##
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
##
## HDF5 Library Makefile(.in)
##
top_srcdir=../..
top_builddir=../..
srcdir=.
##------------------------------------------------------------ -*- makefile -*-
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
##
##
## The following section of this makefile comes from the
## `./config/commence' file which was generated with config.status
## from `./config/commence.in'.
##-----------------------------------------------------------------------------
## Things that Make needs
.SUFFIXES:
.SUFFIXES: .c .o .lo
## Directories to search
VPATH=$(srcdir):$(top_builddir)/src:$(top_srcdir)/src
## Programs
SHELL=/bin/sh
CC=cc
## H5_CPPFLAGS and H5_CFLAGS are used for extra flags used to build HDF5
## (flags that don't need to be included in h5cc, for instance).
CFLAGS= -fno-common
CPPFLAGS=-UH5_DEBUG_API -DNDEBUG
H5_CFLAGS= -fno-common
H5_CPPFLAGS=-UH5_DEBUG_API -DNDEBUG
LDFLAGS=
ROOT=/mnt/gmirror/ports/science/hdf5/work/hdf5-1.6.6
LIBS=-lz -lm
AR=ar
RANLIB=ranlib
PERL=
RM=rm -f
CP=cp
INSTALL=/usr/bin/install -c -o root -g wheel
INSTALL_PROGRAM=install -o root -g wheel -m 555
INSTALL_DATA=install -o root -g wheel -m 444
PARALLEL=no
RUNSERIAL=
RUNPARALLEL=
RUNTEST=$(RUNSERIAL)
TIME=time
TRACE=:
## Installation points
prefix=
exec_prefix=${prefix}
bindir=${exec_prefix}/bin
libdir=${exec_prefix}/lib
includedir=${prefix}/include
docdir=${prefix}/share
PUB_LIB=$(LIB)
## Shared libraries
LT_STATIC_EXEC=
DYNAMIC_DIRS=
LT=$(top_builddir)/libtool
LT_COMPILE=$(LT) --mode=compile $(CC)
LT_LINK_LIB=$(LT) --mode=link $(CC) -rpath $(libdir) $(DYNAMIC_DIRS)
LT_LINK_EXE=$(LT) --mode=link $(CC) $(LT_STATIC_EXEC) -dlopen self -rpath $(libdir) $(DYNAMIC_DIRS)
LT_RUN=$(LT) --mode=execute
LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM)
LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA)
LT_UNINSTALL=$(LT) --mode=uninstall $(RM)
## Optional variables. We must declare them here because Irix pmake
## complains if it sees a reference to a variable which has never been
## defined. The main makefile is free to redefine these to something else.
DOCDIR=$(docdir)/doc/hdf5
SUBDOCDIR=
EXAMPLEDIR=$(docdir)/examples/hdf5/c
LIB=
LIB_SRC=
LIB_OBJ=
PUB_HDR=
PUB_PROGS=
PUB_DOCS=
PUB_SUBDOCS=
PROGS=
TEST_PROGS=
PRIV_PROGS=
TEST_PROGS_PARA=
TEST_FLAGS=
TEST_SCRIPTS=
TEST_SCRIPTS_PARA=
AUX_LIB=
EXAMPLE_PROGS=
SUBDIRS=
LIBHDF5=
## The default is to build the library and/or programs. We must build
## them sequentially.
all:
$(MAKE) lib
$(MAKE) progs
$(MAKE) tests
## The following rules insure that the Makefile is up-to-date by rerunning
## various autoconf components (although not all versions of make assume
## that the makefile is implicitly a target). We use time stamp files to
## keep track of the most recent update of H5config.h.in and H5config.h
## because autoheader and config.status don't update the modification time
## if the contents don't change.
## Invoke it by "gmake reconfigure".
##
## Graphically, the dependencies are:
##
## configure.in
## | |
## +-----------------+ +------------+
## | |
## stamp1 configure
## (H5config.h.in) |
## | | |
## | +---------------+ +-----------+
## | | |
## | config.status
## | |
## | +------------------+
## | |
## stamp2
## (H5config.h) Makefile.in et al
## | |
## +------------------+ +-----------+
## | |
## Makefile
##
## A side effect of updating stamp1 is to generate H5config.h.in and a
## side effect of updating stamp2 is to generate H5config.h. When using
## a version of make that doesn't treat the makefile as the initial target
## the user may want to occassionally type `make Makefile' in any source
## directory.
## The `Makefile' target has been renamed to `reconfigure' so that the
## autoconf and make depend processes do not start up automatically.
## One must do `make reconfigure' explicitedly to start the process.
## (When srcdir is used and if more than one machines are running,
## this automatic Makefile/autoconf can get things unstable.)
##
STAMP1=$(top_builddir)/config/stamp1
STAMP2=$(top_builddir)/config/stamp2
MAKEFILE_PARTS=$(srcdir)/Makefile.in \
$(top_srcdir)/config/commence.in \
$(top_srcdir)/config/conclude.in \
$(top_srcdir)/config/depend1.in \
$(top_srcdir)/config/depend2.in \
$(top_srcdir)/config/depend3.in \
$(top_srcdir)/config/depend4.in \
$(top_srcdir)/config/dependN.in
$(STAMP1): $(top_srcdir)/configure.in
touch $(STAMP1)
-cd $(top_srcdir); autoheader
$(STAMP2): $(STAMP1) $(top_builddir)/config.status
touch $(STAMP2)
-cd $(top_builddir); \
CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status
$(top_srcdir)/configure: $(top_srcdir)/configure.in
-cd $(top_srcdir); autoconf
$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1)
-cd $(top_builddir); ./config.status --recheck
# rerun the autoconf process if any configure components have changed.
reconfigure: $(MAKEFILE_PARTS) $(STAMP2)
-cd $(top_builddir); CONFIG_HEADERS= ./config.status
@for sub in dummy; do \
if test $$sub != dummy; then \
-cd $$sub; $(MAKE) reconfigure; \
fi; \
done;
## make help target
help:
$(top_srcdir)/bin/makehelp
##-----------------------------------------------------------------------------
## The following section of this makefile comes from the middle of
## `Makefile.in' from this directory. It was generated by running
## `config.status'.
##-----------------------------------------------------------------------------
## Add include directory to the C preprocessor flags, add -lh5tools and
## -lhdf5 to the list of libraries.
##
CPPFLAGS=-I. -I$(srcdir) -I$(top_builddir)/src -I$(top_srcdir)/src \
-I$(top_srcdir)/tools/lib -UH5_DEBUG_API -DNDEBUG
## Test programs and scripts.
##
TEST_PROGS=h5diffgentest
TEST_SCRIPTS=$(srcdir)/testh5diff.sh
## These are our main targets: library and tools.
##
LIBHDF5=$(top_builddir)/src/libhdf5.la
LIBTOOLS=../lib/libh5tools.la
PUB_PROGS=h5diff
PROGS=$(PUB_PROGS) $(TEST_PROGS)
## Source and object files for the library; do not install
##
LIB_SRC=
LIB_OBJ=$(LIB_SRC:.c=.lo)
PUB_LIB=
## Temporary files. *.h5 are generated by h5diff. They should
## copied to the testfiles/ directory if update is required.
MOSTLYCLEAN=*.h5
## Source and object files for programs...
##
PROG_SRC= h5diff_main.c h5diffgentest.c
PROG_OBJ=$(PROG_SRC:.c=.lo)
OBJS= h5diff_main.lo
TEST_OBJS=h5diffgentest.lo
PRIVATE_HDR=testh5diff.h
## Source and object files for the tests
##
TEST_SRC=
TEST_OBJ=$(TEST_SRC:.c=.lo)
## Programs have to be built before they can be tested!
##
check test _test: $(PROGS)
## How to build the programs...They all depend on the hdf5 library and
## the tools library compiled in this directory.
##
$(PROGS): $(LIBTOOLS) $(LIBHDF5)
h5diff: $(OBJS)
@$(LT_LINK_EXE) $(CFLAGS) -o $@ $(OBJS) $(LIBTOOLS) $(LIBHDF5) $(LDFLAGS) $(LIBS)
h5diffgentest: $(TEST_OBJS)
@$(LT_LINK_EXE) $(CFLAGS) -o $@ $(TEST_OBJS) $(LIBTOOLS) $(LIBHDF5) $(LDFLAGS) $(LIBS)
##------------------------------------------------------------ -*- makefile -*-
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
##
##
## The following section of this makefile comes from the
## `./config/conclude' file which was generated with config.status
## from `./config/conclude.in'.
##-----------------------------------------------------------------------------
## This is the target for the library described in the main body of the
## makefile.
##
lib: $(LIB)
$(LIB) __no_library__: $(LIB_OBJ)
@$(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS)
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d && $(MAKE) lib) || exit 1; \
fi; \
done
progs: $(LIB) $(PROGS)
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d && $(MAKE) progs) || exit 1; \
fi; \
done
## Build a tags file in this directory.
##
TAGS: $(LIB_SRC)
$(RM) $@
-etags $(LIB_SRC)
## Runs each test in order, passing $(TEST_FLAGS) to the program.
## Since tests are done in a shell loop, "make -i" does apply inside it.
## Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
## The timestamps give a rough idea how much time the tests use.
##
tests: $(TEST_PROGS) $(TEST_PROGS_PARA) $(TEST_SCRIPTS) $(LIB)
check test _test: tests
@echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="
$(MAKE) _check-s
$(MAKE) _check-p
@echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`==="
## serial tests
check-s: tests
@echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="
$(MAKE) _check-s
@echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`==="
## parallel tests
check-p: tests
@echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="
$(MAKE) _check-p
@echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`==="
## Actual execution of sequtial tests.
_check-s: tests
@for test in $(TEST_PROGS) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
echo "Testing $$test $(TEST_FLAGS)"; \
echo "============================"; \
srcdir="$(srcdir)" \
$(TIME) $(RUNTEST) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPTS) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
echo "Testing $$test $(TEST_FLAGS)"; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
$(TIME) /bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
## Actual execution of parallel tests.
_check-p: tests
@if test -n "$(TEST_PROGS_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROGS_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
echo "Testing $$test $(TEST_FLAGS)"; \
echo "============================"; \
srcdir="$(srcdir)" \
$(TIME) $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
@for test in $(TEST_SCRIPTS_PARA) dummy; do \
if test $$test != dummy; then \
echo "============================"; \
echo "Testing $$test $(TEST_FLAGS)"; \
echo "============================"; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
$(TIME) /bin/sh $$test $(TEST_FLAGS) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
break; \
echo ""; \
fi; \
done; \
test $$test = dummy || false
## Run test with different Virtual File Driver
check-vfd:
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
HDF5_DRIVER=$$vfd $(MAKE) check; \
fi; \
done
## Make installation directories directories if they don't exist.
##
$(libdir):
-$(top_srcdir)/bin/mkdirs $@
$(includedir):
-$(top_srcdir)/bin/mkdirs $@
$(bindir):
-$(top_srcdir)/bin/mkdirs $@
$(DOCDIR):
-$(top_srcdir)/bin/mkdirs $@
$(EXAMPLEDIR):
-$(top_srcdir)/bin/mkdirs $@
## Install the library, the public header files, and public programs.
##
install: $(AUX_LIB) $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir)
@for f in X $(PUB_LIB); do \
if test $$f != X; then \
($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1); \
fi; \
done
@if test -f libhdf5.settings; then \
(set -x; $(INSTALL_DATA) libhdf5.settings $(libdir)/. || exit 1); \
fi
@for f in X $(PUB_HDR); do \
if test $$f != X; then \
if test -f $$f; then \
(set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1); \
else \
(set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. || \
exit 1); \
fi; \
fi; \
done
@for f in X $(PUB_PROGS); do \
if test $$f != X; then \
if test "X$(PARALLEL)" != "Xno"; then \
if test $$f = "h5cc"; then \
($(LT_INSTALL_PROG) $$f $(bindir)/h5pcc || exit 1); \
elif test $$f = "h5fc"; then \
($(LT_INSTALL_PROG) $$f $(bindir)/h5pfc || exit 1); \
else \
($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1); \
fi; \
else \
($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1); \
fi; \
fi; \
done
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
install-examples: $(EXAMPLE_PROGS) $(EXAMPLEDIR)
@for f in X $(EXAMPLE_PROGS); do \
if test $$f != X; then \
(set -x; $(INSTALL_DATA) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);\
fi; \
done
uninstall-examples:
@if test -n "$(EXAMPLE_PROGS)"; then \
set -x; cd $(EXAMPLEDIR) && $(RM) $(EXAMPLE_PROGS); \
fi
## Install the documents.
##
install-doc: $(PUB_DOCS) $(DOCDIR)
@if test -n "$(DOCDIR)"; then \
if test -d "$(DOCDIR)"; then \
:; \
else \
mkdir $(DOCDIR) && chmod 755 $(DOCDIR); \
fi; \
fi
@if test -n "$(SUBDOCDIR)"; then \
if test -d "$(SUBDOCDIR)" ; then \
:; \
else \
mkdir $(SUBDOCDIR) && chmod 755 $(SUBDOCDIR); \
fi; \
fi
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
@for f in X $(PUB_DOCS); do \
if test $$f != X; then \
if test -f $$f; then \
(set -x; $(INSTALL_DATA) $$f $(DOCDIR)/. || exit 1); \
else \
(set -x; $(INSTALL_DATA) $(srcdir)/$$f $(DOCDIR)/. || \
exit 1); \
fi; \
fi; \
done
@for f in X $(PUB_SUBDOCS); do \
if test $$f != X; then \
if test -f $$f; then \
(set -x; $(INSTALL_DATA) $$f $(SUBDOCDIR)/. || exit 1); \
else \
(set -x; $(INSTALL_DATA) $(srcdir)/$$f $(SUBDOCDIR)/. || \
exit 1); \
fi; \
fi; \
done
## Removes those things that `make install' (would have) installed.
##
uninstall:
@for f in libhdf5.settings $(LIB); do \
$(LT_UNINSTALL) $(libdir)/$$f; \
done
@if test -n "$(PUB_HDR)"; then \
set -x; cd $(includedir) && $(RM) $(PUB_HDR); \
fi
@for f in X $(PUB_PROGS); do \
if test $$f != X; then \
$(LT_UNINSTALL) $(bindir)/$$f; \
fi; \
done
## Removes those things that `make install-doc' (would have) installed.
##
uninstall-doc:
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d && $(MAKE) $@) || exit 1; \
fi; \
done
@if test -n "$(PUB_DOCS)"; then \
set -x; cd $(DOCDIR) && $(RM) $(PUB_DOCS); \
fi
@if test -n "$(PUB_SUBDOCS)"; then \
set -x; cd $(DOCDIR) && $(RM) $(PUB_SUBDOCS); \
fi
## Removes temporary files without removing the final target files. That is,
## remove things like object files but not libraries or executables.
##
mostlyclean:
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d; $(MAKE) $@) || exit 1; \
fi; \
done
@if test -n "$(LIB_OBJ)"; then \
$(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o); \
fi
@if test -n "$(TEST_OBJ)"; then \
$(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o); \
fi
@if test -n "$(PROG_OBJ)" || test -n "$(MOSTLYCLEAN)"; then \
$(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN); \
fi
## Like `mostlyclean' except it also removes the final targets: things like
## libraries and executables. This target doesn't remove any file that
## is part of the HDF5 distribution.
##
clean: mostlyclean
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d; $(MAKE) $@) || exit 1; \
fi; \
done
@if test -n "$(LIB)" -o -n "$(TEST_PROGS)" -o -n "$(TEST_PROGS_PARA)" -o -n "$(PROGS)" -o -n "$(CLEAN)"; then \
$(RM) $(LIB) $(TEST_PROGS) $(TEST_PROGS_PARA) $(PROGS) $(CLEAN); \
fi;
-$(RM) -r .libs
## Like `clean' except it also removes files that were created by running
## configure. If you've unpacked the source and built HDF5 without creating
## any other files, then `make distclean' will leave only the files that were
## in the distribution.
##
distclean: clean
-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d; $(MAKE) $@) || exit 1; \
fi; \
done
@if test -f $(srcdir)/Makefile.in; then \
(set -x; $(RM) Makefile); \
fi
## Like `distclean' except it deletes all files that can be regenerated from
## the makefile, including those generated from autoheader and autoconf.
##
maintainer-clean: distclean
@for d in X $(SUBDIRS); do \
if test $$d != X; then \
(set -x; cd $$d; $(MAKE) $@) || exit 1; \
fi; \
done
-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out
## Implicit rules
##
.c.o:
$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
.c.lo:
@$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $<
##-----------------------------------------------------------------------------
## The following section of this makefile contains dependencies between the
## source files and the header files.
##-----------------------------------------------------------------------------
.PHONY: dep depend
dep depend: $(srcdir)/Dependencies
## -*- makefile -*-
##
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
## Since automatic dependencies are not being used, we attempt to include the
## `.distdep' file from the source tree. This file was automatically generated
## on some system that satisfies the above requirements.
.include <$(srcdir)/Dependencies>
syntax highlighted by Code2HTML, v. 0.9.1