# Makefile.in generated automatically by automake 1.5 from Makefile.am.
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# $Header: /pub/cvsroot/yencode/src/Makefile.am,v 1.29 2002/03/16 05:29:14 bboy Exp $
SHELL = /bin/sh
srcdir = .
top_srcdir = ..
prefix =
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
pkgdatadir = $(datadir)/yencode
pkglibdir = $(libdir)/yencode
pkgincludedir = $(includedir)/yencode
top_builddir = ..
ACLOCAL = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run aclocal
AUTOCONF = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run autoconf
AUTOMAKE = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run automake
AUTOHEADER = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run autoheader
INSTALL = /usr/bin/install -c -o root -g wheel
INSTALL_PROGRAM = install -s -o root -g wheel -m 555
INSTALL_DATA = install -o root -g wheel -m 444
INSTALL_SCRIPT = install -o root -g wheel -m 555
INSTALL_HEADER = $(INSTALL_DATA)
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i386-unknown-gnu
host_triplet = i386-unknown-gnu
AMTAR = ${SHELL} /mnt/gmirror/ports/news/yencode/work/yencode-0.46/missing --run tar
AWK = mawk
BUILD_INCLUDED_LIBINTL = no
CATALOGS =
CATOBJEXT = .gmo
CC = cc
DATADIRNAME = share
DEPDIR = .deps
EXEEXT =
GENCAT = gencat
GLIBC21 = no
GMOFILES =
GMSGFMT = /usr/local/bin/msgfmt
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INSTOBJEXT = .mo
INTLBISON = bison
INTLLIBS = -lintl -liconv
INTLOBJS =
INTL_LIBTOOL_SUFFIX_PREFIX =
LIBICONV = -liconv
LN_S = ln -s
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/local/bin/msgfmt
OBJEXT =
PACKAGE = yencode
POFILES =
POSUB = po
RANLIB = ranlib
USE_INCLUDED_LIBINTL = no
USE_NLS = yes
VERSION = 0.46
am__include = include
am__quote =
install_sh = /mnt/gmirror/ports/news/yencode/work/yencode-0.46/install-sh
bin_PROGRAMS = yencode ydecode
SUBDIRS = ypost
EXTRA_DIST =
localedir = $(datadir)/locale
INCLUDES = -I../lib -I../intl
DEFS = -DLOCALEDIR=\"$(localedir)\" -DSYSTYPE=\"$(host_triplet)\"
LDADD = ../lib/libmisc.a -lintl -liconv
AM_CFLAGS = -Wall -Wno-unused
sharedsrc = y.h crc.c crc.h file.c file.h output.c output.h
yencode_SOURCES = yencode.c $(sharedsrc) support.c support.h
ydecode_SOURCES = ydecode.c $(sharedsrc)
subdir = src
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
bin_PROGRAMS = yencode$(EXEEXT) ydecode$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS)
am_ydecode_OBJECTS = ydecode.$(OBJEXT) crc.$(OBJEXT) file.$(OBJEXT) \
output.$(OBJEXT)
ydecode_OBJECTS = $(am_ydecode_OBJECTS)
ydecode_LDADD = $(LDADD)
ydecode_DEPENDENCIES = ../lib/libmisc.a
ydecode_LDFLAGS =
am_yencode_OBJECTS = yencode.$(OBJEXT) crc.$(OBJEXT) file.$(OBJEXT) \
output.$(OBJEXT) support.$(OBJEXT)
yencode_OBJECTS = $(am_yencode_OBJECTS)
yencode_LDADD = $(LDADD)
yencode_DEPENDENCIES = ../lib/libmisc.a
yencode_LDFLAGS =
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
CPPFLAGS = -I/usr/local/include
LDFLAGS = -L/usr/local/lib
LIBS =
depcomp = $(SHELL) $(top_srcdir)/depcomp
DEP_FILES = $(DEPDIR)/crc.Po $(DEPDIR)/file.Po \
$(DEPDIR)/output.Po $(DEPDIR)/support.Po \
$(DEPDIR)/ydecode.Po $(DEPDIR)/yencode.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
CFLAGS = -fno-common
DIST_SOURCES = $(ydecode_SOURCES) $(yencode_SOURCES)
RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
uninstall-info-recursive all-recursive install-data-recursive \
install-exec-recursive installdirs-recursive install-recursive \
uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = Makefile.am Makefile.in TODO
DIST_SUBDIRS = $(SUBDIRS)
SOURCES = $(ydecode_SOURCES) $(yencode_SOURCES)
all: all-recursive
.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu src/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
; then \
f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
rm -f $(DESTDIR)$(bindir)/$$f; \
done
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
ydecode$(EXEEXT): $(ydecode_OBJECTS) $(ydecode_DEPENDENCIES)
@rm -f ydecode$(EXEEXT)
$(LINK) $(ydecode_LDFLAGS) $(ydecode_OBJECTS) $(ydecode_LDADD) $(LIBS)
yencode$(EXEEXT): $(yencode_OBJECTS) $(yencode_DEPENDENCIES)
@rm -f yencode$(EXEEXT)
$(LINK) $(yencode_LDFLAGS) $(yencode_OBJECTS) $(yencode_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
include $(DEPDIR)/crc.Po
include $(DEPDIR)/file.Po
include $(DEPDIR)/output.Po
include $(DEPDIR)/support.Po
include $(DEPDIR)/ydecode.Po
include $(DEPDIR)/yencode.Po
distclean-depend:
-rm -rf $(DEPDIR)
.c.o:
source='$<' object='$@' libtool=no \
depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
$(CCDEPMODE) $(depcomp) \
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
.c.obj:
source='$<' object='$@' libtool=no \
depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
$(CCDEPMODE) $(depcomp) \
$(COMPILE) -c `cygpath -w $<`
CCDEPMODE = depmode=gcc3
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| etags $(ETAGS_ARGS) $$tags $$unique $(LISP)
GTAGS:
here=`CDPATH=: && cd $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
$(mkinstalldirs) "$(distdir)/$$dir"; \
fi; \
if test -d $$d/$$file; then \
cp -pR $$d/$$file $(distdir) \
|| exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" \
distdir=../$(distdir)/$$subdir \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile $(PROGRAMS)
installdirs: installdirs-recursive
installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(bindir)
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
distclean: distclean-recursive
distclean-am: clean-am distclean-compile distclean-depend \
distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
info: info-recursive
info-am:
install-data-am:
install-exec-am: install-binPROGRAMS
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic
uninstall-am: uninstall-binPROGRAMS uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
clean-binPROGRAMS clean-generic clean-recursive distclean \
distclean-compile distclean-depend distclean-generic \
distclean-recursive distclean-tags distdir dvi dvi-am \
dvi-recursive info info-am info-recursive install install-am \
install-binPROGRAMS install-data install-data-am \
install-data-recursive install-exec install-exec-am \
install-exec-recursive install-info install-info-am \
install-info-recursive install-man install-recursive \
install-strip installcheck installcheck-am installdirs \
installdirs-am installdirs-recursive maintainer-clean \
maintainer-clean-generic maintainer-clean-recursive mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-recursive \
tags tags-recursive uninstall uninstall-am \
uninstall-binPROGRAMS uninstall-info-am \
uninstall-info-recursive uninstall-recursive
ctags:
ctags *.[ch]
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1