'\" '\" Copyright 1991-1997 by Bell Labs Innovations for Lucent Technologies. '\" '\" Permission to use, copy, modify, and distribute this software and its '\" documentation for any purpose and without fee is hereby granted, provided '\" that the above copyright notice appear in all copies and that both that the '\" copyright notice and warranty disclaimer appear in supporting documentation, '\" and that the names of Lucent Technologies any of their entities not be used '\" in advertising or publicity pertaining to distribution of the software '\" without specific, written prior permission. '\" '\" Lucent Technologies disclaims all warranties with regard to this software, '\" including all implied warranties of merchantability and fitness. In no event '\" shall Lucent Technologies be liable for any special, indirect or '\" consequential damages or any damages whatsoever resulting from loss of use, '\" data or profits, whether in an action of contract, negligence or other '\" tortuous action, arising out of or in connection with the use or performance '\" of this software. '\" '\" Busy command created by George Howlett. '\" .so man.macros .TH busy n BLT_VERSION BLT "BLT Built-In Commands" .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME busy \- Make Tk widgets busy, temporarily blocking user interactions. .SH SYNOPSIS \fBbusy hold \fIwindow\fR ?\fIoption value\fR?... .sp \fBbusy release \fIwindow\fR ?\fIwindow\fR?... .sp \fBbusy configure \fIwindow\fR ?\fIoption value\fR?... .sp \fBbusy forget \fIwindow\fR ?\fIwindow\fR?... .sp \fBbusy isbusy \fR?\fIpattern\fR? .sp \fBbusy names \fR?\fIpattern\fR? .sp \fBbusy status \fIwindow\fR .BE .SH DESCRIPTION .PP The \fBbusy\fR command provides a simple means to block keyboard, button, and pointer events from Tk widgets, while overriding the widget's cursor with a configurable busy cursor. .SH INTRODUCTION .PP There are many times in applications where you want to temporarily restrict what actions the user can take. For example, an application could have a "run" button that when pressed causes some processing to occur. But while the application is busy processing, you probably don't want the the user to be able to click the "run" button again. You may also want restrict the user from other tasks such as clicking a "print" button. .PP The \fBbusy\fR command lets you make Tk widgets busy. This means that user interactions such as button clicks, moving the mouse, typing at the keyboard, etc. are ignored by the widget. You can set a special cursor (like a watch) that overrides the widget's normal cursor, providing feedback that the application (widget) is temporarily busy. .PP When a widget is made busy, the widget and all of its descendents will ignore events. It's easy to make an entire panel of widgets busy. You can simply make the toplevel widget (such as ".") busy. This is easier and far much more efficient than recursively traversing the widget hierarchy, disabling each widget and re-configuring its cursor. .PP Often, the busy command can be used instead of Tk's \fBgrab\fR command. Unlike \fBgrab\fR which restricts all user interactions to one widget, with the busy command you can have more than one widget active (for example, a "cancel" dialog and a "help" button). .SH EXAMPLE You can make several widgets busy by simply making its ancestor widget busy using the \fBhold\fR operation. .CS frame .top button .top.button; canvas .top.canvas pack .top.button .top.canvas pack .top . . . busy hold .top update .CE All the widgets within \f(CW.top\fR (including \f(CW.top\fR) are now busy. Using \fBupdate\fR insures that \fBbusy\fR command will take effect before any other user events can occur. .PP When the application is no longer busy processing, you can allow user interactions again by the \fBrelease\fR operation. .nf \f(CW busy release .top \fR .fi The busy window has a configurable cursor. You can change the busy cursor using the \fBconfigure\fR operation. .nf \f(CW busy configure .top -cursor "watch"\fR .fi Finally, when you no longer need to the busy window, invoke the \fBforget\fR operation to free any resources it allocated. .nf \f(CW busy forget .top \fR .fi Destroying the widget will also clean up any resources allocated by the busy command. .PP .SH OPERATIONS The following operations are available for the \fBbusy\fR command: .TP \fBbusy hold \fIwindow\fR ?\fIoption value\fR?... Makes the widget \fIwindow\fR (and its descendants in the Tk window hierarchy) busy. \fIWindow\fR must be a valid path name of a Tk widget. The busy window is mapped the next time idle tasks are processed, and the widget and its descendants will be blocked from user interactions. All events in the widget window and its descendants are ignored. Normally \fBupdate\fR should be called immediately afterward to insure that the \fBhold\fR operation is in effect \fIbefore\fR the application starts its processing. The following configuration options are valid: .RS .TP \fB\-cursor \fIcursorName\fR Specifies the cursor to be displayed when the widget is made busy. \fICursorName\fR can be in any form accepted by \fBTk_GetCursor\fR. The default cursor is \f(CWwatch\fR. .RE .TP \fBbusy configure \fIwindow\fR ?\fIoption value\fR?... Queries or modifies the \fBbusy\fR command configuration options for \fIwindow\fR. \fIWindow\fR must be the path name of a widget previously made busy by the \fBhold\fR operation. If no options are specified, a list describing all of the available options for \fIwindow\fR (see \fBTk_ConfigureInfo\fR for information on the format of this list) is returned. If \fIoption\fR is specified with no \fIvalue\fR, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no \fIoption\fR is specified). If one or more \fIoption\-value\fR pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the command returns the empty string. \fIOption\fR may have any of the values accepted by the \fBhold\fR operation. .sp Please note that the option database is referenced through \fIwindow\fR. For example, if the widget \f(CW.frame\fR is to be made busy, the busy cursor can be specified for it by either \fBoption\fR command: .nf \f(CWoption add *frame.busyCursor gumby\fR \f(CWoption add *Frame.BusyCursor gumby\fR .fi .TP \fBbusy forget \fIwindow\fR ?\fIwindow\fR?... Releases resources allocated by the busy command for \fIwindow\fR, including the busy window. User events will again be received again by \fIwindow\fR. Resources are also released when \fIwindow\fR is destroyed. \fIWindow\fR must be the name of a widget specified in the \fBhold\fR operation, otherwise an error is reported. .TP \fBbusy isbusy \fR?\fIpattern\fR? Returns the pathnames of all widgets that are currently busy. If a \fIpattern\fR is given, the path names of busy widgets matching \fIpattern\fR are returned. .TP \fBbusy names \fR?\fIpattern\fR? Returns the pathnames of all widgets that have previously been made busy (i.e. a busy window is allocated and associated with the widget). It makes no difference if the window is currently busy or not. If a \fIpattern\fR is given, the path names of busy widgets matching \fIpattern\fR are returned. .TP \fBbusy release \fIwindow\fR ?\fIwindow\fR?... Restores user interactions to the widget \fIwindow\fR again. This differs from the \fBforget\fR operation in that the busy window is not destroyed, but simply unmapped. \fIWindow\fR must be the name of a widget specified in a \fBhold\fR operation, otherwise an error is reported. .TP \fBbusy status \fIwindow\fR Returns the status of a widget \fIwindow\fR previously made busy. An error is reported if \fIwindow\fR was never made busy, or the \fBforget\fR operation was invoked (i.e. does not currently have a busy window associated with it). If \fIwindow\fR is presently can not receive user interactions, \f(CW1\fR is returned, otherwise \f(CW0\fR. .sp 1 .SH BINDINGS The event blocking feature is implemented by creating and mapping a transparent window that completely covers the widget. When the busy window is mapped, it invisibly shields the widget and its hierarchy from all events that may be sent. Like Tk widgets, busy windows have widget names in the Tk window hierarchy. This means that you can use the \fBbind\fR command, to handle events in the busy window. .CS busy hold .frame.canvas bind .frame.canvas_Busy { ... } .CE .PP Normally the busy window is a sibling of the widget. The name of the busy window is "\fIwidget\f(CW_Busy\fR" where \fIwidget\fR is the name of the widget to be made busy. In the previous example, the pathname of the busy window is "\f(CW.frame.canvas_Busy\fR" The exception is when the widget is a toplevel widget (such as ".") where the busy window can't be made a sibling. The busy window is then a child of the widget named "\fIwidget\f(CW._Busy\fR" where \fIwidget\fR is the name of the toplevel widget. In the following example, the pathname of the busy window is "\f(CW._Busy\fR" .CS busy hold . bind ._Busy { ... } .CE .SH ENTER/LEAVE EVENTS Mapping and unmapping busy windows generates Enter/Leave events for all widgets they cover. Please note this if you are tracking Enter/Leave events in widgets. .SH KEYBOARD EVENTS When a widget is made busy, the widget is prevented from gaining the keyboard focus by the busy window. But if the widget already had focus, it still may received keyboard events. To prevent this, you must move focus to another window. .CS busy hold .frame label .dummy focus .dummy update .CE The above example moves the focus from .frame immediately after invoking the \fBhold\fR so that no keyboard events will be sent to \f(CW.frame\fR or any of its descendants. .SH KEYWORDS busy, keyboard events, pointer events, window, cursor