## HDF5-Fortran test/Makefile(.in)
##
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html.  COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page.  It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
##
top_srcdir=@top_srcdir@/..
top_builddir=../..
srcdir=@srcdir@
@COMMENCE@

hdf5_builddir=$(top_builddir)/src

## Replace building FC with the just installed h5fc
FC=$(bindir)/h5fc
FC_PP=$(bindir)/h5pfc

## These are the programs that `make all' or `make tests' will build and which
## `make check' will run. List them in the order they should be run.
## Parallel programs are dependent on if parallel build is true.
@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROGS_PARA=ph5example
TEST_PROGS=dsetexample fileexample rwdsetexample attrexample groupexample	\
	   grpsexample grpdsetexample hyperslab selectele grpit refobjexample	\
	   refregexample mountexample compound
TEST_SCRIPTS=testh5fc.sh

## These are the files that `make clean' (and derivatives) will remove from
## this directory.
CLEAN=*.h5
DISTCLEAN=testh5fc.sh

## List all source files here. The list of object files will be
## created by replacing the `.f90' with a `.o'. This list is necessary
## for building automatic dependencies.
## Parallel programs are dependent on if parallel build is true.
@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_SRC_PARA=ph5example.f90
TEST_SRC=dsetexample.f90 fileexample.f90 rwdsetexample.f90 attrexample.f90	\
	 groupexample.f90 grpsexample.f90 grpdsetexample.f90 hyperslab.f90	\
	 selectele.f90 grpit.f90 refobjexample.f90 refregexample.f90		\
	 mountexample.f90 compound.f90
TEST_OBJ=$(TEST_SRC:.f90=.lo)

EXAMPLE_PROGS=$(TEST_SRC) $(TEST_SRC_PARA)

## How to build the programs... they all depend on the installed h5fc.
$(TEST_PROGS):
dsetexample: $(srcdir)/dsetexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

fileexample: $(srcdir)/fileexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

rwdsetexample: $(srcdir)/rwdsetexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

attrexample: $(srcdir)/attrexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

groupexample: $(srcdir)/groupexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

grpsexample: $(srcdir)/grpsexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

grpdsetexample: $(srcdir)/grpdsetexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

hyperslab: $(srcdir)/hyperslab.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

selectele: $(srcdir)/selectele.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

grpit: $(srcdir)/grpit.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

refobjexample: $(srcdir)/refobjexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

refregexample: $(srcdir)/refregexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

mountexample: $(srcdir)/mountexample.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

compound: $(srcdir)/compound.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

ph5example: $(srcdir)/ph5example.f90
	@if test "X$(PARALLEL)" = "Xno"; then				\
	  echo $(FC) -o $@ $(srcdir)/$@.f90;				\
	  $(FC) -o $@ $(srcdir)/$@.f90;					\
	else								\
	  echo $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	  $(FC_PP) -o $@ $(srcdir)/$@.f90;				\
	fi

@CONCLUDE@