%modem
#
# This file contains examples of modem configurations
# to be used with the Dialback Security and Dynamic Dial features
# of the Annex Software Revision 8.0.
#
# modem side:
#     If DTR drops, connection hangs up
#     DCD tracks status of carrier detect signal
#     enable RTS/CTS local flow control
#     disable echo
#
# Annex side:
#    set in/out flow control to eia
#    set control_type to both
#    set bidirectional_mode to Y
#

## US Robotics Courier V34
# &F1 for hardware flow control
type_of_modem      CourierV34
ready_status       0
connect_status     1
reset_cmd          AT
modem_setup_cmd    AT &F0 Q2 V1 S0=1 &B1 &C1 &D2 &W
dialout_setup_cmd  AT V0 S0=0 S6=2 X0 &A0 
dial_cmd           ATDT
timeout            40
retry              2
reset_delay        0.0
end

# US Robotics Worldport V32
# &F1 for hardware flow control
type_of_modem      Worldport
ready_status       0
connect_status     1 47
reset_cmd          AT
modem_setup_cmd    AT &F0 Q2 V1 S0=1 &B1 &C1 &D2 &W
dialout_setup_cmd  AT V0 S0=0 S6=2 X0 &A0
dial_cmd           ATDT
timeout            40
retry              2
reset_delay        0.0
end

# Pace Linnet
# NO Q2
type_of_modem      Linnet
ready_status       0
connect_status     1 
reset_cmd          ATQ0
modem_setup_cmd    AT &F &K0 S0=1 V1 &D2 &S0 &W Q1
dialout_setup_cmd  AT Q0 S0=0 V0 X0
dial_cmd           ATDT
timeout            40
retry              2
reset_delay        0.0
end

type_of_modem      Linnet_dialout
ready_status       0
connect_status     1 
reset_cmd          ATQ0
modem_setup_cmd    AT &F &K0 S0=1 V1 &D2 &S0 &W
dialout_setup_cmd  AT Q0 S0=0 V0 X0
dial_cmd           ATDT
timeout            40
retry              2
reset_delay        0.0
end

# Psion Dacomm PDM6F
# NO Q2 So use Q1.
# S1? simulates the 0 response for the command!
type_of_modem      PDM6F
ready_status       0
connect_status     1
reset_cmd          ATQ0
modem_setup_cmd    AT &F E1 S0=1 V1 &C1 &D2 &K0 &S0 &W &Y Q1S1?
dialout_setup_cmd  AT Q0 S0=0 V0 X0
dial_cmd           ATDT
timeout            40
retry              2
reset_delay        0.0
end

# Hayes Smartmodem 1200
# NO Q2
type_of_modem      S1200
ready_status       0
connect_status     1
reset_cmd          ATZ
modem_setup_cmd    AT E1 V1 Q1 S0=1
dialout_setup_cmd  AT Q0 S0=0 V0 X0 
dial_cmd           ATDT
timeout            40
retry              2
reset_delay        0.0
end

# Hayes Optima 288
type_of_modem      Optima288
ready_status       0
connect_status     1 
reset_cmd          AT Z 
modem_setup_cmd    AT &F &K0 Q2 S0=1 V1 &C1 &D2 &W 
dialout_setup_cmd  AT S0=0 V0 X0
dial_cmd           ATDT
timeout            60
retry              2
reset_delay        0.0
end

#
#################################################
# These descriptions do not use modem_setup_cmd #
#################################################
#
# Hayes Optima 96
# profile 0: AT&f  AT&C1  AT&W0
type_of_modem      Optima96
ready_status       0
connect_status     1 5 10 11 12 14 28
reset_cmd          ATZ
dialout_setup_cmd  AT V0 &D3 M0 &Q8 S7=90
dial_cmd           ATDT
timeout            90
retry              1
end

# Hayes Optima 14.4
# profile 0: AT&f  ATS0=1 AT&C1  AT&D3  ATV0  ATQ2  AT&Q9  ATT AT&W0
type_of_modem      Optima144
ready_status       0
connect_status     1 5 10 11 12 13 14 18 28
reset_cmd          ATZ
dialout_setup_cmd  AT E1 V0 &D3 M0 Q2 &C1 &Q9 S7=60
dial_cmd           ATDT
timeout            120
retry              2
end

# USRobotics Courier V.32 bis with ASL
type_of_modem      CourierV32
ready_status       0
connect_status     1 5 10 13 14 15 16 17 18 19 20 21 25 43
reset_cmd          AT&F
dialout_setup_cmd  AT E1 V0 Q2 X1 &B1 &D2 &H1 &K3
dial_cmd           ATDT
timeout            90
retry              2
end

# USRobotics Courier V.34
type_of_modem      CourierV34
ready_status       0
connect_status     1
reset_cmd          ATZ
dialout_setup_cmd  AT E1 Q2 V0 X0 &A0 &B1 &C1 &D2 &H1 &I0 &K1 &R2
dial_cmd           ATDT
timeout            60
retry              3
end

# Cabletron Modmim V.32 or V.34 internal Modem
type_of_modem      CTRON-MODMIM
ready_status       0
connect_status     1
reset_cmd          ATZ
dialout_setup_cmd  AT E1 Q2 V0 X0 &A0 &B1 &C1 &D2 &H1 &I0 &K1 &R2
dial_cmd           ATDT
timeout            60
retry              3
end

# Multi Tech 224
type_of_modem      T224
ready_status       0
connect_status     1 5 10
reset_cmd          AT&F
dialout_setup_cmd  AT E1 V0 Q0 X2 M1
dial_cmd           ATDT
timeout            60
retry              2
end

# Zyxel U1496
type_of_modem      U1496
ready_status       0
connect_status     1 5 10 11 12 14 15 16 17 18 19 20 21
reset_cmd          ATZ4
dialout_setup_cmd  AT V0 M0 S0=1 S7=30
dial_cmd           ATDT
timeout            40
retry              2
end

# Telebit T2500
# profile A: AT&F  ATS58=2 ATS131=1  AT&W0
type_of_modem      T2500
ready_status       0
connect_status     1 5 10 11 12 14 40 46 47 48 50
reset_cmd          ATZ
dialout_setup_cmd  AT E1 V0 Q8 X1 M0 S0=1 S52=2 S58=2 S66=1 S95=2 S96=1 S131=1
dial_cmd           ATDT
timeout            60
retry              2
end

# Telebit TrailBlazer
type_of_modem      TrailBlazer
ready_status       0
connect_status     1 5 10 20 22 23 50 61 62 63 70 71 72 73
reset_cmd          AT&F
dialout_setup_cmd  AT E1 V0 Q7 X3 M0 S51=255 S52=1 S58=2 S66=1 S95=2 S96=1
dial_cmd           ATDT
timeout            40
retry              2
end

# Telebit T3000
# profile A: AT&F  ATS58=2 ATS131=1  AT&W0
type_of_modem      T3000
ready_status       0
connect_status     1 5 10 11 12 13 14 15 16 46 47 48 49
reset_cmd          ATZ
dialout_setup_cmd  AT E1 V0 Q2 X1 M0 S0=1  S58=2  
dial_cmd           ATDT
timeout            60
retry              2
end

# UDS V.3229
type_of_modem      UDS3229
ready_status       0
connect_status     1 5 10 11 12 13 14 15 16 17 18 19 22 23 24 25 26 27 28 29 30 43
reset_cmd          AT&F
dialout_setup_cmd  AT E1 V0 Q2 X1 &C1 &D2 &S1 S0=1 
dial_cmd           ATDT
timeout            90
retry              2
end

#################################################################
# The following entries are for the ISDN Interface on the Annex #
#################################################################
#
# This profile is for:
#	EuroISDN
#	Async transparent mode
type_of_modem       ISDN
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=1000 Z
modem_setup_cmd     AT &O1 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	EuroISDN
#	V.120 mode
type_of_modem       ISDN-V120
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=1000 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	EuroISDN
#	V.120 mode
#	V.42bis compression
type_of_modem       ISDN-V42
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=1000 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 %C2 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	EuroISDN
#	V.110 mode
# Note this is not supported by early firmware.
type_of_modem       ISDN-V110
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=1000 Z
modem_setup_cmd     AT &O9 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	Deutsch Telecom 1TR6
#	V.120 mode
type_of_modem       ISDN-1TR6 ISDN
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=49 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	France Telecom VN6 ISDN
#	V.120 mode
type_of_modem       ISDN-VN6
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=33 #ISDN_VERSION=3 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	AT&T 5ESS9 ISDN
#	V.120 mode
type_of_modem       ISDN-5ESS9
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=1 #ISDN_VERSION=7 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	USA National ISDN-2
#	V.120 mode
type_of_modem       ISDN-5ESS9
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=1 #ISDN_VERSION=20 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	Australia Telecom ISDN
#	V.120 mode
type_of_modem       ISDN-AU
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=61 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end

# This profile is for:
#	NTT INS-64 ISDN
#	V.120 mode
type_of_modem       ISDN-INS64
reset_cmd           AT
ready_status        0
powerup_cmd         AT #COUNTRY_CODE=81 #ISDN_VERSION=0 Z
modem_setup_cmd     AT &O10 E1 V1 Q2 X1 S0=1
dialout_setup_cmd   AT V0 Q0
dial_cmd            ATD
connect_status      1 5 10 11 12 14 18 28 99
timeout             60
retry               2
reset_delay         0.1
end