## Tools HDF5 Makefile(.in)
##
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
##
top_srcdir=..
top_builddir=..
srcdir=.
##------------------------------------------------------------ -*- makefile -*-
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
##
##
## The following section of this makefile comes from the
## `./config/commence' file which was generated with config.status
## from `./config/commence.in'.
##-----------------------------------------------------------------------------
## Things that Make needs
.SUFFIXES:
.SUFFIXES: .c .o .lo
## Directories to search
VPATH=$(srcdir):$(top_builddir)/src:$(top_srcdir)/src
## Programs
SHELL=/bin/sh
CC=cc
## H5_CPPFLAGS and H5_CFLAGS are used for extra flags used to build HDF5
## (flags that don't need to be included in h5cc, for instance).
CFLAGS= -fno-common
CPPFLAGS=-UH5_DEBUG_API -DNDEBUG
H5_CFLAGS= -fno-common
H5_CPPFLAGS=-UH5_DEBUG_API -DNDEBUG
LDFLAGS=
ROOT=/mnt/gmirror/ports/science/hdf5/work/hdf5-1.6.6
LIBS=-lz -lm
AR=ar
RANLIB=ranlib
PERL=
RM=rm -f
CP=cp
INSTALL=/usr/bin/install -c -o root -g wheel
INSTALL_PROGRAM=install -o root -g wheel -m 555
INSTALL_DATA=install -o root -g wheel -m 444
PARALLEL=no
RUNSERIAL=
RUNPARALLEL=
RUNTEST=$(RUNSERIAL)
TIME=time
TRACE=:
## Installation points
prefix=
exec_prefix=${prefix}
bindir=${exec_prefix}/bin
libdir=${exec_prefix}/lib
includedir=${prefix}/include
docdir=${prefix}/share
PUB_LIB=$(LIB)
## Shared libraries
LT_STATIC_EXEC=
DYNAMIC_DIRS=
LT=$(top_builddir)/libtool
LT_COMPILE=$(LT) --mode=compile $(CC)
LT_LINK_LIB=$(LT) --mode=link $(CC) -rpath $(libdir) $(DYNAMIC_DIRS)
LT_LINK_EXE=$(LT) --mode=link $(CC) $(LT_STATIC_EXEC) -dlopen self -rpath $(libdir) $(DYNAMIC_DIRS)
LT_RUN=$(LT) --mode=execute
LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM)
LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA)
LT_UNINSTALL=$(LT) --mode=uninstall $(RM)
## Optional variables. We must declare them here because Irix pmake
## complains if it sees a reference to a variable which has never been
## defined. The main makefile is free to redefine these to something else.
DOCDIR=$(docdir)/doc/hdf5
SUBDOCDIR=
EXAMPLEDIR=$(docdir)/examples/hdf5/c
LIB=
LIB_SRC=
LIB_OBJ=
PUB_HDR=
PUB_PROGS=
PUB_DOCS=
PUB_SUBDOCS=
PROGS=
TEST_PROGS=
PRIV_PROGS=
TEST_PROGS_PARA=
TEST_FLAGS=
TEST_SCRIPTS=
TEST_SCRIPTS_PARA=
AUX_LIB=
EXAMPLE_PROGS=
SUBDIRS=
LIBHDF5=
## The default is to build the library and/or programs. We must build
## them sequentially.
all:
$(MAKE) lib
$(MAKE) progs
$(MAKE) tests
## The following rules insure that the Makefile is up-to-date by rerunning
## various autoconf components (although not all versions of make assume
## that the makefile is implicitly a target). We use time stamp files to
## keep track of the most recent update of H5config.h.in and H5config.h
## because autoheader and config.status don't update the modification time
## if the contents don't change.
## Invoke it by "gmake reconfigure".
##
## Graphically, the dependencies are:
##
## configure.in
## | |
## +-----------------+ +------------+
## | |
## stamp1 configure
## (H5config.h.in) |
## | | |
## | +---------------+ +-----------+
## | | |
## | config.status
## | |
## | +------------------+
## | |
## stamp2
## (H5config.h) Makefile.in et al
## | |
## +------------------+ +-----------+
## | |
## Makefile
##
## A side effect of updating stamp1 is to generate H5config.h.in and a
## side effect of updating stamp2 is to generate H5config.h. When using
## a version of make that doesn't treat the makefile as the initial target
## the user may want to occassionally type `make Makefile' in any source
## directory.
## The `Makefile' target has been renamed to `reconfigure' so that the
## autoconf and make depend processes do not start up automatically.
## One must do `make reconfigure' explicitedly to start the process.
## (When srcdir is used and if more than one machines are running,
## this automatic Makefile/autoconf can get things unstable.)
##
STAMP1=$(top_builddir)/config/stamp1
STAMP2=$(top_builddir)/config/stamp2
MAKEFILE_PARTS=$(srcdir)/Makefile.in \
$(top_srcdir)/config/commence.in \
$(top_srcdir)/config/conclude.in \
$(top_srcdir)/config/depend1.in \
$(top_srcdir)/config/depend2.in \
$(top_srcdir)/config/depend3.in \
$(top_srcdir)/config/depend4.in \
$(top_srcdir)/config/dependN.in
$(STAMP1): $(top_srcdir)/configure.in
touch $(STAMP1)
-cd $(top_srcdir); autoheader
$(STAMP2): $(STAMP1) $(top_builddir)/config.status
touch $(STAMP2)
-cd $(top_builddir); \
CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
$(top_srcdir)/configure: $(top_srcdir)/configure.in
-cd $(top_srcdir); autoconf
$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-cd $(top_builddir); ./config.status --recheck
# rerun the autoconf process if any configure components have changed.
reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-cd $(top_builddir); CONFIG_HEADERS= ./config.status
@for sub in dummy; do \
if test $$sub != dummy; then \
-cd $$sub; $(MAKE) reconfigure; \
fi; \
done;
## make help target
help:
$(top_srcdir)/bin/makehelp
##-----------------------------------------------------------------------------
## The following section of this makefile comes from the middle of
## `Makefile.in' from this directory. It was generated by running
## `config.status'.
##-----------------------------------------------------------------------------
## All subdirectories except for the ``lib'' subdirectory.
##
SUBDIRS=h5dump h5diff h5ls misc h5import h5repack h5jam
## Add include directory to the C preprocessor flags, add -lh5tools and
## -lhdf5 to the list of libraries.
##
CPPFLAGS=-I. -I$(srcdir) -I$(top_builddir)/src -I$(top_srcdir)/src \
-I$(top_srcdir)/tools/lib -UH5_DEBUG_API -DNDEBUG
## Test programs and scripts.
##
TEST_PROGS=
TEST_SCRIPTS=
## These are our main targets: library and tools.
##
LIBTOOLS=$(top_builddir)/tools/lib/libh5tools.la
LIBHDF5=$(top_builddir)/src/libhdf5.la
PROGS=$(PUB_PROGS) $(TEST_PROGS)
## Source and object files for the tests
##
TEST_SRC=
TEST_OBJ=$(TEST_SRC:.c=.lo)
lib ::
(cd lib && $(MAKE) $@) || exit 1;
progs: $(LIBTOOLS) $(LIBHDF5)
@set -x; for d in X $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
dep depend:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
check check-s check-p tests test _test: $(PROGS)
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
uninstall:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
install:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
install-doc:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@); \
fi; \
done
.PHONY: all lib progs test _test install uninstall clean \
mostlyclean distclean maintainer-clean
clean mostlyclean:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@); \
fi; \
done
distclean:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@); \
fi; \
done
-$(RM) Makefile
maintainer-clean:
@set -x; for d in X lib $(SUBDIRS); do \
if test $$d != X; then \
(cd $$d && $(MAKE) $@); \
fi; \
done
syntax highlighted by Code2HTML, v. 0.9.1