figures/orthopoly1.gif pdffigures = \ figures/dynamics1.pdf\ figures/dynamics2.pdf\ figures/dynamics3.pdf\ figures/dynamics4.pdf\ figures/dynamics5.pdf\ figures/dynamics6.pdf\ figures/dynamics7.pdf\ figures/dynamics8.pdf\ figures/dynamics9.pdf\ figures/dynamics10.pdf\ figures/implicit_plot.pdf\ figures/plotdf1.pdf\ figures/plotdf2.pdf\ figures/plotdf3.pdf\ figures/plotdf4.pdf\ figures/plotdf5.pdf\ figures/plotdf6.pdf\ figures/plotting1.pdf\ figures/plotting2.pdf\ figures/plotting3.pdf\ figures/plotting4.pdf\ figures/plotting5.pdf\ figures/plotting6.pdf\ figures/plotting7.pdf\ figures/plotting8.pdf\ figures/plotting9.pdf\ figures/plotting10.pdf\ figures/plotting11.pdf\ figures/plotting12.pdf\ figures/plotting13.pdf\ figures/plotting14.pdf\ figures/plotting15.pdf\ figures/plotting16.pdf\ figures/plotting17.pdf\ figures/plotting18.pdf\ figures/plotting19.pdf\ figures/plotting20.pdf\ figures/plotting21.pdf\ figures/plotting22.pdf\ figures/plotting23.pdf\ figures/plotting24.pdf\ figures/plotting25.pdf\ figures/orthopoly1.pdf verpkglibdir = $(pkglibdir)/@VERSION@ verpkglibexecdir = $(libexecdir)/@PACKAGE@/@VERSION@ verpkgdatadir = $(pkgdatadir)/@VERSION@ docdir = $(verpkgdatadir)/doc dochtmldir = $(docdir)/html docsharedir = $(docdir)/share demodir = $(verpkgdatadir)/demo emacsdir = $(verpkgdatadir)/emacs sharedir = $(verpkgdatadir)/share instsrcdir = $(verpkgdatadir)/src xmaximadir = $(verpkgdatadir)/xmaxima insttestsdir = $(verpkgdatadir)/tests genericdir = $(dochtmldir) genericdirDATA = $(figurefiles) \ contents.hhc index.hhk header.hhp maxima.hhp htmlname = maxima htmlinstdir = $(dochtmldir) EXTRA_DIST = texi2html manual.css texi2html.init \ $(genericdirDATA) $(pdffigures) \ create_index maxima-index.lisp \ check_crlf check_tab fix_crlf fix_tab build_index.pl all: all-recursive .SUFFIXES: .SUFFIXES: .dvi .html .info .pdf .ps .texi $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/common.mk $(top_srcdir)/common-html.mk $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/info/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/info/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh .texi.info: restore=: && backupdir="$(am__leading_dot)am$$$$" && \ am__cwd=`pwd` && cd $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ $<; \ then \ rc=0; \ cd $(srcdir); \ else \ rc=$$?; \ cd $(srcdir) && \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc .texi.dvi: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) $< .texi.pdf: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) $< .texi.html: rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) $<; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi $(srcdir)/maxima.info: maxima.texi $(maxima_TEXINFOS) maxima.dvi: maxima.texi $(maxima_TEXINFOS) maxima.pdf: maxima.texi $(maxima_TEXINFOS) .dvi.ps: $(DVIPS) -o $@ $< uninstall-info-am: $(PRE_UNINSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if cd "$(DESTDIR)$(infodir)"; then \ echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ for file in $$d/$$base*; do \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f $(distdir)/$$relfile || \ cp -p $$file $(distdir)/$$relfile; \ done; \ done mostlyclean-aminfo: -rm -rf maxima.aux maxima.cp maxima.cps maxima.fn maxima.fns maxima.ky \ maxima.kys maxima.log maxima.pg maxima.pgs maxima.tmp \ maxima.toc maxima.tp maxima.tps maxima.vr maxima.dvi \ maxima.pdf maxima.ps maxima.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/../.. $(distdir)/figures @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info dist-hook check-am: all-am check: check-recursive all-am: Makefile $(INFO_DEPS) all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(infodir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: $(DVIS) html: html-recursive html-am: $(HTMLS) info: info-recursive info-am: $(INFO_DEPS) install-data-am: install-data-local install-info-am install-exec-am: install-info: install-info-recursive install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-aminfo mostlyclean-generic pdf: pdf-recursive pdf-am: $(PDFS) ps: ps-recursive ps-am: $(PSS) uninstall-am: uninstall-info-am uninstall-local uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \ check-am clean clean-generic clean-local clean-recursive ctags \ ctags-recursive dist-hook dist-info distclean \ distclean-generic distclean-recursive distclean-tags distdir \ dvi dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-local install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-aminfo \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-aminfo mostlyclean-generic \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-info-am uninstall-local all-local: maxima-index.lisp maxima.html contents.hhc maxima-index.lisp: maxima.info build_index.pl perl ./build_index.pl maxima.info ':crlf' > maxima-index.lisp maxima.html: maxima.texi $(maxima_TEXINFOS) perl ./texi2html -split_chapter --lang=en --output=. --css-include=./manual.css --init-file ./texi2html.init maxima.texi contents.hhc: maxima.html perl ./create_index # Support for installation of DATA files in a generic directory # with subdirectories. # To use, set genericdir to point to the installation directory. # Set genericdirDATA to hold the list of files to install. # genericdirDATA may contain subdirectories. Subdirectories will # be created if necessary. install-data-local: install-datafiles install-datafiles: $(genericdirDATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(genericdir) @list='$(genericdirDATA)'; for p in $$list; do \ if test -f $(srcdir)/$$p; then \ if test ! -d `dirname $(DESTDIR)$(genericdir)/$$p`; then \ $(mkinstalldirs) `dirname $(DESTDIR)$(genericdir)/$$p`; \ fi; \ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(genericdir)/$$p"; \ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(genericdir)/$$p; \ else if test -f $$p; then \ if test ! -d `dirname $(DESTDIR)$(genericdir)/$$p`; then \ $(mkinstalldirs) `dirname $(DESTDIR)$(genericdir)/$$p`; \ fi; \ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(genericdir)/$$p"; \ $(INSTALL_DATA) $$p $(DESTDIR)$(genericdir)/$$p; \ fi; fi; \ done uninstall-local: uninstall-datafiles uninstall-datafiles: @$(NORMAL_UNINSTALL) list='$(genericdirDATA)'; for p in $$list; do \ rm -f $(DESTDIR)$(genericdir)/$$p; \ done install-data-local: install-maxima-html install-maxima-html: $(htmlname).html @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(htmlinstdir) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list="$(srcdir)/$(htmlname).html $(srcdir)/$(htmlname)_*.html" ; \ for p in $$list; do \ f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`; \ if test -f $(srcdir)/$$f; then \ if test ! -d `dirname $(DESTDIR)$(htmlinstdir)/$$f`; then \ $(mkinstalldirs) `dirname $(DESTDIR)$(htmlinstdir)/$$f`; \ fi; \ echo " $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(htmlinstdir)/$$f"; \ $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(htmlinstdir)/$$f; \ else if test -f $$f; then \ if test ! -d `dirname $(DESTDIR)$(htmlinstdir)/$$f`; then \ $(mkinstalldirs) `dirname $(DESTDIR)$(htmlinstdir)/$$f`; \ fi; \ echo " $(INSTALL_DATA) $$f $(DESTDIR)$(htmlinstdir)/$$f"; \ $(INSTALL_DATA) $$f $(DESTDIR)$(htmlinstdir)/$$f; \ fi; fi; \ done uninstall-local: uninstall-maxima-html uninstall-maxima-html: @$(NORMAL_UNINSTALL) rm -f $(DESTDIR)$(htmlinstdir)/$(htmlname).html rm -f $(DESTDIR)$(htmlinstdir)/$(htmlname)_*.html dist-hook: dist-maxima-html dist-maxima-html: $(htmlname).html @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list="$(srcdir)/$(htmlname).html $(srcdir)/$(htmlname)_*.html" ; \ for p in $$list; do \ f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`; \ test -f $(distdir)/$$f || cp -p $(srcdir)/$$f $(distdir)/$$f; \ done all-local: warn_texinfo dist-hook: check_texinfo install-data-local: install-maxima-index uninstall-local: uninstall-maxima-index install-maxima-index: maxima-index.lisp test -z "$(infodir)" || mkdir -p -- "$(DESTDIR)$(infodir)" $(INSTALL_DATA) maxima-index.lisp "$(DESTDIR)$(infodir)/maxima-index.lisp" uninstall-maxima-index: maxima-index.lisp rm -f "$(DESTDIR)$(infodir)/maxima-index.lisp" clean-local: clean-info clean-local: clean-html clean-info: rm -f maxima.info* rm -f maxima-index.lisp clean-html: rm -f maxima*.html rm -f contents.hhc rm -f index.hhk check_texinfo: pattern=`printf "\r$$"` ; \ bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \ [ -z "$$bad_files" ] || ( echo "ERROR: The following files have DOS-style EOLs: $$bad_files" ; \ echo "Run make distclean and then /doc/info/fix_crlf to fix the problem." ; exit 1 ) pattern=`printf "\t"` ; \ bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \ [ -z "$$bad_files" ] || ( echo "ERROR: The following files have unexpanded Tabs: $$bad_files" ; \ echo "Run make distclean and then /doc/info/fix_tab to fix the problem." ; exit 1 ) warn_texinfo: pattern=`printf "\r$$"` ; \ bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \ [ -z "$$bad_files" ] || ( echo "WARNING: The following files have DOS-style EOLs: $$bad_files" ; \ echo "Run /doc/info/fix_crlf to fix the problem." ) pattern=`printf "\t"` ; \ bad_files=`find . -name '*.texi' -print | xargs grep -l -e "$$pattern"` ; \ [ -z "$$bad_files" ] || ( echo "WARNING: The following files have unexpanded Tabs: $$bad_files" ; \ echo "Run /doc/info/fix_tab to fix the problem." ) .PHONY: check_texinfo warn_texinfo # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: