#
# Pcap.pm
#
# An interface to the LBL pcap(3) library. This module simply
# bootstraps the extensions defined in Pcap.xs
#
# Copyright (C) 2005, 2006 Sebastien Aperghis-Tramoni. All rights reserved.
# Copyright (C) 2003 Marco Carnut. All rights reserved.
# Copyright (C) 1999-2000 Tim Potter. All rights reserved.
# Copyright (C) 1998 Bo Adler. All rights reserved.
# Copyright (C) 1997 Peter Lister. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the same terms as Perl itself.
#
package Net::Pcap;
use strict;
require Exporter;
use AutoLoader;
use Carp;
{ no strict;
$VERSION = '0.14';
@ISA = qw(Exporter DynaLoader);
%EXPORT_TAGS = (
'bpf' => [qw(
BPF_ALIGNMENT BPF_MAJOR_VERSION BPF_MAXBUFSIZE BPF_MAXINSNS
BPF_MEMWORDS BPF_MINBUFSIZE BPF_MINOR_VERSION BPF_RELEASE
)],
'datalink' => [qw(
DLT_AIRONET_HEADER DLT_APPLE_IP_OVER_IEEE1394 DLT_ARCNET
DLT_ARCNET_LINUX DLT_ATM_CLIP DLT_ATM_RFC1483 DLT_AURORA DLT_AX25
DLT_CHAOS DLT_CHDLC DLT_CISCO_IOS DLT_C_HDLC DLT_DOCSIS DLT_ECONET
DLT_EN10MB DLT_EN3MB DLT_ENC DLT_FDDI DLT_FRELAY DLT_HHDLC
DLT_IBM_SN DLT_IBM_SP DLT_IEEE802 DLT_IEEE802_11 DLT_IEEE802_11_RADIO
DLT_IEEE802_11_RADIO_AVS DLT_IPFILTER DLT_IP_OVER_FC DLT_JUNIPER_ATM1
DLT_JUNIPER_ATM2 DLT_JUNIPER_ES DLT_JUNIPER_GGSN DLT_JUNIPER_MFR
DLT_JUNIPER_MLFR DLT_JUNIPER_MLPPP DLT_JUNIPER_MONITOR DLT_JUNIPER_SERVICES
DLT_LINUX_IRDA DLT_LINUX_SLL DLT_LOOP DLT_LTALK DLT_NULL DLT_OLD_PFLOG
DLT_PCI_EXP DLT_PFLOG DLT_PFSYNC DLT_PPP DLT_PPP_BSDOS DLT_PPP_ETHER
DLT_PPP_SERIAL DLT_PRISM_HEADER DLT_PRONET DLT_RAW DLT_RIO DLT_SLIP
DLT_SLIP_BSDOS DLT_SUNATM DLT_SYMANTEC_FIREWALL DLT_TZSP DLT_USER0
DLT_USER1 DLT_USER2 DLT_USER3 DLT_USER4 DLT_USER5 DLT_USER6 DLT_USER7
DLT_USER8 DLT_USER9 DLT_USER10 DLT_USER11 DLT_USER12 DLT_USER13
DLT_USER14 DLT_USER15
)],
mode => [qw(
MODE_CAPT MODE_MON MODE_STAT
)],
openflag => [qw(
OPENFLAG_PROMISCUOUS OPENFLAG_DATATX_UDP OPENFLAG_NOCAPTURE_RPCAP
)],
pcap => [qw(
PCAP_ERRBUF_SIZE PCAP_IF_LOOPBACK
PCAP_VERSION_MAJOR PCAP_VERSION_MINOR
)],
rpcap => [qw(
RMTAUTH_NULL RMTAUTH_PWD
)],
sample => [qw(
PCAP_SAMP_NOSAMP PCAP_SAMP_1_EVERY_N PCAP_SAMP_FIRST_AFTER_N_MS
)],
source => [qw(
PCAP_SRC_FILE PCAP_SRC_IFLOCAL PCAP_SRC_IFREMOTE
)],
functions => [qw(
lookupdev findalldevs lookupnet
open_live open_dead open_offline pcap_open pcap_close
dump_open pcap_dump dump_close dump_file dump_flush
compile compile_nopcap set_filter freecode
dispatch pcap_next next_ex loop breakloop
datalink set_datalink datalink_name_to_val
datalink_val_to_name datalink_val_to_description
snapshot pcap_file pcap_fileno get_selectable_fd
is_swapped major_version minor_version
geterr strerror perror
lib_version
createsrcstr parsesrcstr
setbuff setuserbuffer setmode setmintocopy getevent sendpacket
sendqueue_alloc sendqueue_queue sendqueue_transmit
)],
);
@EXPORT = (
@{$EXPORT_TAGS{pcap}},
@{$EXPORT_TAGS{datalink}},
);
@EXPORT_OK = (
@{$EXPORT_TAGS{functions}},
@{$EXPORT_TAGS{mode}},
@{$EXPORT_TAGS{openflag}},
@{$EXPORT_TAGS{bpf}},
);
eval {
require XSLoader;
XSLoader::load('Net::Pcap', $VERSION);
1
} or do {
require DynaLoader;
push @ISA, 'DynaLoader';
bootstrap Net::Pcap $VERSION;
};
}
sub AUTOLOAD {
# This AUTOLOAD is used to 'autoload' constants from the constant()
# XS function.
no strict;
my $constname;
($constname = $AUTOLOAD) =~ s/.*:://;
croak "Net::Pcap::constant() not defined" if $constname eq 'constant';
my ($error, $val) = constant($constname);
if ($error) { croak $error; }
{ no strict 'refs';
# Fixed between 5.005_53 and 5.005_61
#XXX if ($] >= 5.00561) {
#XXX *$AUTOLOAD = sub () { $val };
#XXX } else {
*$AUTOLOAD = sub { $val };
#XXX }
}
goto &$AUTOLOAD;
}
# Functions aliases
*Net::Pcap::pcap_open = \&Net::Pcap::open;
*Net::Pcap::pcap_close = \&Net::Pcap::close;
*Net::Pcap::pcap_next = \&Net::Pcap::next;
*Net::Pcap::pcap_dump = \&Net::Pcap::dump;
*Net::Pcap::pcap_file = \&Net::Pcap::file;
*Net::Pcap::pcap_fileno = \&Net::Pcap::fileno;
# Perl wrapper for DWIM
sub findalldevs {
croak "Usage: Net::Pcap::findalldevs(devinfo, err)" unless @_ and @_ <= 2 and ref $_[0];
# findalldevs(\$err), legacy from Marco Carnut 0.05
my %devinfo = ();
( ref $_[0] eq 'SCALAR' and return Net::Pcap::findalldevs_xs(\%devinfo, $_[0]) )
or croak "arg1 not a scalar ref"
if @_ == 1;
# findalldevs(\$err, \%devinfo), legacy from Jean-Louis Morel 0.04.02
ref $_[0] eq 'SCALAR' and (
( ref $_[1] eq 'HASH' and return Net::Pcap::findalldevs_xs($_[1], $_[0]) )
or croak "arg2 not a hash ref"
);
# findalldevs(\%devinfo, \$err), new, correct syntax, consistent with libpcap(3)
ref $_[0] eq 'HASH' and (
( ref $_[1] eq 'SCALAR' and return Net::Pcap::findalldevs_xs($_[0], $_[1]) )
or croak "arg2 not a scalar ref"
);
# if here, the function was called with incorrect arguments
ref $_[0] ne 'HASH' and croak "arg1 not a hash ref";
}
1;
__END__
=head1 NAME
Net::Pcap - Interface to pcap(3) LBL packet capture library
=head1 VERSION
Version 0.14
=head1 SYNOPSIS
use Net::Pcap;
my $err = '';
my $dev = Net::Pcap::lookupdev(\$err); # find a device
# open the device for live listening
my $pcap = Net::Pcap::open_live($dev, 1024, 1, 0, \$err);
# loop over next 10 packets
Net::Pcap::loop($pcap, 10, \&process_packet, "just for the demo");
# close the device
Net::Pcap::close($pcap);
sub process_packet {
my($user_data, $header, $packet) = @_;
# do something ...
}
=head1 DESCRIPTION
C<Net::Pcap> is a Perl binding to the LBL pcap(3) library.
The README for libpcap describes itself as:
"a system-independent interface for user-level packet capture.
libpcap provides a portable framework for low-level network
monitoring. Applications include network statistics collection,
security monitoring, network debugging, etc."
=head1 EXPORTS
C<Net::Pcap> supports the following C<Exporter> tags:
=over 4
=item *
C<:bpf> exports a few BPF related constants:
BPF_ALIGNMENT BPF_MAJOR_VERSION BPF_MAXBUFSIZE BPF_MAXINSNS
BPF_MEMWORDS BPF_MINBUFSIZE BPF_MINOR_VERSION BPF_RELEASE
=item *
C<:datalink> exports the data link types macros:
DLT_AIRONET_HEADER DLT_APPLE_IP_OVER_IEEE1394 DLT_ARCNET
DLT_ARCNET_LINUX DLT_ATM_CLIP DLT_ATM_RFC1483 DLT_AURORA DLT_AX25
DLT_CHAOS DLT_CHDLC DLT_CISCO_IOS DLT_C_HDLC DLT_DOCSIS DLT_ECONET
DLT_EN10MB DLT_EN3MB DLT_ENC DLT_FDDI DLT_FRELAY DLT_HHDLC
DLT_IBM_SN DLT_IBM_SP DLT_IEEE802 DLT_IEEE802_11 DLT_IEEE802_11_RADIO
DLT_IEEE802_11_RADIO_AVS DLT_IPFILTER DLT_IP_OVER_FC DLT_JUNIPER_ATM1
DLT_JUNIPER_ATM2 DLT_JUNIPER_ES DLT_JUNIPER_GGSN DLT_JUNIPER_MFR
DLT_JUNIPER_MLFR DLT_JUNIPER_MLPPP DLT_JUNIPER_MONITOR DLT_JUNIPER_SERVICES
DLT_LINUX_IRDA DLT_LINUX_SLL DLT_LOOP DLT_LTALK DLT_NULL DLT_OLD_PFLOG
DLT_PCI_EXP DLT_PFLOG DLT_PFSYNC DLT_PPP DLT_PPP_BSDOS DLT_PPP_ETHER
DLT_PPP_SERIAL DLT_PRISM_HEADER DLT_PRONET DLT_RAW DLT_RIO DLT_SLIP
DLT_SLIP_BSDOS DLT_SUNATM DLT_SYMANTEC_FIREWALL DLT_TZSP DLT_USER0
DLT_USER1 DLT_USER2 DLT_USER3 DLT_USER4 DLT_USER5 DLT_USER6 DLT_USER7
DLT_USER8 DLT_USER9 DLT_USER10 DLT_USER11 DLT_USER12 DLT_USER13
DLT_USER14 DLT_USER15
=item *
C<:pcap> exports the following C<pcap> constants:
PCAP_ERRBUF_SIZE PCAP_IF_LOOPBACK
PCAP_VERSION_MAJOR PCAP_VERSION_MINOR
=item *
C<:mode> exports the following constants:
MODE_CAPT MODE_MON MODE_STAT
=item *
C<:openflag> exports the following constants:
OPENFLAG_PROMISCUOUS OPENFLAG_DATATX_UDP OPENFLAG_NOCAPTURE_RPCAP
=item *
C<:source> exports the following constants:
PCAP_SRC_FILE PCAP_SRC_IFLOCAL PCAP_SRC_IFREMOTE
=item *
C<:sample> exports the following constants:
PCAP_SAMP_NOSAMP PCAP_SAMP_1_EVERY_N PCAP_SAMP_FIRST_AFTER_N_MS
=item *
C<:rpcap> exports the following constants:
RMTAUTH_NULL RMTAUTH_PWD
=item *
C<:functions> exports the function names, so that you can write C<lookupdev()>
instead of C<Net::Pcap::lookupdev()> for example. As some functions would have
the same name as existing Perl functions, they have been prefixed by C<pcap_>.
This is the case for C<open()>, C<close()>, C<next()>, C<dump()>, C<file()>,
C<fileno()>.
=back
The symbols from the C<:datalink> and C<:pcap> tags are exported by default.
=head1 FUNCTIONS
All functions defined by C<Net::Pcap> are direct mappings to the
libpcap functions. Consult the pcap(3) documentation and source code
for more information.
Arguments that change a parameter, for example C<Net::Pcap::lookupdev()>,
are passed that parameter as a reference. This is to retain
compatibility with previous versions of B<Net::Pcap>.
=head2 Lookup functions
=over 4
=item B<lookupdev(\$err)>
=item B<Net::Pcap::lookupdev(\$err)>
Returns the name of a network device that can be used with
C<Net::Pcap::open_live()> function. On error, the C<$err> parameter
is filled with an appropriate error message else it is undefined.
B<Example>
$dev = Net::Pcap::lookupdev();
=item B<findalldevs(\%devinfo, \$err)>
=item B<Net::Pcap::findalldevs(\%devinfo, \$err)>
Returns a list of all network device names that can be used with
C<Net::Pcap::open_live()> function. On error, the C<$err> parameter
is filled with an appropriate error message else it is undefined.
B<Example>
@devs = Net::Pcap::findalldevs(\%devinfo, \$err);
for my $dev (@devs) {
print "$dev : $devinfo{$dev}\n"
}
B<Note:> For backward compatibility reasons, this function can also
be called using the following signatures:
@devs = Net::Pcap::findalldevs(\$err);
@devs = Net::Pcap::findalldevs(\$err, \%devinfo);
The first form was introduced by Marco Carnut in C<Net::Pcap> version 0.05
and kept intact in versions 0.06 and 0.07.
The second form was introduced by Jean-Louis Morel for the Windows only,
ActivePerl port of C<Net::Pcap>, in versions 0.04.01 and 0.04.02.
The new syntax has been introduced for consistency with the rest of the Perl
API and the C API of C<libpcap(3)>, where C<$err> is always the last argument.
=item B<lookupnet($dev, \$net, \$mask, \$err)>
=item B<Net::Pcap::lookupnet($dev, \$net, \$mask, \$err)>
Determine the network number and netmask for the device specified in
C<$dev>. The function returns 0 on success and sets the C<$net> and
C<$mask> parameters with values. On failure it returns -1 and the
C<$err> parameter is filled with an appropriate error message.
=back
=head2 Packet capture functions
=over 4
=item B<open_live($dev, $snaplen, $promisc, $to_ms, \$err)>
=item B<Net::Pcap::open_live($dev, $snaplen, $promisc, $to_ms, \$err)>
Returns a packet capture descriptor for looking at packets on the
network. The C<$dev> parameter specifies which network interface to
capture packets from. The C<$snaplen> and C<$promisc> parameters specify
the maximum number of bytes to capture from each packet, and whether
to put the interface into promiscuous mode, respectively. The C<$to_ms>
parameter specifies a read timeout in milliseconds. The packet descriptor
will be undefined if an error occurs, and the C<$err> parameter will be
set with an appropriate error message.
B<Example>
$dev = Net::Pcap::lookupdev();
$pcap = Net::Pcap::open_live($dev, 1024, 1, 0, \$err)
or die "Can't open device $dev: $err\n";
=item B<open_dead($linktype, $snaplen)>
=item B<Net::Pcap::open_dead($linktype, $snaplen)>
Creates and returns a new packet descriptor to use when calling the other
functions in C<libpcap>. It is typically used when just using C<libpcap>
for compiling BPF code.
B<Example>
$pcap = Net::Pcap::open_dead(0, 1024);
=item B<open_offline($filename, \$err)>
=item B<Net::Pcap::open_offline($filename, \$err)>
Return a packet capture descriptor to read from a previously created
"savefile". The returned descriptor is undefined if there was an
error and in this case the C<$err> parameter will be filled. Savefiles
are created using the C<Net::Pcap::dump_*> commands.
B<Example>
$pcap = Net::Pcap::open_offline($dump, \$err)
or die "Can't read '$dump': $err\n";
=item B<loop($pcap, $count, \&callback, $user_data)>
=item B<Net::Pcap::loop($pcap, $count, \&callback, $user_data)>
Read C<$count> packets from the packet capture descriptor C<$pcap> and call
the perl function C<&callback> with an argument of C<$user_data>.
If C<$count> is negative, then the function loops forever or until an error
occurs. Returns 0 if C<$count> is exhausted, -1 on error, and -2 if the
loop terminated due to a call to pcap_breakloop() before any packets were
processed.
The callback function is also passed packet header information and
packet data like so:
sub process_packet {
my($user_data, $header, $packet) = @_;
...
}
The header information is a reference to a hash containing the
following fields.
=over 4
=item * C<len>
The total length of the packet.
=item * C<caplen>
The actual captured length of the packet data. This corresponds to
the snapshot length parameter passed to C<Net::Pcap::open_live()>.
=item * C<tv_sec>
Seconds value of the packet timestamp.
=item * C<tv_usec>
Microseconds value of the packet timestamp.
=back
B<Example>
Net::Pcap::loop($pcap, 10, \&process_packet, "user data");
sub process_packet {
my($user_data, $header, $packet) = @_;
# ...
}
=item B<breakloop($pcap)>
=item B<Net::Pcap::breakloop($pcap)>
Sets a flag that will force C<Net::Pcap::dispatch()> or C<Net::Pcap::loop()>
to return rather than looping; they will return the number of packets that
have been processed so far, or -2 if no packets have been processed so far.
This routine is safe to use inside a signal handler on UNIX or a console
control handler on Windows, as it merely sets a flag that is checked within
the loop.
Please see the section on C<pcap_breakloop()> in L<pcap(3)> for more
information.
=item B<pcap_close($pcap)>
=item B<Net::Pcap::close($pcap)>
Close the packet capture device associated with the descriptor C<$pcap>.
=item B<dispatch($pcap, $count, \&callback, $user_data)>
=item B<Net::Pcap::dispatch($pcap, $count, \&callback, $user_data)>
Collect C<$count> packets and process them with callback function
C<&callback>. if C<$count> is -1, all packets currently buffered are
processed. If C<$count> is 0, process all packets until an error occurs.
=item B<pcap_next($pcap, \%header)>
=item B<Net::Pcap::next($pcap, \%header)>
Return the next available packet on the interface associated with
packet descriptor C<$pcap>. Into the C<%header> hash is stored the received
packet header. If not packet is available, the return value and
header is undefined.
=item B<pcap_next_ex($pcap, \%header, \$packet)>
=item B<Net::Pcap::next_ex($pcap, \%header, \$packet)>
Reads the next available packet on the interface associated with packet
descriptor C<$pcap>, stores its header in C<\%header> and its data in
C<\$packet> and returns a success/failure indication:
=over 4
=item *
C<1> means that the packet was read without problems;
=item *
C<0> means that packets are being read from a live capture, and the
timeout expired;
=item *
C<-1> means that an error occurred while reading the packet;
=item *
C<-2> packets are being read from a dump file, and there are no more
packets to read from the savefile.
=back
=item B<compile($pcap, \$filter, $filter_str, $optimize, $netmask)>
=item B<Net::Pcap::compile($pcap, \$filter, $filter_str, $optimize, $netmask)>
Compile the filter string contained in C<$filter_str> and store it in
C<$filter>. A description of the filter language can be found in the
libpcap source code, or the manual page for tcpdump(8) . The filter
is optimized if the C<$optimize> variable is true. The netmask of the
network device must be specified in the C<$netmask> parameter. The
function returns 0 if the compilation was successful, or -1 if there
was a problem.
=item B<compile_nopcap($snaplen, $linktype, \$filter, $filter_str, $optimize, $netmask)>
=item B<Net::Pcap::compile_nopcap($snaplen, $linktype, \$filter, $filter_str, $optimize, $netmask)>
Similar to C<compile()> except that instead of passing a C<$pcap> descriptor,
one passes C<$snaplen> and C<$linktype> directly. Returns -1 if there was an
error, but the error message is not available.
=item B<setfilter($pcap, $filter)>
=item B<Net::Pcap::setfilter($pcap, $filter)>
Associate the compiled filter stored in C<$filter> with the packet
capture descriptor C<$pcap>.
=item B<freecode($filter)>
=item B<Net::Pcap::freecode($filter)>
Used to free the allocated memory used by a compiled filter, as created
by C<pcap_compile()>.
=item B<setnonblock($pcap, $mode, \$err)>
=item B<Net::Pcap::setnonblock($pcap, $mode, \$err)>
Set the I<non-blocking> mode of a live capture descriptor, depending on the
value of C<$mode> (zero to activate and non-zero to deactivate). It has no
effect on offline descriptors. If there is an error, it returns -1 and sets
C<$err>.
In non-blocking mode, an attempt to read from the capture descriptor with
C<pcap_dispatch()> will, if no packets are currently available to be read,
return 0 immediately rather than blocking waiting for packets to arrive.
C<pcap_loop()> and C<pcap_next()> will not work in non-blocking mode.
=item B<getnonblock($pcap, \$err)>
=item B<Net::Pcap::getnonblock($pcap, \$err)>
Returns the I<non-blocking> state of the capture descriptor C<$pcap>.
Always returns 0 on savefiles. If there is an error, it returns -1 and
sets C<$err>.
=back
=head2 Savefile commands
=over 4
=item B<dump_open($pcap, $filename)>
=item B<Net::Pcap::dump_open($pcap, $filename)>
Open a savefile for writing and return a descriptor for doing so. If
C<$filename> is C<"-"> data is written to standard output. On error, the
return value is undefined and C<Net::Pcap::geterr()> can be used to
retrieve the error text.
=item B<pcap_dump($dumper, \%header, $packet)>
=item B<Net::Pcap::dump($dumper, \%header, $packet)>
Dump the packet described by header C<%header> and packet data C<$packet>
to the savefile associated with C<$dumper>. The packet header has the
same format as that passed to the C<Net::Pcap::loop()> callback.
B<Example>
my $dump_file = 'network.dmp';
my $dev = Net::Pcap::lookupdev();
my $pcap = Net::Pcap::open_live($dev, 1024, 1, 0, \$err);
my $dumper = Net::Pcap::dump_open($pcap, $dump_file);
Net::Pcap::loop($pcap, 10, \&process_packet, '');
Net::Pcap::dump_close($dumper);
sub process_packet {
my($user_data, $header, $packet) = @_;
Net::Pcap::dump($dumper, $header, $packet);
}
=item B<dump_file($dumper)>
=item B<Net::Pcap::dump_file($dumper)>
Returns the filehandle associated with a savefile opened with
C<Net::Pcap::dump_open()>.
=item B<dump_flush($dumper)>
=item B<Net::Pcap::dump_flush($dumper)>
Flushes the output buffer to the corresponding save file, so that any
packets written with C<Net::Pcap::dump()> but not yet written to the save
file will be written. Returns -1 on error, 0 on success.
=item B<dump_close($dumper)>
=item B<Net::Pcap::dump_close($dumper)>
Close the savefile associated with the descriptor C<$dumper>.
=back
=head2 Status functions
=over 4
=item B<datalink($pcap)>
=item B<Net::Pcap::datalink($pcap)>
Returns the link layer type associated with the given pcap descriptor.
B<Example>
$linktype = Net::Pcap::datalink($pcap);
=item B<set_datalink($pcap, $linktype)>
=item B<Net::Pcap::set_datalink($pcap, $linktype)>
Sets the data link type of the given pcap descriptor to the type specified
by C<$linktype>. Returns -1 on failure.
=item B<datalink_name_to_val($name)>
=item B<Net::Pcap::datalink_name_to_val($name)>
Translates a data link type name, which is a C<DLT_> name with the C<DLT_>
part removed, to the corresponding data link type value. The translation is
case-insensitive. Returns -1 on failure.
B<Example>
$linktype = Net::Pcap::datalink_name_to_val('LTalk'); # returns DLT_LTALK
=item B<datalink_val_to_name($linktype)>
=item B<Net::Pcap::datalink_val_to_name($linktype)>
Translates a data link type value to the corresponding data link type name.
B<Example>
$name = Net::Pcap::datalink_val_to_name(DLT_LTALK); # returns 'LTALK'
=item B<datalink_val_to_description($linktype)>
=item B<Net::Pcap::datalink_val_to_description($linktype)>
Translates a data link type value to a short description of that data link type.
B<Example>
$descr = Net::Pcap::datalink_val_to_description(DLT_LTALK); # returns 'Localtalk'
=item B<snapshot($pcap)>
=item B<Net::Pcap::snapshot($pcap)>
Returns the snapshot length (snaplen) specified in the call to
C<Net::Pcap::open_live()>.
=item B<is_swapped($pcap)>
=item B<Net::Pcap::is_swapped($pcap)>
This function returns true if the endianness of the currently open
savefile is different from the endianness of the machine.
=item B<major_version($pcap)>
=item B<Net::Pcap::major_version($pcap)>
Return the major version number of the pcap library used to write the
currently open savefile.
=item B<minor_version($pcap)>
=item B<Net::Pcap::minor_version($pcap)>
Return the minor version of the pcap library used to write the
currently open savefile.
=item B<stats($pcap, \%stats)>
=item B<Net::Pcap::stats($pcap, \%stats)>
Returns a hash containing information about the status of packet
capture device C<$pcap>. The hash contains the following fields.
=over 4
=item * C<ps_recv>
The number of packets received by the packet capture software.
=item * C<ps_drop>
The number of packets dropped by the packet capture software.
=item * C<ps_ifdrop>
The number of packets dropped by the network interface.
=back
=item B<pcap_file($pcap)>
=item B<Net::Pcap::file($pcap)>
Returns the filehandle associated with a savefile opened with
C<Net::Pcap::open_offline()> or C<undef> if the device was opened
with C<Net::pcap::open_live()>..
=item B<pcap_fileno($pcap)>
=item B<Net::Pcap::fileno($pcap)>
Returns the file number of the network device opened with
C<Net::Pcap::open_live()>.
=item B<get_selectable_fd($pcap)>
=item B<Net::Pcap::get_selectable_fdfileno($pcap)>
Returns, on Unix, a file descriptor number for a file descriptor on which
one can do a C<select()> or C<poll()> to wait for it to be possible to read
packets without blocking, if such a descriptor exists, or -1, if no such
descriptor exists. Some network devices opened with C<Net::Pcap::open_live()>
do not support C<select()> or C<poll()>, so -1 is returned for those devices.
See L<pcap(3)> for more details.
=back
=head2 Error handling
=over 4
=item B<geterr($pcap)>
=item B<Net::Pcap::geterr($pcap)>
Returns an error message for the last error associated with the packet
capture device C<$pcap>.
=item B<strerror($errno)>
=item B<Net::Pcap::strerror($errno)>
Returns a string describing error number C<$errno>.
=item B<perror($pcap, $prefix)>
=item B<Net::Pcap::perror($pcap, $prefix)>
Prints the text of the last error associated with descriptor C<$pcap> on
standard error, prefixed by C<$prefix>.
=back
=head2 Information
=over 4
=item B<lib_version()>
=item B<Net::Pcap::lib_version()>
Returns the name and version of the C<pcap> library the module was linked
against.
=back
=head2 WinPcap specific functions
The following functions are only available with WinPcap, the Win32 port
of the Pcap library. If a called function is not available, it will cleanly
C<croak()>.
=over 4
=item B<createsrcstr(\$source, $type, $host, $port, $name, \$err)>
=item B<Net::Pcap::createsrcstr(\$source, $type, $host, $port, $name, \$err)>
Accepts a set of strings (host name, port, ...), and stores the complete
source string according to the new format (e.g. C<"rpcap://1.2.3.4/eth0">)
in C<$source>.
This function is provided in order to help the user creating the source string
according to the new format. An unique source string is used in order to make
easy for old applications to use the remote facilities. Think about B<tcpdump(1)>,
for example, which has only one way to specify the interface on which the capture
has to be started. However, GUI-based programs can find more useful to specify
hostname, port and interface name separately. In that case, they can use this
function to create the source string before passing it to the C<pcap_open()>
function.
Returns 0 if everything is fine, -1 if some errors occurred. The string
containing the complete source is returned in the C<$source> variable.
=item B<parsesrcstr($source, \$type, \$host, \$port, \$name, \$err)>
=item B<Net::Pcap::parsesrcstr($source, \$type, \$host, \$port, \$name, \$err)>
Parse the source string and stores the pieces in which the source can be split
in the corresponding variables.
This call is the other way round of C<pcap_createsrcstr()>. It accepts a
null-terminated string and it returns the parameters related to the source.
This includes:
=over 4
=item *
the type of the source (file, WinPcap on a remote adapter, WinPcap on local
adapter), which is determined by the source prefix (C<PCAP_SRC_IF_STRING>
and so on);
=item *
the host on which the capture has to be started (only for remote captures);
=item *
the raw name of the source (file name, name of the remote adapter, name of
the local adapter), without the source prefix. The string returned does not
include the type of the source itself (i.e. the string returned does not
include C<"file://"> or C<"rpcap://"> or such).
=back
The user can omit some parameters in case it is not interested in them.
Returns 0 if everything is fine, -1 if some errors occurred. The requested
values (host name, network port, type of the source) are returned into the
proper variables passed by reference.
=item B<pcap_open($source, $snaplen, $flags, $read_timeout, \$auth, \$err)>
=item B<Net::Pcap::open($source, $snaplen, $flags, $read_timeout, \$auth, \$err)>
Open a generic source in order to capture / send (WinPcap only) traffic.
The C<pcap_open()> replaces all the C<pcap_open_xxx()> functions with a single
call.
This function hides the differences between the different C<pcap_open_xxx()>
functions so that the programmer does not have to manage different opening
function. In this way, the I<true> C<open()> function is decided according to the
source type, which is included into the source string (in the form of source
prefix).
Returns a pointer to a pcap descriptor which can be used as a parameter to
the following calls (C<compile()> and so on) and that specifies an opened
WinPcap session. In case of problems, it returns C<undef> and the C<$err>
variable keeps the error message.
=item B<setbuff($pcap, $dim)>
=item B<Net::Pcap::setbuff($pcap, $dim)>
Sets the size of the kernel buffer associated with an adapter.
C<$dim> specifies the size of the buffer in bytes.
The return value is 0 when the call succeeds, -1 otherwise.
If an old buffer was already created with a previous call to
C<setbuff()>, it is deleted and its content is discarded.
C<open_live()> creates a S<1 MB> buffer by default.
=item B<setuserbuffer($pcap, $size)>
=item B<Net::Pcap::setbuff($pcap, $size)>
I<Note: Undocumented public function>
=item B<setmode($pcap, $mode)>
=item B<Net::Pcap::setmode($pcap, $mode)>
Sets the working mode of the interface C<$pcap> to C<$mode>.
Valid values for C<$mode> are C<MODE_CAPT> (default capture mode) and
C<MODE_STAT> (statistical mode).
=item B<setmintocopy($pcap, $size)>
=item B<Net::Pcap::setmintocopy($pcap_t, $size)>
Changes the minimum amount of data in the kernel buffer that causes a read
from the application to return (unless the timeout expires).
=item B<getevent($pcap)>
=item B<Net::Pcap::getevent($pcap)>
Returns the C<Win32::Event> object associated with the interface
C<$pcap>. Can be used to wait until the driver's buffer contains some
data without performing a read. See L<Win32::Event>.
=item B<sendpacket($pcap, $packet)>
=item B<Net::Pcap::sendpacket($pcap, $packet)>
Send a raw packet to the network. C<$pcap> is the interface that will be
used to send the packet, C<$packet> contains the data of the packet to send
(including the various protocol headers). The MAC CRC doesn't need to be
included, because it is transparently calculated and added by the network
interface driver. The return value is 0 if the packet is successfully sent,
-1 otherwise.
=item B<sendqueue_alloc($memsize)>
=item B<Net::Pcap::sendqueue_alloc($memsize)>
This function allocates and returns a send queue, i.e. a buffer containing
a set of raw packets that will be transmitted on the network with
C<sendqueue_transmit()>.
C<$memsize> is the size, in bytes, of the queue, therefore it determines
the maximum amount of data that the queue will contain. This memory is
automatically deallocated when the queue ceases to exist.
=item B<sendqueue_queue($queue, \%header, $packet)>
=item B<Net::Pcap::sendqueue_queue($queue, \%header, $packet)>
Adds a packet at the end of the send queue pointed by C<$queue>. The packet
header C<%header> has the same format as that passed to the C<loop()>
callback. C<$ackekt> is a buffer with the data of the packet.
The C<%headerr> header structure is the same used by WinPcap and libpcap to
store the packets in a file, therefore sending a capture file is
straightforward. "Raw packet" means that the sending application will have
to include the protocol headers, since every packet is sent to the network
I<as is>. The CRC of the packets needs not to be calculated, because it will
be transparently added by the network interface.
=item B<sendqueue_transmit($pcap, $queue, $sync)>
=item B<Net::Pcap::sendqueue_transmit($pcap, $queue, $sync)>
This function transmits the content of a queue to the wire. C<$pcapt> is
the interface on which the packets will be sent, C<$queue> is to a
C<send_queue> containing the packets to send, C<$sync> determines if the
send operation must be synchronized: if it is non-zero, the packets are
sent respecting the timestamps, otherwise they are sent as fast as
possible.
The return value is the amount of bytes actually sent. If it is smaller
than the size parameter, an error occurred during the send. The error can
be caused by a driver/adapter problem or by an inconsistent/bogus send
queue.
=back
=head1 CONSTANTS
C<Net::Pcap> exports by default the names of several constants in order to
ease the development of programs. See L</"EXPORTS"> for details about which
constants are exported.
Here are the descriptions of a few data link types. See L<pcap(3)> for a more
complete description and semantics associated with each data link.
=over 4
=item *
C<DLT_NULL> - BSD loopback encapsulation
=item *
C<DLT_EN10MB> - Ethernet (10Mb, 100Mb, 1000Mb, and up)
=item *
C<DLT_RAW> - raw IP
=item *
C<DLT_IEEE802> - IEEE 802.5 Token Ring
=item *
C<DLT_IEEE802_11> - IEEE 802.11 wireless LAN
=item *
C<DLT_FRELAY> - Frame Relay
=item *
C<DLT_FDDI> - FDDI
=item *
C<DLT_SLIP> - Serial Line IP
=item *
C<DLT_PPP> - PPP (Point-to-point Protocol)
=item *
C<DLT_PPP_SERIAL> - PPP over serial with HDLC encapsulation
=item *
C<DLT_PPP_ETHER> - PPP over Ethernet
=item *
C<DLT_IP_OVER_FC> - RFC 2625 IP-over-Fibre Channel
=item *
C<DLT_AX25> - Amateur Radio AX.25
=item *
C<DLT_LINUX_IRDA> - Linux-IrDA
=item *
C<DLT_LTALK> - Apple LocalTalk
=item *
C<DLT_APPLE_IP_OVER_IEEE1394> - Apple IP-over-IEEE 1394 (a.k.a. Firewire)
=back
=head1 DIAGNOSTICS
=over 4
=item arg%d not a scalar ref
=item arg%d not a hash ref
=item arg%d not a reference
B<(F)> These errors occur if you forgot to give a reference to a function
which expect one or more of its arguments to be references.
=back
=head1 LIMITATIONS
The following limitations apply to this version of C<Net::Pcap>.
=over
=item *
At present, only one callback function and user data scalar can be
current at any time as they are both stored in global variables.
=back
=head1 BUGS
Please report any bugs or feature requests to
C<bug-Net-Pcap@rt.cpan.org>, or through the web interface at
L<https://rt.cpan.org/NoAuth/Bugs.html?Dist=Net-Pcap>.
I will be notified, and then you'll automatically be notified
of progress on your bug as I make changes.
Currently known bugs:
=over 4
=item *
the C<ps_recv> field is not correctly set; see F<t/07-stats.t>
=item *
C<Net::Pcap::file()> seems to always returns C<undef> for live
connection and causes segmentation fault for dump files;
see F<t/10-fileno.t>
=item *
C<Net::Pcap::fileno()> is documented to return -1 when called
on save file, but seems to always return an actual file number.
See F<t/10-fileno.t>
=item *
C<Net::Pcap::dump_file()> seems to corrupt something somewhere,
and makes scripts dump core. See F<t/05-dump.t>
=back
=head1 EXAMPLES
See the F<eg/> and F<t/> directories of the C<Net::Pcap> distribution
for examples on using this module.
=head1 SEE ALSO
L<pcap(3)>, L<tcpdump(8)>
The source code for the C<pcap(3)> library is available from L<http://www.tcpdump.org/>
The source code and binary for the Win32 version of the pcap library, WinPcap,
is available from L<http://www.winpcap.org/>
I<Hacking Linux Exposed: Sniffing with Net::Pcap to stealthily managing iptables rules remotely>,
L<http://www.hackinglinuxexposed.com/articles/20030730.html>
I<PerlMonks node about C<Net::Pcap>>, L<http://perlmonks.org/?node_id=170648>
=head1 AUTHORS
Current maintainer is SE<eacute>bastien Aperghis-Tramoni (SAPER)
E<lt>sebastien@aperghis.netE<gt> with the help of Jean-Louis Morel (JLMOREL)
E<lt>jl_morel@bribes.orgE<gt> for WinPcap support.
Previous authors & maintainers:
=over 4
=item *
Marco Carnut (KCARNUT) E<lt>kiko@tempest.com.brE<gt>
=item *
Tim Potter (TIMPOTTER) E<lt>tpot@frungy.orgE<gt>
=item *
Bo Adler (BOADLER) E<lt>thumper@alumni.caltech.eduE<gt>
=item *
Peter Lister (PLISTER) E<lt>p.lister@cranfield.ac.ukE<gt>
=back
=head1 ACKNOWLEDGEMENTS
To Paul Johnson for his module C<Devel::Cover> and his patience for
helping me using it with XS code, which revealed very useful for
writing more tests.
To the beta-testers: Jean-Louis Morel, Max Maischen, Philippe Bruhat,
David Morel, Scott Lanning, Rafael Garcia-Suarez, Karl Y. Pradene.
=head1 COPYRIGHT
Copyright (C) 2005, 2006 SE<eacute>bastien Aperghis-Tramoni. All rights reserved.
Copyright (C) 2003 Marco Carnut. All rights reserved.
Copyright (C) 1999-2000 Tim Potter. All rights reserved.
Copyright (C) 1998 Bo Adler. All rights reserved.
Copyright (C) 1997 Peter Lister. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.
=cut
syntax highlighted by Code2HTML, v. 0.9.1