# Makefile.in generated automatically by automake 1.5 from Makefile.am. # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # $Header: /pub/cvsroot/yencode/src/Makefile.am,v 1.29 2002/03/16 05:29:14 bboy Exp $ SHELL = /bin/sh srcdir = . top_srcdir = .. prefix = exec_prefix = ${prefix} bindir = ${exec_prefix}/bin sbindir = ${exec_prefix}/sbin libexecdir = ${exec_prefix}/libexec datadir = ${prefix}/share sysconfdir = ${prefix}/etc sharedstatedir = ${prefix}/com localstatedir = ${prefix}/var libdir = ${exec_prefix}/lib infodir = ${prefix}/info mandir = ${prefix}/man includedir = ${prefix}/include oldincludedir = /usr/include pkgdatadir = $(datadir)/yencode pkglibdir = $(libdir)/yencode pkgincludedir = $(includedir)/yencode top_builddir = .. ACLOCAL = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run aclocal AUTOCONF = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run autoconf AUTOMAKE = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run automake AUTOHEADER = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run autoheader INSTALL = /usr/bin/install -c -o root -g wheel INSTALL_PROGRAM = install -s -o root -g wheel -m 555 INSTALL_DATA = install -o root -g wheel -m 444 INSTALL_SCRIPT = install -o root -g wheel -m 555 INSTALL_HEADER = $(INSTALL_DATA) transform = s,x,x, NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = i386-unknown-gnu host_triplet = i386-unknown-gnu AMTAR = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run tar AWK = mawk BUILD_INCLUDED_LIBINTL = no CATALOGS = CATOBJEXT = .gmo CC = cc DATADIRNAME = share DEPDIR = .deps EXEEXT = GENCAT = gencat GLIBC21 = no GMOFILES = GMSGFMT = /usr/local/bin/msgfmt INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s INSTOBJEXT = .mo INTLBISON = bison INTLLIBS = -lintl -liconv INTLOBJS = INTL_LIBTOOL_SUFFIX_PREFIX = LIBICONV = -liconv LN_S = ln -s MKINSTALLDIRS = ./mkinstalldirs MSGFMT = /usr/local/bin/msgfmt OBJEXT = PACKAGE = yencode POFILES = POSUB = po RANLIB = ranlib USE_INCLUDED_LIBINTL = no USE_NLS = yes VERSION = 0.46 am__include = include am__quote = install_sh = /mnt/gmirror/ports/news/yencode/work/yencode-0.46/install-sh bin_PROGRAMS = yencode ydecode SUBDIRS = ypost EXTRA_DIST = localedir = $(datadir)/locale INCLUDES = -I../lib -I../intl DEFS = -DLOCALEDIR=\"$(localedir)\" -DSYSTYPE=\"$(host_triplet)\" LDADD = ../lib/libmisc.a -lintl -liconv AM_CFLAGS = -Wall -Wno-unused sharedsrc = y.h crc.c crc.h file.c file.h output.c output.h yencode_SOURCES = yencode.c $(sharedsrc) support.c support.h ydecode_SOURCES = ydecode.c $(sharedsrc) subdir = src mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = bin_PROGRAMS = yencode$(EXEEXT) ydecode$(EXEEXT) PROGRAMS = $(bin_PROGRAMS) am_ydecode_OBJECTS = ydecode.$(OBJEXT) crc.$(OBJEXT) file.$(OBJEXT) \ output.$(OBJEXT) ydecode_OBJECTS = $(am_ydecode_OBJECTS) ydecode_LDADD = $(LDADD) ydecode_DEPENDENCIES = ../lib/libmisc.a ydecode_LDFLAGS = am_yencode_OBJECTS = yencode.$(OBJEXT) crc.$(OBJEXT) file.$(OBJEXT) \ output.$(OBJEXT) support.$(OBJEXT) yencode_OBJECTS = $(am_yencode_OBJECTS) yencode_LDADD = $(LDADD) yencode_DEPENDENCIES = ../lib/libmisc.a yencode_LDFLAGS = DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) CPPFLAGS = -I/usr/local/include LDFLAGS = -L/usr/local/lib LIBS = depcomp = $(SHELL) $(top_srcdir)/depcomp DEP_FILES = $(DEPDIR)/crc.Po $(DEPDIR)/file.Po \ $(DEPDIR)/output.Po $(DEPDIR)/support.Po \ $(DEPDIR)/ydecode.Po $(DEPDIR)/yencode.Po COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = -fno-common DIST_SOURCES = $(ydecode_SOURCES) $(yencode_SOURCES) RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ uninstall-info-recursive all-recursive install-data-recursive \ install-exec-recursive installdirs-recursive install-recursive \ uninstall-recursive check-recursive installcheck-recursive DIST_COMMON = Makefile.am Makefile.in TODO DIST_SUBDIRS = $(SUBDIRS) SOURCES = $(ydecode_SOURCES) $(yencode_SOURCES) all: all-recursive .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && \ CONFIG_HEADERS= CONFIG_LINKS= \ CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ rm -f $(DESTDIR)$(bindir)/$$f; \ done clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) ydecode$(EXEEXT): $(ydecode_OBJECTS) $(ydecode_DEPENDENCIES) @rm -f ydecode$(EXEEXT) $(LINK) $(ydecode_LDFLAGS) $(ydecode_OBJECTS) $(ydecode_LDADD) $(LIBS) yencode$(EXEEXT): $(yencode_OBJECTS) $(yencode_DEPENDENCIES) @rm -f yencode$(EXEEXT) $(LINK) $(yencode_LDFLAGS) $(yencode_OBJECTS) $(yencode_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c include $(DEPDIR)/crc.Po include $(DEPDIR)/file.Po include $(DEPDIR)/output.Po include $(DEPDIR)/support.Po include $(DEPDIR)/ydecode.Po include $(DEPDIR)/yencode.Po distclean-depend: -rm -rf $(DEPDIR) .c.o: source='$<' object='$@' libtool=no \ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \ $(CCDEPMODE) $(depcomp) \ $(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< .c.obj: source='$<' object='$@' libtool=no \ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \ $(CCDEPMODE) $(depcomp) \ $(COMPILE) -c `cygpath -w $<` CCDEPMODE = depmode=gcc3 uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || etags $(ETAGS_ARGS) $$tags $$unique $(LISP) GTAGS: here=`CDPATH=: && cd $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @for file in $(DISTFILES); do \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ $(mkinstalldirs) "$(distdir)/$$dir"; \ fi; \ if test -d $$d/$$file; then \ cp -pR $$d/$$file $(distdir) \ || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) installdirs: installdirs-recursive installdirs-am: $(mkinstalldirs) $(DESTDIR)$(bindir) install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-recursive distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-exec-am: install-binPROGRAMS install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ clean-binPROGRAMS clean-generic clean-recursive distclean \ distclean-compile distclean-depend distclean-generic \ distclean-recursive distclean-tags distdir dvi dvi-am \ dvi-recursive info info-am info-recursive install install-am \ install-binPROGRAMS install-data install-data-am \ install-data-recursive install-exec install-exec-am \ install-exec-recursive install-info install-info-am \ install-info-recursive install-man install-recursive \ install-strip installcheck installcheck-am installdirs \ installdirs-am installdirs-recursive maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-recursive \ tags tags-recursive uninstall uninstall-am \ uninstall-binPROGRAMS uninstall-info-am \ uninstall-info-recursive uninstall-recursive ctags: ctags *.[ch] # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: