# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# Configure paths for LIBXML2
# Mike Hommey 2004-06-19
# use CPPFLAGS instead of CFLAGS
# Toshio Kuratomi 2001-04-21
# Adapted from:
# Configure paths for GLIB
# Owen Taylor 97-11-3
dnl AM_PATH_XML2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for XML, and define XML_CPPFLAGS and XML_LIBS
dnl
AC_DEFUN([AM_PATH_XML2],[
AC_ARG_WITH(xml-prefix,
[ --with-xml-prefix=PFX Prefix where libxml is installed (optional)],
xml_config_prefix="$withval", xml_config_prefix="")
AC_ARG_WITH(xml-exec-prefix,
[ --with-xml-exec-prefix=PFX Exec prefix where libxml is installed (optional)],
xml_config_exec_prefix="$withval", xml_config_exec_prefix="")
AC_ARG_ENABLE(xmltest,
[ --disable-xmltest Do not try to compile and run a test LIBXML program],,
enable_xmltest=yes)
if test x$xml_config_exec_prefix != x ; then
xml_config_args="$xml_config_args"
if test x${XML2_CONFIG+set} != xset ; then
XML2_CONFIG=$xml_config_exec_prefix/bin/xml2-config
fi
fi
if test x$xml_config_prefix != x ; then
xml_config_args="$xml_config_args --prefix=$xml_config_prefix"
if test x${XML2_CONFIG+set} != xset ; then
XML2_CONFIG=$xml_config_prefix/bin/xml2-config
fi
fi
AC_PATH_PROG(XML2_CONFIG, xml2-config, no)
min_xml_version=ifelse([$1], ,2.0.0,[$1])
AC_MSG_CHECKING(for libxml - version >= $min_xml_version)
no_xml=""
if test "$XML2_CONFIG" = "no" ; then
no_xml=yes
else
XML_CPPFLAGS=`$XML2_CONFIG $xml_config_args --cflags`
XML_LIBS=`$XML2_CONFIG $xml_config_args --libs`
xml_config_major_version=`$XML2_CONFIG $xml_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
xml_config_minor_version=`$XML2_CONFIG $xml_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
xml_config_micro_version=`$XML2_CONFIG $xml_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_xmltest" = "xyes" ; then
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LIBS="$LIBS"
CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
LIBS="$XML_LIBS $LIBS"
dnl
dnl Now check if the installed libxml is sufficiently new.
dnl (Also sanity checks the results of xml2-config to some extent)
dnl
rm -f conf.xmltest
AC_TRY_RUN([
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <libxml/xmlversion.h>
int
main()
{
int xml_major_version, xml_minor_version, xml_micro_version;
int major, minor, micro;
char *tmp_version;
system("touch conf.xmltest");
/* Capture xml2-config output via autoconf/configure variables */
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = (char *)strdup("$min_xml_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string from xml2-config\n", "$min_xml_version");
exit(1);
}
free(tmp_version);
/* Capture the version information from the header files */
tmp_version = (char *)strdup(LIBXML_DOTTED_VERSION);
if (sscanf(tmp_version, "%d.%d.%d", &xml_major_version, &xml_minor_version, &xml_micro_version) != 3) {
printf("%s, bad version string from libxml includes\n", "LIBXML_DOTTED_VERSION");
exit(1);
}
free(tmp_version);
/* Compare xml2-config output to the libxml headers */
if ((xml_major_version != $xml_config_major_version) ||
(xml_minor_version != $xml_config_minor_version) ||
(xml_micro_version != $xml_config_micro_version))
{
printf("*** libxml header files (version %d.%d.%d) do not match\n",
xml_major_version, xml_minor_version, xml_micro_version);
printf("*** xml2-config (version %d.%d.%d)\n",
$xml_config_major_version, $xml_config_minor_version, $xml_config_micro_version);
return 1;
}
/* Compare the headers to the library to make sure we match */
/* Less than ideal -- doesn't provide us with return value feedback,
* only exits if there's a serious mismatch between header and library.
*/
LIBXML_TEST_VERSION;
/* Test that the library is greater than our minimum version */
if ((xml_major_version > major) ||
((xml_major_version == major) && (xml_minor_version > minor)) ||
((xml_major_version == major) && (xml_minor_version == minor) &&
(xml_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of libxml (%d.%d.%d) was found.\n",
xml_major_version, xml_minor_version, xml_micro_version);
printf("*** You need a version of libxml newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** libxml is always available from ftp://ftp.xmlsoft.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the xml2-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of LIBXML, but you can also set the XML2_CONFIG environment to point to the\n");
printf("*** correct copy of xml2-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
return 1;
}
],, no_xml=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CPPFLAGS="$ac_save_CPPFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_xml" = x ; then
AC_MSG_RESULT(yes (version $xml_config_major_version.$xml_config_minor_version.$xml_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$XML2_CONFIG" = "no" ; then
echo "*** The xml2-config script installed by LIBXML could not be found"
echo "*** If libxml was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the XML2_CONFIG environment variable to the"
echo "*** full path to xml2-config."
else
if test -f conf.xmltest ; then
:
else
echo "*** Could not run libxml test program, checking why..."
CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
LIBS="$LIBS $XML_LIBS"
AC_TRY_LINK([
#include <libxml/xmlversion.h>
#include <stdio.h>
], [ LIBXML_TEST_VERSION; return 0;],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding LIBXML or finding the wrong"
echo "*** version of LIBXML. If it is not finding LIBXML, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means LIBXML was incorrectly installed"
echo "*** or that you have moved LIBXML since it was installed. In the latter case, you"
echo "*** may want to edit the xml2-config script: $XML2_CONFIG" ])
CPPFLAGS="$ac_save_CPPFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
XML_CPPFLAGS=""
XML_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(XML_CPPFLAGS)
AC_SUBST(XML_LIBS)
rm -f conf.xmltest
])
dnl ##
dnl ## GNU Pth - The GNU Portable Threads
dnl ## Copyright (c) 1999-2006 Ralf S. Engelschall <rse@engelschall.com>
dnl ##
dnl ## This file is part of GNU Pth, a non-preemptive thread scheduling
dnl ## library which can be found at http://www.gnu.org/software/pth/.
dnl ##
dnl ## This library is free software; you can redistribute it and/or
dnl ## modify it under the terms of the GNU Lesser General Public
dnl ## License as published by the Free Software Foundation; either
dnl ## version 2.1 of the License, or (at your option) any later version.
dnl ##
dnl ## This library is distributed in the hope that it will be useful,
dnl ## but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl ## Lesser General Public License for more details.
dnl ##
dnl ## You should have received a copy of the GNU Lesser General Public
dnl ## License along with this library; if not, write to the Free Software
dnl ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
dnl ## USA, or contact Ralf S. Engelschall <rse@engelschall.com>.
dnl ##
dnl ## pth.m4: Autoconf macro for locating GNU Pth from within
dnl ## configure.ac of third-party software packages
dnl ##
dnl ##
dnl ## Synopsis:
dnl ## AC_CHECK_PTHSEM([MIN-VERSION [, # minimum Pth version, e.g. 1.2.0
dnl ## DEFAULT-WITH-PTH [, # default value for --with-pth option
dnl ## DEFAULT-WITH-PTH-TEST [,# default value for --with-pth-test option
dnl ## EXTEND-VARS [, # whether CFLAGS/LDFLAGS/etc are extended
dnl ## ACTION-IF-FOUND [, # action to perform if Pth was found
dnl ## ACTION-IF-NOT-FOUND # action to perform if Pth was not found
dnl ## ]]]]]])
dnl ## Examples:
dnl ## AC_CHECK_PTHSEM(1.2.0)
dnl ## AC_CHECK_PTHSEM(1.2.0,,,no,CFLAGS="$CFLAGS -DHAVE_PTH $PTH_CFLAGS")
dnl ## AC_CHECK_PTHSEM(1.2.0,yes,yes,yes,CFLAGS="$CFLAGS -DHAVE_PTH")
dnl ##
dnl
dnl # auxilliary macros
AC_DEFUN([_AC_PTH_ERROR], [dnl
AC_MSG_RESULT([*FAILED*])
m4_define(_ac_pth_line,dnl
"+------------------------------------------------------------------------+")
echo " _ac_pth_line" 1>&2
cat <<EOT | sed -e 's/^[[ ]]*/ | /' -e 's/>>/ /' 1>&2
$1
EOT
echo " _ac_pth_line" 1>&2
exit 1
])
AC_DEFUN([_AC_PTH_VERBOSE], [dnl
if test ".$verbose" = .yes; then
AC_MSG_RESULT([ $1])
fi
])
dnl # the user macro
AC_DEFUN([AC_CHECK_PTHSEM], [dnl
dnl
dnl # prerequisites
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_CPP])dnl
dnl
PTH_CPPFLAGS=''
PTH_CFLAGS=''
PTH_LDFLAGS=''
PTH_LIBS=''
AC_SUBST(PTH_CPPFLAGS)
AC_SUBST(PTH_CFLAGS)
AC_SUBST(PTH_LDFLAGS)
AC_SUBST(PTH_LIBS)
dnl # command line options
AC_MSG_CHECKING(for GNU Pth)
_AC_PTH_VERBOSE([])
AC_ARG_WITH(pth,dnl
[ --with-pth[=ARG] Build with pthsem Library (default=]ifelse([$2],,yes,$2)[)],dnl
,dnl
with_pth="ifelse([$2],,yes,$2)"
)dnl
AC_ARG_WITH(pth-test,dnl
[ --with-pth-test Perform pthsem Sanity Test (default=]ifelse([$3],,yes,$3)[)],dnl
,dnl
with_pth_test="ifelse([$3],,yes,$3)"
)dnl
_AC_PTH_VERBOSE([+ Command Line Options:])
_AC_PTH_VERBOSE([ o --with-pth=$with_pth])
_AC_PTH_VERBOSE([ o --with-pth-test=$with_pth_test])
dnl
dnl # configuration
if test ".$with_pth" != .no; then
_pth_subdir=no
_pth_subdir_opts=''
case "$with_pth" in
subdir:* )
_pth_subdir=yes
changequote(, )dnl
_pth_subdir_opts=`echo $with_pth | sed -e 's/^subdir:[^ ]*[ ]*//'`
with_pth=`echo $with_pth | sed -e 's/^subdir:\([^ ]*\).*$/\1/'`
changequote([, ])dnl
;;
esac
_pth_version=""
_pth_location=""
_pth_type=""
_pth_cppflags=""
_pth_cflags=""
_pth_ldflags=""
_pth_libs=""
if test ".$with_pth" = .yes; then
# via config script in $PATH
changequote(, )dnl
_pth_version=`(pthsem-config --version) 2>/dev/null |\
sed -e 's/^.*\([0-9]\.[0-9]*[ab.][0-9]*\).*$/\1/'`
changequote([, ])dnl
if test ".$_pth_version" != .; then
_pth_location=`pthsem-config --prefix`
_pth_type='installed'
_pth_cppflags=`pthsem-config --cflags`
_pth_cflags=`pthsem-config --cflags`
_pth_ldflags=`pthsem-config --ldflags`
_pth_libs=`pthsem-config --libs --all`
fi
elif test -d "$with_pth"; then
with_pth=`echo $with_pth | sed -e 's;/*$;;'`
_pth_found=no
# via locally included source tree
if test ".$_pth_subdir" = .yes; then
_pth_location="$with_pth"
_pth_type='local'
_pth_cppflags="-I$with_pth"
_pth_cflags="-I$with_pth"
if test -f "$with_pth/ltconfig"; then
_pth_ldflags="-L$with_pth/.libs"
else
_pth_ldflags="-L$with_pth"
fi
_pth_libs="-lpth"
changequote(, )dnl
_pth_version=`grep '^const char PTH_Hello' $with_pth/pth_vers.c |\
sed -e 's;^.*Version[ ]*\([0-9]*\.[0-9]*[.ab][0-9]*\)[ ].*$;\1;'`
changequote([, ])dnl
_pth_found=yes
ac_configure_args="$ac_configure_args --enable-subdir $_pth_subdir_opts"
with_pth_test=no
fi
# via config script under a specified directory
# (a standard installation, but not a source tree)
if test ".$_pth_found" = .no; then
for _dir in $with_pth/bin $with_pth; do
if test -f "$_dir/pthsem-config"; then
test -f "$_dir/pthsem-config.in" && continue # pth-config in source tree!
changequote(, )dnl
_pth_version=`($_dir/pthsem-config --version) 2>/dev/null |\
sed -e 's/^.*\([0-9]\.[0-9]*[ab.][0-9]*\).*$/\1/'`
changequote([, ])dnl
if test ".$_pth_version" != .; then
_pth_location=`$_dir/pthsem-config --prefix`
_pth_type="installed"
_pth_cppflags=`$_dir/pthsem-config --cflags`
_pth_cflags=`$_dir/pthsem-config --cflags`
_pth_ldflags=`$_dir/pthsem-config --ldflags`
_pth_libs=`$_dir/pthsem-config --libs --all`
_pth_found=yes
break
fi
fi
done
fi
# in any subarea under a specified directory
# (either a special installation or a Pth source tree)
if test ".$_pth_found" = .no; then
changequote(, )dnl
_pth_found=0
for _file in x `find $with_pth -name "pthsem.h" -type f -print`; do
test .$_file = .x && continue
_dir=`echo $_file | sed -e 's;[^/]*$;;' -e 's;\(.\)/$;\1;'`
_pth_version=`($_dir/pthsem-config --version) 2>/dev/null |\
sed -e 's/^.*\([0-9]\.[0-9]*[ab.][0-9]*\).*$/\1/'`
if test ".$_pth_version" = .; then
_pth_version=`grep '^#define PTH_VERSION_STR' $_file |\
sed -e 's;^#define[ ]*PTH_VERSION_STR[ ]*"\([0-9]*\.[0-9]*[.ab][0-9]*\)[ ].*$;\1;'`
fi
_pth_cppflags="-I$_dir"
_pth_cflags="-I$_dir"
_pth_found=`expr $_pth_found + 1`
done
for _file in x `find $with_pth -name "libpthsem.[aso]" -type f -print`; do
test .$_file = .x && continue
_dir=`echo $_file | sed -e 's;[^/]*$;;' -e 's;\(.\)/$;\1;'`
_pth_ldflags="-L$_dir"
_pth_libs="-lpthsem"
_pth_found=`expr $_pth_found + 1`
done
changequote([, ])dnl
if test ".$_pth_found" = .2; then
_pth_location="$with_pth"
_pth_type="uninstalled"
else
_pth_version=''
fi
fi
fi
_AC_PTH_VERBOSE([+ Determined Location:])
_AC_PTH_VERBOSE([ o path: $_pth_location])
_AC_PTH_VERBOSE([ o type: $_pth_type])
if test ".$_pth_version" = .; then
if test ".$with_pth" != .yes; then
_AC_PTH_ERROR([dnl
Unable to locate pthsem under $with_pth.
Please specify the correct path to either a pthsem installation tree
(use --with-pth=DIR if you used --prefix=DIR for installing pthsem in
the past) or to a pthsem source tree (use --with-pth=DIR if DIR is a
path to a pthsem-X.Y.Z/ directory; but make sure the package is already
built, i.e., the "configure; make" step was already performed there).])
else
_AC_PTH_ERROR([dnl
Unable to locate pthsem in any system-wide location (see \$PATH).
Please specify the correct path to either a pthsem installation tree
(use --with-pth=DIR if you used --prefix=DIR for installing pthsem in
the past) or to a pthsem source tree (use --with-pth=DIR if DIR is a
path to a pthsem-X.Y.Z/ directory; but make sure the package is already
built, i.e., the "configure; make" step was already performed there).])
fi
fi
dnl #
dnl # Check whether the found version is sufficiently new
dnl #
_req_version="ifelse([$1],,1.0.0,$1)"
for _var in _pth_version _req_version; do
eval "_val=\"\$${_var}\""
_major=`echo $_val | sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\([[ab.]]\)\([[0-9]]*\)/\1/'`
_minor=`echo $_val | sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\([[ab.]]\)\([[0-9]]*\)/\2/'`
_rtype=`echo $_val | sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\([[ab.]]\)\([[0-9]]*\)/\3/'`
_micro=`echo $_val | sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\([[ab.]]\)\([[0-9]]*\)/\4/'`
case $_rtype in
"a" ) _rtype=0 ;;
"b" ) _rtype=1 ;;
"." ) _rtype=2 ;;
esac
_hex=`echo dummy | awk '{ printf("%d%02d%1d%02d", major, minor, rtype, micro); }' \
"major=$_major" "minor=$_minor" "rtype=$_rtype" "micro=$_micro"`
eval "${_var}_hex=\"\$_hex\""
done
_AC_PTH_VERBOSE([+ Determined Versions:])
_AC_PTH_VERBOSE([ o existing: $_pth_version -> 0x$_pth_version_hex])
_AC_PTH_VERBOSE([ o required: $_req_version -> 0x$_req_version_hex])
_ok=0
if test ".$_pth_version_hex" != .; then
if test ".$_req_version_hex" != .; then
if test $_pth_version_hex -ge $_req_version_hex; then
_ok=1
fi
fi
fi
if test ".$_ok" = .0; then
_AC_PTH_ERROR([dnl
Found pthsem version $_pth_version, but required at least version $_req_version.
Upgrade pthsem under $_pth_location to $_req_version or higher first, please.])
fi
dnl #
dnl # Perform Pth Sanity Compile Check
dnl #
if test ".$with_pth_test" = .yes; then
_ac_save_CPPFLAGS="$CPPFLAGS"
_ac_save_CFLAGS="$CFLAGS"
_ac_save_LDFLAGS="$LDFLAGS"
_ac_save_LIBS="$LIBS"
CPPFLAGS="$CPPFLAGS $_pth_cppflags"
CFLAGS="$CFLAGS $_pth_cflags"
LDFLAGS="$LDFLAGS $_pth_ldflags"
LIBS="$LIBS $_pth_libs"
_AC_PTH_VERBOSE([+ Test Build Environment:])
_AC_PTH_VERBOSE([ o CPPFLAGS=\"$CPPFLAGS\"])
_AC_PTH_VERBOSE([ o CFLAGS=\"$CFLAGS\"])
_AC_PTH_VERBOSE([ o LDFLAGS=\"$LDFLAGS\"])
_AC_PTH_VERBOSE([ o LIBS=\"$LIBS\"])
cross_compile=no
m4_define(_code1, [dnl
#include <stdio.h>
#include <pthsem.h>
])
m4_define(_code2, [dnl
int main(int argc, char *argv[])
{
FILE *fp;
if (!(fp = fopen("conftestval", "w")))
exit(1);
fprintf(fp, "hmm");
fclose(fp);
pth_init();
pth_kill();
if (!(fp = fopen("conftestval", "w")))
exit(1);
fprintf(fp, "yes");
fclose(fp);
exit(0);
}
])
_AC_PTH_VERBOSE([+ Performing Sanity Checks:])
_AC_PTH_VERBOSE([ o pre-processor test])
AC_TRY_CPP(_code1, _ok=yes, _ok=no)
if test ".$_ok" != .yes; then
_AC_PTH_ERROR([dnl
Found pthsem $_pth_version under $_pth_location, but
was unable to perform a sanity pre-processor check. This means
the pthsem header pthsem.h was not found.
We used the following build environment:
>> CPP="$CPP"
>> CPPFLAGS="$CPPFLAGS"
See config.log for possibly more details.])
fi
_AC_PTH_VERBOSE([ o link check])
AC_TRY_LINK(_code1, _code2, _ok=yes, _ok=no)
if test ".$_ok" != .yes; then
_AC_PTH_ERROR([dnl
Found pthsem $_pth_version under $_pth_location, but
was unable to perform a sanity linker check. This means
the pthsem library libpthsem.a was not found.
We used the following build environment:
>> CC="$CC"
>> CFLAGS="$CFLAGS"
>> LDFLAGS="$LDFLAGS"
>> LIBS="$LIBS"
See config.log for possibly more details.])
fi
_AC_PTH_VERBOSE([ o run-time check])
AC_TRY_RUN(_code1 _code2, _ok=`cat conftestval`, _ok=no, _ok=no)
if test ".$_ok" != .yes; then
if test ".$_ok" = .no; then
_AC_PTH_ERROR([dnl
Found pthsem $_pth_version under $_pth_location, but
was unable to perform a sanity execution check. This usually
means that the pthsem shared library libpthsem.so is present
but \$LD_LIBRARY_PATH is incomplete to execute a Pth test.
In this case either disable this test via --without-pth-test,
or extend \$LD_LIBRARY_PATH, or build pthsem as a static
library only via its --disable-shared Autoconf option.
We used the following build environment:
>> CC="$CC"
>> CFLAGS="$CFLAGS"
>> LDFLAGS="$LDFLAGS"
>> LIBS="$LIBS"
See config.log for possibly more details.])
else
_AC_PTH_ERROR([dnl
Found pthsem $_pth_version under $_pth_location, but
was unable to perform a sanity run-time check. This usually
means that the pthsem library failed to work and possibly
caused a core dump in the test program. In this case it
is strongly recommended that you re-install pthsem and this
time make sure that it really passes its "make test" procedure.
We used the following build environment:
>> CC="$CC"
>> CFLAGS="$CFLAGS"
>> LDFLAGS="$LDFLAGS"
>> LIBS="$LIBS"
See config.log for possibly more details.])
fi
fi
_extendvars="ifelse([$4],,yes,$4)"
if test ".$_extendvars" != .yes; then
CPPFLAGS="$_ac_save_CPPFLAGS"
CFLAGS="$_ac_save_CFLAGS"
LDFLAGS="$_ac_save_LDFLAGS"
LIBS="$_ac_save_LIBS"
fi
else
_extendvars="ifelse([$4],,yes,$4)"
if test ".$_extendvars" = .yes; then
if test ".$_pth_subdir" = .yes; then
CPPFLAGS="$CPPFLAGS $_pth_cppflags"
CFLAGS="$CFLAGS $_pth_cflags"
LDFLAGS="$LDFLAGS $_pth_ldflags"
LIBS="$LIBS $_pth_libs"
fi
fi
fi
PTH_CPPFLAGS="$_pth_cppflags"
PTH_CFLAGS="$_pth_cflags"
PTH_LDFLAGS="$_pth_ldflags"
PTH_LIBS="$_pth_libs"
AC_SUBST(PTH_CPPFLAGS)
AC_SUBST(PTH_CFLAGS)
AC_SUBST(PTH_LDFLAGS)
AC_SUBST(PTH_LIBS)
_AC_PTH_VERBOSE([+ Final Results:])
_AC_PTH_VERBOSE([ o PTH_CPPFLAGS=\"$PTH_CPPFLAGS\"])
_AC_PTH_VERBOSE([ o PTH_CFLAGS=\"$PTH_CFLAGS\"])
_AC_PTH_VERBOSE([ o PTH_LDFLAGS=\"$PTH_LDFLAGS\"])
_AC_PTH_VERBOSE([ o PTH_LIBS=\"$PTH_LIBS\"])
fi
if test ".$with_pth" != .no; then
AC_MSG_RESULT([version $_pth_version, $_pth_type under $_pth_location])
ifelse([$5], , :, [$5])
else
AC_MSG_RESULT([no])
ifelse([$6], , :, [$6])
fi
])
# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.9.6])])
# Figure out how to run the assembler. -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_PROG_AS
# ----------
AC_DEFUN([AM_PROG_AS],
[# By default we simply use the C compiler to build assembly code.
AC_REQUIRE([AC_PROG_CC])
test "${CCAS+set}" = set || CCAS=$CC
test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 7
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
#serial 3
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 12
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
[define([AC_PROG_CC],
defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$1 | $1:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
am__include=include
am__quote=
_am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
am__include=.include
am__quote="\""
_am_result=BSD
fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
AC_MSG_WARN([`missing' script is too old or missing])
fi
])
# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_MKDIR_P
# ---------------
# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
#
# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
# created by `make install' are always world readable, even if the
# installer happens to have an overly restrictive umask (e.g. 077).
# This was a mistake. There are at least two reasons why we must not
# use `-m 0755':
# - it causes special bits like SGID to be ignored,
# - it may be too restrictive (some setups expect 775 directories).
#
# Do not use -m 0755 and let people choose whatever they expect by
# setting umask.
#
# We cannot accept any implementation of `mkdir' that recognizes `-p'.
# Some implementations (such as Solaris 8's) are not thread-safe: if a
# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
# concurrently, both version can detect that a/ is missing, but only
# one can create it and the other will error out. Consequently we
# restrict ourselves to GNU make (using the --version option ensures
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
# We used to keeping the `.' as first argument, in order to
# allow $(mkdir_p) to be used without argument. As in
# $(mkdir_p) $(somedir)
# where $(somedir) is conditionally defined. However this is wrong
# for two reasons:
# 1. if the package is installed by a user who cannot write `.'
# make install will fail,
# 2. the above comment should most certainly read
# $(mkdir_p) $(DESTDIR)$(somedir)
# so it does not work when $(somedir) is undefined and
# $(DESTDIR) is not.
# To support the latter case, we have to write
# test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
# so the `.' trick is pointless.
mkdir_p='mkdir -p --'
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
# directories to create, and then abort because `.' already
# exists.
for d in ./-p ./--version;
do
test -d $d && rmdir $d
done
# $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
if test -f "$ac_aux_dir/mkinstalldirs"; then
mkdir_p='$(mkinstalldirs)'
else
mkdir_p='$(install_sh) -d'
fi
fi
AC_SUBST([mkdir_p])])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
[am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
syntax highlighted by Code2HTML, v. 0.9.1