#!/usr/bin/perl
#
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 Yokogawa Electric Corporation,
# IPA (Information-technology Promotion Agency, Japan).
# All rights reserved.
# 
# Redistribution and use of this software in source and binary forms, with 
# or without modification, are permitted provided that the following 
# conditions and disclaimer are agreed and accepted by the user:
# 
# 1. Redistributions of source code must retain the above copyright 
# notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright 
# notice, this list of conditions and the following disclaimer in the 
# documentation and/or other materials provided with the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project which 
# is related to this software (hereinafter referred to as "project") nor 
# the names of the contributors may be used to endorse or promote products 
# derived from this software without specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written 
# notification to the copyrighters. However, using this software for the 
# purpose of testing or evaluating any products including merchantable 
# products may be permitted without any notification to the copyrighters.
# 
# 
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND 
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING 
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE 
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
# CONTRACT,STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 
# THE POSSIBILITY OF SUCH DAMAGE.
#
# $TAHI: ct/ipsec/RTU_C_In_2SA_SspiSipsrcDproto.seq,v 1.15 2003/05/05 19:37:41 ozoe Exp $
#
######################################################################
BEGIN {
    unshift(@INC, '../ipsec/');
    $V6evalTool::TestVersion = '$Name: REL_2_1_2 $ ';
}

use V6evalTool;
use IPSEC;

%pktdesc = (
            ### TBD
);
$IF0 = Link0;
$IF1 = Link1;

#----- check NUT type

ipsecCheckNUT(router);

#----- set SAD,SPD
vLogHTML("<FONT SIZE=3>*** Target initialization phase ***</FONT><BR>");

ipsecClearAll();

## Protocol = ESP

ipsecSetSAD(
	"src=$IPSEC::IPsecAddr{IPSEC_SG1_NET2_ADDR}" ,
	"dst=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}" ,
	"spi=0x1000" ,
	"mode=tunnel" ,
	"direction=in" ,
	"protocol=esp" ,
	"ealgo=des-cbc" ,
	"ealgokey=TAHITEST" ,
	"nsrc=$IPSEC::IPsecAddr{IPSEC_NET4_ADDR}" ,
	"ndst=$IPSEC::IPsecAddr{IPSEC_NET1_ADDR}" ,
	);

ipsecSetSPD(
	"src=$IPSEC::IPsecAddr{IPSEC_NET4_ADDR}" ,
	"dst=$IPSEC::IPsecAddr{IPSEC_NET1_ADDR}" ,
	"upperspec=any" ,
	"direction=in" ,
	"protocol=esp" ,
	"mode=tunnel" ,
	"tsrc=$IPSEC::IPsecAddr{IPSEC_SG1_NET2_ADDR}" ,
	"tdst=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}" ,
	);

## Protocol = AH

ipsecSetSAD(
	"src=$IPSEC::IPsecAddr{IPSEC_SG1_NET2_ADDR}" ,
	"dst=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}" ,
	"spi=0x1000" ,
	"mode=tunnel" ,
	"direction=in" ,
	"protocol=ah" ,
	"aalgo=hmac-md5" ,
	"aalgokey=TAHITEST89ABCDEF" ,
	"nsrc=$IPSEC::IPsecAddr{IPSEC_NET4_ADDR}" ,
	"ndst=$IPSEC::IPsecAddr{IPSEC_NET1_ADDR}" ,
	);

ipsecSetSPD(
	"src=$IPSEC::IPsecAddr{IPSEC_NET4_ADDR}" ,
	"dst=$IPSEC::IPsecAddr{IPSEC_NET1_ADDR}" ,
	"upperspec=any" ,
	"direction=in" ,
	"protocol=ah" ,
	"mode=tunnel" ,
	"tsrc=$IPSEC::IPsecAddr{IPSEC_SG1_NET2_ADDR}" ,
	"tdst=$IPSEC::IPsecAddr{IPSEC_NUT_NET0_ADDR}" ,
	);

# No SPD entry
#ipsecSetSPD(
#	"policy=nopolicy"
#	);

ipsecEnable();

#======================================================================
vLogHTML("<FONT SIZE=3>*** Target testing phase ***<FONT><BR>");
vCapture($IF0);
vCapture($IF1);

#           NET1     NET0     NET2    NET4
#  HOST1_NET1 -- NUT -- Router -- SG1 -- HOST1_NET4
#                 <====tunnel-1=== Protocol = ESP
#                 <====tunnel-2=== Protocol = AH


# <====tunnel-1===

($stat, %ret) = ipsecForwardDecap($IF0, $IF1, 
    'esptun_from_sg1_net2_echo_request_from_host1_net4_to_host1_net1_on_net0',
    'echo_request_from_host1_net4_to_host1_net1_on_net1');

if ($stat ne 'GOT_PACKET') {
    vLogHTML('TN received no decapuslated packet from NUT.<BR>');
    ipsecExitFail();
}

vLogHTML("TN received decapsulated packet from HOST1_NET4 to HOST1_NET1.<BR>");
vLogHTML("Tunnel over 1st SA bundle is available.<BR>");

# <====tunnel-2===

($stat, %ret) = ipsecForwardDecap($IF0, $IF1, 
    'ahtun_from_sg1_net2_echo_request_from_host1_net4_to_host1_net1_on_net0',
    'echo_request_from_host1_net4_to_host1_net1_on_net1');

if ($stat ne 'GOT_PACKET') {
    vLogHTML('TN received no decapuslated packet from NUT.<BR>');
    ipsecExitFail();
}

vLogHTML("TN received decapsulated packet from HOST1_NET4 to HOST1_NET1.<BR>");
vLogHTML("Tunnel over 2nd SA bundle is available.<BR>");

vLogHTML("Tunnel over coexisting two SA bundles are available.<BR>");
ipsecExitPass();


######################################################################
__END__

=head1 NAME

  RTU_C_In_2SA_SspiSipsrcDproto - Router Tunnel Mode ESP Inbound 2 SA selection, Same SPI, Same IPsrc, Different protocol

=head1 TARGET

  Router

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./RTU_C_In_2SA_SspiSipsrcDproto.seq">RTU_C_In_2SA_SspiSipsrcDproto.seq</A> [-tooloption ...] -pkt <A HREF="./RTU_C_2SA_SspiSipDproto.def">RTU_C_2SA_SspiSipDproto.def</A>
    -tooloption : v6eval tool option
  See also <A HREF="./RTU_A_common.def">RTU_A_common.def</A>, <A HREF="./RTU_E_common.def">RTU_E_common.def</A> and <A HREF="./RTU_common.def">RTU_common.def</A>
</PRE>

=end html

=head1 INITIALIZATION

=begin html
<P>
For details of Network Topology, see <A HREF="00README">00README</A>
</P>
<P>
Set NUT's SAD and SPD as following:
</P>
<PRE>
                      (Link0)  (Link1)
            NET4   NET2      NET0   NET1
  HOST1_NET4 -- SG1 -- Router -- NUT -- HOST1_NET1
                 =====tunnel======> (SA1)
                 =====tunnel======> (SA2)
</PRE>
<P>
Security Association Database (SAD) for SA1
</P>
<TABLE border="1">
  <TR>
    <TD>source address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD>destination address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD>SPI</TD>
    <TD>0x1000</TD></TR>
  <TR>
    <TD>mode</TD>
    <TD>tunnel</TD></TR>
  <TR>
    <TD>protocol</TD>
    <TD><B>ESP</B></TD></TR>
  <TR>
    <TD>ESP algorithm</TD>
    <TD>DES-CBC</TD></TR>
  <TR>
    <TD>ESP algorithm key</TD>
    <TD>TAHITEST</TD></TR>
</TABLE>
<P>
Security Association Database (SAD) for SA2
</P>
<TABLE border="1">
  <TR>
    <TD>source address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD>destination address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD>SPI</TD>
    <TD>0x1000</TD></TR>
  <TR>
    <TD>mode</TD>
    <TD>tunnel</TD></TR>
  <TR>
    <TD>protocol</TD>
    <TD><B>AH</B></TD></TR>
  <TR>
    <TD>AH algorithm</TD>
    <TD>HMAC-MD5</TD></TR>
  <TR>
    <TD>AH algorithm key</TD>
    <TD>TAHITEST89ABCDEF</TD></TR>
</TABLE>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
 Tester                      Target                      Tester
              (Link0)                     (Link1)
   |                           |                           |
   |-------------------------->|                           |
   |      ICMP Echo Request    |                           |
   |       From Host1Net4      |                           |
   |        (using SA1)        |                           |
   |                           |                           |
   |                           |-------------------------->|
   |                           |      ICMP Echo Request    |
   |                           |       From Host1Net4      |
   |                           |                           |
   |                           |                           |
   |-------------------------->|                           |
   |      ICMP Echo Request    |                           |
   |       From Host1Net4      |                           |
   |        (using SA2)        |                           |
   |                           |                           |
   |                           |-------------------------->|
   |                           |      ICMP Echo Request    |
   |                           |       From Host1Net4      |
   |                           |                           |
   |                           |                           |
   v                           v                           v
</PRE>
<OL>
  <LI>Send ICMP Echo Request FromHost1Net4 using SA1 to Link0
  <LI>Receive ICMP Echo Request FromHost1Net4 from Link1
  <LI>Send ICMP Echo Request FromHost1Net4 using SA2 to Link0
  <LI>Receive ICMP Echo Request FromHost1Net4 from Link1
</OL>
<P>
ICMP Echo Request FromHost1Net4 using SA1 to Link0
</P>
<TABLE border="1">
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD><B>AH</B></TD>
    <TD>SPI</TD>
    <TD>0x1000</TD></TR>
  <TR>
    <TD></TD>
    <TD>Algorithm</TD>
    <TD>HMAC-MD5</TD></TR>
  <TR>
    <TD></TD>
    <TD>Key</TD>
    <TD>TAHITEST89ABCDEF</TD></TR>
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>HOST1_NET4</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>HOST1_NET1</TD></TR>
  <TR>
    <TD>ICMP</TD>
    <TD>Type</TD>
    <TD>128 (Echo Request)</TD></TR>
</TABLE>
<P>
ICMP Echo Request FromHost1Net4 from Link1
</P>
<TABLE border="1">
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>HOST1_NET4</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>HOST1_NET1</TD></TR>
  <TR>
    <TD>ICMP</TD>
    <TD>Type</TD>
    <TD>128 (Echo Request)</TD></TR>
</TABLE>
<P>
ICMP Echo Request FromHost1Net6 using SA2 to Link0
</P>
<TABLE border="1">
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>SG1_NET2</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>NUT_NET0</TD></TR>
  <TR>
    <TD><B>ESP</B></TD>
    <TD>SPI</TD>
    <TD>0x1000</TD></TR>
  <TR>
    <TD></TD>
    <TD>Algorithm</TD>
    <TD>DES-CBC</TD></TR>
  <TR>
    <TD></TD>
    <TD>Key</TD>
    <TD>TAHITEST</TD></TR>
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>HOST1_NET4</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>HOST1_NET1</TD></TR>
  <TR>
    <TD>ICMP</TD>
    <TD>Type</TD>
    <TD>128 (Echo Request)</TD></TR>
</TABLE>
<P>
ICMP Echo Request FromHost1Net4 from Link1
</P>
<TABLE border="1">
  <TR>
    <TD>IP Header</TD>
    <TD>Source Address</TD>
    <TD>HOST1_NET4</TD></TR>
  <TR>
    <TD></TD>
    <TD>Destination Address</TD>
    <TD>HOST1_NET1</TD></TR>
  <TR>
    <TD>ICMP</TD>
    <TD>Type</TD>
    <TD>128 (Echo Request)</TD></TR>
</TABLE>


=end html

=head1 JUDGMENT

  PASS: Both ICMP Echo Request (using SA1, SA2) received

=head1 SEE ALSO

  perldoc V6evalTool

=begin html
<PRE>
  <A HREF="./IPSEC.html">IPSEC.html</A> IPsec Test Common Utility
</PRE>

=end html

=cut