/*
 * $Id: nntp.h,v 1.2 2002/06/06 14:21:06 conrads Exp $
 *
 * Borrowed from INN with a few minor mods
 * 
 *  Here be a set of NNTP response codes as defined in RFC977 and elsewhere.
 *  The reponse codes are three digits, RFI, defined like this:
 *	R, Response:
 *		1xx	Informative message
 *		2xx	Command ok
 *		3xx	Command ok so far, send the rest of it.
 *		4xx	Command was correct, but couldn't be performed for
 *			some reason.
 *		5xx	Command unimplemented, or incorrect, or a serious
 *			program error occurred.
 *	F, Function:
 *		x0x	Connection, setup, and miscellaneous messages
 *		x1x	Newsgroup selection
 *		x2x	Article selection
 *		x3x	Distribution functions
 *		x4x	Posting
 *		x8x	Nonstandard extensions (AUTHINFO, XGTITLE)
 *		x9x	Debugging output
 *	I, Information:
 *		No defined semantics
 */
#define NNTP_HELPOK_VAL			100
#define NNTP_BAD_COMMAND_VAL		500
#define NNTP_BAD_COMMAND		"500 Syntax error or bad command"
#define NNTP_TEMPERR_VAL		503
#define NNTP_ACCESS			"502 Permission denied"
#define NNTP_ACCESS_VAL			502
#define NNTP_GOODBYE_ACK		"205 ."
#define NNTP_GOODBYE_ACK_VAL		205
#define NNTP_GOODBYE			"400"
#define NNTP_GOODBYE_VAL		400
#define NNTP_HAVEIT			"435 Duplicate"
#define NNTP_HAVEIT_BADID		"435 Bad Message-ID"
#define NNTP_HAVEIT_VAL			435
#define NNTP_LIST_FOLLOWS		"215"
#define NNTP_LIST_FOLLOWS_VAL		215
#define NNTP_HELP_FOLLOWS		"100 Legal commands"
#define NNTP_HELP_FOLLOWS_VAL		100
#define NNTP_NOTHING_FOLLOWS		"223"
#define NNTP_NOTHING_FOLLOWS_VAL	223
#define NNTP_ARTICLE_FOLLOWS		"220"
#define NNTP_ARTICLE_FOLLOWS_VAL	220
#define NNTP_NEWGROUPS_FOLLOWS_VAL	231
#define NNTP_HEAD_FOLLOWS		"221"
#define NNTP_HEAD_FOLLOWS_VAL		221
#define NNTP_BODY_FOLLOWS_VAL		222
#define NNTP_OVERVIEW_FOLLOWS		"224"
#define NNTP_OVERVIEW_FOLLOWS_VAL	224
#define NNTP_DATE_FOLLOWS_VAL		111
#define NNTP_POSTOK			"200"
#define NNTP_POSTOK_VAL			200
#define NNTP_START_POST_VAL		340
#define NNTP_NOPOSTOK_VAL		201
#define NNTP_SLAVEOK_VAL		202
#define NNTP_REJECTIT_VAL		437
#define NNTP_REJECTIT_EMPTY		"437 Empty article"
#define NNTP_DONTHAVEIT			"430"
#define NNTP_DONTHAVEIT_VAL		430
#define NNTP_RESENDIT_LATER             "436 Retry later"
#define NNTP_RESENDIT_VAL		436
#define NNTP_POSTEDOK			"240 Article posted"
#define NNTP_POSTEDOK_VAL		240
#define NNTP_POSTFAIL_VAL		441
#define NNTP_GROUPOK			"211"
#define NNTP_GROUPOK_VAL		211
#define NNTP_SENDIT			"335"
#define NNTP_SENDIT_VAL			335
#define NNTP_SYNTAX_USE			"501 Bad command use"
#define NNTP_SYNTAX_VAL			501
#define NNTP_TOOKIT			"235"
#define NNTP_TOOKIT_VAL			235
#define NNTP_NOTINGROUP			"412 Not in a newsgroup"
#define NNTP_NOTINGROUP_VAL		412
#define NNTP_NOSUCHGROUP		"411 No such group"
#define NNTP_NOSUCHGROUP_VAL		411
#define NNTP_NEWNEWSOK			"230 New news follows"
#define NNTP_NOARTINGRP			"423 Bad article number"
#define NNTP_NOARTINGRP_VAL		423
#define NNTP_NOCURRART			"420 No current article"
#define NNTP_NOCURRART_VAL		420
#define NNTP_NONEXT_VAL			421
#define NNTP_NOPREV_VAL			422
#define NNTP_CANTPOST			"440 Posting not allowed"
#define NNTP_CANTPOST_VAL		440
#define NNTP_SERVER_TOOBUSY		"504 Server overloaded, try later"
#define NNTP_SERVER_TOOBUSY_VAL		504
#define NNTP_TOO_MANY_CONNECTS		"505 Connection rejected, you're making too many connects per minute"
#define NNTP_TOO_MANY_CONNECTS_VAL	505

/* new entries for the "streaming" protocol */
/* response to "mode stream" else 500 if stream not supported */
#define NNTP_OK_STREAM_VAL		203	/* Streaming supported */

/* response to "check <id>".  Must include ID of article.
 * Example: "431 <1234@host.domain>"
 */
#define NNTP_OK_SENDID_VAL		238	/* I want article <id> */
#define NNTP_RESENDID_VAL		431	/* try <id> again later */
#define NNTP_ERR_GOTID			"438"	/* Got <id>, don't send */
#define NNTP_ERR_GOTID_VAL		438	/* Got <id>, don't send */

/* responses to "takethis <id>.  Must include ID of article */
#define NNTP_OK_RECID_VAL		239	/* Article <id> received OK */
#define NNTP_ERR_FAILID_VAL		439	/* Transfer of <id> failed */

/* End of new entries for the "streaming" protocol */

/*
 *  The first character of an NNTP reply can be used as a category class.
 */
#define NNTP_CLASS_OK			'2'
#define NNTP_CLASS_ERROR		'4'
#define NNTP_CLASS_FATAL		'5'


/*
 *  Authentication commands from the RFC update (not official).
 */
#define NNTP_AUTH_NEEDED		"480"
#define NNTP_AUTH_NEEDED_VAL		480
#define NNTP_AUTH_BAD			"481"
#define NNTP_AUTH_NEXT			"381"
#define NNTP_AUTH_NEXT_VAL		381
#define NNTP_AUTH_OK			"281"
#define NNTP_AUTH_OK_VAL		281
#define NNTP_AUTH_REJECT_VAL		482

/*
 *  Starttls commands (not official).
 */
#define NNTP_STARTTLS_NEXT		"382"
#define NNTP_STARTTLS_NEXT_VAL	382
#define NNTP_STARTTLS_DONE		"483"
#define NNTP_STARTTLS_DONE_VAL	483
#define NNTP_STARTTLS_BAD		"580"
#define NNTP_STARTTLS_BAD_VAL	580

/*
 *  XGTITLE, from ANU news.
 */
#define NNTP_XGTITLE_BAD		481	/* Yes, 481. */
#define NNTP_XGTITLE_OK			282

#define NNTP_OK_XBATCHED_VAL	239	/* Batch transferred successfully */
#define NNTP_OK_XBATCHED	"239"
#define NNTP_CONT_XBATCH_VAL	339	/* Continue to send batch */
#define NNTP_CONT_XBATCH	"339"
/* and one more meaning for the 436 code NNTP_RESENDIT_VAL */
#define NNTP_RESENDIT_XBATCHERR	"436 xbatch failed: "
/* and one more meaning for the 501 code NNTP_SYNTAX_USE */
#define NNTP_XBATCH_BADSIZE	"501 Invalid or missing size for xbatch"

#define NNTP_STRLEN			512

/* Consensus on the USEFOR mailing list in June of 2000 indicates that the
   next revision of the Usenet article standard will limit the length of the
   message ID to 250 characters.  This is also the limit recommended by
   son-of-1036.

   You can increase this limit if you want, but don't increase it above 497.
   RFC 977 limits each line of the NNTP protocol to 512 octets, including
   the terminating CRLF.  For a message ID to be passed using the TAKETHIS
   command, it can therefore be a maximum of 501 octets.  The November 1999
   draft of the replacement RFC limits it to 497 octets.

   Both Cyclone and DNews are known to reject message IDs longer than 500
   octets as of June of 2000.  DNews has been reported to have problems with
   message IDs of 494 octets. */

#define NNTP_MSGID_MAXLEN       250