NOTE

       This  man  page  only  documents  the hardware-specific features of the
       safenet driver.  For information about the  core  driver,  see  nutups-
       drv(8).

SUPPORTED HARDWARE

       This  driver supports UPS equipment which can be controlled via SafeNet
       v1.0 for Windows (serial interface only).

EXTRA ARGUMENTS

       This  driver  supports  the  following   optional   settings   in   the
       ups.conf(5):


       manufacturer=value
              Autodetection  of  this  parameter  is  not possible yet (and it
              probably never will  be).  Therefor  this  user  defined  string
              accepts any name. The default is unknown.


       modelname=value
              Like manufacturer above. The default is unknown.


       serialnumber=value
              Like manufacturer above. The default is unknown.

UPSCMD

       test.battery.start - Start UPS self test

       test.battery.stop - Cancel UPS self test

       test.failure.start - Start simulated power failure

       test.failure.stop - Cancel simulated power failure

       beeper.on - Enable UPS beeper

       beeper.off - Disable UPS beeper

       shutdown.return - Shut down in 1 second and wait for power to return

       shutdown.reboot - Shut down in 1 seconds and reboot after 1 minute

       shutdown.reboot.graceful  -  Shut down in 20 seconds and reboot after 1
       minute

AUTHOR