/*
Bacula® - The Network Backup Solution
Copyright (C) 2000-2007 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
modify it under the terms of version two of the GNU General Public
License as published by the Free Software Foundation and included
in the file LICENSE.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
Bacula® is a registered trademark of John Walker.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
*/
/*
* Subroutines to handle waiting for operator intervention
* or waiting for a Device to be released
*
* Code for wait_for_sysop() pulled from askdir.c
*
* Kern Sibbald, March 2005
*
* Version $Id: wait.c 5840 2007-11-04 08:53:17Z kerns $
*/
#include "bacula.h" /* pull in global headers */
#include "stored.h" /* pull in Storage Deamon headers */
const int dbglvl = 400;
/*
* Wait for SysOp to mount a tape on a specific device
*
* Returns: W_ERROR, W_TIMEOUT, W_POLL, W_MOUNT, or W_WAKE
*/
int wait_for_sysop(DCR *dcr)
{
struct timeval tv;
struct timezone tz;
struct timespec timeout;
time_t last_heartbeat = 0;
time_t first_start = time(NULL);
int stat = 0;
int add_wait;
bool unmounted;
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
dev->dlock();
Dmsg1(dbglvl, "Enter blocked=%s\n", dev->print_blocked());
unmounted = is_device_unmounted(dev);
dev->poll = false;
/*
* Wait requested time (dev->rem_wait_sec). However, we also wake up every
* HB_TIME seconds and send a heartbeat to the FD and the Director
* to keep stateful firewalls from closing them down while waiting
* for the operator.
*/
add_wait = dev->rem_wait_sec;
if (me->heartbeat_interval && add_wait > me->heartbeat_interval) {
add_wait = me->heartbeat_interval;
}
/* If the user did not unmount the tape and we are polling, ensure
* that we poll at the correct interval.
*/
if (!unmounted && dev->vol_poll_interval && add_wait > dev->vol_poll_interval) {
add_wait = dev->vol_poll_interval;
}
if (!unmounted) {
Dmsg1(dbglvl, "blocked=%s\n", dev->print_blocked());
dev->dev_prev_blocked = dev->blocked();
dev->set_blocked(BST_WAITING_FOR_SYSOP); /* indicate waiting for mount */
}
for ( ; !job_canceled(jcr); ) {
time_t now, start, total_waited;
gettimeofday(&tv, &tz);
timeout.tv_nsec = tv.tv_usec * 1000;
timeout.tv_sec = tv.tv_sec + add_wait;
Dmsg4(dbglvl, "I'm going to sleep on device %s. HB=%d rem_wait=%d add_wait=%d\n",
dev->print_name(), (int)me->heartbeat_interval, dev->rem_wait_sec, add_wait);
start = time(NULL);
/* Wait required time */
stat = pthread_cond_timedwait(&dev->wait_next_vol, &dev->m_mutex, &timeout);
Dmsg2(dbglvl, "Wokeup from sleep on device stat=%d blocked=%s\n", stat,
dev->print_blocked());
now = time(NULL);
total_waited = now - first_start;
dev->rem_wait_sec -= (now - start);
/* Note, this always triggers the first time. We want that. */
if (me->heartbeat_interval) {
if (now - last_heartbeat >= me->heartbeat_interval) {
/* send heartbeats */
if (jcr->file_bsock) {
jcr->file_bsock->signal(BNET_HEARTBEAT);
Dmsg0(dbglvl, "Send heartbeat to FD.\n");
}
if (jcr->dir_bsock) {
jcr->dir_bsock->signal(BNET_HEARTBEAT);
}
last_heartbeat = now;
}
}
if (stat == EINVAL) {
berrno be;
Jmsg1(jcr, M_FATAL, 0, _("pthread timedwait error. ERR=%s\n"), be.bstrerror(stat));
stat = W_ERROR; /* error */
break;
}
if (dev->rem_wait_sec <= 0) { /* on exceeding wait time return */
Dmsg0(dbglvl, "Exceed wait time.\n");
stat = W_TIMEOUT;
break;
}
/*
* Check if user unmounted the device while we were waiting
*/
unmounted = is_device_unmounted(dev);
if (!unmounted && dev->vol_poll_interval &&
(total_waited >= dev->vol_poll_interval)) {
Dmsg1(dbglvl, "poll return in wait blocked=%s\n", dev->print_blocked());
dev->poll = true; /* returning a poll event */
stat = W_POLL;
break;
}
/*
* Check if user mounted the device while we were waiting
*/
if (dev->blocked() == BST_MOUNT) { /* mount request ? */
Dmsg0(dbglvl, "Mounted return.\n");
stat = W_MOUNT;
break;
}
/*
* If we did not timeout, then some event happened, so
* return to check if state changed.
*/
if (stat != ETIMEDOUT) {
berrno be;
Dmsg2(dbglvl, "Wake return. stat=%d. ERR=%s\n", stat, be.bstrerror(stat));
stat = W_WAKE; /* someone woke us */
break;
}
/*
* At this point, we know we woke up because of a timeout,
* that was due to a heartbeat, because any other reason would
* have caused us to return, so update the wait counters and continue.
*/
add_wait = dev->rem_wait_sec;
if (me->heartbeat_interval && add_wait > me->heartbeat_interval) {
add_wait = me->heartbeat_interval;
}
/* If the user did not unmount the tape and we are polling, ensure
* that we poll at the correct interval.
*/
if (!unmounted && dev->vol_poll_interval &&
add_wait > dev->vol_poll_interval - total_waited) {
add_wait = dev->vol_poll_interval - total_waited;
}
if (add_wait < 0) {
add_wait = 0;
}
}
if (!unmounted) {
dev->set_blocked(dev->dev_prev_blocked); /* restore entry state */
Dmsg1(dbglvl, "set %s\n", dev->print_blocked());
}
Dmsg1(dbglvl, "Exit blocked=%s\n", dev->print_blocked());
dev->dunlock();
return stat;
}
/*
* Wait for any device to be released, then we return, so
* higher level code can rescan possible devices. Since there
* could be a job waiting for a drive to free up, we wait a maximum
* of 1 minute then retry just in case a broadcast was lost, and
* we return to rescan the devices.
*
* Returns: true if a device has changed state
* false if the total wait time has expired.
*/
bool wait_for_device(JCR *jcr, int &retries)
{
struct timeval tv;
struct timezone tz;
struct timespec timeout;
int stat = 0;
bool ok = true;
const int max_wait_time = 1 * 60; /* wait 1 minute */
char ed1[50];
Dmsg0(dbglvl, "Enter wait_for_device\n");
P(device_release_mutex);
if (++retries % 5 == 0) {
/* Print message every 5 minutes */
Jmsg(jcr, M_MOUNT, 0, _("JobId=%s, Job %s waiting to reserve a device.\n"),
edit_uint64(jcr->JobId, ed1), jcr->Job);
}
gettimeofday(&tv, &tz);
timeout.tv_nsec = tv.tv_usec * 1000;
timeout.tv_sec = tv.tv_sec + max_wait_time;
Dmsg0(dbglvl, "Going to wait for a device.\n");
/* Wait required time */
stat = pthread_cond_timedwait(&wait_device_release, &device_release_mutex, &timeout);
Dmsg1(dbglvl, "Wokeup from sleep on device stat=%d\n", stat);
V(device_release_mutex);
Dmsg1(dbglvl, "Return from wait_device ok=%d\n", ok);
return ok;
}
#ifdef xxx
/*
* The jcr timers are used for waiting on any device *
* Returns: true if time doubled
* false if max time expired
*/
static bool double_jcr_wait_time(JCR *jcr)
{
jcr->wait_sec *= 2; /* double wait time */
if (jcr->wait_sec > jcr->max_wait) { /* but not longer than maxtime */
jcr->wait_sec = jcr->max_wait;
}
jcr->num_wait++;
jcr->rem_wait_sec = jcr->wait_sec;
if (jcr->num_wait >= jcr->max_num_wait) {
return false;
}
return true;
}
#endif
syntax highlighted by Code2HTML, v. 0.9.1