#!/bin/sh
#
# Bacula interface to mtx autoloader
#
#  $Id: mtx-changer.Adic-Scalar-24 2805 2006-02-22 18:43:55Z kerns $
#
#  If you set in your Device resource
#
#  Changer Command = "path-to-this-script/mtx-changer %c %o %S %a %d"
#    you will have the following input to this script:
#
#  mtx-changer "changer-device" "command" "slot" "archive-device" "drive-index"
#                  $1              $2       $3        $4               $5
#
#  for example:
#
#  mtx-changer /dev/sg0 load 1 /dev/nst0 0 (on a Linux system)
#
#  If you need to an offline, refer to the drive as $4
#    e.g.   mt -f $4 offline
#
#  Many changers need an offline after the unload. Also many
#   changers need a sleep 60 after the mtx load.
#
#  N.B. If you change the script, take care to return either
#   the mtx exit code or a 0. If the script exits with a non-zero
#   exit code, Bacula will assume the request failed.
#

MTX=/usr/sbin/mtx

if test $# -lt 2 ; then
  echo "usage: mtx-changer ctl-device command slot archive-device drive"
  echo "  Insufficient number of arguments arguments given."
  echo "  Mimimum usage is first two arguments ..."
  exit 1
fi

# Setup arguments
ctl=$1
cmd="$2"
slot=$3
device=$4
# If drive not given, default to 0
if test $# = 5 ; then
  drive=$5
else
  drive=0
fi

${MTX} -f $1 inventory

#
# Check for special cases where only 2 arguments are needed,
#  all others are a minimum of 3
case $cmd in
   loaded)
     ;;
   unload)
     ;;
   list)
     ;;
   slots)
     ;;
   *)
     if test $# -lt 3; then
        echo "usage: mtx-changer ctl-device command slot archive-device drive"
        echo "  Insufficient number of arguments arguments given."
        echo "  Mimimum usage is first three arguments ..."
        exit 1
     fi
     ;;
esac


case $cmd in
   unload)
#     echo "Doing mtx -f $ctl unload $slot $drive"
#
# enable the following line if you need to eject the cartridge
#     mt -f $device offline
      if test x$slot = x; then
         ${MTX} -f $ctl unload
      else
         ${MTX} -f $ctl unload $slot $drive
      fi
      ;;

   load)
#     echo "Doing mtx -f $ctl load $slot $drive"
      ${MTX} -f $ctl load $slot $drive
      rtn=$?
#
# Increase the sleep time if you have a slow device
      sleep 15
      exit $rtn
      ;;

   list)
#     echo "Requested list"
      ${MTX} -f $ctl status | grep " *Storage Element [0-9]*:.*Full" | awk '{print $3 $4}' | sed "s/Full *\(:VolumeTag=\)*//"
      ;;

   loaded)
      ${MTX} -f $ctl status >/tmp/mtx.$$
      rtn=$?
      cat /tmp/mtx.$$ | grep "^Data Transfer Element $drive:Full" | awk '{print $7}'
      cat /tmp/mtx.$$ | grep "^Data Transfer Element $drive:Empty" | awk '{print 0}'
      rm -f /tmp/mtx.$$
      exit $rtn
      ;;

   slots)
#     echo "Request slots"
      ${MTX} -f $ctl status | grep " *Storage Changer" | awk '{print $5}'
      ;;
esac