NOTE

       This  man page only documents the hardware-specific features of the the
       victronups driver.  For information about the core driver, see  nutups-
       drv(8).

SUPPORTED HARDWARE

       victronups should recognize all Victron models that use a serial proto-
       col at 1200 bps.  These include Match Lite, Match and the NetUps  line.

       The  Match  Lite  line may only report a handful of variables.  This is
       usually not a bug - they just don't support anything else.

CABLING

       If your Victron cable is broken or missing, use this diagram to build a
       clone:

       docs/cables/victron.txt

EXTRA ARGUMENTS

       This driver supports the following optional setting in the ups.conf(5):


       modelname=<name>
              Set model name


       usd=delay
              Set delay before shutdown on UPS

BUGS

       The protocol for this UPS is not officially documented.

AUTHOR

       Radek      Benedikt      <benedikt@lphard.cz>,      Daniel      Prynych
       <Daniel.Prynych@hornet.cz

SEE ALSO

   The core driver:
       nutupsdrv(8)


   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/